Commit 7da83a80 ("ARM: EXYNOS: Migrate Exynos specific macros from
plat to mach") which lands in samsung tree causes build breakage
for cpufreq-exynos like following:

drivers/cpufreq/exynos-cpufreq.c: In function 'exynos_cpufreq_probe':
drivers/cpufreq/exynos-cpufreq.c:166:2: error: implicit declaration of function 'soc_is_exynos4210'
[-Werror=implicit-function-declaration]
drivers/cpufreq/exynos-cpufreq.c:168:2: error: implicit declaration of function 'soc_is_exynos4212'
[-Werror=implicit-function-declaration]
drivers/cpufreq/exynos-cpufreq.c:168:2: error: implicit declaration of function 'soc_is_exynos4412'
[-Werror=implicit-function-declaration]
drivers/cpufreq/exynos-cpufreq.c:170:2: error: implicit declaration of function 'soc_is_exynos5250'
[-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors
make[2]: *** [drivers/cpufreq/exynos-cpufreq.o] Error 1
make[2]: *** Waiting for unfinished jobs....
drivers/cpufreq/exynos4x12-cpufreq.c: In function 'exynos4x12_set_clkdiv':
drivers/cpufreq/exynos4x12-cpufreq.c:118:2: error: implicit declaration of function 'soc_is_exynos4212'
[-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors
make[2]: *** [drivers/cpufreq/exynos4x12-cpufreq.o] Error 1
make[1]: *** [drivers/cpufreq] Error 2

This fixes above error with getting SoC information via
of_machine_is_compatible() instead of soc_is_exynosXXXX().
Suggested-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com>
[kgene.kim@samsung.com: fixed typo and modified as per Viresh's suggestion]
[kgene.kim@samsung.com: Rafael agreed]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Move debug-macro.S from mach/include to include/debug where
all other common debug macros are.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

This removes the need for mach/-headers in the debug macro.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Using the lowlevel debug uart is a corner case - even more so in a
multiplatform environment. So it seems reasonable to simply let the
developer set the appropriate uart type for the debugged SoC.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

addruart from the generic debug macro is doing exactly the same using
the common lowlevel uart definition, so there is no cause for this
special casing for s3c24xx.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Exynos specific macros and declarations have been moved to
mach-exynos. Inclusion of plat/cpu.h is no more necessary.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Move Exynos specific macros to mach-exynos from plat-samsung to avoid
unnecessary dependency on plat based header files.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

'exynos_subsys' has no users. Remove this code.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Group all files compiled under common config option together.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

A common macro v7_exit_coherency_flush available which does the below
tasks in the seqeunce.
-clearing C bit
-clearing L1 cache
-exit SMP
-instruction and data synchronization

So removing the local functions which does the same thing and use the
macro instead.
Signed-off-by: Leela Krishna Amudala <leela.krishna@linaro.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
[cw00.choi@samsung.com: tested on exynos3250 based board]
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Missed some changes during re-sorting this branch.
So fixed it.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

G2D power domain also controls the CMU block of G2D. Since
clock registers can be accessed anytime for viewing
clk_summary, it can cause a system crash if g2d power domain
is disabled.
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

MAU powerdomain provides clocks for Audio sub-system block.
This block comprises of the I2S audio controller, audio DMA
blocks and Audio sub-system clock registers.

Right now, there is no way to hook up power-domains with
clock providers.  During late boot when this power-domain
gets disabled, we get following external abort.

Unhandled fault: imprecise external abort (0x1406) at 0x00000000
Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Tested-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

High speed I2C is used on Exynos5 based SoCs. Enable it.

The MMC partition for Root filesystem cannot be mounted
without this enabling HS-I2C and regulators on many boards
are connected HS-I2C bus so the regulators don't come by
default without this.

Actually, we are not able to get arndale-octa board to boot
and mount an MMC partition without this change.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Tested-by: Javi Merino <javi.merino@arm.com>
[kgene.kim@samsung.com: modified description]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

This change places MDMA1 in disabled node for Exynos5420.
If MDMA1 region is configured with secure mode, it makes
the boot failure with the following on smdk5420 board.
("Unhandled fault: imprecise external abort (0x1406) at 0x00000000")
Thus, arndale-octa board don't need to do the same thing anymore.
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Tested-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

This patch fixes the offset of CPU boot address and changes
the parameter of smc call for SMC_CMD_CPU1BOOT command on
exynos4212.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

This finally removes all remaining SAMSUNG_CLOCK conditional code
from s3c24xx architectures.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

With the move to the common clock framework completed for s3c2410, s3c2440
and s3c2442, the legacy clock code for these machines can go away too.

This also includes the legacy dclk code, as all legacy users are converted.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Convert the machines using the s3c2410 to use the new driver based
on the common clock framework instead of the legacy Samsung clock driver.

As with the s3c244x, machines using the clkout output will need a fixup
from someone with the hardware.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Convert all machines using these cpus to use the ccf clock driver
instead of the legacy Samsung clock implementation.

Some of the more esotheric machines will probably need a fixup, as they
do strange things to the clkout outputs, that I did not really understand
nor have the hardware to check.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

This adds the necessary init functions to init the clocks from the common
clock framework and necessary CONFIG_SAMSUNG_CLOCK ifdefs around the legacy
clock code.

This also includes empty stubs for the *_setup_clocks functions that are
called from the cpufreq driver on resume.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

This driver can handle the clock controllers of the socs mentioned above,
as they share a common clock tree with only small differences.

The clock structure is built according to the manuals of the included
SoCs and might include changes in comparison to the previous clock
structure.

As pll-rate-tables only the 12mhz variants are currently included.
The original code was wrongly checking for 169mhz xti values [a 0 to much
at the end], so the original 16mhz pll table would have never been
included and its values are so obscure that I have no possibility to
at least check their sane-ness. When using the formula from the manual
the resulting frequency is near the table value but still slightly off.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Describe the clock controller of s3c2410, s3c2440 and s3c2442.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Add platform device and select the correct implementation automatically
depending on wether the old samsung_clock or the common clock framework
is enabled.

This is only done for machines already using the old dclk implementation,
as everybody else should move to use dt anyway.

The machine-specific settings for the external clocks will have to be set
by somebody with knowledge about the specific hardware.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
[pebolle@tiscali.nl: pointed out typo and fixed]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

This adds a driver for controlling the external clock outputs of
s3c24xx architectures including the dclk muxes and dividers.

The driver at the moment only supports the legacy non-dt boards using these
clock outputs. The clock-output control itself is part of the system-controller
mainly controlled by the pinctrl drivers. So it should most likely be
integrated there for dt platforms.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

The s3c24xx cpufreq driver needs to change the mpll speed and was doing
this by writing raw values from a translation table into the MPLLCON
register.

Change this to use a regular clk_set_rate call when using the common
clock framework and only write the raw value in the samsung_clock case.

The s3c cpufreq driver does already aquire the mpll, so simply add a reference
to struct s3c_cpufreq_config to let set_fvco access it.

While struct clk is opaque the differenciation between samsung clock and
common clock is kept, as the samsung-clock mpll clk does not implement a
real set_rate.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Pull file locking change from Jeff Layton:
 "Only an email address change to the MAINTAINERS file"

* tag 'locks-v3.15-3' of git://git.samba.org/jlayton/linux:
  MAINTAINERS: email address change for Jeff Layton

Pull arm64 fixes from Catalin Marinas:
 "These are mostly arm64 fixes with an additional arm(64) platform fix
  for the initialisation of vexpress clocks (the latter only affecting
  arm64; the arch/arm64 code is SoC agnostic and does not rely on early
  SoC-specific calls)

   - vexpress platform clocks initialisation moved earlier following the
     arm64 move of of_clk_init() call in a previous commit
   - Default DMA ops changed to non-coherent to preserve compatibility
     with 32-bit ARM DT files.  The "dma-coherent" property can be used
     to explicitly mark a device coherent.  The Applied Micro DT file
     has been updated to avoid DMA cache maintenance for the X-Gene SATA
     controller (the only arm64 related driver with such assumption in
     -rc mainline)
   - Fixmap correction for earlyprintk
   - kern_addr_valid() fix for huge pages"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  vexpress: Initialise the sysregs before setting up the clocks
  arm64: Mark the Applied Micro X-Gene SATA controller as DMA coherent
  arm64: Use bus notifiers to set per-device coherent DMA ops
  arm64: Make default dma_ops to be noncoherent
  arm64: fixmap: fix missing sub-page offset for earlyprintk
  arm64: Fix for the arm64 kern_addr_valid() function

Pull SCSI fixes from James Bottomley:
 "This is two patches both fixing bugs in drivers (virtio-scsi and
  mpt2sas) causing an oops in certain circumstances"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] virtio-scsi: Skip setting affinity on uninitialized vq
  [SCSI] mpt2sas: Don't disable device twice at suspend.

Following arm64 commit bc3ee18a (arm64: init: Move of_clk_init to
time_init()), vexpress_osc_of_setup() is called via of_clk_init() long
before initcalls are issued. Initialising the vexpress oscillators
requires the vespress sysregs to be already initialised, so this patch
adds an explicit call to vexpress_sysreg_of_early_init() in vexpress
oscillator setup function.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Cc: Mike Turquette <mturquette@linaro.org>

Since the default DMA ops for arm64 are non-coherent, mark the X-Gene
controller explicitly as dma-coherent to avoid additional cache
maintenance.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Loc Ho <lho@apm.com>

Recently, the default DMA ops have been changed to non-coherent for
alignment with 32-bit ARM platforms (and DT files). This patch adds bus
notifiers to be able to set the coherent DMA ops (with no cache
maintenance) for devices explicitly marked as coherent via the
"dma-coherent" DT property.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Currently arm64 dma_ops is by default made coherent which makes it
opposite in default policy from arm.

Make default dma_ops to be noncoherent (same as arm), as currently there
aren't any dma-capable drivers which assumes coherent ops
Signed-off-by: Ritesh Harjani <ritesh.harjani@gmail.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Commit d57c33c5 (add generic fixmap.h) added (among other
similar things) set_fixmap_io to deal with early ioremap of devices.

More recently, commit bf4b558e (arm64: add early_ioremap support)
converted the arm64 earlyprintk to use set_fixmap_io. A side effect of
this conversion is that my virtual machines have stopped booting when
I pass "earlyprintk=uart8250-8bit,0x3f8" to the guest kernel.

Turns out that the new earlyprintk code doesn't care at all about
sub-page offsets, and just assumes that the earlyprintk device will
be page-aligned. Obviously, that doesn't play well with the above example.

Further investigation shows that set_fixmap_io uses __set_fixmap instead
of __set_fixmap_offset. A fix is to introduce a set_fixmap_offset_io that
uses the latter, and to remove the superflous call to fix_to_virt
(which only returns the value that set_fixmap_io has already given us).

With this applied, my VMs are back in business. Tested on a Cortex-A57
platform with kvmtool as platform emulation.

Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Mark Salter <msalter@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Fix for the arm64 kern_addr_valid() function to recognize
virtual addresses in the kernel logical memory map.  The
function fails as written because it does not check whether
the addresses in that region are mapped at the pmd level to
2MB or 512MB pages, continues the page table walk to the
pte level, and issues a garbage value to pfn_valid().

Tested on 4K-page and 64K-page kernels.
Signed-off-by: Dave Anderson <anderson@redhat.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Pull irq fixes from Thomas Gleixner:
 "This udpate delivers:

   - A fix for dynamic interrupt allocation on x86 which is required to
     exclude the GSI interrupts from the dynamic allocatable range.

     This was detected with the newfangled tablet SoCs which have GPIOs
     and therefor allocate a range of interrupts.  The MSI allocations
     already excluded the GSI range, so we never noticed before.

   - The last missing set_irq_affinity() repair, which was delayed due
     to testing issues

   - A few bug fixes for the armada SoC interrupt controller

   - A memory allocation fix for the TI crossbar interrupt controller

   - A trivial kernel-doc warning fix"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip: irq-crossbar: Not allocating enough memory
  irqchip: armanda: Sanitize set_irq_affinity()
  genirq: x86: Ensure that dynamic irq allocation does not conflict
  linux/interrupt.h: fix new kernel-doc warnings
  irqchip: armada-370-xp: Fix releasing of MSIs
  irqchip: armada-370-xp: implement the ->check_device() msi_chip operation
  irqchip: armada-370-xp: fix invalid cast of signed value into unsigned variable

Pull timer fixes from Thomas Gleixner:
 "This update brings along:

   - Two fixes for long standing bugs in the hrtimer code, one which
     prevents remote enqueuing and the other preventing arbitrary delays
     after a interrupt hang was detected

   - A fix in the timer wheel which prevents math overflow

   - A fix for a long standing issue with the architected ARM timer
     related to the C3STOP mechanism.

   - A trivial compile fix for nspire SoC clocksource"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timer: Prevent overflow in apply_slack
  hrtimer: Prevent remote enqueue of leftmost timers
  hrtimer: Prevent all reprogramming if hang detected
  clocksource: nspire: Fix compiler warning
  clocksource: arch_arm_timer: Fix age-old arch timer C3STOP detection issue

Merge tag 'trace-fixes-v3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fix from Steven Rostedt:
 "This is a small fix where the trigger code used the wrong
  rcu_dereference().  It required rcu_dereference_sched() instead of the
  normal rcu_dereference().  It produces a nasty RCU lockdep splat due
  to the incorrect rcu notation"
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

* tag 'trace-fixes-v3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Use rcu_dereference_sched() for trace event triggers