- 15 Dec, 2020 1 commit
-
-
Daniel Vetter authored
I wanted to look up something and noticed the hyperlink doesn't work. While fixing that also noticed a trivial kerneldoc comment typo in the same section, fix that too. Reviewed-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by:
Simon Ser <contact@emersion.fr> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201204200242.2671481-1-daniel.vetter@ffwll.ch
-
- 14 Dec, 2020 1 commit
-
-
Christian König authored
Reorder the code to fix checking if blitting is available. Signed-off-by:
Christian König <christian.koenig@amd.com> Fixes: 28a68f82 ("drm/radeon/ttm: use multihop") Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/403847/
-
- 26 Nov, 2020 3 commits
-
-
Laurentiu Palcu authored
This patch adds support for using NN interpolation scaling by setting the SCALING_FILTER plane property to 1. Otherwise, the default method is used. Signed-off-by:
Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Reviewed-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
-
Laurentiu Palcu authored
This small patch fixes a warning that I got while running coccinelle: CHECK drivers/gpu/drm/imx/dcss/dcss-plane.c drivers/gpu/drm/imx/dcss/dcss-plane.c:107:21-23: WARNING !A || A && B is equivalent to !A || B Fixes: 9021c317 ("drm/imx: Add initial support for DCSS on iMX8MQ") Signed-off-by:
-
Laurentiu Palcu authored
DCSS supports 90/180/270 degree rotations for Vivante tiled and super-tiled formats. Unfortunately, with the current code, they didn't work properly. This simple patch makes the rotations work by fixing the way the scaler is set up for 90/270 degree rotations. In this particular case, the source width and height need to be swapped since DPR is sending the buffer to scaler already rotated. Also, make sure to allow full rotations for DRM_FORMAT_MOD_VIVANTE_SUPER_TILED. Fixes: 9021c317 ("drm/imx: Add initial support for DCSS on iMX8MQ") Signed-off-by:
-
- 25 Nov, 2020 2 commits
-
-
Colin Ian King authored
The masking of val with ~MCDE_CRX1_CLKSEL_MASK is currently being ignored because there seems to be a missing bitwise-or of val in the following statement. Fix this by replacing the assignment of val with a bitwise-or. Fixes: d795fd32 ("drm/mcde: Support DPI output") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Addresses-Coverity: ("Unused valued") Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201124121528.395681-1-colin.king@canonical.com
-
Maarten Lankhorst authored
We hardcode the maximum number of shared fences to 4, instead of respecting num_fences. Use a minimum of 4, but more if num_fences is higher. This seems to have been an oversight when first implementing the api. Fixes: 04a5faa8 ("reservation: update api and add some helpers") Cc: <stable@vger.kernel.org> # v3.17+ Reported-by:
Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201124115707.406917-1-maarten.lankhorst@linux.intel.com
-
- 24 Nov, 2020 15 commits
-
-
Lukas F. Hartmann authored
The Innolux N125HCE-GN1 display is used in the MNT Reform 2.0 laptop, attached via eDP to a SN65DSI86 MIPI-DSI to eDP bridge. Signed-off-by:
Lukas F. Hartmann <lukas@mntre.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201124172604.981746-1-lukas@mntre.com
-
Lukas F. Hartmann authored
The Innolux N125HCE-GN1 display is used in the MNT Reform 2.0 laptop, attached via eDP to a SN65DSI86 MIPI-DSI to eDP bridge. This patch contains the DT binding for "innolux,n125hce-gn1". Signed-off-by:
-
Simon Ser authored
This patch fixes the following kernel-doc warnings: /home/simon/src/linux/Documentation/gpu/drm-kms:466: ./drivers/gpu/drm/drm_crtc.c:236: WARNING: Unexpected indentation. /home/simon/src/linux/Documentation/gpu/drm-kms:466: ./drivers/gpu/drm/drm_crtc.c:237: WARNING: Block quote ends without a blank line; unexpected unindent. /home/simon/src/linux/Documentation/gpu/drm-kms:472: ./drivers/gpu/drm/drm_blend.c:203: WARNING: Unexpected indentation. /home/simon/src/linux/Documentation/gpu/drm-kms:472: ./drivers/gpu/drm/drm_blend.c:204: WARNING: Block quote ends without a blank line; unexpected unindent. Signed-off-by: -
Thomas Zimmermann authored
Flushing the fbdev's shadow buffer requires vmap'ing the BO memory, which in turn requires pinning the BO. While being pinned, the BO cannot be moved into VRAM for scanout. Consequently, a concurrent modeset operation that involves the fbdev framebuffer would likely fail. Resolve this problem be acquiring the modeset lock of the planes that use the fbdev framebuffer. On non-atomic drivers, also acquire the mode-config lock. This serializes the flushing of the framebuffer with concurrent modeset operations. v2: * only acquire struct drm_fb_helper.lock in damage blitter (Daniel, Christian) Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Acked-by:
Maxime Ripard <mripard@kernel.org> Acked-by:
-
Thomas Zimmermann authored
Copy the vmap()'ed instance of struct dma_buf_map before modifying it, in case the implementation of vunmap() depends on the exact address. Signed-off-by:
-
Thomas Zimmermann authored
If the damage handling fails, restore the damage area. The next invocation of the damage worker will then perform the update. v3: * Use drm_WARN_ONCE() with an error message to print warning v2: * print a single warning if dirty callback fails (Daniel, Sebastian) * update comment Signed-off-by:
-
Thomas Zimmermann authored
Introduce a separate function for the blit code and its vmap setup. Done in preparation of additional changes. No functional changes are made. v3: * Use drm_WARN_ONCE() with an error message to print warning v2: * print a single warning if damage blitter fails Signed-off-by:
-
Thomas Zimmermann authored
Flushing the shadow framebuffer and invoking the dirty callback are two separate operations, so do them separately. The flush operation is paired with calls to vmap and vunmap. They are not needed for the dirty callback, which performs its own invocations if necessary. Signed-off-by:
-
Thomas Zimmermann authored
Returning early in the damage worker if no update is required. Makes the code more readable. No functional changes are being made. v3: * s/dirty/damage in commit message (Sam) Signed-off-by:
-
Thomas Zimmermann authored
The dirty worker handles all damage updates, instead of just calling the framebuffer's dirty callback. Rename it to damage worker. Also rename related variables accordingly. No functional changes are made. Signed-off-by:
-
Thomas Zimmermann authored
DRM client's vmap/vunmap functions don't allow for multiple vmap operations. Calling drm_client_buffer_vmap() twice returns the same mapping, then calling drm_client_buffer_vunmap() twice already unmaps on the first call. This leads to unbalanced vmap refcounts. Fix this by calling drm_gem_vmap() unconditionally in drm_client_buffer_vmap(). All drivers that support DRM clients have to implement correct ref- counting for their vmap operations, or not vunmap at all. This is the case for drivers that use CMA, SHMEM and VRAM helpers, and QXL. Other drivers are not affected. Signed-off-by:
-
Thomas Zimmermann authored
The fbdev helper's generic probe function establishes a mapping for framebuffers without shadow buffer. The clean-up function did not unmap the buffer object. Add the unmap operation. As fbdev devices are usally released during system shutdown, this has not been a problem in practice. Signed-off-by:
-
Thomas Zimmermann authored
If fbdev uses a shadow framebuffer, call the damage handler. Otherwise the update might not make it to the screen. v2: * mark virtual screen as dirty (Ville) Signed-off-by:
-
Thomas Zimmermann authored
Cached page mappings are now the default for SHMEM GEM objects. Remove the obsolete create function for cached mappings. Signed-off-by:
-
Thomas Zimmermann authored
SHMEM-buffer backing storage is allocated from system memory; which is typically cachable. The default mode for SHMEM objects is writecombine though. Unify SHMEM semantics by defaulting to cached mappings. The exception is pages imported via dma-buf. DMA memory is usually not cached. DRM drivers that require write-combined mappings set the map_wc flag in struct drm_gem_shmem_object to true. This currently affects lima, panfrost and v3d. The drivers mgag200, udl, virtio and vkms continue to use default shmem mappings. The drivers cirrus and gm12u320 change caching flags. Both used writecombine and now switch over to shmem defaults. Both drivers use SHMEM objects as shadow buffers for internal video memory, so cached mappings will not affect them negatively. v3: * set value of shmem pointer before dereferencing it in __drm_gem_shmem_create() (Dan, kernel test robot) v2: * recreate patch on top of latest SHMEM helpers * update lima, panfrost, v3d to select writecombine (Daniel, Rob) Signed-off-by:
-
- 23 Nov, 2020 4 commits
-
-
Linus Walleij authored
"val" isn't initialized on the default: errorpath. Just return from the function if this happens. Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Linus Walleij authored
This implements support for DPI output using the port node in the device tree to connect a DPI LCD display to the MCDE. The block also supports TV-out but we leave that for another day when we have a hardware using it. We implement parsing and handling of the "port" node, and follow that to the DPI endpoint. The clock divider used by the MCDE to divide down the "lcdclk" (this has been designed for TV-like frequencies) is represented by an ordinary clock provider internally in the MCDE. This idea was inspired by the PL111 solution by Eric Anholt: the divider also works very similar to the Pl111 clock divider. We take care to clear up some errors regarding the number of available formatters and their type. We have 6 DSI formatters and 2 DPI formatters. Tested on the Samsung GT-I9070 Janice mobile phone. Signed-off-by:
-
Linus Walleij authored
To be able to support DPI without messing things up we first break out the DSI set-up to a separate function. Signed-off-by:
-
Linus Walleij authored
I was confused when the graphics came out with blue penguins on the DPI panel. It turns out that the so-called "packed RGB666" mode on the DSI formatter is incorrect: this mode is the actual RGB888 mode, and the mode called RGB888 is BGR888. The claims that the MCDE had inverse RGB/BGR buffer formats was wrong, so correct this and the buggy register and everything is much more consistent, and graphics look good on all targets, both DPI and DSI. Signed-off-by:
-
- 22 Nov, 2020 9 commits
-
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a fallthrough pseudo-keyword. Link: https://github.com/KSPP/linux/issues/115Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115Signed-off-by:
-
John Stultz authored
While the system heap can return non-contiguous pages, try to allocate larger order pages if possible. This will allow slight performance gains and make implementing page pooling easier. Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Liam Mark <lmark@codeaurora.org> Cc: Laura Abbott <labbott@kernel.org> Cc: Brian Starkey <Brian.Starkey@arm.com> Cc: Hridya Valsaraju <hridya@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sandeep Patil <sspatil@google.com> Cc: Daniel Mentz <danielmentz@google.com> Cc: Chris Goldsworthy <cgoldswo@codeaurora.org> Cc: Ørjan Eide <orjan.eide@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Ezequiel Garcia <ezequiel@collabora.com> Cc: Simon Ser <contact@emersion.fr> Cc: James Jones <jajones@nvidia.com> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Reviewed-by:
Brian Starkey <brian.starkey@arm.com> Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201121235002.69945-6-john.stultz@linaro.org
-
John Stultz authored
This patch is basically a port of Ørjan Eide's similar patch for ION https://lore.kernel.org/lkml/20200414134629.54567-1-orjan.eide@arm.com/ Only sync the sg-list of dma-buf heap attachment when the attachment is actually mapped on the device. dma-bufs may be synced at any time. It can be reached from user space via DMA_BUF_IOCTL_SYNC, so there are no guarantees from callers on when syncs may be attempted, and dma_buf_end_cpu_access() and dma_buf_begin_cpu_access() may not be paired. Since the sg_list's dma_address isn't set up until the buffer is used on the device, and dma_map_sg() is called on it, the dma_address will be NULL if sync is attempted on the dma-buf before it's mapped on a device. Before v5.0 (commit 55897af6 ("dma-direct: merge swiotlb_dma_ops into the dma_direct code")) this was a problem as the dma-api (at least the swiotlb_dma_ops on arm64) would use the potentially invalid dma_address. How that failed depended on how the device handled physical address 0. If 0 was a valid address to physical ram, that page would get flushed a lot, while the actual pages in the buffer would not get synced correctly. While if 0 is an invalid physical address it may cause a fault and trigger a crash. In v5.0 this was incidentally fixed by commit 55897af6 ("dma-direct: merge swiotlb_dma_ops into the dma_direct code"), as this moved the dma-api to use the page pointer in the sg_list, and (for Ion buffers at least) this will always be valid if the sg_list exists at all. But, this issue is re-introduced in v5.3 with commit 449fa54d ("dma-direct: correct the physical addr in dma_direct_sync_sg_for_cpu/device") moves the dma-api back to the old behaviour and picks the dma_address that may be invalid. dma-buf core doesn't ensure that the buffer is mapped on the device, and thus have a valid sg_list, before calling the exporter's begin_cpu_access. Logic and commit message originally by: Ørjan Eide <orjan.eide@arm.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Liam Mark <lmark@codeaurora.org> Cc: Laura Abbott <labbott@kernel.org> Cc: Brian Starkey <Brian.Starkey@arm.com> Cc: Hridya Valsaraju <hridya@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sandeep Patil <sspatil@google.com> Cc: Daniel Mentz <danielmentz@google.com> Cc: Chris Goldsworthy <cgoldswo@codeaurora.org> Cc: Ørjan Eide <orjan.eide@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Ezequiel Garcia <ezequiel@collabora.com> Cc: Simon Ser <contact@emersion.fr> Cc: James Jones <jajones@nvidia.com> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Reviewed-by:
-
John Stultz authored
The heap-helpers code was not as generic as initially hoped and it is now not being used, so remove it from the tree. Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Liam Mark <lmark@codeaurora.org> Cc: Laura Abbott <labbott@kernel.org> Cc: Brian Starkey <Brian.Starkey@arm.com> Cc: Hridya Valsaraju <hridya@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sandeep Patil <sspatil@google.com> Cc: Daniel Mentz <danielmentz@google.com> Cc: Chris Goldsworthy <cgoldswo@codeaurora.org> Cc: Ørjan Eide <orjan.eide@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Ezequiel Garcia <ezequiel@collabora.com> Cc: Simon Ser <contact@emersion.fr> Cc: James Jones <jajones@nvidia.com> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Reviewed-by:
-
John Stultz authored
Since the heap-helpers logic ended up not being as generic as hoped, move the heap-helpers dma_buf_ops implementations into the cma_heap directly. This will allow us to remove the heap_helpers code in a following patch. Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Liam Mark <lmark@codeaurora.org> Cc: Laura Abbott <labbott@kernel.org> Cc: Brian Starkey <Brian.Starkey@arm.com> Cc: Hridya Valsaraju <hridya@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sandeep Patil <sspatil@google.com> Cc: Daniel Mentz <danielmentz@google.com> Cc: Chris Goldsworthy <cgoldswo@codeaurora.org> Cc: Ørjan Eide <orjan.eide@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Ezequiel Garcia <ezequiel@collabora.com> Cc: Simon Ser <contact@emersion.fr> Cc: James Jones <jajones@nvidia.com> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Reviewed-by:
-
John Stultz authored
In preparation for some patches to optmize the system heap code, rework the dmabuf exporter to utilize sgtables rather then pageslists for tracking the associated pages. This will allow for large order page allocations, as well as more efficient page pooling. In doing so, the system heap stops using the heap-helpers logic which sadly is not quite as generic as I was hoping it to be, so this patch adds heap specific implementations of the dma_buf_ops function handlers. Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Liam Mark <lmark@codeaurora.org> Cc: Laura Abbott <labbott@kernel.org> Cc: Brian Starkey <Brian.Starkey@arm.com> Cc: Hridya Valsaraju <hridya@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sandeep Patil <sspatil@google.com> Cc: Daniel Mentz <danielmentz@google.com> Cc: Chris Goldsworthy <cgoldswo@codeaurora.org> Cc: Ørjan Eide <orjan.eide@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Ezequiel Garcia <ezequiel@collabora.com> Cc: Simon Ser <contact@emersion.fr> Cc: James Jones <jajones@nvidia.com> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Reviewed-by:
-
- 20 Nov, 2020 5 commits
-
-
Marc Zyngier authored
Instead of moving meson_dw_hdmi_init() around which breaks existing platform, let's enable the clock meson_dw_hdmi_init() depends on. This means we don't have to worry about this clock being enabled or not, depending on the boot-loader features. Fixes: b33340e3 ("drm/meson: dw-hdmi: Ensure that clocks are enabled before touching the TOP registers") Reported-by:
"kernelci.org bot" <bot@kernelci.org> Signed-off-by:
Marc Zyngier <maz@kernel.org> Tested-by:
Guillaume Tucker <guillaume.tucker@collabora.com> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> [narmstrong: changed reported by to kernelci.org bot] Signed-off-by:
-
Marc Zyngier authored
The HDMI driver request clocks early, but never disable them, leaving the clocks on even when the driver is removed. Fix it by slightly refactoring the clock code, and register a devm action that will eventually disable/unprepare the enabled clocks. Signed-off-by:
-
Linus Walleij authored
The init sequence consist of a number of unknown settings for the display controller. This patch achieves two things: - Fix an error that must have happened when the driver was converted from the backlight subsystem: the 0xb8 configuration command was lost and added as a tail to the previous command. - Update some minor settings in some bytes here and there according to changes in the Samsung GT-I9070 and Samsung GT-S7710 code dumps. Since two other devices use these settings they probably reflect trimmings later found to be better for the display rather than customizations for these devices. Signed-off-by:
Guido Günther <agx@sigxcpu.org> Cc: Stephan Gerhold <stephan@gerhold.net> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201117175621.870085-3-linus.walleij@linaro.org
-
Linus Walleij authored
A later version of the s6e63m0 driver in the Samsung GT-I9070 vendor tree provides 28 different backlight levels making use of elaborate control of the ACL and ELVSS regulator. Implement this more fine-grained backlight control. Signed-off-by:
-
Linus Walleij authored
Fix up the format of the manufacturer command set table to be TAB-indented and lowercase. Add the MCS_TEMP_SWIRE command that we will make use of. Signed-off-by:
-
