This patch adds IPP subsystem-based rotator driver.
And Rotator supports the following features.
- Image crop operation support.
- Rotate operation support to 90, 180 or 270 degree.
- Flip operation support to vertical, horizontal or both.
  . as limitaions, the pixel format to source buffer should be
    same as the one to destination buffer and no scaler.

This driver is registered to IPP subsystem framework to be used by user side
and user can control the Rotator hardware through some interfaces of IPP
subsystem framework.

Changelog v6:
- fix build warning.

Changelog v1 ~ v5:
- added comments, code fixups and cleanups.
Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Youngjun Cho <yj44.cho@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

FIMC is stand for Fully Interfactive Mobile Camera and
supports image scaler/rotator/crop/flip/csc and input/output DMA operations
and also supports writeback and display output operations.

This driver is registered to IPP subsystem framework to be used by user side
and user can control the FIMC hardware through some interfaces of IPP subsystem
framework.

Changelog v6:
- fix build warning.

Changelog v1 ~ v5:
- add comments, code fixups and cleanups.
Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Jinyoung Jeon <jy0.jeon@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

This patch adds iommu support for IPP subsystem framework.
For this, it adds subdrv_probe/remove callback to enable or
disable ipp iommu.
We can get or put device address to a gem handle from user
through exynos_drm_gem_get/put_dma_addr().
Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Jinyoung Jeon <jy0.jeon@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

This patch adds Image Post Processing(IPP) support for exynos drm driver.

IPP supports image scaler/rotator and input/output DMA operations
using IPP subsystem framework to control FIMC, Rotator and GSC hardware
and supports some user interfaces for user side.

And each IPP-based drivers support Memory to Memory operations
with various converting. And in case of FIMC hardware, it also supports
Writeback and Display output operations through local path.

Features:
- Memory to Memory operation support.
- Various pixel formats support.
- Image scaling support.
- Color Space Conversion support.
- Image crop operation support.
- Rotate operation support to 90, 180 or 270 degree.
- Flip operation support to vertical, horizontal or both.
- Writeback operation support to display blended image of FIMD fifo on screen

A summary to IPP Subsystem operations:
First of all, user should get property capabilities from IPP subsystem
and set these properties to hardware registers for desired operations.
The properties could be pixel format, position, rotation degree and
flip operation.

And next, user should set source and destination buffer data using
DRM_EXYNOS_IPP_QUEUE_BUF ioctl command with gem handles to source and
destinition buffers.

And next, user can control user-desired hardware with desired operations
such as play, stop, pause and resume controls.

And finally, user can aware of dma operation completion and also get
destination buffer that it contains user-desried result through dequeue
command.

IOCTL commands:
- DRM_EXYNOS_IPP_GET_PROPERTY
  . get ipp driver capabilitis and id.
- DRM_EXYNOS_IPP_SET_PROPERTY
  . set format, position, rotation, flip to source and destination buffers
- DRM_EXYNOS_IPP_QUEUE_BUF
  . enqueue/dequeue buffer and make event list.
- DRM_EXYNOS_IPP_CMD_CTRL
  . play/stop/pause/resume control.

Event:
- DRM_EXYNOS_IPP_EVENT
  . a event to notify dma operation completion to user side.

Basic control flow:
Open -> Get properties -> User choose desired IPP sub driver(FIMC, Rotator
or GSCALER) -> Set Property -> Create gem handle -> Enqueue to source and
destination buffers -> Command control(Play) -> Event is notified to User
-> User gets destinition buffer complated -> (Enqueue to source and
destination buffers -> Event is notified to User) * N -> Queue/Dequeue to
source and destination buffers -> Command control(Stop) -> Free gem handle
-> Close

Changelog v1 ~ v5:
- added comments, code fixups and cleanups.
Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Jinyoung Jeon <jy0.jeon@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

This adds the of_match_table to exynos-drm fimd driver to be probed from
the device tree.

Changelog v2:
- fix build error without CONFIG_OF.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

The fimd of exynos5 SoC supports extended screen coordinate.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

The x, y coordinates of right bottom pixel cannot be negative numbers.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

There is no any reason to change fb offset when CRTC is out of screen.
Also, this fixes a typing error.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

This is an unlikely case. However to silence the following smatch error
add a NULL check:
drivers/gpu/drm/exynos/exynos_hdmi.c:2486 hdmi_probe()
error: potential NULL dereference 'match'.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Add CONFIG_OF to compile conditionally. of_match_ptr eliminates having
an #ifdef returning NULL for the case when OF is disabled.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

This patch adds support for controlling power of hdmi phy for
exynos5 soc. A special bit is provided in exynos5 for directly
switching of PHY while in exynos4, phy power needs to be controlled
through i2c settings. I2C configuration may affect the suspend to
resume and wake-up time requirements hence not added.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

This patch adds support for runtime power management for
drm mixer driver.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Shirish S <s.shirish@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

This patch adds runtime power management support for exynos drm
hdmi driver.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Shirish S <s.shirish@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

This patch fixes memory alloction(contiguous or not) and
cache mapping types(cachable or not).
For this, it converts each type from user request into dma
attribute properly.

Changelog v2:
- just code cleanup.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

For user framebuffers it's easier to just inline the
exynos_drm_framebuffer_init helper instead of trying to adjust it -
most of the things that helper sets up need to be overwritten anyway
again due to the multiple backing storage objects support exynos has,
but does not use for the fbdev.

Changelog v2:
- fix NULL point issue to first gem object of exynos drm framebuffer.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

In case of error, function arm_iommu_create_mapping() returns
ERR_PTR() and never returns NULL. The NULL test in the return
value check should be replaced with IS_ERR().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

This patch removes vaddr member from exynos_drm_overlay structure
and also relevant codes for code cleanup.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Changelog v3:
just code cleanup.

Changelog v2:
fix argument to dma_mmap_attr function.
- use pages instead of kvaddr because kvaddr is 0 with
  DMA_ATTR_NO_KERNEL_MAPPING.

Changelog v1:
When gem allocation is requested, kernel space mapping isn't needed.
But if need, such as console framebuffer, the physical pages would be
mapped with kernel space though vmap function.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

This patch releases allocated resources correctly.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Changelog v2:
Added details of original patch in chromium kernel

Changelog v1:
When fimd is turned off, we disable the clocks which will stop
the dma. Now if we remove the current framebuffer, we cannot
disable the overlay but the current framebuffer will still be freed.
When fimd resumes, the dma will continue from where it left off
and will throw a PAGE FAULT since the memory was freed.

This patch fixes the above problem by disabling the fimd windows
before disabling the fimd clocks. It also keeps track of which
windows were currently active by setting the 'resume' flag. When
fimd resumes, the window with a resume flag set is enabled again.

Now if a current fb is removed when fimd is off, fimd_win_disable
will set the 'resume' flag of that window to zero and return.
So when fimd resumes, that window will not be resumed.

This patch is based on the following two patches:
http://git.chromium.org/gitweb/?p=chromiumos/third_party/kernel.git;a=commitdiff;h=341e973c967304976a762211b6465b0074de62ef
http://git.chromium.org/gitweb/?p=chromiumos/third_party/kernel.git;a=commitdiff;h=cfa22e49b7408547c73532c4bb03de47cc034a05
These two patches are rebased onto the current kernel with
additional changes like removing 'fimd_win_commit' call from
the resume function since this is taken care by encoder
dpms, and the modification of resume flag in win_disable.
Signed-off-by: Prathyush K <prathyush.k@samsung.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Stephane Marchesin <marcheu@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

When mixer is turned off, we disable the clocks which will stop
the dma. Now if we remove the current framebuffer, we cannot
disable the overlay but the current framebuffer will still be freed.
When mixer resumes, the dma will continue from where it left off
and will throw a PAGE FAULT since the memory was freed.

This patch fixes the above problem by disabling the mixer windows
before disabling the mixer clocks. It also keeps track of which
windows were currently active by setting the 'resume' flag. When
mixer resumes, the window with a resume flag set is enabled again.

Now if a current fb is removed when mixer is off, mixer_win_disable
will set the 'resume' flag of that window to zero and return.
So when mixer resumes, that window will not be resumed.
Signed-off-by: Prathyush K <prathyush.k@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

It is more optimium to use wait queues while waiting for vsync so
that the current task is put to sleep. This way, the task wont
hog the CPU while waiting. We use wait_event_timeout and not
an interruptible function since we dont want the function to exit
when a signal is pending (e.g. drm release). This patch modifies
the wait for vblank function of fimd.
Signed-off-by: Prathyush K <prathyush.k@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

It is more optimium to use wait queues while waiting for vsync so
that the current task is put to sleep. This way, the task wont
hog the CPU while waiting. We use wait_event_timeout and not
an interruptible function since we dont want the function to exit
when a signal is pending (e.g. drm release). This patch modifies
the wait for vblank function of mixer.
Signed-off-by: Prathyush K <prathyush.k@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

The wait for vblank callback is moved from overlay_ops to
manager_ops for fimd.
Signed-off-by: Prathyush K <prathyush.k@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

The wait_for_vblank callback of hdmi and mixer is now moved from
overlay_ops to manager_ops.
Signed-off-by: Prathyush K <prathyush.k@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Changelog v2:
remove unnecessay wait_for_vblank call.
- with this patch, wait_for_vblank callback is moved from
  overlay ops to manager ops so it should be removed and
  it doesn't need to wait vblank signal at plane disable.

Changelog v1:
The wait_for_vblank callback is moved from overlay ops to manager ops
of exynos drm driver. Also, the check for DPMS OFF of encoder is
removed before calling wait_for_vblank.
Signed-off-by: Prathyush K <prathyush.k@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

With this patch, When dma_buf_unmap_attachment is called,
the pages of sgt aren't unmapped from iommu table.
Instead, when dma_buf_detach is called, that would be done.

And also removes exynos_get_sgt function used to get clone sgt
and uses attachment's sgt instead. This patch would resolve
performance deterioration issue when v4l2-based driver is using
the buffer imported from gem.

This change is derived from videobuf2-dma-contig.c
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

This patch moved the exynos-drm-hdmi platform device registration to the drm
driver. When DT is enabled, platform devices needs to be registered within the
driver code. This patch fits the requirement of both DT and Non DT based drm
drivers.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

This patch moved the exynos-drm platform device registration to the drm driver.
When DT is enabled, platform devices needs to be registered within the driver
code. This patch fits the requirement of both DT and Non DT based drm drivers.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

* 'drm-next-3.8' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: fix fence driver for dma ring when wb is disabled
  drm/radeon/si: add VM CS checker support for CP DMA
  drm/radeon/cayman: add VM CS checker support for CP DMA
  drm/radeon: add support for CP DMA packet to evergreen CS checker
  drm/radeon: add support for CP DMA packet to r6xx/r7xx CS checker
  drm/radeon: add register headers for CP DMA on r6xx-SI
  drm/radeon: improve mc_stop/mc_resume on r5xx-r7xx
  drm/radeon: fix amd afusion gpu setup aka sumo v2
  drm/radeon: do not move bo to different placement at each cs

The dma ring can't write to register thus have to write to memory
its fence value. This ensure that it doesn't try to use scratch
register for dma ring fence driver.

Should fix:
https://bugs.freedesktop.org/show_bug.cgi?id=58166Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

Need to verify for copies involving registers.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Need to verify for copies involving registers.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Currently only memory and GDS transfers are allowed.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Currently only memory to memory transfers are allowed.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Along the same lines of what was done for evergreen+
in the last kernel.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Set the proper number of tile pipe that should be a multiple of
pipe depending on the number of se engine.

Fix:
https://bugs.freedesktop.org/show_bug.cgi?id=56405
https://bugs.freedesktop.org/show_bug.cgi?id=56720

v2: Don't change sumo2
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

The bo creation placement is where the bo will be. Instead of trying
to move bo at each command stream let this work to another worker
thread that will use more advance heuristic.

agd5f: remove leftover unused variable
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

Alex writes:
"adds support for the
asynchronous DMA engines on r6xx-SI.  These engines are used
for ttm bo moves and VM page table updates currently.  They
could also be exposed via the CS ioctl for userspace use,
but I haven't had a chance to add proper CS checker patches
for them yet.  These patches have been tested extensively
internally for months, so they should be pretty solid."

* 'drm-next-3.8' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: use DMA engine for VM page table updates on SI
  drm/radeon: add dma engine support for vm pt updates on si (v2)
  drm/radeon: use DMA engine for VM page table updates on cayman/TN
  drm/radeon: add dma engine support for vm pt updates on ni (v5)
  drm/radeon: use async dma for ttm buffer moves on 6xx-SI
  drm/radeon/kms: add support for dma rings to radeon_test_moves()
  drm/radeon/kms: Add initial support for async DMA on SI
  drm/radeon/kms: Add initial support for async DMA on cayman/TN
  drm/radeon/kms: Add initial support for async DMA on evergreen
  drm/radeon/kms: Add initial support for async DMA on r6xx/r7xx