Recalculate iv only if it is needed i.e. if the last req to hw
was partial for aes-xts.
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Pointer ctx is being re-assigned with the same value as it
was initialized with. The second assignment is redundant and
can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds linux/io.h to the header list to ensure that we
get virt_to_phys on all architectures.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto/md5.c:26:0: warning: macro "MD5_DIGEST_WORDS" is not used [-Wunused-macros]
crypto/md5.c:27:0: warning: macro "MD5_MESSAGE_BYTES" is not used [-Wunused-macros]

They are never used since commit 3c7eb3cc ("md5: remove from
lib and only live in crypto").
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When a PCI device will be removed, cxgb4(LLD) will notify chcr(ULD).
Incase if it's a last pci device, chcr should un-register all the crypto
algorithms.
Signed-off-by: Devulapally Shiva Krishna <shiva@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This updates the maintainer list for chelsio crypto drivers.
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds AES driver support for the Xilinx ZynqMP SoC.
Signed-off-by: Mohan Marutirao Dhanawade <mohan.dhanawade@xilinx.com>
Signed-off-by: Kalyani Akula <kalyani.akula@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add documentation to describe Xilinx ZynqMP AES-GCM driver bindings.
Signed-off-by: Kalyani Akula <kalyani.akula@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add ZynqMP firmware AES API to perform encryption/decryption of given data.
Signed-off-by: Kalyani Akula <kalyani.akula@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

kctx_len = (ntohl(KEY_CONTEXT_CTX_LEN_V(aeadctx->key_ctx_hdr)) << 4)
                - sizeof(chcr_req->key_ctx);
can't possibly be endian-safe.  Look: ->key_ctx_hdr is __be32.  And
KEY_CONTEXT_CTX_LEN_V is "shift up by 24 bits".  On little-endian hosts it
sees
	b0 b1 b2 b3
in memory, inteprets that into b0 + (b1 << 8) + (b2 << 16) + (b3 << 24),
shifts up by 24, resulting in b0 << 24, does ntohl (byteswap on l-e),
gets b0 and shifts that up by 4.  So we get b0 * 16 - sizeof(...).

Sounds reasonable, but on b-e we get
b3 + (b2 << 8) + (b1 << 16) + (b0 << 24), shift up by 24,
yielding b3 << 24, do ntohl (no-op on b-e) and then shift up by 4.
Resulting in b3 << 28 - sizeof(...), i.e. slightly under b3 * 256M.

Then we increase it some more and pass to alloc_skb() as size.
Somehow I doubt that we really want a quarter-gigabyte skb allocation
here...

Note that when you are building those values in
#define  FILL_KEY_CTX_HDR(ck_size, mk_size, d_ck, opad, ctx_len) \
                htonl(KEY_CONTEXT_VALID_V(1) | \
                      KEY_CONTEXT_CK_SIZE_V((ck_size)) | \
                      KEY_CONTEXT_MK_SIZE_V(mk_size) | \
                      KEY_CONTEXT_DUAL_CK_V((d_ck)) | \
                      KEY_CONTEXT_OPAD_PRESENT_V((opad)) | \
                      KEY_CONTEXT_SALT_PRESENT_V(1) | \
                      KEY_CONTEXT_CTX_LEN_V((ctx_len)))
ctx_len ends up in the first octet (i.e. b0 in the above), which
matches the current behaviour on l-e.  If that's the intent, this
thing should've been
        kctx_len = (KEY_CONTEXT_CTX_LEN_G(ntohl(aeadctx->key_ctx_hdr)) << 4)
                - sizeof(chcr_req->key_ctx);
instead - fetch after ntohl() we get (b0 << 24) + (b1 << 16) + (b2 << 8) + b3,
shift it down by 24 (b0), resuling in b0 * 16 - sizeof(...) both on l-e and
on b-e.

PS: when sparse warns you about endianness problems, it might be worth checking
if there really is something wrong.  And I don't mean "slap __force cast on it"...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Kamil Konieczny <k.konieczny@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add crypto_engine support for HASH algorithms, to make use of
the engine queue.
The requests, with backlog flag, will be listed into crypto-engine
queue and processed by CAAM when free.
Only the backlog request are sent to crypto-engine since the others
can be handled by CAAM, if free, especially since JR has up to 1024
entries (more than the 10 entries from crypto-engine).
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add crypto_engine support for RSA algorithms, to make use of
the engine queue.
The requests, with backlog flag, will be listed into crypto-engine
queue and processed by CAAM when free. In case the queue is empty,
the request is directly sent to CAAM.
Only the backlog request are sent to crypto-engine since the others
can be handled by CAAM, if free, especially since JR has up to 1024
entries (more than the 10 entries from crypto-engine).
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add crypto_engine support for AEAD algorithms, to make use of
the engine queue.
The requests, with backlog flag, will be listed into crypto-engine
queue and processed by CAAM when free.
If sending just the backlog request to crypto-engine, and non-blocking
directly to CAAM, the latter requests have a better chance to be
executed since JR has up to 1024 entries, more than the 10 entries
from crypto-engine.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Integrate crypto_engine into CAAM, to make use of the engine queue.
Add support for SKCIPHER algorithms.

This is intended to be used for CAAM backlogging support.
The requests, with backlog flag (e.g. from dm-crypt) will be listed
into crypto-engine queue and processed by CAAM when free.
This changes the return codes for enqueuing a request:
-EINPROGRESS if OK, -EBUSY if request is backlogged (via
crypto-engine), -ENOSPC if the queue is full, -EIO if it
cannot map the caller's descriptor.

The requests, with backlog flag, will be listed into crypto-engine
queue and processed by CAAM when free. Only the backlog request are
sent to crypto-engine since the others can be handled by CAAM, if free,
especially since JR has up to 1024 entries (more than the 10 entries
from crypto-engine).
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Based on commit 6b80ea38 ("crypto: change transient busy return code to -ENOSPC"),
change the return code of caam_jr_enqueue function to -EINPROGRESS, in
case of success, -ENOSPC in case the CAAM is busy (has no space left
in job ring queue), -EIO if it cannot map the caller's descriptor.

Update, also, the cases for resource-freeing for each algorithm type.

This is done for later use, on backlogging support in CAAM.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Create a common rsa_priv_f_done function, which based
on private key form calls the specific unmap function.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Changed parameters for ahash_edesc_alloc function:
- remove flags since they can be computed in
ahash_edesc_alloc, the only place they are needed;
- use ahash_request instead of caam_hash_ctx, to be
able to compute gfp flags.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Create two common ahash_done_* functions with the dma
direction as parameter. Then, these 2 are called with
the proper direction for unmap.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Create a common crypt function for each skcipher/aead/gcm/chachapoly
algorithms and call it for encrypt/decrypt with the specific boolean -
true for encrypt and false for decrypt.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix a typo in a comment.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As the lifetime of the hash data matches the lifetime of the driver,
hash data can be allocated using the managed allocators.
While at it, simplify cc_hash_free() by removing an unneeded check
(hash_handle is always valid here).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As the lifetime of the cipher data matches the lifetime of the driver,
cipher data can be allocated using the managed allocators.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As the lifetime of the AEAD data matches the lifetime of the driver,
AEAD data can be allocated using the managed allocators.
While at it, simplify cc_aead_free() by removing an unneeded cast, and
an unneeded check (aead_handle is always valid here).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use the existing dev helper variable instead of plat_dev->dev.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix grammar in a comment.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix a typo in a comment.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Miscellaneous improvements:
  - Start comment blocks with "/**" to enable kerneldoc,
  - Mark parameters using "@" instead of "\param",
  - Fix typos in parameter names,
  - Add missing function names to kerneldoc headers,
  - Add missing parameter and return value descriptions.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Miscellaneous improvements:
  - Start comment blocks with "/**" to enable kerneldoc,
  - Mark parameters using "@" instead of "\param",
  - Fix copied is_dout parameter of cc_send_request(),
  - Add missing function names to kerneldoc headers,
  - Add missing parameter descriptions.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Miscellaneous improvements:
  - Start comment blocks with "/**" to enable kerneldoc,
  - Mark parameters using "@" instead of "\param",
  - Add missing function names to kerneldoc headers,
  - Add missing parameter descriptions.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Miscellaneous improvements:
  - Add missing parameter and return value descriptions.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Miscellaneous improvements:
  - Start comment blocks with "/**" to enable kerneldoc,
  - Fix descriptor type of set_dout_mlli(),
  - Fix copied config parameter of set_cipher_config1(),
  - Fix copied config parameter of set_bytes_swap(),
  - Add missing function names to kerneldoc headers,
  - Add missing parameter descriptions,
  - Remove descriptions for nonexistent parameters,
  - Add missing colons,
  - Remove references to obsolete camelcase parameter names,
  - Sort according to actual parameter order,
  - Fix grammar and spelling.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Normal comments should start with "/*".
"/**" is reserver for kerneldoc.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Extract the copy to SRAM of the initial values for a hash algorithm into
its own function, to improve readability and ease maintenance.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The cc_cipher_handle structure contains only a single member, and only
one instance exists.  Simplify the code and reduce memory consumption by
moving this member to struct cc_drvdata.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The buff_mgr_handle structure contains only a single member, and only
one instance exists.  Simplify the code and reduce memory consumption by
moving this member to struct cc_drvdata.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The cc_debugfs_ctx structure contains only a single member, and only one
instance exists.  Simplify the code and reduce memory consumption by
moving this member to struct cc_drvdata.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The cc_sram_ctx structure contains only a single member, and only one
instance exists.  Simplify the code and reduce memory consumption by
moving this member to struct cc_drvdata.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

cc_pm_suspend() and cc_pm_resume() are not used outside
drivers/crypto/ccree/cc_pm.c.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>