- 25 Jun, 2020 23 commits
-
-
Pali Rohár authored
[ Upstream commit 90c6cb4a ] Trying to change Link Status register does not have any effect as this is a read-only register. Trying to overwrite bits for Negotiated Link Width does not make sense. In future proper change of link width can be done via Lane Count Select bits in PCIe Control 0 register. Trying to unconditionally enable ASPM L0s via ASPM Control bits in Link Control register is wrong. There should be at least some detection if endpoint supports L0s as isn't mandatory. Moreover ASPM Control bits in Link Control register are controlled by pcie/aspm.c code which sets it according to system ASPM settings, immediately after aardvark driver probes. So setting these bits by aardvark driver has no long running effect. Remove code which touches ASPM L0s bits from this driver and let kernel's ASPM implementation to set ASPM state properly. Some users are reporting issues that this code is problematic for some Intel wifi cards and removing it fixes them, see e.g.: https://bugzilla.kernel.org/show_bug.cgi?id=196339 If problems with Intel wifi cards occur even after this commit, then pcie/aspm.c code could be modified / hooked to not enable ASPM L0s state for affected problematic cards. Link: https://lore.kernel.org/r/20200430080625.26070-3-pali@kernel.orgTested-by:
Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by:
Pali Rohár <pali@kernel.org> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by:
Rob Herring <robh@kernel.org> Acked-by:
Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Martin Wilck authored
[ Upstream commit 2361ae59 ] SCSI LUN passthrough code such as qemu's "scsi-block" device model pass every IO to the host via SG_IO ioctls. Currently, dm-multipath calls choose_pgpath() only in the block IO code path, not in the ioctl code path (unless current_pgpath is NULL). This has the effect that no path switching and thus no load balancing is done for SCSI-passthrough IO, unless the active path fails. Fix this by using the same logic in multipath_prepare_ioctl() as in multipath_clone_and_map(). Note: The allegedly best path selection algorithm, service-time, still wouldn't work perfectly, because the io size of the current request is always set to 0. Changing that for the IO passthrough case would require the ioctl cmd and arg to be passed to dm's prepare_ioctl() method. Signed-off-by:
Martin Wilck <mwilck@suse.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Serge Semin authored
[ Upstream commit 7b668c06 ] Standard 8250 UART ports are designed in a way so they can communicate with baud rates up to 1/16 of a reference frequency. It's expected from most of the currently supported UART controllers. That's why the former version of serial8250_get_baud_rate() method called uart_get_baud_rate() with min and max baud rates passed as (port->uartclk / 16 / UART_DIV_MAX) and ((port->uartclk + tolerance) / 16) respectively. Doing otherwise, like it was suggested in commit ("serial: 8250_mtk: support big baud rate."), caused acceptance of bauds, which was higher than the normal UART controllers actually supported. As a result if some user-space program requested to set a baud greater than (uartclk / 16) it would have been permitted without truncation, but then serial8250_get_divisor(baud) (which calls uart_get_divisor() to get the reference clock divisor) would have returned a zero divisor. Setting zero divisor will cause an unpredictable effect varying from chip to chip. In case of DW APB UART the communications just stop. Lets fix this problem by getting back the limitation of (uartclk + tolerance) / 16 maximum baud supported by the generic 8250 port. Mediatek 8250 UART ports driver developer shouldn't have touched it in the first place notably seeing he already provided a custom version of set_termios() callback in that glue-driver which took into account the extended baud rate values and accordingly updated the standard and vendor-specific divisor latch registers anyway. Fixes: 81bb549f ("serial: 8250_mtk: support big baud rate.") Signed-off-by:
Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Long Cheng <long.cheng@mediatek.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: linux-mips@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Link: https://lore.kernel.org/r/20200506233136.11842-2-Sergey.Semin@baikalelectronics.ruSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Oliver Neukum authored
[ Upstream commit 296a193b ] syzkaller reported an URB that should have been killed to be active. We do not understand it, but this should fix the issue if it is real. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Reported-by: syzbot+be5b5f86a162a6c281e6@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20200507085806.5793-1-oneukum@suse.comSigned-off-by:
-
Marek Szyprowski authored
[ Upstream commit e47bd937 ] The TOP 'aclk*_isp', 'aclk550_cam', 'gscl_wa' and 'gscl_wb' clocks must be kept enabled all the time to allow proper access to power management control for the ISP and CAM power domains. The last two clocks, although related to GScaler device and GSCL power domain, provides also the I_WRAP_CLK signal to MIPI CSIS0/1 devices, which are a part of CAM power domain and are needed for proper power on/off sequence. Currently there are no drivers for the devices, which are part of CAM and ISP power domains yet. This patch only fixes the race between disabling the unused power domains and disabling unused clocks, which randomly resulted in the following error during boot: Power domain CAM disable failed Power domain ISP disable failed Fixes: 318fa46c ("clk/samsung: exynos542x: mark some clocks as critical") Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Acked-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Russell King authored
[ Upstream commit e81c979f ] If we timeout during a message transfer, the control register may contain bits that cause an action to be set. Read-modify-writing the register leaving these bits set may trigger the hardware to attempt one of these actions unintentionally. Always clear these bits when cleaning up after a message or after a timeout. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit baaa7ebf ] This reserved space isn't committed yet but cannot be used for allocations. For userspace it has no difference from used space. See the same fix in ext4 commit f06925c7 ("ext4: report delalloc reserve as non-free in statfs for project quota"). Fixes: ddc34e32 ("f2fs: introduce f2fs_statfs_project") Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Andreas Klinger authored
[ Upstream commit dee2dabc ] Limit the output of humidity compensation to the range between 0 and 100 percent. Depending on the calibration parameters of the individual sensor it happens, that a humidity above 100 percent or below 0 percent is calculated, which don't make sense in terms of relative humidity. Add a clamp to the compensation formula as described in the datasheet of the sensor in chapter 4.2.3. Although this clamp is documented, it was never in the driver of the kernel. It depends on the circumstances (calibration parameters, temperature, humidity) if one can see a value above 100 percent without the clamp. The writer of this patch was working with this type of sensor without noting this error. So it seems to be a rare event when this bug occures. Signed-off-by:
Andreas Klinger <ak@it-klinger.de> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Viacheslav Dubeyko authored
[ Upstream commit 803e4555 ] The goal of the following command sequence is to restart the adapter. However, the tgt_stop flag remains set, indicating that the adapter is still in stopping state even after re-enabling it. echo 0x7fffffff > /sys/module/qla2xxx/parameters/logging modprobe target_core_mod modprobe tcm_qla2xxx mkdir /sys/kernel/config/target/qla2xxx mkdir /sys/kernel/config/target/qla2xxx/<port-name> mkdir /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1 echo 1 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable echo 0 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable echo 1 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable kernel: PID 1396:qla_target.c:1555 qlt_stop_phase1(): tgt_stop 0x0, tgt_stopped 0x0 kernel: qla2xxx [0001:00:02.0]-e803:1: PID 1396:qla_target.c:1567: Stopping target for host 1(c0000000033557e8) kernel: PID 1396:qla_target.c:1579 qlt_stop_phase1(): tgt_stop 0x1, tgt_stopped 0x0 kernel: PID 1396:qla_target.c:1266 qlt_schedule_sess_for_deletion(): tgt_stop 0x1, tgt_stopped 0x0 kernel: qla2xxx [0001:00:02.0]-e801:1: PID 1396:qla_target.c:1316: Scheduling sess c00000002d5cd800 for deletion 21:00:00:24:ff:7f:35:c7 <skipped> kernel: qla2xxx [0001:00:02.0]-290a:1: PID 340:qla_target.c:1187: qlt_unreg_sess sess c00000002d5cd800 for deletion 21:00:00:24:ff:7f:35:c7 <skipped> kernel: qla2xxx [0001:00:02.0]-f801:1: PID 340:qla_target.c:1145: Unregistration of sess c00000002d5cd800 21:00:00:24:ff:7f:35:c7 finished fcp_cnt 0 kernel: PID 340:qla_target.c:1155 qlt_free_session_done(): tgt_stop 0x1, tgt_stopped 0x0 kernel: qla2xxx [0001:00:02.0]-4807:1: PID 346:qla_os.c:6329: ISP abort scheduled. <skipped> kernel: qla2xxx [0001:00:02.0]-28f1:1: PID 346:qla_os.c:3956: Mark all dev lost kernel: PID 346:qla_target.c:1266 qlt_schedule_sess_for_deletion(): tgt_stop 0x1, tgt_stopped 0x0 kernel: qla2xxx [0001:00:02.0]-4808:1: PID 346:qla_os.c:6338: ISP abort end. <skipped> kernel: PID 1396:qla_target.c:6812 qlt_enable_vha(): tgt_stop 0x1, tgt_stopped 0x0 <skipped> kernel: qla2xxx [0001:00:02.0]-4807:1: PID 346:qla_os.c:6329: ISP abort scheduled. <skipped> kernel: qla2xxx [0001:00:02.0]-4808:1: PID 346:qla_os.c:6338: ISP abort end. qlt_handle_cmd_for_atio() rejects the request to send commands because the adapter is in the stopping state: kernel: PID 0:qla_target.c:4442 qlt_handle_cmd_for_atio(): tgt_stop 0x1, tgt_stopped 0x0 kernel: qla2xxx [0001:00:02.0]-3861:1: PID 0:qla_target.c:4447: New command while device c000000005314600 is shutting down kernel: qla2xxx [0001:00:02.0]-e85f:1: PID 0:qla_target.c:5728: qla_target: Unable to send command to target This patch calls qla_stop_phase2() in addition to qlt_stop_phase1() in tcm_qla2xxx_tpg_enable_store() and tcm_qla2xxx_npiv_tpg_enable_store(). The qlt_stop_phase1() marks adapter as stopping (tgt_stop == 0x1, tgt_stopped == 0x0) but qlt_stop_phase2() marks adapter as stopped (tgt_stop == 0x0, tgt_stopped == 0x1). Link: https://lore.kernel.org/r/52be1e8a3537f6c5407eae3edd4c8e08a9545ea5.camel@yadro.comReviewed-by:
Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by:
Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by:
Viacheslav Dubeyko <v.dubeiko@yadro.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Ard Biesheuvel authored
[ Upstream commit d09ddd81 ] When resizing a BAR, pci_reassign_bridge_resources() is invoked to bring the bridge windows of parent bridges in line with the new BAR assignment. This assumes the device whose BAR is being resized lives on a subordinate bus, but this is not necessarily the case. A device may live on the root bus, in which case dev->bus->self is NULL, and passing a NULL pci_dev pointer to pci_reassign_bridge_resources() will cause it to crash. So let's make the call to pci_reassign_bridge_resources() conditional on whether dev->bus->self is non-NULL in the first place. Fixes: 8bb705e3 ("PCI: Add pci_resize_resource() for resizing BARs") Link: https://lore.kernel.org/r/20200421162256.26887-1-ardb@kernel.orgSigned-off-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 7f0d5053 ] The "header->number" comes from the ioctl and it needs to be clamped to prevent out of bounds writes. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200501094011.GA960082@mwandaSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Kai-Heng Feng authored
[ Upstream commit dbd13179 ] Currently mute LED and micmute LED share the same GPIO polarity. So split the polarity for mute and micmute, in case they have different polarities. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20200430083255.5093-1-kai.heng.feng@canonical.comSigned-off-by:
-
Dan Carpenter authored
[ Upstream commit 4a4c0cfb ] Smatch complains that the "path_data->handle" variable is user controlled. It comes from iscsi_set_path() so that seems possible. It's harmless to add a limit check. The qedi->ep_tbl[] array has qedi->max_active_conns elements (which is always ISCSI_MAX_SESS_PER_HBA (4096) elements). The array is allocated in the qedi_cm_alloc_mem() function. Link: https://lore.kernel.org/r/20200428131939.GA696531@mwanda Fixes: ace7f46b ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.") Acked-by:
Manish Rangankar <mrangankar@marvell.com> Signed-off-by:
-
Linus Walleij authored
[ Upstream commit d2854bbe ] The CMA and DMA_CMA Kconfig options need to be selected by the Integrator in order to produce boot console on some Integrator systems. The REGULATOR and REGULATOR_FIXED_VOLTAGE need to be selected in order to boot the system from an external MMC card when using MMCI/PL181 from the device tree probe path. Select these things directly from the Kconfig so we are sure to be able to bring the systems up with console from any device tree. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Xiyu Yang authored
[ Upstream commit a697ae6e ] davinci_mcasp_get_dma_type() invokes dma_request_chan(), which returns a reference of the specified dma_chan object to "chan" with increased refcnt. When davinci_mcasp_get_dma_type() returns, local variable "chan" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in one exception handling path of davinci_mcasp_get_dma_type(). When chan device is NULL, the function forgets to decrease the refcnt increased by dma_request_chan(), causing a refcnt leak. Fix this issue by calling dma_release_channel() when chan device is NULL. Signed-off-by:
Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by:
Xin Tan <tanxin.ctf@gmail.com> Acked-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/1587818916-38730-1-git-send-email-xiyuyang19@fudan.edu.cnSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Jon Hunter authored
[ Upstream commit d8207c15 ] If probing the LP885x backlight fails after the regulators have been enabled, then the following warning is seen when releasing the regulators ... WARNING: CPU: 1 PID: 289 at drivers/regulator/core.c:2051 _regulator_put.part.28+0x158/0x160 Modules linked in: tegra_xudc lp855x_bl(+) host1x pwm_tegra ip_tables x_tables ipv6 nf_defrag_ipv6 CPU: 1 PID: 289 Comm: systemd-udevd Not tainted 5.6.0-rc2-next-20200224 #1 Hardware name: NVIDIA Jetson TX1 Developer Kit (DT) ... Call trace: _regulator_put.part.28+0x158/0x160 regulator_put+0x34/0x50 devm_regulator_release+0x10/0x18 release_nodes+0x12c/0x230 devres_release_all+0x34/0x50 really_probe+0x1c0/0x370 driver_probe_device+0x58/0x100 device_driver_attach+0x6c/0x78 __driver_attach+0xb0/0xf0 bus_for_each_dev+0x68/0xc8 driver_attach+0x20/0x28 bus_add_driver+0x160/0x1f0 driver_register+0x60/0x110 i2c_register_driver+0x40/0x80 lp855x_driver_init+0x20/0x1000 [lp855x_bl] do_one_initcall+0x58/0x1a0 do_init_module+0x54/0x1d0 load_module+0x1d80/0x21c8 __do_sys_finit_module+0xe8/0x100 __arm64_sys_finit_module+0x18/0x20 el0_svc_common.constprop.3+0xb0/0x168 do_el0_svc+0x20/0x98 el0_sync_handler+0xf4/0x1b0 el0_sync+0x140/0x180 Fix this by ensuring that the regulators are disabled, if enabled, on probe failure. Finally, ensure that the vddio regulator is disabled in the driver remove handler. Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Reviewed-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Bryan O'Donoghue authored
[ Upstream commit f47ab3c2 ] During the process of debugging a processor derived from the msm8916 which we found the new processor was not starting one of its PLLs. After tracing the addresses and writes that downstream was doing and comparing to upstream it became obvious that we were writing to a different register location than downstream when trying to configure the PLL. This error is also present in upstream msm8916. As an example clk-pll.c::clk_pll_recalc_rate wants to write to pll->config_reg updating the bit-field POST_DIV_RATIO. That bit-field is defined in PLL_USER_CTL not in PLL_CONFIG_CTL. Taking the BIMC PLL as an example lm80-p0436-13_c_qc_snapdragon_410_processor_hrd.pdf 0x01823010 GCC_BIMC_PLL_USER_CTL 0x01823014 GCC_BIMC_PLL_CONFIG_CTL This pattern is repeated for gpll0, gpll1, gpll2 and bimc_pll. This error is likely not apparent since the bootloader will already have initialized these PLLs. This patch corrects the location of config_reg from PLL_CONFIG_CTL to PLL_USER_CTL for all relevant PLLs on msm8916. Fixes commit 3966fab8 ("clk: qcom: Add MSM8916 Global Clock Controller support") Cc: Georgi Djakov <georgi.djakov@linaro.org> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Signed-off-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lkml.kernel.org/r/20200329124116.4185447-1-bryan.odonoghue@linaro.orgSigned-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Alex Elder authored
[ Upstream commit 6442df49 ] If ida_simple_get() returns an error when called in rproc_alloc(), put_device() is called to clean things up. By this time the rproc device type has been assigned, with rproc_type_release() as the release function. The first thing rproc_type_release() does is call: idr_destroy(&rproc->notifyids); But at the time the ida_simple_get() call is made, the notifyids field in the remoteproc structure has not been initialized. I'm not actually sure this case causes an observable problem, but it's incorrect. Fix this by initializing the notifyids field before calling ida_simple_get() in rproc_alloc(). Fixes: b5ab5e24 ("remoteproc: maintain a generic child device for each rproc") Signed-off-by:
Alex Elder <elder@linaro.org> Reviewed-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by:
Suman Anna <s-anna@ti.com> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200415204858.2448-2-mathieu.poirier@linaro.orgSigned-off-by:
-
Andy Shevchenko authored
[ Upstream commit 97b31a6f ] With DEBUG_SHIRQ enabled we have a kernel crash [ 116.482696] BUG: kernel NULL pointer dereference, address: 0000000000000000 ... [ 116.606571] Call Trace: [ 116.609023] <IRQ> [ 116.611047] complete+0x34/0x50 [ 116.614206] bmp085_eoc_irq+0x9/0x10 [bmp280] because DEBUG_SHIRQ mechanism fires an IRQ before registration and drivers ought to be able to handle an interrupt happening before request_irq() returns. Fixes: aae95394 ("iio: pressure: bmp280: add support for BMP085 EOC interrupt") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
-
Adam Honse authored
[ Upstream commit f27237c1 ] The AMD X370 and other AM4 chipsets (A/B/X 3/4/5 parts) and Threadripper equivalents have a secondary SMBus controller at I/O port address 0x0B20. This bus is used by several manufacturers to control motherboard RGB lighting via embedded controllers. I have been using this bus in my OpenRGB project to control the Aura RGB on many motherboards and ASRock also uses this bus for their Polychrome RGB controller. I am not aware of any CZ-compatible platforms which do not have the second SMBus channel. All of AMD's AM4- and Threadripper- series chipsets that OpenRGB users have tested appear to have this secondary bus. I also noticed this secondary bus is present on older AMD platforms including my FM1 home server. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202587Signed-off-by:
Adam Honse <calcprogrammer1@gmail.com> Reviewed-by:
Jean Delvare <jdelvare@suse.de> Reviewed-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Dmitry Osipenko authored
[ Upstream commit 3ef9d507 ] The microphone-jack state needs to be masked in a case of a 4-pin jack when microphone and ground pins are shorted. Presence of nvidia,headset tells that WM8903 CODEC driver should mask microphone's status if short circuit is detected, i.e headphones are inserted. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20200330204011.18465-3-digetx@gmail.comSigned-off-by:
-
Rikard Falkeborn authored
[ Upstream commit ee25d974 ] round_down() can only round to powers of 2. If round_down() is asked to round to something that is not a power of 2, incorrect results are produced. The incorrect results can be both too large and too small. Instead, use rounddown() which can round to any number. Fixes: 6a721db1 ("clk: sunxi: Add A31 clocks support") Signed-off-by:
Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Signed-off-by:
-
Enric Balletbo i Serra authored
[ Upstream commit 87c3d579 ] regmap is a library function that gets selected by drivers that need it. No driver modules should depend on it. Depending on REGMAP_I2C makes this driver only build if another driver already selected REGMAP_I2C, as the symbol can't be selected through the menu kernel configuration. Fixes: 2219a935 ("power_supply: Add TI BQ24257 charger driver") Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by:
-
- 22 Jun, 2020 17 commits
-
-
Greg Kroah-Hartman authored
-
Adrian Hunter authored
commit 85afd355 upstream. Reportedly, from 19.10 Ubuntu has begun mixing up the location of some debug symbol files, putting files expected to be in /usr/lib/debug/usr/lib into /usr/lib/debug/lib instead. Fix by adding another dso_binary_type. Example on Ubuntu 20.04 Before: $ perf record -e intel_pt//u uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.030 MB perf.data ] $ perf script --call-trace | head -5 uname 14003 [005] 15321.764958566: cbr: 42 freq: 4219 MHz (156%) uname 14003 [005] 15321.764958566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) 7f1e71cc4100 uname 14003 [005] 15321.764961566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) 7f1e71cc4df0 uname 14003 [005] 15321.764961900: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) 7f1e71cc4e18 uname 14003 [005] 15321.764963233: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) 7f1e71cc5128 After: $ perf script --call-trace | head -5 uname 14003 [005] 15321.764958566: cbr: 42 freq: 4219 MHz (156%) uname 14003 [005] 15321.764958566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) _start uname 14003 [005] 15321.764961566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) _dl_start uname 14003 [005] 15321.764961900: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) _dl_start uname 14003 [005] 15321.764963233: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) _dl_start Reported-by:
Travis Downs <travis.downs@gmail.com> Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20200526155207.9172-1-adrian.hunter@intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Masami Hiramatsu authored
commit 2ae5d0d7 upstream. Since commit 03db8b58 ("perf tools: Fix maps__find_symbol_by_name()") introduced map address range check in maps__find_symbol_by_name(), we can not get "_etext" from kernel map because _etext is placed on the edge of the kernel .text section (= kernel map in perf.) To fix this issue, this checks the address correctness by map address range information (map->start and map->end) instead of using _etext address. This can cause an error if the target inlined function is embedded in both __init function and normal function. For exaample, request_resource() is a normal function but also embedded in __init reserve_setup(). In this case, the probe point in reserve_setup() must be skipped. However, without this fix, it failes to setup all probe points: # ./perf probe -v request_resource probe-definition(0): request_resource symbol:request_resource file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Looking at the vmlinux_path (8 entries long) Using /usr/lib/debug/lib/modules/5.5.17-200.fc31.x86_64/vmlinux for symbols Open Debuginfo file: /usr/lib/debug/lib/modules/5.5.17-200.fc31.x86_64/vmlinux Try to find probe point from debuginfo. Matched function: request_resource [15e29ad] found inline addr: 0xffffffff82fbf892 Probe point found: reserve_setup+204 found inline addr: 0xffffffff810e9790 Probe point found: request_resource+0 Found 2 probe_trace_events. Opening /sys/kernel/debug/tracing//kprobe_events write=1 Opening /sys/kernel/debug/tracing//README write=0 Writing event: p:probe/request_resource _text+33290386 Failed to write event: Invalid argument Error: Failed to add events. Reason: Invalid argument (Code: -22) # With this fix, # ./perf probe request_resource reserve_setup is out of .text, skip it. Added new events: (null):(null) (on request_resource) probe:request_resource (on request_resource) You can now use it in all perf tools, such as: perf record -e probe:request_resource -aR sleep 1 # Fixes: 03db8b58 ("perf tools: Fix maps__find_symbol_by_name()") Reported-by:
Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Tested-by:
-
Masami Hiramatsu authored
commit 80526491 upstream. Fix to check kprobe blacklist address correctly with relocated address by adjusting debuginfo address. Since the address in the debuginfo is same as objdump, it is different from relocated kernel address with KASLR. Thus, 'perf probe' always misses to catch the blacklisted addresses. Without this patch, 'perf probe' can not detect the blacklist addresses on a KASLR enabled kernel. # perf probe kprobe_dispatcher Failed to write event: Invalid argument Error: Failed to add events. # With this patch, it correctly shows the error message. # perf probe kprobe_dispatcher kprobe_dispatcher is blacklisted function, skip it. Probe point 'kprobe_dispatcher' not found. Error: Failed to add events. # Fixes: 9aaf5a5f ("perf probe: Check kprobes blacklist when adding new events") Signed-off-by:
-
Masami Hiramatsu authored
commit f41ebe9d upstream. When a probe point is expanded to several places (like inlined) and if some of them are skipped because of blacklisted or __init function, those trace_events has no event name. It must be skipped while showing results. Without this fix, you can see "(null):(null)" on the list, # ./perf probe request_resource reserve_setup is out of .text, skip it. Added new events: (null):(null) (on request_resource) probe:request_resource (on request_resource) You can now use it in all perf tools, such as: perf record -e probe:request_resource -aR sleep 1 # With this fix, it is ignored: # ./perf probe request_resource reserve_setup is out of .text, skip it. Added new events: probe:request_resource (on request_resource) You can now use it in all perf tools, such as: perf record -e probe:request_resource -aR sleep 1 # Fixes: 5a51fcd1 ("perf probe: Skip kernel symbols which is out of .text") Signed-off-by:
-
H. Nikolaus Schaller authored
commit 5e02f3b3 upstream. Otherwise it will corrupt the console log during debugging. Fixes: 7b5362a6 ("w1: omap_hdq: Fix some error/debug handling.") Cc: stable@vger.kernel.org Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
H. Nikolaus Schaller <hns@goldelico.com> Link: https://lore.kernel.org/r/cd0d55749a091214106575f6e1d363c6db56622f.1590255176.git.hns@goldelico.comSigned-off-by:
-
Miquel Raynal authored
commit f5146690 upstream. nand_cleanup() is supposed to be called on error after a successful call to nand_scan() to free all NAND resources. There is no real Fixes tag applying here as the use of nand_release() in this driver predates by far the introduction of nand_cleanup() in commit d44154f9 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") which makes this change possible, hence pointing it as the commit to fix for backporting purposes, even if this commit is not introducing any bug. Fixes: d44154f9 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-41-miquel.raynal@bootlin.comSigned-off-by:
-
Álvaro Fernández Rojas authored
commit 130bbde4 upstream. First 2 bytes are used in large-page nand. Fixes: ef5eeea6 ("mtd: nand: brcm: switch to mtd_ooblayout_ops") Cc: stable@vger.kernel.org Signed-off-by:
Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by:
-
NeilBrown authored
commit 24c5efe4 upstream. gss_mech_register() calls svcauth_gss_register_pseudoflavor() for each flavour, but gss_mech_unregister() does not call auth_domain_put(). This is unbalanced and makes it impossible to reload the module. Change svcauth_gss_register_pseudoflavor() to return the registered auth_domain, and save it for later release. Cc: stable@vger.kernel.org (v2.6.12+) Link: https://bugzilla.kernel.org/show_bug.cgi?id=206651Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
NeilBrown authored
commit d47a5dc2 upstream. There is no valid case for supporting duplicate pseudoflavor registrations. Currently the silent acceptance of such registrations is hiding a bug. The rpcsec_gss_krb5 module registers 2 flavours but does not unregister them, so if you load, unload, reload the module, it will happily continue to use the old registration which now has pointers to the memory were the module was originally loaded. This could lead to unexpected results. So disallow duplicate registrations. Link: https://bugzilla.kernel.org/show_bug.cgi?id=206651 Cc: stable@vger.kernel.org (v2.6.12+) Signed-off-by:
-
Masahiro Yamada authored
commit 4b50c8c4 upstream. This code does not work as stated in the comment. $(CONFIG_MODVERSIONS) is always empty because it is expanded before include/config/auto.conf is included. Hence, 'make modules' with CONFIG_MODVERSION=y cannot record the version CRCs. This has been broken since 2003, commit ("kbuild: Enable modules to be build using the "make dir/" syntax"). [1] [1]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=15c6240cdc44bbeef3c4797ec860f9765ef4f1a7 Cc: linux-stable <stable@vger.kernel.org> # v2.5.71+ Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
-
Michael Ellerman authored
commit 912c0a7f upstream. At boot the FSCR is initialised via one of two paths. On most systems it's set to a hard coded value in __init_FSCR(). On newer skiboot systems we use the device tree CPU features binding, where firmware can tell Linux what bits to set in FSCR (and HFSCR). In both cases the value that's configured at boot is not propagated into the init_task.thread.fscr value prior to the initial fork of init (pid 1), which means the value is not used by any processes other than swapper (the idle task). For the __init_FSCR() case this is OK, because the value in init_task.thread.fscr is initialised to something sensible. However it does mean that the value set in __init_FSCR() is not used other than for swapper, which is odd and confusing. The bigger problem is for the device tree CPU features case it prevents firmware from setting (or clearing) FSCR bits for use by user space. This means all existing kernels can not have features enabled/disabled by firmware if those features require setting/clearing FSCR bits. We can handle both cases by saving the FSCR value into init_task.thread.fscr after we have initialised it at boot. This fixes the bug for device tree CPU features, and will allow us to simplify the initialisation for the __init_FSCR() case in a future patch. Fixes: 5a61ef74 ("powerpc/64s: Support new device tree binding for discovering CPU features") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200527145843.2761782-3-mpe@ellerman.id.auSigned-off-by:
-
Michael Ellerman authored
commit 993e3d96 upstream. The device tree CPU features binding includes FSCR bit numbers which Linux is instructed to set by firmware. Whether that's a good idea or not, in the case of the DSCR the Linux implementation has a hard requirement that the FSCR_DSCR bit not be set by default. We use it to track when a process reads/writes to DSCR, so it must be clear to begin with. So if firmware tells us to set FSCR_DSCR we must ignore it. Currently this does not cause a bug in our DSCR handling because the value of FSCR that the device tree CPU features code establishes is only used by swapper. All other tasks use the value hard coded in init_task.thread.fscr. However we'd like to fix that in a future commit, at which point this will become necessary. Fixes: 5a61ef74 ("powerpc/64s: Support new device tree binding for discovering CPU features") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by:
-
Michael Ellerman authored
commit 93900337 upstream. create_cpu_loop() calls smu_sat_get_sdb_partition() which does kmalloc() and returns the allocated buffer. In fact it's called twice, and neither buffer is freed. This results in a memory leak as reported by Erhard: unreferenced object 0xc00000047081f840 (size 32): comm "kwindfarm", pid 203, jiffies 4294880630 (age 5552.877s) hex dump (first 32 bytes): c8 06 02 7f ff 02 ff 01 fb bf 00 41 00 20 00 00 ...........A. .. 00 07 89 37 00 a0 00 00 00 00 00 00 00 00 00 00 ...7............ backtrace: [<0000000083f0a65c>] .smu_sat_get_sdb_partition+0xc4/0x2d0 [windfarm_smu_sat] [<000000003010fcb7>] .pm112_wf_notify+0x104c/0x13bc [windfarm_pm112] [<00000000b958b2dd>] .notifier_call_chain+0xa8/0x180 [<0000000070490868>] .blocking_notifier_call_chain+0x64/0x90 [<00000000131d8149>] .wf_thread_func+0x114/0x1a0 [<000000000d54838d>] .kthread+0x13c/0x190 [<00000000669b72bc>] .ret_from_kernel_thread+0x58/0x64 unreferenced object 0xc0000004737089f0 (size 16): comm "kwindfarm", pid 203, jiffies 4294880879 (age 5552.050s) hex dump (first 16 bytes): c4 04 01 7f 22 11 e0 e6 ff 55 7b 12 ec 11 00 00 ...."....U{..... backtrace: [<0000000083f0a65c>] .smu_sat_get_sdb_partition+0xc4/0x2d0 [windfarm_smu_sat] [<00000000b94ef7e1>] .pm112_wf_notify+0x1294/0x13bc [windfarm_pm112] [<00000000b958b2dd>] .notifier_call_chain+0xa8/0x180 [<0000000070490868>] .blocking_notifier_call_chain+0x64/0x90 [<00000000131d8149>] .wf_thread_func+0x114/0x1a0 [<000000000d54838d>] .kthread+0x13c/0x190 [<00000000669b72bc>] .ret_from_kernel_thread+0x58/0x64 Fix it by rearranging the logic so we deal with each buffer separately, which then makes it easy to free the buffer once we're done with it. Fixes: ac171c46 ("[PATCH] powerpc: Thermal control for dual core G5s") Cc: stable@vger.kernel.org # v2.6.16+ Reported-by:
Erhard F. <erhard_f@mailbox.org> Signed-off-by:
-
Jonathan Bakker authored
commit 869d42e6 upstream. SDHCI1 is connected to a BCM4329 WiFi/BT chip which requires power to be kept over suspend. As the surrounding hardware supports this, mark it as such. This fixes WiFi after a suspend/resume cycle. Fixes: 17064246 ("ARM: dts: s5pv210: Add initial DTS for Samsung Aries based phones") Cc: <stable@vger.kernel.org> Signed-off-by:
Jonathan Bakker <xc-racer2@live.ca> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Ludovic Desroches authored
commit baa998ae upstream. The gpio property for the vbus pin doesn't match the pinctrl and is not correct. Signed-off-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Fixes: 42ed5355 "ARM: dts: at91: introduce the sama5d2 ptc ek board" Cc: stable@vger.kernel.org # 4.19 and later Link: https://lore.kernel.org/r/20200401221947.41502-1-ludovic.desroches@microchip.comSigned-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Marek Szyprowski authored
commit 8807d356 upstream. GPIO lines for the CM36651 sensor I2C bus use the normal not the inverted polarity. This bug has been there since adding the CM36651 sensor by commit 85cb4e0b ("ARM: dts: add cm36651 light/proximity sensor node for exynos4412-trats2"), but went unnoticed because the "i2c-gpio" driver ignored the GPIO polarity specified in the device-tree. The recent conversion of "i2c-gpio" driver to the new, descriptor based GPIO API, automatically made it the DT-specified polarity aware, what broke the CM36651 sensor operation. Fixes: 85cb4e0b ("ARM: dts: add cm36651 light/proximity sensor node for exynos4412-trats2") CC: stable@vger.kernel.org # 4.16+ Signed-off-by:
-
