- 04 Jun, 2010 40 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: serial: add support for various Titan PCI cards vt_ioctl: return -EFAULT on copy_from_user errors serial: altera_uart: Proper section for altera_uart_remove tty: fix a little bug in scrup, vt.c altera_uart: Simplify altera_uart_console_putc altera_uart: Don't take spinlock in already protected functions TTY/n_gsm: potential double lock serial: bfin_5xx: fix typo in IER check serial: bfin_5xx: IRDA is not affected by anomaly 05000230 serial_cs: add and sort IDs for serial and modem cards msm_serial: fix serial on trout
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: unbind all interfaces before rebinding them USB: serial: digi_acceleport: Eliminate a NULL pointer dereference usb: fix ehci_hcd build failure when both generic-OF and xilinx is selected USB: cdc-acm: fix resource reclaim in error path of acm_probe USB: ftdi_sio: fix DTR/RTS line modes USB: s3c-hsotg: Ensure FIFOs are fully flushed after layout USB: s3c-hsotg: SoftDisconnect minimum 3ms USB: s3c-hsotg: Ensure TX FIFO addresses setup when initialising FIFOs USB: s3c_hsotg: define USB_GADGET_DUALSPEED in Kconfig USB: s3c: Enable soft disconnect during initialization USB: xhci: Print NEC firmware version. USB: xhci: Wait for host to start running. USB: xhci: Wait for controller to be ready after reset. USB: isp1362: fix inw warning on Blackfin systems USB: mos7840: fix null-pointer dereference
-
Cory Maccarrone authored
Remove a BUG_ON for when interrupts are disabled during an MMC request. During boot, interrupts can be disabled when a request is made, causing this bug to be triggered. In reality, there's no reason this should halt the kernel, as the driver has proved reliable in spite of disabled interrupts, and additionally, there's nothing in this code that would require interrupts to be enabled. The only setup I've managed to make it trigger on is on the HTC Herald during bootup when the driver is built into the kernel (mostly because that's all I have). I believe it's related to the fact that on bootup I get many timeout errors on "CMD5" while initializing the card. Each CMD5 timeout triggers that bug (I changed it to a WARN_ON to get it to boot in) due to the fact that part of the timeout code involves sending the request again. With interrupts turned off, that BUG would be triggered. Signed-off-by:
Cory Maccarrone <darkstar6262@gmail.com> Acked-by:
Tony Lindgren <tony@atomide.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
KOSAKI Motohiro authored
Greg Thelen reported recent Johannes's stack diet patch makes kernel hang. His test is following. mount -t cgroup none /cgroups -o memory mkdir /cgroups/cg1 echo $$ > /cgroups/cg1/tasks dd bs=1024 count=1024 if=/dev/null of=/data/foo echo $$ > /cgroups/tasks echo 1 > /cgroups/cg1/memory.force_empty Actually, This OOM hard to try logic have been corrupted since following two years old patch. commit a41f24ea Author: Nishanth Aravamudan <nacc@us.ibm.com> Date: Tue Apr 29 00:58:25 2008 -0700 page allocator: smarter retry of costly-order allocations Original intention was "return success if the system have shrinkable zones though priority==0 reclaim was failure". But the above patch changed to "return nr_reclaimed if .....". Oh, That forgot nr_reclaimed may be 0 if priority==0 reclaim failure. And Johannes's patch 0aeb2339 ("vmscan: remove all_unreclaimable scan control") made it more corrupt. Originally, priority==0 reclaim failure on memcg return 0, but this patch changed to return 1. It totally confused memcg. This patch fixes it completely. Reported-by:
Greg Thelen <gthelen@google.com> Signed-off-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Tested-by:
Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by:
-
Akinobu Mita authored
The commit 80b5184c ("kernel/: convert cpu notifier to return encapsulate errno value") changed the return value of cpu notifier callbacks. Those callbacks don't return NOTIFY_BAD on failures anymore. But there are a few callbacks which are called directly at init time and checking the return value. I forgot to change BUG_ON checking by the direct callers in the commit. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Greg Thelen authored
Child groups should have a greater depth than their parents. Prior to this change, the parent would incorrectly report zero memory usage for child cgroups when use_hierarchy is enabled. test script: mount -t cgroup none /cgroups -o memory cd /cgroups mkdir cg1 echo 1 > cg1/memory.use_hierarchy mkdir cg1/cg11 echo $$ > cg1/cg11/tasks dd if=/dev/zero of=/tmp/foo bs=1M count=1 echo echo CHILD grep cache cg1/cg11/memory.stat echo echo PARENT grep cache cg1/memory.stat echo $$ > tasks rmdir cg1/cg11 cg1 cd / umount /cgroups Using fae9c791, a recent patch that changed alloc_css_id() depth computation, the parent incorrectly reports zero usage: root@ubuntu:~# ./test 1+0 records in 1+0 records out 1048576 bytes (1.0 MB) copied, 0.0151844 s, 69.1 MB/s CHILD cache 1048576 total_cache 1048576 PARENT cache 0 total_cache 0 With this patch, the parent correctly includes child usage: root@ubuntu:~# ./test 1+0 records in 1+0 records out 1048576 bytes (1.0 MB) copied, 0.0136827 s, 76.6 MB/s CHILD cache 1052672 total_cache 1052672 PARENT cache 0 total_cache 1052672 Signed-off-by:
Paul Menage <menage@google.com> Acked-by:
Li Zefan <lizf@cn.fujitsu.com> Cc: <stable@kernel.org> [2.6.34.x] Signed-off-by:
-
Heiko Carstens authored
Add s390 to list of architectures that have atomic64_dec_if_positive implemented so we get rid of this warning: lib/atomic64_test.c:129:2: warning: #warning Please implement atomic64_dec_if_positive for your architecture, and add it to the IF above Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Luca Barbieri <luca@luca-barbieri.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
Commit f6014419 ("imxfb: add support for i.MX25:) has inserted the symbol HAVE_FB_IMX, which does not depend on FB after the menuconfig FB. This breaks the menu, presenting most of the drivers outside of it, when using menuconfig. Moving the symbol to the start of the file, just like HAVE_FB_ATMEL, fixes the problem without breaking it for iMX25 configurations (tested with ARCH=arm, no build). Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Baruch Siach <baruch@tkos.co.il> Cc: "David S. Miller" <davem@davemloft.net> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Cesar Eduardo Barros authored
kunmap_atomic() takes a pointer to within the page, not the struct page. Signed-off-by:
Cesar Eduardo Barros <cesarb@cesarb.net> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
Oleg Nesterov authored
task_struct->pesonality is "unsigned int", but sys_personality() paths use "unsigned long pesonality". This means that every assignment or comparison is not right. In particular, if this argument does not fit into "unsigned int" __set_personality() changes the caller's personality and then sys_personality() returns -EINVAL. Turn this argument into "unsigned int" and avoid overflows. Obviously, this is the user-visible change, we just ignore the upper bits. But this can't break the sane application. There is another thing which can confuse the poorly written applications. User-space thinks that this syscall returns int, not long. This means that the returned value can be negative and look like the error code. But note that libc won't be confused and thus errno won't be set, and with this patch the user-space can never get -1 unless sys_personality() really fails. And, most importantly, the negative RET != -1 is only possible if that app previously called personality(RET). Pointed-out-by:
Wenming Zhang <wezhang@redhat.com> Suggested-by:
Oleg Nesterov <oleg@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
-
Albert Herranz authored
As pointed by Nick Piggin, ->page_mkwrite provides a way to keep a page locked until the associated PTE is marked dirty. Re-implement the fix by using this mechanism. Signed-off-by:
Albert Herranz <albert_herranz@yahoo.es> Acked-by:
Jaya Kumar <jayakumar.lkml@gmail.com> Acked-by:
Nick Piggin <npiggin@suse.de> Signed-off-by:
-
Albert Herranz authored
This reverts commit 49bbd815 ("fb_defio: fix for non-dirty ptes"). Although the fix provided is correct, it's been suggested to avoid the underlying race in the same way as it is currently done in filesystems like NFS, for maintainability. A following patch "fb_defio: redo fix for non-dirty ptes" will provide such an alternate fix. Signed-off-by:
-
Mike Frysinger authored
The data chunk is mmaped with 'len' which remains unchanged, so use that when unmapping in the error path rather than trying to recalculate (and incorrectly so) the value used originally. Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Acked-by:
David McCullough <davidm@snapgear.com> Acked-by:
Greg Ungerer <gerg@uclinux.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Mike Frysinger authored
The stack and data have different alignment requirements, so don't force them to wear the same shoe. Increase the data alignment to match that which the elf2flt linker script has always been using: 0x20 bytes. Not only does this bring the kernel loader in line with the toolchain, but it also fixes a swath of gcc tests which try to force larger alignment values but randomly fail when the FLAT loader fails to deliver. Signed-off-by:
Michal Simek <monstr@monstr.eu> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jie Zhang <jie@codesourcery.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by:
-
Dmitry Torokhov authored
Limit number of accumulated non-balloonable pages during inflation cycle, otherwise there is a chance we will be spinning and growing the list forever. This happens during torture tests when balloon target changes while we are in the middle of inflation cycle and monitor starts refusing to lock pages (since they are not needed anymore). Signed-off-by:
Dmitry Torokhov <dtor@vmware.com> Acked-by:
Bhavesh Davda <bhavesh@vmware.com> Cc: <stable@kernel.org> Signed-off-by:
-
Nick Piggin authored
As explained in commit 1c0fe6e3 ("mm: invoke oom-killer from page fault") , we want to call the architecture independent oom killer when getting an unexplained OOM from handle_mm_fault, rather than simply killing current. Signed-off-by:
David Rientjes <rientjes@google.com> Cc: Chris Zankel <chris@zankel.net> Signed-off-by:
-
Nick Piggin authored
As explained in commit 1c0fe6e3 ("mm: invoke oom-killer from page fault") , we want to call the architecture independent oom killer when getting an unexplained OOM from handle_mm_fault, rather than simply killing current. Signed-off-by:
-
Nick Piggin authored
As explained in commit 1c0fe6e3 ("mm: invoke oom-killer from page fault") , we want to call the architecture independent oom killer when getting an unexplained OOM from handle_mm_fault, rather than simply killing current. Signed-off-by:
-
Nick Piggin authored
As explained in commit 1c0fe6e3 ("mm: invoke oom-killer from page fault") , we want to call the architecture independent oom killer when getting an unexplained OOM from handle_mm_fault, rather than simply killing current. Signed-off-by:
-
Heiko Carstens authored
The driver fails to compile on s390: drivers/char/ramoops.c: In function 'ramoops_init': drivers/char/ramoops.c:122: error: implicit declaration of function 'ioremap' Since we won't make use of the driver anyway on s390 just let it depend on HAS_IOMEM. Signed-off-by:
-
Heiko Carstens authored
A call to access_ok is missing a compat_ptr conversion. Introduced with b8373363 "compat: factor out compat_rw_copy_check_uvector from compat_do_readv_writev" fs/compat.c: In function 'compat_rw_copy_check_uvector': fs/compat.c:629: warning: passing argument 1 of '__access_ok' makes pointer from integer without a cast Signed-off-by:
Jeff Moyer <jmoyer@redhat.com> Cc: <stable@kernel.org> Signed-off-by:
-
Maurus Cuelenaere authored
Make sure s3c_rtc_cpu_type is initialised _before_ it's used in an if() check. Reported-by:
Jiri Pinkava <jiri.pinkava@vscht.cz> Signed-off-by:
Maurus Cuelenaere <mcuelenaere@gmail.com> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by:
-
Maurus Cuelenaere authored
s3c_rtc_setfreq() uses the platform driver data to derive struct rtc_device, so make sure drvdata is set _before_ s3c_rtc_setfreq() is called. Signed-off-by:
-
Yegor Yefremov authored
serial: add support for various Titan PCI cards Models: 200I, 400I, 800I, 400EH, 800EH, 800EHB, 100E, 200E, 400E, 800E, 200EI, 200EISI Signed-off-by:Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Dan Carpenter authored
copy_from_user() returns the number of bytes remaining but we want to return a negative error code here. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Tobias Klauser authored
altera_uart_remove should be in .devexit.text Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
Frank Pan authored
The code uses vc->vc_cols instead of vc->vc_size_row by mistake, it will cause half of the region which is going to clear remain uncleared. The issue happens in background consoles, so it's hard to observe. Frank Pan Signed-off-by:
Frank Pan <frankpzh@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
Tobias Klauser authored
The check for the TRDY flag after writing the character is not needed. Also do a cpu_relax() inside the loop. Pass a struct uart_port to altera_uart_console_putc, so we do not need to get it (and dereference pointers) for every character. Cc: Thomas Chou <thomas@wytron.com.tw> Signed-off-by:
-
Tobias Klauser authored
Don't take the port spinlock in uart functions where the serial core already takes care of locking/unlocking them. The code would actually lock up on architectures where spinlocks are implemented (not the case on nios2 where this driver is primarily used for now, thus this bug didn't trigger). Also protect calling altera_uart_rx_chars/altera_uart_tx_chars in the interrupt handler by the port spinlock. Thanks to Ian Abbott for pointing these issues out. Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Thomas Chou <thomas@wytron.com.tw> Signed-off-by:
-
Dan Carpenter authored
In gsm_dlci_data_kick() we call gsm_dlci_data_sweep() with the "gsm->tx_lock" held so we can't lock it again inside gsm_dlci_data_sweep(). I removed that lock from and added one to gsmld_write_wakeup() instead. The sweep function is only called from those two places. Signed-off-by:
Alan Cox <alan@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
Sonic Zhang authored
This most likely won't cause problems on systems as people don't typically enable GPIO RTS/CTS if they don't actually use it. Signed-off-by:
Sonic Zhang <sonic.zhang@analog.com> Signed-off-by:
-
Graf Yang authored
Anomaly 05000230 (over sampling of the UART STOP bit) applies only when the peripheral is operating in UART mode. So drop the anomaly handling when the UART is in IRDA mode. Signed-off-by:
Graf Yang <graf.yang@analog.com> Signed-off-by:
-
Alexander Kurz authored
Signed-off-by:
Alexander Kurz <linux@kbdbabel.org> Signed-off-by:
-
Abhijeet Dharmapurikar authored
Set the mnd counter based on uartclk. This fixes a problem on 7x30 where the uartclk is 19.2Mhz rather than the usual 4.8Mhz. Trout incorrectly reports uartclk to be running at 19.2Mhz It is actually running at 4.8Mhz. For trout force mnd counter values as if uartclk was fed by tcxo/4. Signed-off-by:
Abhijeet Dharmapurikar <adharmap@codeaurora.org> [dwalker@codeaurora.org: inlined, moved into header, added comments.] Signed-off-by:
Daniel Walker <dwalker@codeaurora.org> Signed-off-by:
-
Alan Stern authored
This patch (as1387) fixes a bug introduced during the changeover to the runtime PM framework. When a driver doesn't support resume or reset-resume, and consequently its interfaces need to be unbound and rebound, we have to unbind all the interfaces before trying to rebind any of them. Otherwise the driver's probe method for one interface could try to claim a different interface and fail, because that other interface hasn't been unbound yet. This fixes Bugzilla #15788. The symptom is that some USB sound cards don't work after hibernation. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Tested-by:
François Valenduc <francois.valenduc@tvcablenet.be> Cc: stable <stable@kernel.org> [.34] Signed-off-by:
-
Julia Lawall authored
If port is NULL, then the call to dev_err will dereference a value that is a small offset from NULL. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression E,E1; identifier f; statement S1,S2,S3; @@ if ((E == NULL && ...) || ...) { ... when != if (...) S1 else S2 when != E = E1 * E->f ... when any return ...; } else S3 // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Grant Likely authored
This patch fixes the driver to allow both CONFIG_USB_EHCI_HCD_PPC_OF and CONFIG_USB_ECHI_HCD_XILINX to be selected. Signed-off-by:
Grant Likely <grant.likely@secretlab.ca> CC: John Linn <john.linn@xilinx.com> CC: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Axel Lin authored
This patch fixes resource reclaim in error path of acm_probe: 1. In the case of "out of memory (read urbs usb_alloc_urb)\n")", there is no need to call acm_read_buffers_free(acm) here. Fix it by goto alloc_fail6 instead of alloc_fail7. 2. In the case of "out of memory (write urbs usb_alloc_urb)", usb_alloc_urb may fail in any iteration of the for loop. Current implementation does not properly free allocated snd->urb. Fix it by goto alloc_fail8 instead of alloc_fail7. 3. In the case of device_create_file(&intf->dev,&dev_attr_iCountryCodeRelDate) fail, acm->country_codes is kfreed. As a result, device_remove_file for dev_attr_wCountryCodes will not be executed in acm_disconnect. Fix it by calling device_remove_file for dev_attr_wCountryCodes before goto skip_countries. Signed-off-by:
Axel Lin <axel.lin@gmail.com> Acked-by:
Oliver Neukum <oneukum@suse.de> Cc: stable <stable@kernel.org> Signed-off-by:
-
Daniel Mack authored
Call set_mctrl() and clear_mctrl() according to the flow control mode selected. This makes serial communication for FT232 connected devices work when CRTSCTS is not set. This fixes a regression introduced by 4175f3e3 ("tty_port: If we are opened non blocking we still need to raise the carrier"). This patch calls the low-level driver's dtr_rts() function which consequently sets TIOCM_DTR | TIOCM_RTS. A later call to set_termios() without CRTSCTS in cflags, however, does not reset these bits, and so data is not actually sent out on the serial wire. Signed-off-by:
Daniel Mack <daniel@caiaq.de> Cc: Johan Hovold <jhovold@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
Ben Dooks authored
According to the design guide, if the FIFO layout is changed, then the FIFOs must be flushed to ensure all FIFO pointers are correct. Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Signed-off-by:
-
