New DTM interface is V3 and we need to extend our existing support
to enable HDCP on DCN3.1.

Version the helpers and fallback to the older versions on failure
in the new interfaces.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The PANEL block handles embedded panel power and backlight programming.

This programming and sequencing is now owned by DMCUB and driver will
call into the interface for backlight status and programming.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

DMCU-B (Display Micro-Controller Unit B) is a display microcontroller
used for shared display functionality with BIOS and for advanced
power saving display features.

Extends the command header to include new DCN3.1 functionality.

Adds new interfaces to DC dmub interface as well for z-state support.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Extends off of DCN3.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add IRQ services for DCN3.1 to handle hardware generated interrupts.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

DML (Display mode library) is used for calculating watermarks, bandwidth
and for validating display configurations.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Adds DCN3.1 DCHHUB programming and modifies DCN20/DCN30 shared
hardware sequencer helpers to use these hooks.

HW Blocks:

 +--------++------+       +----------+
 |DCHUBBUB|| HUBP |  <--  | MMHUBBUB |
 +--------++------+       +----------+
        |                      ^
        v                      |
    +--------+             +--------+
    |  DPP   | <---------> |  DWB   |
    +--------+             +--------+
        |                      ^
        v                      |
    +--------+                 |
    |  MPC   |                 |
    +--------+                 |
        |                      |
        v                      |
    +-------+                  |
    |  OPP  |                  |
    +-------+                  |
        |                      |
        v                      |
    +--------+                /
    |  OPTC  |  --------------
    +--------+
        |
        v
    +--------+       +--------+
    |  DIO   |       |  DCCG  |
    +--------+       +--------+

No changes to MMHUBBUB or DWB programming, added to diagram for clarity.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add support for programming the DCN3.1 OPTC (Output Timing Controller)

HW Blocks:

    +--------+
    |  MPC   |
    +--------+
        |
        v
    +-------+
    |  OPP  |
    +-------+
        |
        v
    +--------+
    |  OPTC  |
    +--------+
        |
        v
    +--------+       +--------+
    |  DIO   |       |  DCCG  |
    +--------+       +--------+

There are no changes to OPP or MPC for DCN3.1, so the diagram will
include them in this patch.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add support for the DIO (Display IO) block of DCN3.1 which controls
legacy HDMI/DP stream/link encoding.

HW Blocks:

    +--------+       +--------+
    |  DIO   |       |  DCCG  |
    +--------+       +--------+

Includes some updates to core logic for link encoder assignment and
future support for new high bandwidth output.

v2: squash in unused variable fix (Alex)
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add programming of the DCCG (Display Controller Clock Generator) block:

HW Blocks:

    +--------+
    |  DCCG  |
    +--------+
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Adds support for clock requests for the various parts of the DCN3.1 IP
and the interfaces and definitions for sending messages to SMU/PMFW.

Includes new support for z9/10, detecting SMU timeout and p-state
support enablement.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why & How]
To determine whether the chip is yellow carp or not and which revision
it is.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why & How]
We'll need these in driver for phy tuning in DCN3.1.

Multiple eDP support also requires understanding which LCD the backlight
curve in atombios is for.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add video_codecs query support for yellow carp.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

PMFW provides specific messages for setting fclk freq range thus adjust
the power level. There's misusing of these messages when setting
dpm mclk. Since actually mclk could adjust automatically complying with
fclk, remove standalone support for mclk dpm level setting.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch adds mode2 reset support for yellow carp.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch enables editing sysfs file power_dpm_force_performance_level
for yellow carp. User could thus adjust the dpm forced level.

v2: enable fine grain control of GFXCLK only when in manual performance
level mode. In other mode, the min/max range of GFXCLK will be reset to
corresponding values.

Ex: To enable min 300MHz / max 600MHz gfx clocks

1) echo manual > /sys/bus/pci/devices/.../power_dpm_force_performance_level
2) echo s 0 300 > /sys/bus/pci/devices/.../pp_od_clk_voltage
3) echo s 1 600 > /sys/bus/pci/devices/.../pp_od_clk_voltage
4) echo c > /sys/bus/pci/devices/.../pp_od_clk_voltage
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Skip disabled sa to correct the cu_info and active_rbs for yellow carp.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Suggested-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Register callback in gfxhub functions to program the bypass groups in
gc_utcl2 corresponding to harvested SA.

v2: update comments (Alex)
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch is to add the interface to dump smu metrics table for yellow
carp.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Implement the sysfs API for getting/setting pp_power_profile_mode for
yellow carp.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add callback function to get the hard frequency range of a clock domain
for yellow carp.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add get_vbios_bootup_values function to get the bootup values for yellow
carp.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add TA firmware to module firmware list for yellow carp and call
psp_init_ta_microcode to parse the TA firmware for HDCP support.

Cc: Aaron Liu <aaron.liu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Driver needs to notify the PMFW when the RLC is disabled.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Implement the sysfs API to set a range of allowed DPM levels for
specific clock domain.

v2: return error directly if the specified clock type not supported
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Initialize the feature_enabled and feature_supported bitmap for yellow
carp.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Implement function to check if DPM is running for yellow carp.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add feature map for yellow carp.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Implement the sysfs API for getting values of pp dpm
clocks(pp_dpm_socclk/mclk/fclk/vclk/dclk) for yellow carp.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use the pp_od_clk_voltage sysfs file to configure the min and max value
of gfx clock frequency or to restore the default values.

Command guide:
echo "s level value" > pp_od_clk_voltage
        "s" - set the sclk frequency
        "level" - 0 or 1, "0" represents the min value, "1" represents
        the max value
        "value" - the target value of sclk frequency, it should be
        limited in the safe range
echo "r" > pp_od_clk_voltage
        "r" - reset the sclk frequency, restore the default value
echo "c" > pp_od_clk_voltage
        "c" - commit the min and max value of sclk frequency to the
        system only after the commit command, the setting target values
        by "s" command will take effect

Example:
1) check the default sclk frequency
        $ cat pp_od_clk_voltage
        OD_SCLK:
        0:        200Mhz
        1:        600Mhz
        OD_RANGE:
        SCLK:     200MHz       600MHz
2) use "s" -- set command to configure the min or max sclk frequency
        $ echo "s 0 300" > pp_od_clk_voltage
        $ echo "s 1 500" > pp_od_clk_voltage
        $ echo "c" > pp_od_clk_voltage
        $ cat pp_od_clk_voltage
        OD_SCLK:
        0:        300Mhz
        1:        500Mhz
        OD_RANGE:
        SCLK:     200MHz       600MHz
3) use "r" -- reset command to restore the min and max sclk frequency
        $ echo "r" > pp_od_clk_voltage
        $ echo "c" > pp_od_clk_voltage
        $ cat pp_od_clk_voltage
        OD_SCLK:
        0:        200Mhz
        1:        600Mhz
        OD_RANGE:
        SCLK:     200MHz       600MHz

v2: modify the description of reset command usage - need to do "commit"
    after set the restore command
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add callback function set_watermarks_table for yellow carp.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add callback function read_sensor for yellow carp.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Allows software to query HW counters to timestamp submissions.
This patch can address KFDPerfCountersTest.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: chen gong <curry.gong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

RLC_PG_DELAY_3 is to make RLC in safe mode to
prevent any misalignment or conflict in middle of any power
feature entry/exit sequence when CGPG feature is enabled.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add smu_post_init support for yellow carp.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable VCN 3.0 PG and CG for Yellow Carp by setting up flags.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable vcn dpg mode on yellow carp.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable vcn/jpeg IP on yellow carp.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add vcn firmware support for yellow carp
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>