There is a mix of drivers using either 'depends on HID' or 'select HID',
which causes both circular dependencies and missed dependencies for
a 'select':

WARNING: unment direct dependencies for HID
  Depends on [m]: HID_SUPPORT [=y] && INPUT [=m]
  Selected by [y]:
  - AMD_SFH_HID [=y] && HID_SUPPORT [=y] && (X86_64 || COMPILE_TEST [=y]) && PCI [=y]
  Selected by [m]:
  - I2C_HID_CORE [=m] && HID_SUPPORT [=y]

WARNING: unmet direct dependencies detected for INPUT_FF_MEMLESS
  Depends on [m]: INPUT [=m]
  Selected by [y]:
  - DRAGONRISE_FF [=y] && HID_SUPPORT [=y] && HID [=y] && HID_DRAGONRISE [=y]
  - HID_MICROSOFT [=y] && HID_SUPPORT [=y] && HID [=y]
  - GREENASIA_FF [=y] && HID_SUPPORT [=y] && HID [=y] && HID_GREENASIA [=y]
  Selected by [m]:
  - INPUT_ARIZONA_HAPTICS [=m] && INPUT [=m] && INPUT_MISC [=y] && MFD_ARIZONA [=y] && SND_SOC [=m]
  - INPUT_PM8XXX_VIBRATOR [=m] && INPUT [=m] && INPUT_MISC [=y] && (MFD_PM8XXX [=m] || MFD_SPMI_PMIC [=n])
  - INPUT_MAX8997_HAPTIC [=m] && INPUT [=m] && INPUT_MISC [=y] && PWM [=y] && MFD_MAX8997 [=y]
  - INPUT_GPIO_VIBRA [=m] && INPUT [=m] && INPUT_MISC [=y] && (GPIOLIB [=y] || COMPILE_TEST [=y])
  - INPUT_REGULATOR_HAPTIC [=m] && INPUT [=m] && INPUT_MISC [=y] && REGULATOR [=y]
  - INPUT_TWL6040_VIBRA [=m] && INPUT [=m] && INPUT_MISC [=y] && TWL6040_CORE [=y]
  - INPUT_PWM_VIBRA [=m] && INPUT [=m] && INPUT_MISC [=y] && PWM [=y]
  - INPUT_DRV260X_HAPTICS [=m] && INPUT_MISC [=y] && INPUT [=m] && I2C [=y] && (GPIOLIB [=y] || COMPILE_TEST [=y])
  - INPUT_DRV2665_HAPTICS [=m] && INPUT_MISC [=y] && INPUT [=m] && I2C [=y]
  - INPUT_DRV2667_HAPTICS [=m] && INPUT_MISC [=y] && INPUT [=m] && I2C [=y]
  - INPUT_SC27XX_VIBRA [=m] && INPUT [=m] && INPUT_MISC [=y] && (MFD_SC27XX_PMIC [=y] || COMPILE_TEST [=y])
  - HID_MAYFLASH [=m] && HID_SUPPORT [=y] && HID [=y]

Avoid this by changing all HID client drivers to use 'depends on HID'.
For I2C_HID, this requires a larger rework of the Kconfig description,
but it hopefully becomes easier to understand without the complex
I2C_HID_CORE definition.

Fixes: 25621bcc ("HID: Kconfig: split HID support and hid-core compilation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The Makefile was assuming that headers_install was already done in
the top source directory, and was searching for installed uapi headers
there.
Unfortunately this is not the case and we need to manually call that step.

To do so, reorder the declaration of the variables, and reuses top_srcdir
provided by lib.mk
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/all/202212060216.a6X8Py5H-lkp@intel.com/#tSigned-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Jiri Kosina <jkosina@suse.cz>
Link: https://lore.kernel.org/r/20221206145936.922196-6-benjamin.tissoires@redhat.com

DYNAMIC_FTRACE_WITH_DIRECT_CALLS is implicit on x86_64 but is still a
WIP on aarm64. Ensure we get it selected to not have any surprises.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Jiri Kosina <jkosina@suse.cz>
Link: https://lore.kernel.org/r/20221206145936.922196-5-benjamin.tissoires@redhat.com

As mentioned in the link below, having JIT and BPF is not enough to
have fentry/fexit/fmod_ret APIs. This resolves the error that
happens on a system without tracing enabled when hid-bpf tries to
load itself.

Link: https://lore.kernel.org/r/CABRcYmKyRchQhabi1Vd9RcMQFCcb=EtWyEbFDFRTc-L-U8WhgA@mail.gmail.com
Fixes: f5c27da4 ("HID: initial BPF implementation")
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Florent Revest <revest@chromium.org>
Reviewed-by: Jiri Kosina <jkosina@suse.cz>
Link: https://lore.kernel.org/r/20221206145936.922196-4-benjamin.tissoires@redhat.com

Now that we have  aproper non debug API to declare which function is
fmodret, we can rely on it.

Link: https://lore.kernel.org/all/20221121104403.1545f9b5@gandalf.local.home/Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20221206145936.922196-3-benjamin.tissoires@redhat.com

Merge the above branch that we are sharing with the bpf folks.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

The current way of expressing that a non-bpf kernel component is willing
to accept that bpf programs can be attached to it and that they can change
the return value is to abuse ALLOW_ERROR_INJECTION.
This is debated in the link below, and the result is that it is not a
reasonable thing to do.

Reuse the kfunc declaration structure to also tag the kernel functions
we want to be fmodret. This way we can control from any subsystem which
functions are being modified by bpf without touching the verifier.

Link: https://lore.kernel.org/all/20221121104403.1545f9b5@gandalf.local.home/Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20221206145936.922196-2-benjamin.tissoires@redhat.com

There is a spelling mistake in a comment and a usage message. Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

In most configurations, INPUT is actually a boolean: either y or disabled,
but when it's disabled, you can't do much on your average laptop.

But it turns out that there is a possibility to have INPUT as a module:
you have to disable VT and TTY (of course), but also enable EXPERT.
I'll leave how to disable VT and TTY as an exercise for the bravest.

Anyway, if INPUT is m, we can still configure HID as y, which is not
correct because hid-input.c depends on the input API, meaning that
vmlinuz can not link.

So: add depends on INPUT too at the HID level, to ensure that if INPUT=m,
HID can only be m or disabled.

Fixes: 25621bcc ("HID: Kconfig: split HID support and hid-core compilation")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/202211181742.QYJY6Gug-lkp@intel.comSigned-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

If HID_SUPPORT is not selected, BT_HIDP should not be available, simply
because we disallowed the HID bus entirely.

Add a new depends and actually revert this file back to where it was 10
years ago before it was changed by commit 1f41a6a9 ("HID: Fix the
generic Kconfig options").

Fixes: 25621bcc ("HID: Kconfig: split HID support and hid-core compilation")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/202211181514.fLhaiS7o-lkp@intel.com/Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

dispatch_hid_bpf_device_event() is supposed to return either an error,
or a valid pointer to memory containing the data.

Returning NULL simply makes a segfault when CONFIG_HID_BPF is not set
for any processed event.

Fixes: 658ee5a6 ("HID: bpf: allocate data memory for device_event BPF program")
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Gives a primer on HID-BPF.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add a more complete HID-BPF example.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Everything should be available in the selftest part of the tree, but
providing an example without uhid and hidraw will be more easy to
follow for users.

This example will probably ever only work on the Etekcity Scroll 6E
because we need to adapt the various raw values to the actual device.

On that device, the X and Y axis will be swapped and inverted, and on
any other device, chances are high that the device will not work until
Ctrl-C is hit.

The Makefiles are taken from samples/bpf to not reinvent the wheel and
to force using in-kernel libbpf and bpftool.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Insert 3 programs to check that we are doing the correct thing:
'2', '1', '3' are inserted, but '1' is supposed to be executed first.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Simple report descriptor override in HID: replace part of the report
descriptor from a static definition in the bpf kernel program.

Note that this test should be run last because we disconnect/reconnect
the device, meaning that it changes the overall uhid device.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add a new tracepoint hid_bpf_rdesc_fixup() so we can trigger a
report descriptor fixup in the bpf world.

Whenever the program gets attached/detached, the device is reconnected
meaning that userspace will see it disappearing and reappearing with
the new report descriptor.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add tests for the newly implemented function.
We test here only the GET_REPORT part because the other calls are pure
HID protocol and won't infer the result of the test of the bpf hook.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This function can not be called under IRQ, thus it is only available
while in SEC("syscall").
For consistency, this function requires a HID-BPF context to work with,
and so we also provide a helper to create one based on the HID unique
ID.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

--

changes in v12:
- variable dereferenced before check 'ctx'
  |Reported-by: kernel test robot <lkp@intel.com>
  |Reported-by: Dan Carpenter <error27@gmail.com>

no changes in v11

no changes in v10

changes in v9:
- fixed kfunc declaration aaccording to latest upstream changes

no changes in v8

changes in v7:
- hid_bpf_allocate_context: remove unused variable
- ensures buf is not NULL

changes in v6:
- rename parameter size into buf__sz to teach the verifier about
  the actual buffer size used by the call
- remove the allocated data in the user created context, it's not used

new-ish in v5
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Use a different report with a bigger size and ensures we are doing
things properly.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

We need to also be able to change the size of the report.
Reducing it is easy, because we already have the incoming buffer that is
big enough, but extending it is harder.

Pre-allocate a buffer that is big enough to handle all reports of the
device, and use that as the primary buffer for BPF programs.
To be able to change the size of the buffer, we change the device_event
API and request it to return the size of the buffer.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Kind of a hack, but works for now:

Instead of listening for any close of eBPF program, we now
decrement the refcount when we insert it in our internal
map of fd progs.

This is safe to do because:
- we listen to any call of destructor of programs
- when a program is being destroyed, we disable it by removing
  it from any RCU list used by any HID device (so it will never
  be called)
- we then trigger a job to cleanup the prog fd map, but we overwrite
  the removal of the elements to not do anything on the programs, just
  remove the allocated space

This is better than previously because we can remove the map of known
programs and their usage count. We now rely on the refcount of
bpf, which has greater chances of being accurate.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The tests are pretty basic:
- create a virtual uhid device that no userspace will like (to not mess
  up the running system)
- attach a BPF prog to it
- open the matching hidraw node
- inject one event and check:
  * that the BPF program can do something on the event stream
  * can modify the event stream
- add another test where we attach/detach BPF programs to see if we get
  errors

Note: the Makefile is extracted from selftests/bpf so we can rebuild
the libbpf and bpftool components from the current kernel tree without
relying on system installed components.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Declare an entry point that can use fmod_ret BPF programs, and
also an API to access and change the incoming data.

A simpler implementation would consist in just calling
hid_bpf_device_event() for any incoming event and let users deal
with the fact that they will be called for any event of any device.

The goal of HID-BPF is to partially replace drivers, so this situation
can be problematic because we might have programs which will step on
each other toes.

For that, we add a new API hid_bpf_attach_prog() that can be called
from a syscall and we manually deal with a jump table in hid-bpf.

Whenever we add a program to the jump table (in other words, when we
attach a program to a HID device), we keep the number of time we added
this program in the jump table so we can release it whenever there are
no other users.

HID devices have an RCU protected list of available programs in the
jump table, and those programs are called one after the other thanks
to bpf_tail_call().

To achieve the detection of users losing their fds on the programs we
attached, we add 2 tracing facilities on bpf_prog_release() (for when
a fd is closed) and bpf_free_inode() (for when a pinned program gets
unpinned).
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Currently, we step into drivers/hid/ based on the value of
CONFIG_HID.

However, that value is a tristate, meaning that it can be a module.

As per the documentation, if we jump into the subdirectory by
following an obj-m, we can not compile anything inside that
subdirectory in vmlinux. It is considered as a bug.

To make things more friendly to HID-BPF, split HID (the HID core
parameter) from HID_SUPPORT (do we want any kind of HID support in the
system?), and make this new config a boolean.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull HID fixes from Jiri Kosina:

 - fix for memory leak (on error path) in Hyper-V driver (Yang
   Yingliang)

 - regression fix for handling 3rd barrel switch emulation in Wacom
   driver (Jason Gerecke)

* tag 'for-linus-2022111101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: wacom: Fix logic used for 3rd barrel switch emulation
  HID: hyperv: fix possible memory leak in mousevsc_probe()
  HID: asus: Remove unused variable in asus_report_tool_width()

Pull sound fixes from Takashi Iwai:
 "Things look calming down, as this contains only a few small fixes:

   - Fix for a corner-case bug with SG-buffer page allocation helper

   - A regression fix for Roland USB-audio device probe

   - A potential memory leak fix at the error path

   - Handful quirks and device-specific fixes for HD- and USB-audio"

* tag 'sound-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda: fix potential memleak in 'add_widget_node'
  ALSA: memalloc: Don't fall back for SG-buffer with IOMMU
  ALSA: usb-audio: add quirk to fix Hamedal C20 disconnect issue
  ALSA: hda/realtek: Add Positivo C6300 model quirk
  ALSA: usb-audio: Add DSD support for Accuphase DAC-60
  ALSA: usb-audio: Add quirk entry for M-Audio Micro
  ALSA: hda/hdmi - enable runtime pm for more AMD display audio
  ALSA: usb-audio: Remove redundant workaround for Roland quirk
  ALSA: usb-audio: Yet more regression for for the delayed card registration
  ALSA: hda/ca0132: add quirk for EVGA Z390 DARK
  ALSA: hda: clarify comments on SCF changes
  ALSA: arm: pxa: pxa2xx-ac97-lib: fix return value check of platform_get_irq()
  ALSA: hda/realtek: Add quirk for ASUS Zenbook using CS35L41

Pull drm fixes from Dave Airlie:
 "Weekly pull request for graphics, mostly amdgpu and i915, with a
  couple of fixes for vc4 and panfrost, panel quirks and a kconfig
  change for rcar-du. Nothing seems to be too strange at this stage.

  amdgpu:
   - Fix s/r in amdgpu_vram_mgr_new
   - SMU 13.0.4 update
   - GPUVM TLB race fix
   - DCN 3.1.4 fixes
   - DCN 3.2.x fixes
   - Vega10 fan fix
   - BACO fix for Beige Goby board
   - PSR fix
   - GPU VM PT locking fixes

  amdkfd:
   - CRIU fixes

  vc4:
   - HDMI fixes to vc4.

  panfrost:
   - Make panfrost's uapi header compile with C++.
   - Handle 1 gb boundary correctly in panfrost mmu code.

  panel:
   - Add rotation quirks for 2 panels.

  rcar-du:
   - DSI Kconfig fix

  i915:
   - Fix sg_table handling in map_dma_buf
   - Send PSR update also on invalidate
   - Do not set cache_dirty for DGFX
   - Restore userptr probe_range behaviour"

* tag 'drm-fixes-2022-11-11' of git://anongit.freedesktop.org/drm/drm: (29 commits)
  drm/amd/display: only fill dirty rectangles when PSR is enabled
  drm/amdgpu: disable BACO on special BEIGE_GOBY card
  drm/amdgpu: Drop eviction lock when allocating PT BO
  drm/amdgpu: Unlock bo_list_mutex after error handling
  Revert "drm/amdgpu: Revert "drm/amdgpu: getting fan speed pwm for vega10 properly""
  drm/amd/display: Enforce minimum prefetch time for low memclk on DCN32
  drm/amd/display: Fix gpio port mapping issue
  drm/amd/display: Fix reg timeout in enc314_enable_fifo
  drm/amd/display: Fix FCLK deviation and tool compile issues
  drm/amd/display: Zeromem mypipe heap struct before using it
  drm/amd/display: Update SR watermarks for DCN314
  drm/amdgpu: workaround for TLB seq race
  drm/amdkfd: Fix error handling in criu_checkpoint
  drm/amdkfd: Fix error handling in kfd_criu_restore_events
  drm/amd/pm: update SMU IP v13.0.4 msg interface header
  drm: rcar-du: Fix Kconfig dependency between RCAR_DU and RCAR_MIPI_DSI
  drm/panfrost: Split io-pgtable requests properly
  drm/amdgpu: Fix the lpfn checking condition in drm buddy
  drm: panel-orientation-quirks: Add quirk for Acer Switch V 10 (SW5-017)
  drm: panel-orientation-quirks: Add quirk for Nanote UMPC-01
  ...

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter, wifi, can and bpf.

  Current release - new code bugs:

   - can: af_can: can_exit(): add missing dev_remove_pack() of
     canxl_packet

  Previous releases - regressions:

   - bpf, sockmap: fix the sk->sk_forward_alloc warning

   - wifi: mac80211: fix general-protection-fault in
     ieee80211_subif_start_xmit()

   - can: af_can: fix NULL pointer dereference in can_rx_register()

   - can: dev: fix skb drop check, avoid o-o-b access

   - nfnetlink: fix potential dead lock in nfnetlink_rcv_msg()

  Previous releases - always broken:

   - bpf: fix wrong reg type conversion in release_reference()

   - gso: fix panic on frag_list with mixed head alloc types

   - wifi: brcmfmac: fix buffer overflow in brcmf_fweh_event_worker()

   - wifi: mac80211: set TWT Information Frame Disabled bit as 1

   - eth: macsec offload related fixes, make sure to clear the keys from
     memory

   - tun: fix memory leaks in the use of napi_get_frags

   - tun: call napi_schedule_prep() to ensure we own a napi

   - tcp: prohibit TCP_REPAIR_OPTIONS if data was already sent

   - ipv6: addrlabel: fix infoleak when sending struct ifaddrlblmsg to
     network

   - tipc: fix a msg->req tlv length check

   - sctp: clear out_curr if all frag chunks of current msg are pruned,
     avoid list corruption

   - mctp: fix an error handling path in mctp_init(), avoid leaks"

* tag 'net-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits)
  eth: sp7021: drop free_netdev() from spl2sw_init_netdev()
  MAINTAINERS: Move Vivien to CREDITS
  net: macvlan: fix memory leaks of macvlan_common_newlink
  ethernet: tundra: free irq when alloc ring failed in tsi108_open()
  net: mv643xx_eth: disable napi when init rxq or txq failed in mv643xx_eth_open()
  ethernet: s2io: disable napi when start nic failed in s2io_card_up()
  net: atlantic: macsec: clear encryption keys from the stack
  net: phy: mscc: macsec: clear encryption keys when freeing a flow
  stmmac: dwmac-loongson: fix missing of_node_put() while module exiting
  stmmac: dwmac-loongson: fix missing pci_disable_device() in loongson_dwmac_probe()
  stmmac: dwmac-loongson: fix missing pci_disable_msi() while module exiting
  cxgb4vf: shut down the adapter when t4vf_update_port_info() failed in cxgb4vf_open()
  mctp: Fix an error handling path in mctp_init()
  stmmac: intel: Update PCH PTP clock rate from 200MHz to 204.8MHz
  net: cxgb3_main: disable napi when bind qsets failed in cxgb_up()
  net: cpsw: disable napi in cpsw_ndo_open()
  iavf: Fix VF driver counting VLAN 0 filters
  ice: Fix spurious interrupt during removal of trusted VF
  net/mlx5e: TC, Fix slab-out-of-bounds in parse_tc_actions
  net/mlx5e: E-Switch, Fix comparing termination table instance
  ...

Saeed Mahameed says:

====================
mlx5 fixes 2022-11-02

This series provides bug fixes to mlx5 driver.

* tag 'mlx5-fixes-2022-11-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5e: TC, Fix slab-out-of-bounds in parse_tc_actions
  net/mlx5e: E-Switch, Fix comparing termination table instance
  net/mlx5e: TC, Fix wrong rejection of packet-per-second policing
  net/mlx5e: Fix tc acts array not to be dependent on enum order
  net/mlx5e: Fix usage of DMA sync API
  net/mlx5e: Add missing sanity checks for max TX WQE size
  net/mlx5: fw_reset: Don't try to load device in case PCI isn't working
  net/mlx5: E-switch, Set to legacy mode if failed to change switchdev mode
  net/mlx5: Allow async trigger completion execution on single CPU systems
  net/mlx5: Bridge, verify LAG state when adding bond to bridge
====================

Link: https://lore.kernel.org/r/20221109184050.108379-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-11-09 (ice, iavf)

This series contains updates to ice and iavf drivers.

Norbert stops disabling VF queues that are not enabled for ice driver.

Michal stops accounting of VLAN 0 filter to match expectations of PF
driver for iavf.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  iavf: Fix VF driver counting VLAN 0 filters
  ice: Fix spurious interrupt during removal of trusted VF
====================

Link: https://lore.kernel.org/r/20221110003744.201414-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

It's not necessary to free netdev allocated with devm_alloc_etherdev()
and using free_netdev() leads to double free.

Fixes: fd3040b9 ("net: ethernet: Add driver for Sunplus SP7021")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20221109150116.2988194-1-weiyongjun@huaweicloud.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'drm-intel-fixes-2022-11-10' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fix sg_table handling in map_dma_buf (Matthew Auld)
- Send PSR update also on invalidate (Jouni Högander)
- Do not set cache_dirty for DGFX (Niranjana Vishwanathapura)
- Restore userptr probe_range behaviour (Matthew Auld)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y2zCy5q85qE9W0J8@tursulin-desk

R-Car DSI Kconfig dependency fix
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y2u8+uM4A006XRPh@pendragon.ideasonboard.com

Last patch from Vivien was nearly 3 years ago and he has not reviewed or
responded to DSA patches since then, move to CREDITS.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221109231907.621678-1-f.fainelli@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

drm-misc-fixes for v6.1-rc5:
- HDMI fixes to vc4.
- Make panfrost's uapi header compile with C++.
- Add rotation quirks for 2 panels.
- Fix s/r in amdgpu_vram_mgr_new
- Handle 1 gb boundary correctly in panfrost mmu code.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e02de501-4b85-28a0-3f6e-751ca13f5f9d@linux.intel.com

Pull btrfs fixes from David Sterba:

 - revert memory optimization for scrub blocks, this misses errors in
   2nd and following blocks

 - add exception for ENOMEM as reason for transaction abort to not print
   stack trace, syzbot has reported many

 - zoned fixes:
      - fix locking imbalance during scrub
      - initialize zones for seeding device
      - initialize zones for cloned device structures

 - when looking up device, change assertion to a real check as some of
   the search parameters can be passed by ioctl, reported by syzbot

 - fix error pointer check in self tests

* tag 'for-6.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: zoned: fix locking imbalance on scrub
  btrfs: zoned: initialize device's zone info for seeding
  btrfs: zoned: clone zoned device info when cloning a device
  Revert "btrfs: scrub: use larger block size for data extent scrub"
  btrfs: don't print stack trace when transaction is aborted due to ENOMEM
  btrfs: selftests: fix wrong error check in btrfs_free_dummy_root()
  btrfs: fix match incorrectly in dev_args_match_device

Pull soundwire fixes from Vinod Koul:
 "Two qcom driver fixes for broadcast completion reinit and check for
  outanding writes. And a lone Intel driver fix for clock stop timeout"

* tag 'soundwire-6.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: qcom: check for outanding writes before doing a read
  soundwire: qcom: reinit broadcast completion
  soundwire: intel: Initialize clock stop timeout

Pull phy fixes from Vinod Koul:
 "A bunch of odd driver fixes and a MAINTAINER email update:

   - Update Kishon's email

   - stms32 error code fix in driver probe

   - tegra: fix for checking valid pointer

   - qcom_qmp: null deref fix

   - sunplus: error check fix

   - ralink: add missing sentinel to table"

* tag 'phy-fixes-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: ralink: mt7621-pci: add sentinel to quirks table
  phy: sunplus: Fix an IS_ERR() vs NULL bug in sp_usb_phy_probe
  phy: qcom-qmp-combo: fix NULL-deref on runtime resume
  phy: tegra: xusb: Fix crash during pad power on/down
  phy: stm32: fix an error code in probe
  MAINTAINERS: Update Kishon's email address in GENERIC PHY FRAMEWORK

Pull hwspinlock updates from Bjorn Andersson:
 "I apparently had missed tagging and sending this set of changes out
  during the 6.1 merge window. But did get the associated dts changes
  depending on this merged. The result is a regression in 6.1-rc on the
  affected, older, Qualcomm platforms - in for form of them not booting.

  So while these weren't regression fixes originally, they are now. It's
  not introducing new beahavior, but simply extending the existing new
  Devicetree model, to cover remaining platforms:

   - extend the DeviceTree binding and implementation for the Qualcomm
     hardware spinlock on some older platforms to follow the style of
     the newer ones where the DeviceTree representation does not rely on
     an intermediate syscon node"

* tag 'hwlock-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  dt-bindings: hwlock: qcom-hwspinlock: add syscon to MSM8974
  hwspinlock: qcom: add support for MMIO on older SoCs
  hwspinlock: qcom: correct MMIO max register for newer SoCs
  dt-bindings: hwlock: qcom-hwspinlock: correct example indentation
  dt-bindings: hwlock: qcom-hwspinlock: add support for MMIO on older SoCs