- 29 Jul, 2020 24 commits
-
-
Robbie Ko authored
commit 5909ca11 upstream. When locking pages for delalloc, we check if it's dirty and mapping still matches. If it does not match, we need to return -EAGAIN and release all pages. Only the current page was put though, iterate over all the remaining pages too. CC: stable@vger.kernel.org # 4.14+ Reviewed-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
Robbie Ko <robbieko@synology.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Boris Burkov authored
commit 48cfa61b upstream. It is possible to cause a btrfs mount to fail by racing it with a slow umount. The crux of the sequence is generic_shutdown_super not yet calling sop->put_super before btrfs_mount_root calls btrfs_open_devices. If that occurs, btrfs_open_devices will decide the opened counter is non-zero, increment it, and skip resetting fs_devices->total_rw_bytes to 0. From here, mount will call sget which will result in grab_super trying to take the super block umount semaphore. That semaphore will be held by the slow umount, so mount will block. Before up-ing the semaphore, umount will delete the super block, resulting in mount's sget reliably allocating a new one, which causes the mount path to dutifully fill it out, and increment total_rw_bytes a second time, which causes the mount to fail, as we see double the expected bytes. Here is the sequence laid out in greater detail: CPU0 CPU1 down_write sb->s_umount btrfs_kill_super kill_anon_super(sb) generic_shutdown_super(sb); shrink_dcache_for_umount(sb); sync_filesystem(sb); evict_inodes(sb); // SLOW btrfs_mount_root btrfs_scan_one_device fs_devices = device->fs_devices fs_info->fs_devices = fs_devices // fs_devices-opened makes this a no-op btrfs_open_devices(fs_devices, mode, fs_type) s = sget(fs_type, test, set, flags, fs_info); find sb in s_instances grab_super(sb); down_write(&s->s_umount); // blocks sop->put_super(sb) // sb->fs_devices->opened == 2; no-op spin_lock(&sb_lock); hlist_del_init(&sb->s_instances); spin_unlock(&sb_lock); up_write(&sb->s_umount); return 0; retry lookup don't find sb in s_instances (deleted by CPU0) s = alloc_super return s; btrfs_fill_super(s, fs_devices, data) open_ctree // fs_devices total_rw_bytes improperly set! btrfs_read_chunk_tree read_one_dev // increment total_rw_bytes again!! super_total_bytes < fs_devices->total_rw_bytes // ERROR!!! To fix this, we clear total_rw_bytes from within btrfs_read_chunk_tree before the calls to read_one_dev, while holding the sb umount semaphore and the uuid mutex. To reproduce, it is sufficient to dirty a decent number of inodes, then quickly umount and mount. for i in $(seq 0 500) do dd if=/dev/zero of="/mnt/foo/$i" bs=1M count=1 done umount /mnt/foo& mount /mnt/foo does the trick for me. CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Boris Burkov <boris@bur.io> Reviewed-by:
-
Filipe Manana authored
commit 580c079b upstream. At btrfs_find_all_roots_safe() we allocate a ulist and set the **roots argument to point to it. However if later we fail due to an error returned by find_parent_nodes(), we free that ulist but leave a dangling pointer in the **roots argument. Upon receiving the error, a caller of this function can attempt to free the same ulist again, resulting in an invalid memory access. One such scenario is during qgroup accounting: btrfs_qgroup_account_extents() --> calls btrfs_find_all_roots() passes &new_roots (a stack allocated pointer) to btrfs_find_all_roots() --> btrfs_find_all_roots() just calls btrfs_find_all_roots_safe() passing &new_roots to it --> allocates ulist and assigns its address to **roots (which points to new_roots from btrfs_qgroup_account_extents()) --> find_parent_nodes() returns an error, so we free the ulist and leave **roots pointing to it after returning --> btrfs_qgroup_account_extents() sees btrfs_find_all_roots() returned an error and jumps to the label 'cleanup', which just tries to free again the same ulist Stack trace example: ------------[ cut here ]------------ BTRFS: tree first key check failed WARNING: CPU: 1 PID: 1763215 at fs/btrfs/disk-io.c:422 btrfs_verify_level_key+0xe0/0x180 [btrfs] Modules linked in: dm_snapshot dm_thin_pool (...) CPU: 1 PID: 1763215 Comm: fsstress Tainted: G W 5.8.0-rc3-btrfs-next-64 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:btrfs_verify_level_key+0xe0/0x180 [btrfs] Code: 28 5b 5d (...) RSP: 0018:ffffb89b473779a0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff90397759bf08 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000027 RDI: 00000000ffffffff RBP: ffff9039a419c000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: ffffb89b43301000 R12: 000000000000005e R13: ffffb89b47377a2e R14: ffffb89b473779af R15: 0000000000000000 FS: 00007fc47e1e1000(0000) GS:ffff9039ac200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc47e1df000 CR3: 00000003d9e4e001 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: read_block_for_search+0xf6/0x350 [btrfs] btrfs_next_old_leaf+0x242/0x650 [btrfs] resolve_indirect_refs+0x7cf/0x9e0 [btrfs] find_parent_nodes+0x4ea/0x12c0 [btrfs] btrfs_find_all_roots_safe+0xbf/0x130 [btrfs] btrfs_qgroup_account_extents+0x9d/0x390 [btrfs] btrfs_commit_transaction+0x4f7/0xb20 [btrfs] btrfs_sync_file+0x3d4/0x4d0 [btrfs] do_fsync+0x38/0x70 __x64_sys_fdatasync+0x13/0x20 do_syscall_64+0x5c/0xe0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fc47e2d72e3 Code: Bad RIP value. RSP: 002b:00007fffa32098c8 EFLAGS: 00000246 ORIG_RAX: 000000000000004b RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc47e2d72e3 RDX: 00007fffa3209830 RSI: 00007fffa3209830 RDI: 0000000000000003 RBP: 000000000000072e R08: 0000000000000001 R09: 0000000000000003 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000000003e8 R13: 0000000051eb851f R14: 00007fffa3209970 R15: 00005607c4ac8b50 irq event stamp: 0 hardirqs last enabled at (0): [<0000000000000000>] 0x0 hardirqs last disabled at (0): [<ffffffffb8eb5e85>] copy_process+0x755/0x1eb0 softirqs last enabled at (0): [<ffffffffb8eb5e85>] copy_process+0x755/0x1eb0 softirqs last disabled at (0): [<0000000000000000>] 0x0 ---[ end trace 8639237550317b48 ]--- BTRFS error (device sdc): tree first key mismatch detected, bytenr=62324736 parent_transid=94 key expected=(262,108,1351680) has=(259,108,1921024) general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI CPU: 2 PID: 1763215 Comm: fsstress Tainted: G W 5.8.0-rc3-btrfs-next-64 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:ulist_release+0x14/0x60 [btrfs] Code: c7 07 00 (...) RSP: 0018:ffffb89b47377d60 EFLAGS: 00010282 RAX: 6b6b6b6b6b6b6b6b RBX: ffff903959b56b90 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000270024 RDI: ffff9036e2adc840 RBP: ffff9036e2adc848 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9036e2adc840 R13: 0000000000000015 R14: ffff9039a419ccf8 R15: ffff90395d605840 FS: 00007fc47e1e1000(0000) GS:ffff9039ac600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8c1c0a51c8 CR3: 00000003d9e4e004 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ulist_free+0x13/0x20 [btrfs] btrfs_qgroup_account_extents+0xf3/0x390 [btrfs] btrfs_commit_transaction+0x4f7/0xb20 [btrfs] btrfs_sync_file+0x3d4/0x4d0 [btrfs] do_fsync+0x38/0x70 __x64_sys_fdatasync+0x13/0x20 do_syscall_64+0x5c/0xe0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fc47e2d72e3 Code: Bad RIP value. RSP: 002b:00007fffa32098c8 EFLAGS: 00000246 ORIG_RAX: 000000000000004b RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc47e2d72e3 RDX: 00007fffa3209830 RSI: 00007fffa3209830 RDI: 0000000000000003 RBP: 000000000000072e R08: 0000000000000001 R09: 0000000000000003 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000000003e8 R13: 0000000051eb851f R14: 00007fffa3209970 R15: 00005607c4ac8b50 Modules linked in: dm_snapshot dm_thin_pool (...) ---[ end trace 8639237550317b49 ]--- RIP: 0010:ulist_release+0x14/0x60 [btrfs] Code: c7 07 00 (...) RSP: 0018:ffffb89b47377d60 EFLAGS: 00010282 RAX: 6b6b6b6b6b6b6b6b RBX: ffff903959b56b90 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000270024 RDI: ffff9036e2adc840 RBP: ffff9036e2adc848 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9036e2adc840 R13: 0000000000000015 R14: ffff9039a419ccf8 R15: ffff90395d605840 FS: 00007fc47e1e1000(0000) GS:ffff9039ad200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6a776f7d40 CR3: 00000003d9e4e002 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fix this by making btrfs_find_all_roots_safe() set *roots to NULL after it frees the ulist. Fixes: 8da6d581 ("Btrfs: added btrfs_find_all_roots()") CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
-
Hans de Goede authored
commit 5cacc6f5 upstream. The RT5670_PWR_ANLG1 register has 3 bits to select the LDO voltage, so the correct mask is 0x7 not 0x3. Because of this wrong mask we were programming the ldo bits to a setting of binary 001 (0x05 & 0x03) instead of binary 101 when moving to SND_SOC_BIAS_PREPARE. According to the datasheet 001 is a reserved value, so no idea what it did, since the driver was working fine before I guess we got lucky and it does something which is ok. Fixes: 5e8351de ("ASoC: add RT5670 CODEC driver") Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200628155231.71089-3-hdegoede@redhat.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit 60379ba0 upstream. snd_info_get_line() has a sanity check of NULL buffer -- both buffer itself being NULL and buffer->buffer being NULL. Basically both checks are valid and necessary, but the problem is that it's with snd_BUG_ON() macro that triggers WARN_ON(). The latter condition (NULL buffer->buffer) can be met arbitrarily by user since the buffer is allocated at the first write, so it means that user can trigger WARN_ON() at will. This patch addresses it by simply moving buffer->buffer NULL check out of snd_BUG_ON() so that spurious WARNING is no longer triggered. Reported-by: syzbot+e42d0746c3c3699b6061@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200717084023.5928-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Oleg Nesterov authored
commit fe5ed7ab upstream. If a tracee is uprobed and it hits int3 inserted by debugger, handle_swbp() does send_sig(SIGTRAP, current, 0) which means si_code == SI_USER. This used to work when this code was written, but then GDB started to validate si_code and now it simply can't use breakpoints if the tracee has an active uprobe: # cat test.c void unused_func(void) { } int main(void) { return 0; } # gcc -g test.c -o test # perf probe -x ./test -a unused_func # perf record -e probe_test:unused_func gdb ./test -ex run GNU gdb (GDB) 10.0.50.20200714-git ... Program received signal SIGTRAP, Trace/breakpoint trap. 0x00007ffff7ddf909 in dl_main () from /lib64/ld-linux-x86-64.so.2 (gdb) The tracee hits the internal breakpoint inserted by GDB to monitor shared library events but GDB misinterprets this SIGTRAP and reports a signal. Change handle_swbp() to use force_sig(SIGTRAP), this matches do_int3_user() and fixes the problem. This is the minimal fix for -stable, arch/x86/kernel/uprobes.c is equally wrong; it should use send_sigtrap(TRAP_TRACE) instead of send_sig(SIGTRAP), but this doesn't confuse GDB and needs another x86-specific patch. Reported-by:
Aaron Merey <amerey@redhat.com> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Reviewed-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200723154420.GA32043@redhat.comSigned-off-by:
-
Yang Yingliang authored
Add missing mmput() on error path to avoid ref-count leak. This problem is introduced by 79bb5b7e ("RDMA/umem: Fix missing mmap_sem in get umem ODP call") and resolved by f27a0d50 ("RDMA/umem: Use umem->owning_mm inside ODP"). So, it's only needed in stable-4.14 and stable-4.19. Fixes: 79bb5b7e ("RDMA/umem: Fix missing mmap_sem in get umem ODP call") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
Jon Maloy authored
commit e654f9f5 upstream. The policy for handling the skb list locks on the send and receive paths is simple. - On the send path we never need to grab the lock on the 'xmitq' list when the destination is an exernal node. - On the receive path we always need to grab the lock on the 'inputq' list, irrespective of source node. However, when transmitting node local messages those will eventually end up on the receive path of a local socket, meaning that the argument 'xmitq' in tipc_node_xmit() will become the 'ínputq' argument in the function tipc_sk_rcv(). This has been handled by always initializing the spinlock of the 'xmitq' list at message creation, just in case it may end up on the receive path later, and despite knowing that the lock in most cases never will be used. This approach is inaccurate and confusing, and has also concealed the fact that the stated 'no lock grabbing' policy for the send path is violated in some cases. We now clean up this by never initializing the lock at message creation, instead doing this at the moment we find that the message actually will enter the receive path. At the same time we fix the four locations where we incorrectly access the spinlock on the send/error path. This patch also reverts commit d12cffe9 ("tipc: ensure head->lock is initialised") which has now become redundant. CC: Eric Dumazet <edumazet@google.com> Reported-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Reviewed-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> [acj: backport v4.19 -stable - adjust context - skipped the hunk modifying non-existent function tipc_mcast_send_sync - additional comment ] Signed-off-by:
Aviraj CJ <acj@cisco.com> Signed-off-by:
-
Vladimir Oltean authored
commit d41f36a6 upstream. The DSPI interrupt can be shared between two controllers at least on the LX2160A. In that case, the driver for one controller might misbehave and consume the other's interrupt. Fix this by actually checking if any of the bits in the status register have been asserted. Fixes: 13aed239 ("spi: spi-fsl-dspi: use IRQF_SHARED mode to request IRQ") Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20190822212450.21420-2-olteanv@gmail.comSigned-off-by:
-
Olga Kornievskaia authored
commit 65caafd0 upstream. Reverting commit d03727b2 "NFSv4 fix CLOSE not waiting for direct IO compeletion". This patch made it so that fput() by calling inode_dio_done() in nfs_file_release() would wait uninterruptably for any outstanding directIO to the file (but that wait on IO should be killable). The problem the patch was also trying to address was REMOVE returning ERR_ACCESS because the file is still opened, is supposed to be resolved by server returning ERR_FILE_OPEN and not ERR_ACCESS. Signed-off-by:
Olga Kornievskaia <kolga@netapp.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Thomas Gleixner authored
[ Upstream commit e3beca48 ] Quite some non OF/ACPI users of irqdomains allocate firmware nodes of type IRQCHIP_FWNODE_NAMED or IRQCHIP_FWNODE_NAMED_ID and free them right after creating the irqdomain. The only purpose of these FW nodes is to convey name information. When this was introduced the core code did not store the pointer to the node in the irqdomain. A recent change stored the firmware node pointer in irqdomain for other reasons and missed to notice that the usage sites which do the alloc_fwnode/create_domain/free_fwnode sequence are broken by this. Storing a dangling pointer is dangerous itself, but in case that the domain is destroyed later on this leads to a double free. Remove the freeing of the firmware node after creating the irqdomain from all affected call sites to cure this. Fixes: 711419e5 ("irqdomain: Add the missing assignment of domain->fwnode for named fwnode") Reported-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/873661qakd.fsf@nanos.tec.linutronix.deSigned-off-by:
Sasha Levin <sashal@kernel.org>
-
Miklos Szeredi authored
commit a5005c3c upstream. When PageWaiters was added, updating this check was missed. Reported-by:
Nikolaus Rath <Nikolaus@rath.org> Reported-by:
Hugh Dickins <hughd@google.com> Fixes: 62906027 ("mm: add PageWaiters indicating tasks are waiting for a page bit") Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
André Almeida <andrealmeid@collabora.com> Signed-off-by:
-
Gavin Shan authored
[ Upstream commit c377e67c ] The CPU mask (@tmp) should be released on failing to allocate @cpu_groups or any of its elements. Otherwise, it leads to memory leakage because the CPU mask variable is dynamically allocated when CONFIG_CPUMASK_OFFSTACK is enabled. Signed-off-by:
Gavin Shan <gshan@redhat.com> Reviewed-by:
Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20200630075227.199624-1-gshan@redhat.comSigned-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
Ben Skeggs authored
[ Upstream commit 0156e76d ] Tegra TRM says worst-case reply time is 1216us, and this should fix some spurious timeouts that have been popping up. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Tom Rix authored
[ Upstream commit 28b18e4e ] clang static analysis flags this garbage return drivers/net/ethernet/marvell/sky2.c:208:2: warning: Undefined or garbage value returned to caller [core.uninitialized.UndefReturn] return v; ^~~~~~~~ static inline u16 gm_phy_read( ... { u16 v; __gm_phy_read(hw, port, reg, &v); return v; } __gm_phy_read can return without setting v. So handle similar to skge.c's gm_phy_read, initialize v. Signed-off-by:
Tom Rix <trix@redhat.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Xie He authored
[ Upstream commit 9dc829a1 ] When this driver transmits data, first this driver will remove a pseudo header of 1 byte, then the lapb module will prepend the LAPB header of 2 or 3 bytes, then this driver will prepend a length field of 2 bytes, then the underlying Ethernet device will prepend its own header. So, the header length required should be: -1 + 3 + 2 + "the header length needed by the underlying device". This patch fixes kernel panic when this driver is used with AF_PACKET SOCK_DGRAM sockets. Signed-off-by:
Xie He <xie.he.0141@gmail.com> Signed-off-by:
-
Max Filippov authored
[ Upstream commit 0d5ab144 ] Increment *pos in the cpuinfo_op.next to fix the following warning triggered by cat /proc/cpuinfo: seq_file: buggy .next function c_next did not update position index Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Max Filippov authored
[ Upstream commit 73f99413 ] Building xtensa kernel with gcc-10 produces the following warnings: arch/xtensa/kernel/xtensa_ksyms.c:90:15: warning: conflicting types for built-in function ‘__sync_fetch_and_and_4’; expected ‘unsigned int(volatile void *, unsigned int)’ [-Wbuiltin-declaration-mismatch] arch/xtensa/kernel/xtensa_ksyms.c:96:15: warning: conflicting types for built-in function ‘__sync_fetch_and_or_4’; expected ‘unsigned int(volatile void *, unsigned int)’ [-Wbuiltin-declaration-mismatch] Fix declarations of these functions to avoid the warning. Signed-off-by:
-
Tom Rix authored
[ Upstream commit 5aee52c4 ] clang static analysis flags several null function pointer problems. drivers/scsi/scsi_transport_spi.c:374:1: warning: Called function pointer is null (null dereference) [core.CallAndMessage] spi_transport_max_attr(offset, "%d\n"); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Reviewing the store_spi_store_max macro if (i->f->set_##field) return -EINVAL; should be if (!i->f->set_##field) return -EINVAL; Link: https://lore.kernel.org/r/20200627133242.21618-1-trix@redhat.comReviewed-by:
James Bottomley <jejb@linux.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Markus Theil authored
[ Upstream commit 0b467b63 ] Without this patch, eapol frames cannot be received in mesh mode, when 802.1X should be used. Initially only a MGTK is defined, which is found and set as rx->key, when there are no other keys set. ieee80211_drop_unencrypted would then drop these eapol frames, as they are data frames without encryption and there exists some rx->key. Fix this by differentiating between mesh eapol frames and other data frames with existing rx->key. Allow mesh mesh eapol frames only if they are for our vif address. With this patch in-place, ieee80211_rx_h_mesh_fwding continues after the ieee80211_drop_unencrypted check and notices, that these eapol frames have to be delivered locally, as they should. Signed-off-by:
Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20200625104214.50319-1-markus.theil@tu-ilmenau.de [small code cleanups] Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Jacky Hu authored
[ Upstream commit 69339d08 ] uart0_pins is defined as: static const unsigned uart0_pins[] = {135, 136, 137, 138, 139}; which npins is wronly specified as 9 later { .name = "uart0", .pins = uart0_pins, .npins = 9, }, npins should be 5 instead of 9 according to the definition. Signed-off-by:
Jacky Hu <hengqing.hu@gmail.com> Link: https://lore.kernel.org/r/20200616015024.287683-1-hengqing.hu@gmail.comSigned-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Navid Emamdoost authored
[ Upstream commit 861254d8 ] Calling pm_runtime_get_sync increments the counter even in case of failure, causing incorrect ref count if pm_runtime_put is not called in error handling paths. Call pm_runtime_put if pm_runtime_get_sync fails. Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200605030052.78235-1-navid.emamdoost@gmail.comSigned-off-by:
-
Navid Emamdoost authored
[ Upstream commit e6f390a8 ] Calling pm_runtime_get_sync increments the counter even in case of failure, causing incorrect ref count. Call pm_runtime_put if pm_runtime_get_sync fails. Signed-off-by:
-
Douglas Anderson authored
commit 35bb4b22 upstream. Adding an item into the cache should never be able to make the cache cleaner. Use "|=" rather than "=" to update the dirty flag. Reviewed-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Maulik Shah <mkshah@codeaurora.org> Thanks, Maulik Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Fixes: bb700067 ("soc: qcom: rpmh: Update dirty flag only when data changes") Reported-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200417141531.1.Ia4b74158497213eabad7c3d474c50bfccb3f342e@changeidSigned-off-by:
-
- 22 Jul, 2020 16 commits
-
-
Greg Kroah-Hartman authored
-
Lingling Xu authored
commit 8bdd79da upstream. The watchdog counter consists of WDG_LOAD_LOW and WDG_LOAD_HIGH, which would be loaded to watchdog counter once writing WDG_LOAD_LOW. Fixes: ac177501 ("spi: sprd: Add the support of restarting the system") Signed-off-by:
Lingling Xu <ling_ling.xu@unisoc.com> Signed-off-by:
Chunyan Zhang <chunyan.zhang@unisoc.com> Link: https://lore.kernel.org/r/20200602082415.5848-1-zhang.lyra@gmail.comSigned-off-by:
-
David Howells authored
commit aadf9dce upstream. The trace symbol printer (__print_symbolic()) ignores symbols that map to an empty string and prints the hex value instead. Fix the symbol for rxrpc_cong_no_change to " -" instead of "" to avoid this. Fixes: b54a134a ("rxrpc: Fix handling of enums-to-string translation in tracing") Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Ilya Dryomov authored
commit 2f3fead6 upstream. Currently target_copy() is used only for sending linger pings, so this doesn't come up, but generally omitting recovery_deletes can result in unneeded resends (force_resend in calc_target()). Fixes: ae78dd81 ("libceph: make RECOVERY_DELETES feature create a new interval") Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
-
Sergey Senozhatsky authored
commit ab6f762f upstream. printk_deferred(), similarly to printk_safe/printk_nmi, does not immediately attempt to print a new message on the consoles, avoiding calls into non-reentrant kernel paths, e.g. scheduler or timekeeping, which potentially can deadlock the system. Those printk() flavors, instead, rely on per-CPU flush irq_work to print messages from safer contexts. For same reasons (recursive scheduler or timekeeping calls) printk() uses per-CPU irq_work in order to wake up user space syslog/kmsg readers. However, only printk_safe/printk_nmi do make sure that per-CPU areas have been initialised and that it's safe to modify per-CPU irq_work. This means that, for instance, should printk_deferred() be invoked "too early", that is before per-CPU areas are initialised, printk_deferred() will perform illegal per-CPU access. Lech Perczak [0] reports that after commit 1b710b1b ("char/random: silence a lockdep splat with printk()") user-space syslog/kmsg readers are not able to read new kernel messages. The reason is printk_deferred() being called too early (as was pointed out by Petr and John). Fix printk_deferred() and do not queue per-CPU irq_work before per-CPU areas are initialized. Link: https://lore.kernel.org/lkml/aa0732c6-5c4e-8a8b-a1c1-75ebe3dca05b@camlintechnologies.com/Reported-by:
Lech Perczak <l.perczak@camlintechnologies.com> Signed-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Tested-by:
Jann Horn <jannh@google.com> Reviewed-by:
Petr Mladek <pmladek@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Theodore Ts'o <tytso@mit.edu> Cc: John Ogness <john.ogness@linutronix.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Thomas Gleixner authored
commit baedb87d upstream. Setting interrupt affinity on inactive interrupts is inconsistent when hierarchical irq domains are enabled. The core code should just store the affinity and not call into the irq chip driver for inactive interrupts because the chip drivers may not be in a state to handle such requests. X86 has a hacky workaround for that but all other irq chips have not which causes problems e.g. on GIC V3 ITS. Instead of adding more ugly hacks all over the place, solve the problem in the core code. If the affinity is set on an inactive interrupt then: - Store it in the irq descriptors affinity mask - Update the effective affinity to reflect that so user space has a consistent view - Don't call into the irq chip driver This is the core equivalent of the X86 workaround and works correctly because the affinity setting is established in the irq chip when the interrupt is activated later on. Note, that this is only effective when hierarchical irq domains are enabled by the architecture. Doing it unconditionally would break legacy irq chip implementations. For hierarchial irq domains this works correctly as none of the drivers can have a dependency on affinity setting in inactive state by design. Remove the X86 workaround as it is not longer required. Fixes: 02edee15 ("x86/apic/vector: Ignore set_affinity call for inactive interrupts") Reported-by:
Ali Saidi <alisaidi@amazon.com> Signed-off-by:
-
Vincent Guittot authored
commit 01cfcde9 upstream. task_h_load() can return 0 in some situations like running stress-ng mmapfork, which forks thousands of threads, in a sched group on a 224 cores system. The load balance doesn't handle this correctly because env->imbalance never decreases and it will stop pulling tasks only after reaching loop_max, which can be equal to the number of running tasks of the cfs. Make sure that imbalance will be decreased by at least 1. misfit task is the other feature that doesn't handle correctly such situation although it's probably more difficult to face the problem because of the smaller number of CPUs and running tasks on heterogenous system. We can't simply ensure that task_h_load() returns at least one because it would imply to handle underflow in other places. Signed-off-by:
Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Valentin Schneider <valentin.schneider@arm.com> Reviewed-by:
Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by:
-
Mathieu Desnoyers authored
commit ce3614da upstream. While integrating rseq into glibc and replacing glibc's sched_getcpu implementation with rseq, glibc's tests discovered an issue with incorrect __rseq_abi.cpu_id field value right after the first time a newly created process issues sched_setaffinity. For the records, it triggers after building glibc and running tests, and then issuing: for x in {1..2000} ; do posix/tst-affinity-static & done and shows up as: error: Unexpected CPU 2, expected 0 error: Unexpected CPU 2, expected 0 error: Unexpected CPU 2, expected 0 error: Unexpected CPU 2, expected 0 error: Unexpected CPU 138, expected 0 error: Unexpected CPU 138, expected 0 error: Unexpected CPU 138, expected 0 error: Unexpected CPU 138, expected 0 This is caused by the scheduler invoking __set_task_cpu() directly from sched_fork() and wake_up_new_task(), thus bypassing rseq_migrate() which is done by set_task_cpu(). Add the missing rseq_migrate() to both functions. The only other direct use of __set_task_cpu() is done by init_idle(), which does not involve a user-space task. Based on my testing with the glibc test-case, just adding rseq_migrate() to wake_up_new_task() is sufficient to fix the observed issue. Also add it to sched_fork() to keep things consistent. The reason why this never triggered so far with the rseq/basic_test selftest is unclear. The current use of sched_getcpu(3) does not typically require it to be always accurate. However, use of the __rseq_abi.cpu_id field within rseq critical sections requires it to be accurate. If it is not accurate, it can cause corruption in the per-cpu data targeted by rseq critical sections in user-space. Reported-By:
Florian Weimer <fweimer@redhat.com> Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
-
Will Deacon authored
commit 15956689 upstream. Although we zero the upper bits of x0 on entry to the kernel from an AArch32 task, we do not clear them on the exception return path and can therefore expose 64-bit sign extended syscall return values to userspace via interfaces such as the 'perf_regs' ABI, which deal exclusively with 64-bit registers. Explicitly clear the upper 32 bits of x0 on return from a compat system call. Cc: <stable@vger.kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Keno Fischer <keno@juliacomputing.com> Cc: Luis Machado <luis.machado@linaro.org> Signed-off-by:
-
Will Deacon authored
commit ac2081cd upstream. Although the arm64 single-step state machine can be fast-forwarded in cases where we wish to generate a SIGTRAP without actually executing an instruction, this has two major limitations outside of simply skipping an instruction due to emulation. 1. Stepping out of a ptrace signal stop into a signal handler where SIGTRAP is blocked. Fast-forwarding the stepping state machine in this case will result in a forced SIGTRAP, with the handler reset to SIG_DFL. 2. The hardware implicitly fast-forwards the state machine when executing an SVC instruction for issuing a system call. This can interact badly with subsequent ptrace stops signalled during the execution of the system call (e.g. SYSCALL_EXIT or seccomp traps), as they may corrupt the stepping state by updating the PSTATE for the tracee. Resolve both of these issues by injecting a pseudo-singlestep exception on entry to a signal handler and also on return to userspace following a system call. Cc: <stable@vger.kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Tested-by:
Luis Machado <luis.machado@linaro.org> Reported-by:
Keno Fischer <keno@juliacomputing.com> Signed-off-by:
-
Will Deacon authored
commit 3a5a4366 upstream. Luis reports that, when reverse debugging with GDB, single-step does not function as expected on arm64: | I've noticed, under very specific conditions, that a PTRACE_SINGLESTEP | request by GDB won't execute the underlying instruction. As a consequence, | the PC doesn't move, but we return a SIGTRAP just like we would for a | regular successful PTRACE_SINGLESTEP request. The underlying problem is that when the CPU register state is restored as part of a reverse step, the SPSR.SS bit is cleared and so the hardware single-step state can transition to the "active-pending" state, causing an unexpected step exception to be taken immediately if a step operation is attempted. In hindsight, we probably shouldn't have exposed SPSR.SS in the pstate accessible by the GPR regset, but it's a bit late for that now. Instead, simply prevent userspace from configuring the bit to a value which is inconsistent with the TIF_SINGLESTEP state for the task being traced. Cc: <stable@vger.kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Keno Fischer <keno@juliacomputing.com> Link: https://lore.kernel.org/r/1eed6d69-d53d-9657-1fc9-c089be07f98c@linaro.orgReported-by:
-
Finley Xiao authored
commit 371a3bc7 upstream. The function cpu_power_to_freq is used to find a frequency and set the cooling device to consume at most the power to be converted. For example, if the power to be converted is 80mW, and the em table is as follow. struct em_cap_state table[] = { /* KHz mW */ { 1008000, 36, 0 }, { 1200000, 49, 0 }, { 1296000, 59, 0 }, { 1416000, 72, 0 }, { 1512000, 86, 0 }, }; The target frequency should be 1416000KHz, not 1512000KHz. Fixes: 349d39dc ("thermal: cpu_cooling: merge frequency and power tables") Cc: <stable@vger.kernel.org> # v4.13+ Signed-off-by:
Finley Xiao <finley.xiao@rock-chips.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by:
Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200619090825.32747-1-finley.xiao@rock-chips.comSigned-off-by:
-
Michał Mirosław authored
commit b037d60a upstream. Uninterruptible context is not needed in the driver and causes lockdep warning because of mutex taken in of_alias_get_id(). Convert the lock to mutex to avoid the issue. Cc: stable@vger.kernel.org Fixes: 099343c6 ("ARM: at91: atmel-ssc: add device tree support") Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/50f0d7fa107f318296afb49477c3571e4d6978c5.1592998403.git.mirq-linux@rere.qmqm.plSigned-off-by:
-
Krzysztof Kozlowski authored
commit f5e5677c upstream. NULL pointer exception happens occasionally on serial output initiated by login timeout. This was reproduced only if kernel was built with significant debugging options and EDMA driver is used with serial console. col-vf50 login: root Password: Login timed out after 60 seconds. Unable to handle kernel NULL pointer dereference at virtual address 00000044 Internal error: Oops: 5 [#1] ARM CPU: 0 PID: 157 Comm: login Not tainted 5.7.0-next-20200610-dirty #4 Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) (fsl_edma_tx_handler) from [<8016eb10>] (__handle_irq_event_percpu+0x64/0x304) (__handle_irq_event_percpu) from [<8016eddc>] (handle_irq_event_percpu+0x2c/0x7c) (handle_irq_event_percpu) from [<8016ee64>] (handle_irq_event+0x38/0x5c) (handle_irq_event) from [<801729e4>] (handle_fasteoi_irq+0xa4/0x160) (handle_fasteoi_irq) from [<8016ddcc>] (generic_handle_irq+0x34/0x44) (generic_handle_irq) from [<8016e40c>] (__handle_domain_irq+0x54/0xa8) (__handle_domain_irq) from [<80508bc8>] (gic_handle_irq+0x4c/0x80) (gic_handle_irq) from [<80100af0>] (__irq_svc+0x70/0x98) Exception stack(0x8459fe80 to 0x8459fec8) fe80: 72286b00 e3359f64 00000001 0000412d a0070013 85c98840 85c98840 a0070013 fea0: 8054e0d4 00000000 00000002 00000000 00000002 8459fed0 8081fbe8 8081fbec fec0: 60070013 ffffffff (__irq_svc) from [<8081fbec>] (_raw_spin_unlock_irqrestore+0x30/0x58) (_raw_spin_unlock_irqrestore) from [<8056cb48>] (uart_flush_buffer+0x88/0xf8) (uart_flush_buffer) from [<80554e60>] (tty_ldisc_hangup+0x38/0x1ac) (tty_ldisc_hangup) from [<8054c7f4>] (__tty_hangup+0x158/0x2bc) (__tty_hangup) from [<80557b90>] (disassociate_ctty.part.1+0x30/0x23c) (disassociate_ctty.part.1) from [<8011fc18>] (do_exit+0x580/0xba0) (do_exit) from [<801214f8>] (do_group_exit+0x3c/0xb4) (do_group_exit) from [<80121580>] (__wake_up_parent+0x0/0x14) Issue looks like race condition between interrupt handler fsl_edma_tx_handler() (called as result of fsl_edma_xfer_desc()) and terminating the transfer with fsl_edma_terminate_all(). The fsl_edma_tx_handler() handles interrupt for a transfer with already freed edesc and idle==true. Fixes: d6be34fb ("dma: Add Freescale eDMA engine driver support") Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by:
Robin Gong <yibin.gong@nxp.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1591877861-28156-2-git-send-email-krzk@kernel.orgSigned-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Alexander Shishkin authored
commit e78e1fdb upstream. Connecting master to an output port when GTH driver module is not loaded triggers a NULL dereference: > RIP: 0010:intel_th_set_output+0x35/0x70 [intel_th] > Call Trace: > ? sth_stm_link+0x12/0x20 [intel_th_sth] > stm_source_link_store+0x164/0x270 [stm_core] > dev_attr_store+0x17/0x30 > sysfs_kf_write+0x3e/0x50 > kernfs_fop_write+0xda/0x1b0 > __vfs_write+0x1b/0x40 > vfs_write+0xb9/0x1a0 > ksys_write+0x67/0xe0 > __x64_sys_write+0x1a/0x20 > do_syscall_64+0x57/0x1d0 > entry_SYSCALL_64_after_hwframe+0x44/0xa9 Make sure the module in question is loaded and return an error if not. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: 39f40346 ("intel_th: Add driver infrastructure for Intel(R) Trace Hub devices") Reviewed-by:
Ammy Yi <ammy.yi@intel.com> Tested-by:
-
Alexander Shishkin authored
commit fd73d74a upstream. This adds support for the Trace Hub in Emmitsburg PCH. Signed-off-by:
-
