s/max_baseliune/max_baseline/
Signed-off-by: Nikolai Kostrigin <nickel@altlinux.org>
Link: https://lore.kernel.org/r/20210311114146.1977616-1-nickel@altlinux.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable because of requesting.

On the other hand, request_irq() after setting IRQ_NOAUTOEN as
below
irq_set_status_flags(irq, IRQ_NOAUTOEN);
request_irq(dev, irq...);
can also be replaced by request_irq() with IRQF_NO_AUTOEN flag.
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Link: https://lore.kernel.org/r/20210302224916.13980-3-song.bao.hua@hisilicon.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge tag 'irq-no-autoen-2021-03-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next

Sync up with the tip tree to pick up IRQF_NO_AUTOEN.

Sync up with the mainline to bring in newest APIs.

The first thing the Cypress driver does when starting
up is to try a soft reset. This is the first point where
the driver SPI/I2C communication can fail, so put out some
nice debug text:

  cyttsp-spi spi2.0: failed to send soft reset

Instead of just:

  cyttsp-spi: probe of spi2.0 failed with error -5

This is more helpful.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210322221349.1116666-1-linus.walleij@linaro.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This patch converts the legacy text-based binding document to YAML
format. Extraneous details and touchscreen properties that weren't
actually supported have been dropped.

The reset GPIO has since been made optional in the driver; this is
now reflected here as well.
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210323021006.367-2-jeff@labundy.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The device's hardware reset pin is only required if the platform
must be able to update the device's firmware.

As such, demote the reset GPIO to optional in support of devices
that ship with pre-programmed firmware and don't route the reset
pin back to the SoC.

In that case, the 'fw_file' attribute is hidden because there is
no way to open the bootloader. The logic is extended to the case
in which the device does not advertise bootloader support in the
first place.

Last but not least, remove the hardware reset performed at probe
because there is no reason to reset the device manually. A power
on reset function already ensures a clean reset at start-up.
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20210323021006.367-1-jeff@labundy.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This patch adds support for the Azoteq IQS626A capacitive touch
controller.
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20210301234928.4298-5-jeff@labundy.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This patch adds device tree bindings for the Azoteq IQS626A
capacitive touch controller.
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210301234928.4298-4-jeff@labundy.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Now that the helper functions have been moved to drivers/input/ so
that all input devices may use them, the introductory comments can
be updated to remove any implication that the helper functions are
solely limited to touchscreens.

This patch also scrubs any remaining use of 'DT' since there isn't
any actual dependency on OF. A minor spelling error is resolved as
well ('setups' -> 'sets up').
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20210301234928.4298-3-jeff@labundy.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Some devices outside of drivers/input/touchscreen/ can still make
use of the touchscreen helper functions. Therefore, it was agreed
in [1] to move them outside of drivers/input/touchscreen/ so that
other devices can call them without INPUT_TOUCHSCREEN being set.

As part of this change, 'of' is dropped from the filename because
the helpers no longer actually use OF. No changes are made to the
file contents whatsoever.

Based on the feedback in [2], the corresponding binding documents
(touchscreen.yaml and touchscreen.txt) are left in their original
locations.

[1] https://patchwork.kernel.org/patch/11924029/
[2] https://patchwork.kernel.org/patch/12042037/Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20210301234928.4298-2-jeff@labundy.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This simplifies error unwinding path and allows us to get rid of
remove() method.
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20210321220043.318239-2-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Instead of forcing interrupt trigger to "level low" rely on the
platform to set it up according to how it is wired on the given
board.
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20210321220043.318239-1-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The bootloader can be closed using the 'execute' command (0x02) or
hardware reset. Rather than using the former option for successful
firmware update procedures and reserving the latter for recovering
the device upon failure, simply use hardware reset for all cases.

The post-bootloader initialization delay increases marginally when
triggered by a hardware reset, so increase the wait time to ensure
the device does not subsequently fail to respond.

As part of this change, refactor the return path to avoid an extra
assignment and to make the logic a bit smaller.
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20210313191236.4366-6-jeff@labundy.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The vendor-assigned firmware project number is restricted to the
generic project number (15); however the vendor may assign other
project numbers to specific applications and customers.

These custom project numbers may be based on forwards-compatible
firmware revision 1.x. However, the driver unnecessarily rejects
anything older than firmware revision 2.0.

To support other applications, remove these unnecessarily strict
checks and enter the bootloader only for truly incompatible A000
devices.
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20210313191236.4366-5-jeff@labundy.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add the read-only 'fw_info' attribute which reports information
about the device's firmware in the following format:

a.b.c.d:e.f

Where:

a = Product number (e.g. 40 for IQS550)
b = Project number (e.g. 15)
c = Firmware revision (major)
d = Firmware revision (minor)
e = Customer-assigned exported file version (major)
f = Customer-assigned exported file version (minor)

As part of the corresponding rework to uses of 'bl_status', the
IQS5XX_BL_STATUS_RESET definition is dropped with 0 used in its
place instead.
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20210313191236.4366-4-jeff@labundy.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Set the maximum ABS_MT_PRESSURE value and use the existing U16_MAX
definition instead of a magic number to validate ABS_MT_POSITION_X
and ABS_MT_POSITION_Y.

Also use input_set_abs_params() rather than input_abs_set_max() to
avoid having to call input_set_capability() separately.
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20210313191236.4366-3-jeff@labundy.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Replace 'http' with 'https' and correct the spelling of the nearby
word 'datasheet'.
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20210313191236.4366-2-jeff@labundy.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

s/subsytem/subsystem/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210322022030.3857089-1-unixbhaskar@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We want to be able to report the input event as soon as the debounce
delay elapsed. However, the current code does not really ensure that,
as it uses the jiffies-based schedule_delayed_work() API. With a small
enough HZ value (HZ <= 100), this results in some input events being
lost, when a key is quickly pressed then released (on a human's time
scale).

Switching to hrtimers fixes this issue, and will work even on extremely
low HZ values (tested at HZ=24). This is however only possible if
reading the GPIO is possible without sleeping. If this condition is not
met, the previous approach of using a jiffies-based timer is taken.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20210307222240.380583-3-paul@crapouillou.netSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Dealing with input, timing is important; if the button should be
released in one millisecond, then it should be done in one millisecond
and not a hundred milliseconds.

Therefore, the standard timer API is not really suitable for this task.

Convert the gpio-keys driver to use a hrtimer instead of the standard
timer to address this issue.

Note that by using a hard IRQ for the hrtimer callback, we can get rid
of the spin_lock_irqsave() and spin_unlock_irqrestore().
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20210307222240.380583-2-paul@crapouillou.netSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The input_sync() function is already called after the loop in
gpio_keys_report_state(), so it does not need to be called after each
iteration within gpio_keys_gpio_report_event().
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20210307222240.380583-1-paul@crapouillou.netSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The old device property API is about to be removed, so
explaing how to use complete software nodes instead.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210304090948.27014-1-heikki.krogerus@linux.intel.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The touchscreen can be a wake up source and it's being used in DTS:

  arch/arm/boot/dts/exynos5250-spring.dt.yaml:
    trackpad@4b: 'wakeup-source' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210212163806.69996-1-krzk@kernel.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The for loop is just a complicate way to express a division. Replace it
by the actual division which is both simpler to understand for a human
and more efficient for a CPU to calculate.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20210316212233.50765-1-uwe@kleine-koenig.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull ext4 fixes from Ted Ts'o:
 "Miscellaneous ext4 bug fixes for v5.12"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: initialize ret to suppress smatch warning
  ext4: stop inode update before return
  ext4: fix rename whiteout with fast commit
  ext4: fix timer use-after-free on failed mount
  ext4: fix potential error in ext4_do_update_inode
  ext4: do not try to set xattr into ea_inode if value is empty
  ext4: do not iput inode under running transaction in ext4_rename()
  ext4: find old entry again if failed to rename whiteout
  ext4: fix error handling in ext4_end_enable_verity()
  ext4: fix bh ref count on error paths
  fs/ext4: fix integer overflow in s_log_groups_per_flex
  ext4: add reclaim checks to xattr code
  ext4: shrink race window in ext4_should_retry_alloc()

Pull io_uring followup fixes from Jens Axboe:

 - The SIGSTOP change from Eric, so we properly ignore that for
   PF_IO_WORKER threads.

 - Disallow sending signals to PF_IO_WORKER threads in general, we're
   not interested in having them funnel back to the io_uring owning
   task.

 - Stable fix from Stefan, ensuring we properly break links for short
   send/sendmsg recv/recvmsg if MSG_WAITALL is set.

 - Catch and loop when needing to run task_work before a PF_IO_WORKER
   threads goes to sleep.

* tag 'io_uring-5.12-2021-03-21' of git://git.kernel.dk/linux-block:
  io_uring: call req_set_fail_links() on short send[msg]()/recv[msg]() with MSG_WAITALL
  io-wq: ensure task is running before processing task_work
  signal: don't allow STOP on PF_IO_WORKER threads
  signal: don't allow sending any signals to PF_IO_WORKER threads

Pull staging and IIO driver fixes from Greg KH:
 "Some small staging and IIO driver fixes:

   - MAINTAINERS changes for the move of the staging mailing list

   - comedi driver fixes to get request_irq() to work correctly

   - counter driver fixes for reported issues with iio devices

   - tiny iio driver fixes for reported issues.

  All of these have been in linux-next with no reported problems"

* tag 'staging-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: vt665x: fix alignment constraints
  staging: comedi: cb_pcidas64: fix request_irq() warn
  staging: comedi: cb_pcidas: fix request_irq() warn
  MAINTAINERS: move the staging subsystem to lists.linux.dev
  MAINTAINERS: move some real subsystems off of the staging mailing list
  iio: gyro: mpu3050: Fix error handling in mpu3050_trigger_handler
  iio: hid-sensor-temperature: Fix issues of timestamp channel
  iio: hid-sensor-humidity: Fix alignment issue of timestamp channel
  counter: stm32-timer-cnt: fix ceiling miss-alignment with reload register
  counter: stm32-timer-cnt: fix ceiling write max value
  counter: stm32-timer-cnt: Report count function when SLAVE_MODE_DISABLED
  iio: adc: ab8500-gpadc: Fix off by 10 to 3
  iio:adc:stm32-adc: Add HAS_IOMEM dependency
  iio: adis16400: Fix an error code in adis16400_initial_setup()
  iio: adc: adi-axi-adc: add proper Kconfig dependencies
  iio: adc: ad7949: fix wrong ADC result due to incorrect bit mask
  iio: hid-sensor-prox: Fix scale not correct issue
  iio:adc:qcom-spmi-vadc: add default scale to LR_MUX2_BAT_ID channel

Pull USB and Thunderbolt driver fixes from Greg KH:
 "Here are some small Thunderbolt and USB driver fixes for some reported
  issues:

   - thunderbolt fixes for minor problems

   - typec fixes for power issues

   - usb-storage quirk addition

   - usbip bugfix

   - dwc3 bugfix when stopping transfers

   - cdnsp bugfix for isoc transfers

   - gadget use-after-free fix

  All have been in linux-next this week with no reported issues"

* tag 'usb-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: typec: tcpm: Skip sink_cap query only when VDM sm is busy
  usb: dwc3: gadget: Prevent EP queuing while stopping transfers
  usb: typec: tcpm: Invoke power_supply_changed for tcpm-source-psy-
  usb: typec: Remove vdo[3] part of tps6598x_rx_identity_reg struct
  usb-storage: Add quirk to defeat Kindle's automatic unload
  usb: gadget: configfs: Fix KASAN use-after-free
  usbip: Fix incorrect double assignment to udc->ud.tcp_rx
  usb: cdnsp: Fixes incorrect value in ISOC TRB
  thunderbolt: Increase runtime PM reference count on DP tunnel discovery
  thunderbolt: Initialize HopID IDAs in tb_switch_alloc()

Pull irq fix from Ingo Molnar:
 "A change to robustify force-threaded IRQ handlers to always disable
  interrupts, plus a DocBook fix.

  The force-threaded IRQ handler change has been accelerated from the
  normal schedule of such a change to keep the bad pattern/workaround of
  spin_lock_irqsave() in handlers or IRQF_NOTHREAD as a kludge from
  spreading"

* tag 'irq-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Disable interrupts for force threaded handlers
  genirq/irq_sim: Fix typos in kernel doc (fnode -> fwnode)

Pull perf fixes from Ingo Molnar:
 "Boundary condition fixes for bugs unearthed by the perf fuzzer"

* tag 'perf-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Fix unchecked MSR access error caused by VLBR_EVENT
  perf/x86/intel: Fix a crash caused by zero PEBS status

Pull locking fixes from Ingo Molnar:

 - Get static calls & modules right. Hopefully.

 - WW mutex fixes

* tag 'locking-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  static_call: Fix static_call_update() sanity check
  static_call: Align static_call_is_init() patching condition
  static_call: Fix static_call_set_init()
  locking/ww_mutex: Fix acquire/release imbalance in ww_acquire_init()/ww_acquire_fini()
  locking/ww_mutex: Simplify use_ww_ctx & ww_ctx handling

Pull EFI fixes from Ingo Molnar:

 - another missing RT_PROP table related fix, to ensure that the
   efivarfs pseudo filesystem fails gracefully if variable services
   are unsupported

 - use the correct alignment for literal EFI GUIDs

 - fix a use after unmap issue in the memreserve code

* tag 'efi-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: use 32-bit alignment for efi_guid_t literals
  firmware/efi: Fix a use after bug in efi_mem_reserve_persistent
  efivars: respect EFI_UNSUPPORTED return from firmware

Pull x86 fixes from Borislav Petkov:
 "The freshest pile of shiny x86 fixes for 5.12:

   - Add the arch-specific mapping between physical and logical CPUs to
     fix devicetree-node lookups

   - Restore the IRQ2 ignore logic

   - Fix get_nr_restart_syscall() to return the correct restart syscall
     number. Split in a 4-patches set to avoid kABI breakage when
     backporting to dead kernels"

* tag 'x86_urgent_for_v5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic/of: Fix CPU devicetree-node lookups
  x86/ioapic: Ignore IRQ2 again
  x86: Introduce restart_block->arch_data to remove TS_COMPAT_RESTART
  x86: Introduce TS_COMPAT_RESTART to fix get_nr_restart_syscall()
  x86: Move TS_COMPAT back to asm/thread_info.h
  kernel, fs: Introduce and use set_restart_fn() and arch_set_restart_data()

Pull powerpc fixes from Michael Ellerman:

 - Fix a possible stack corruption and subsequent DLPAR failure in the
   rpadlpar_io PCI hotplug driver

 - Two build fixes for uncommon configurations

Thanks to Christophe Leroy and Tyrel Datwyler.

* tag 'powerpc-5.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  PCI: rpadlpar: Fix potential drc_name corruption in store functions
  powerpc: Force inlining of cpu_has_feature() to avoid build failure
  powerpc/vdso32: Add missing _restgpr_31_x to fix build failure

Without that it's not safe to use them in a linked combination with
others.

Now combinations like IORING_OP_SENDMSG followed by IORING_OP_SPLICE
should be possible.

We already handle short reads and writes for the following opcodes:

- IORING_OP_READV
- IORING_OP_READ_FIXED
- IORING_OP_READ
- IORING_OP_WRITEV
- IORING_OP_WRITE_FIXED
- IORING_OP_WRITE
- IORING_OP_SPLICE
- IORING_OP_TEE

Now we have it for these as well:

- IORING_OP_SENDMSG
- IORING_OP_SEND
- IORING_OP_RECVMSG
- IORING_OP_RECV

For IORING_OP_RECVMSG we also check for the MSG_TRUNC and MSG_CTRUNC
flags in order to call req_set_fail_links().

There might be applications arround depending on the behavior
that even short send[msg]()/recv[msg]() retuns continue an
IOSQE_IO_LINK chain.

It's very unlikely that such applications pass in MSG_WAITALL,
which is only defined in 'man 2 recvmsg', but not in 'man 2 sendmsg'.

It's expected that the low level sock_sendmsg() call just ignores
MSG_WAITALL, as MSG_ZEROCOPY is also ignored without explicitly set
SO_ZEROCOPY.

We also expect the caller to know about the implicit truncation to
MAX_RW_COUNT, which we don't detect.

cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/c4e1a4cc0d905314f4d5dc567e65a7b09621aab3.1615908477.git.metze@samba.orgSigned-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Mark the current task as running if we need to run task_work from the
io-wq threads as part of work handling. If that is the case, then return
as such so that the caller can appropriately loop back and reset if it
was part of a going-to-sleep flush.

Fixes: 3bfe6106 ("io-wq: fork worker threads from original task")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Just like we don't allow normal signals to IO threads, don't deliver a
STOP to a task that has PF_IO_WORKER set. The IO threads don't take
signals in general, and have no means of flushing out a stop either.

Longer term, we may want to look into allowing stop of these threads,
as it relates to eg process freezing. For now, this prevents a spin
issue if a SIGSTOP is delivered to the parent task.
Reported-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

They don't take signals individually, and even if they share signals with
the parent task, don't allow them to be delivered through the worker
thread. Linux does allow this kind of behavior for regular threads, but
it's really a compatability thing that we need not care about for the IO
threads.
Reported-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>