- 30 Apr, 2012 10 commits
-
-
Javier M. Mellid authored
This patch uses dynamic debug support. Tested with SM712 Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Javier M. Mellid authored
This patch remove dead code. Tested with SM712. Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Javier M. Mellid authored
This patch removes obsolete references to previous code and non updated comments. Tested with SM712 Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lars-Peter Clausen authored
Add the new out-of-staging IIO directory to the IIO MAINTAINERS file entry. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Hennerich authored
There is currently no user, but we might need it in future. So better add it now, before we have to convert drivers afterwards. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Hennerich authored
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Hennerich authored
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Hennerich authored
Generalize naming to allow other frequency synthesis techniques as well. No functional changes. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lars-Peter Clausen authored
Currently we use two different naming schemes in the IIO API, iio_verb_object and iio_object_verb. E.g iio_device_register and iio_allocate_device. This patches renames instances of the later to the former. The patch also renames allocate to alloc as this seems to be the preferred form throughout the kernel. In particular the following renames are performed by the patch: iio_put_device -> iio_device_put iio_allocate_device -> iio_device_alloc iio_free_device -> iio_device_free iio_get_trigger -> iio_trigger_get iio_put_trigger -> iio_trigger_put iio_allocate_trigger -> iio_trigger_alloc iio_free_trigger -> iio_trigger_free The conversion was done with the following coccinelle patch with manual fixes to comments and documentation. <smpl> @@ @@ -iio_put_device +iio_device_put @@ @@ -iio_allocate_device +iio_device_alloc @@ @@ -iio_free_device +iio_device_free @@ @@ -iio_get_trigger +iio_trigger_get @@ @@ -iio_put_trigger +iio_trigger_put @@ @@ -iio_allocate_trigger +iio_trigger_alloc @@ @@ -iio_free_trigger +iio_trigger_free </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Roland Stigge authored
Previously, the touchscreen and ADC drivers of the LPC32xx SoC had a Kconfig conflict declared because they use the same hardware. Upon the introduction of device tree support in both drivers, the conflict must be removed to enable the same kernel to support different hardware (configured via the device tree). Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 26 Apr, 2012 2 commits
-
-
Greg Kroah-Hartman authored
This moves the VME core, VME board drivers, and VME bridge drivers out of the drivers/staging/vme/ area to drivers/vme/. The VME device drivers have not moved out yet due to some API questions they are still working through, that should happen soon, hopefully. Cc: Martyn Welch <martyn.welch@ge.com> Cc: Manohar Vanga <manohar.vanga@cern.ch> Cc: Vincent Bossier <vincent.bossier@gmail.com> Cc: "Emilio G. Cota" <cota@braap.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rupesh Gujare authored
Signed-off-by: Rupesh Gujare <rgujare@ozmodevices.com> Signed-off-by: Chris Kelly <ckelly@ozmodevices.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 25 Apr, 2012 19 commits
-
-
Greg Kroah-Hartman authored
Fix up some broken printk strings that were spanning multiple lines, making it hard to search for them. Cc: Manohar Vanga <manohar.vanga@cern.ch> Cc: Martyn Welch <martyn.welch@ge.com> Cc: "Emilio G. Cota" <cota@braap.org> Cc: Dan Carpenter <error27@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jonathan Cameron authored
This file contains only the most generic elements. Other class specific and device specific ABI documents will follow over time. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jonathan Cameron authored
Take the core support + the kfifo buffer implentation out of staging. Whilst we are far from done in improving this subsystem it is now at a stage where the userspae interfaces (provided by the core) can be considered stable. Drivers will follow over a longer time scale. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jonathan Cameron authored
Step 1 in moving the IIO core out of staging. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jonathan Cameron authored
Just a couple of things I came across whilst reviewing this file for moving out of staging. I doubt anyone cares, but seemed sensible to fix them now! Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jonathan Cameron authored
These two attributes are only used in the one driver. Whilst they are fairly general I'm not entirely happy committing to them at this stage. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Masanari Iida authored
Correct spelling in comments withon staging/ozwpan Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Chris Kelly <ckelly@ozmodevices.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Minchan Kim authored
MM code always uses PageXXX to handle page flags. Let's keep the consistency. Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lars-Peter Clausen authored
There is one device supported by the driver which is not listed in the Kconfig help test. This patch adds it. Also we are past the point were we can possible fit all devices supported by the driver in the Kconfig entry title, so just list the initial device that was supported by this driver and note that similar devices are supported as well. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lars-Peter Clausen authored
The AD5662 is compatible to the AD5660, but uses an external reference instead of an internal. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lars-Peter Clausen authored
We can not read back the value from the device, but we cache the value anyway so we might as well return the cached value instead of an error. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lars-Peter Clausen authored
The devices supported by this drivers only have a single shift register, which contains both the power down mode and the output sample. So writing the power down mode and the output sample can be done by the same function. Call this function prepare_write as it will prepare the spi message for a write. Also introduce a small helper function which performs the whole write by calling the chip the specific prepare function followed by a spi_sync. The two power down bits are always placed ontop of the msb of the output sample, so we can easily calculate their position by adding the channels shift to the channels realbits. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lars-Peter Clausen authored
Use extended channel attributes instead of raw sysfs files for the additional channel attributes. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lars-Peter Clausen authored
There are three identical chip_info entries. Remove two of them and use the id of the remaining entry for all three device table entries. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lars-Peter Clausen authored
Use the chip_info's int_vref_mv field to decide whether a certain chip has a internal reference or not. There is no need to check for individual chip ids. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lars-Peter Clausen authored
Remove the unused "poll_work" field from the ad5446_state struct. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lars-Peter Clausen authored
We currently only write 16 bit in case where we should write 24 bit. The spi message length is calculated from the channel storage_size, but since the storage size is only 16 bit we end up with the wrong value for devices which have power down bits and thus a register with 24 bit. Since each store function knows how many bytes it has to write just use the spi_write function from there instead of going through the hassle of manually preparing a spi_message and keeping buffers in the state struct. Another advantage of this patch is that it will make implementing support for similar I2C based DACs much easier. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lars-Peter Clausen authored
AD5620_LOAD and AD5446_LOAD are both 0, so all these three functions are identical and we can replace them with only one. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lars-Peter Clausen authored
Both the powerdown mode bits and the sample value are stored in the same register, so writing a sample while the device is powered down will clear the power down bits. To avoid this only update the cached value when the device is powered down. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> ---- v1 actually had a small bug in that it would still write to the device's register when the sample was updated while the device was powered down. This was not critical since it would send out the powerdown mode again. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 24 Apr, 2012 9 commits
-
-
Jon Brenner authored
TAOS (version 9a) tsl2x7x driver change / bug fix. Fixed - removed decimal multiplications. Added missing 'static' declarations Fixed _read_raw case logic to allow reading of _PROCESSED IIO_LIGHT Replaced udelay with mdelay to accomodate eabi. Signed-off-by: Jon Brenner <jbrenner@taosinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jon Brenner authored
TAOS device driver (version 9) for the tsl/tmd 2771 and 2772 device families (inc. all variants). Update: Removed bonus lines. Signed-off-by: Jon Brenner <jbrenner@taosinc.com> Acked-by: Jonathan Cameron<jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gerard Snitselaar authored
s626_attach is referencing s626_pci_table which is annotated __devinitconst. Put pci vendor/device ids in the s626_board struct and use s626_boards instead similar to what is done in gsc_hpdi. v2: I had moved the PCI id defines to s626.h earlier, but later decided to leave them in s626.c and forgot to move them up above where they are being used in s626_boards. Signed-off-by: Gerard Snitselaar <dev@snitselaar.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Move the module_init/module_exit routines and the associated struct comedi_driver variable to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Also, move the do_config function to remove needing to have a forward declaration for that routine. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Mori Hess <fmhess@users.sourceforge.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Move the module_init/module_exit routines and the associated struct comedi_driver and struct boardtype variables to the end of the source. This is more typical of how other drivers are written and removes the need to the forward declarations. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Mori Hess <fmhess@users.sourceforge.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Move the module_init/module_exit routines and variables to the end of the source as is more typically done with other drivers. Then rearrange the attach/detach and probe/remove functions, this removes the need for all the forward declarations. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Mori Hess <fmhess@users.sourceforge.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Move the struct comedi_driver variable and the associated attach/detach routines to remove the need for the forward declarations. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Mori Hess <fmhess@users.sourceforge.net> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Move the struct comedi_driver variable and the associated attach/detach routines to remove the need for the forward declarations. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Mori Hess <fmhess@users.sourceforge.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Move the struct comedi_driver variable and the associated attach/detach routines to remove the need for the forward declarations. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Mori Hess <fmhess@users.sourceforge.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-