- 23 Mar, 2007 24 commits
-
-
Dmitry Torokhov authored
Input: i8042 - really suppress ACK/NAK during panic blink On some boxes panic blink procedure manages to send both bytes to keyboard contoller before getting first ACK so we need to make i8042_suppress_kbd_ack a counter instead of boolean. Cc: Chuck Ebbert <cebbert@redhat.com> Signed-off-by:
Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Samuel Ortiz authored
Without this initialization one gets kernel BUG at kernel/rtmutex_common.h:80! This patch should also be included in the -stable kernel. Signed-off-by:
G. Liakhovetski <gl@dsa-ac.de> Signed-off-by:
Samuel Ortiz <samuel@sortiz.org> Cc: David Miller <davem@davemloft.net> Signed-off-by:
-
David Miller authored
[SPARC64]: Get DEBUG_PAGEALLOC working again. We have to make sure to use base-pagesize TLB entries even during the early transition period where we need TLB miss handling but don't have the kernel page tables setup yet for the linear region. Also, it is necessary therefore to not use the 4MB TSB for these translations, and instead use the normal kernel TSB. This allows us to also get rid of the 4MB tsb for debug builds which shrinks the kernel a little bit. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
David Miller authored
[SPARC64]: Add missing HPAGE_MASK masks on address parameters. These pte loops all assume the passed in address is HPAGE aligned, make sure that is actually true. Signed-off-by:
-
Alexey Dobriyan authored
[NET]: Copy mac_len in skb_clone() as well ANK says: "It is rarely used, that's wy it was not noticed. But in the places, where it is used, it should be disaster." Signed-off-by:
Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by:
-
Masayuki Nakagawa authored
[IPV6]: ipv6_fl_socklist is inadvertently shared. The ipv6_fl_socklist from listening socket is inadvertently shared with new socket created for connection. This leads to a variety of interesting, but fatal, bugs. For example, removing one of the sockets may lead to the other socket's encountering a page fault when the now freed list is referenced. The fix is to not share the flow label list with the new socket. Signed-off-by:
Masayuki Nakagawa <nakagawa.msy@ncos.nec.co.jp> Signed-off-by:
-
Robert Olsson authored
[IPV4]: Do not disable preemption in trie_leaf_remove(). Hello, Just discussed this Patrick... We have two users of trie_leaf_remove, fn_trie_flush and fn_trie_delete both are holding RTNL. So there shouldn't be need for this preempt stuff. This is assumed to a leftover from an older RCU-take. > Mhh .. I think I just remembered something - me incorrectly suggesting > to add it there while we were talking about this at OLS :) IIRC the > idea was to make sure tnode_free (which at that time didn't use > call_rcu) wouldn't free memory while still in use in a rcu read-side > critical section. It should have been synchronize_rcu of course, > but with tnode_free using call_rcu it seems to be completely > unnecessary. So I guess we can simply remove it. Signed-off-by:
Robert Olsson <robert.olsson@its.uu.se> Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Joy Latten authored
[XFRM]: Fix missing protocol comparison of larval SAs. I noticed that in xfrm_state_add we look for the larval SA in a few places without checking for protocol match. So when using both AH and ESP, whichever one gets added first, deletes the larval SA. It seems AH always gets added first and ESP is always the larval SA's protocol since the xfrm->tmpl has it first. Thus causing the additional km_query() Adding the check eliminates accidental double SA creation. Signed-off-by:
Joy Latten <latten@austin.ibm.com> Signed-off-by:
-
Francois Romieu authored
Initialize the timer with the rest of the private-struct. Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Signed-off-by:
Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Andy Isaacson authored
When iterating through an array, one must be careful to test one's index variable rather than another similarly-named variable. The loop will read off the end of conf->disks[] in the following (pathological) case: % dd bs=1 seek=840716287 if=/dev/zero of=d1 count=1 % for i in 2 3 4; do dd if=/dev/zero of=d$i bs=1k count=$(($i+150)); done % ./vmlinux ubd0=root ubd1=d1 ubd2=d2 ubd3=d3 ubd4=d4 # mdadm -C /dev/md0 --level=linear --raid-devices=4 /dev/ubd[1234] adding some printks, I saw this: [42949374.960000] hash_spacing = 821120 [42949374.960000] cnt = 4 [42949374.960000] min_spacing = 801 [42949374.960000] j=0 size=820928 sz=820928 [42949374.960000] i=0 sz=820928 hash_spacing=820928 [42949374.960000] j=1 size=64 sz=64 [42949374.960000] j=2 size=64 sz=128 [42949374.960000] j=3 size=64 sz=192 [42949374.960000] j=4 size=1515870810 sz=1515871002 Cc: Gautham R Shenoy <ego@in.ibm.com> Acked-by:
Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Thomas Gleixner authored
The maximum seconds value we can handle on 32bit is LONG_MAX. Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Thomas Gleixner authored
hrtimer_forward() does not check for the possible overflow of timer->expires. This can happen on 64 bit machines with large interval values and results currently in an endless loop in the softirq because the expiry value becomes negative and therefor the timer is expired all the time. Check for this condition and set the expiry value to the max. expiry time in the future. The fix should be applied to stable kernel series as well. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Trond Myklebust authored
Looks like we need a check in nfs_getattr() for a regular file. It makes no sense to call nfs_sync_mapping_range() on anything else. I think that should fix your problem: it will stop the NFS client from interfering with dirty pages on that inode's mapping. Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Ingo Molnar authored
Testing of -rt by IBM uncovered a locking bug in wake_futex_pi(): the PI state needs to be locked before we access it. Signed-off-by:
-
Zilvinas Valinskas authored
Fixes a bogus lockdep warning which causes lockdep to disable itself. Acked-by:
-
Alan Stern authored
This patch (as870) adds a delay to ehci-hcd's bus_resume routine. Apparently there are controllers and/or BIOSes out there which need such a delay to get the ports back into their correct state. This fixes Bugzilla #8190. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Nick Piggin authored
madvise(MADV_REMOVE) can go into an infinite loop or cause an oops if the call covers a region from the start of a vma, and extending past that vma. Signed-off-by:
Nick Piggin <npiggin@suse.de> Cc: Badari Pulavarty <pbadari@us.ibm.com> Acked-by:
Hugh Dickins <hugh@veritas.com> Signed-off-by:
-
Jan Beulich authored
adjust legacy IDE resource setting (v2) The change to force legacy mode IDE channels' resources to fixed non-zero values confuses (at least some versions of) X, because the values reported by the kernel and those readable from PCI config space aren't consistent anymore. Therefore, this patch arranges for the respective BARs to also get updated if possible. Signed-off-by:
Jan Beulich <jbeulich@novell.com> Acked-by:
Alan Cox <alan@redhat.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Chuck Ebbert <cebbert@redhat.com> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
[IA64] fix NULL pointer in ia64/irq_chip-mask/unmask function This patch fixes boot failure because irq_desc->mask() is NULL. - Added mask/unmask functions to ia64's irq desc function table. - rename hw_interrupt_type to irq_chip. hw_interrupt_type is old name. - Tony: Added same change to arch/ia64/sn/kernel/irq.c as pointed out by Eric Biederman ... mask/unmask functions there can be no-op. Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
Tony Luck <tony.luck@intel.com> Cc: Chuck Ebbert <cebbert@redhat.com> Signed-off-by:
-
Michal Miroslaw authored
[NETFILTER]: nfnetlink_log: fix reference counting Fix reference counting (memory leak) problem in __nfulnl_send() and callers related to packet queueing. Signed-off-by:
Michal Miroslaw <mirq-linux@rere.qmqm.pl> Signed-off-by:
-
Paul Moore authored
The current CIPSO engine has a problem where it does not verify that the given sensitivity level has a valid CIPSO mapping when the "std" CIPSO DOI type is used. The end result is that bad packets are sent on the wire which should have never been sent in the first place. This patch corrects this problem by verifying the sensitivity level mapping similar to what is done with the category mapping. This patch also changes the returned error code in this case to -EPERM to better match what the category mapping verification code returns. Signed-off-by:
Paul Moore <paul.moore@hp.com> Acked-by:
James Morris <jmorris@namei.org> Signed-off-by:
-
Joerg Dorchain authored
Recent alterations to the gdth_fill_raw_cmd() path no longer set the sg_ranz field for zero transfer commands. However, this field is used lower down in the function to initialise ha->cmd_len to the size of the firmware packet. If this uninitialised field contains a bogus value, ha->cmd_len can become much larger than the actual firmware packet and end up oopsing in gdth_copy_cmd() as it tries to copy this huge packet to the device (usually because it runs into an unallocated page). The fix is to initialise the sg_ranz field to zero at the start of gdth_fill_raw_cmd(). Signed-off-by:
Joerg Dorchain <joerg@dorchain.net> Acked-by:
"Achim Leubner" <Achim_Leubner@adaptec.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by:
-
Evgeniy Polyakov authored
[IPV4]: Fix rtm_to_ifaddr() error handling. Return negative error value (embedded in the pointer) instead of returning NULL. Signed-off-by:
Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by:
-
Olaf Kirch authored
[IPV6]: Fix for ipv6_setsockopt NULL dereference I came across this bug in http://bugzilla.kernel.org/show_bug.cgi?id=8155Signed-off-by:
Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by:
-
- 13 Mar, 2007 16 commits
-
-
Greg Kroah-Hartman authored
-
Herbert Xu authored
[UDP]: Reread uh pointer after pskb_trim The header may have moved when trimming. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Eric Dumazet authored
[INET]: twcal_jiffie should be unsigned long, not int Signed-off-by:
Eric Dumazet <dada1@cosmosbay.com> Signed-off-by:
-
David Miller authored
[SPARC]: Fix bus handling in build_device_resources(). We mistakedly modify 'bus' in the innermost loop. What should happen is that at each register index iteration, we start with the same 'bus'. So preserve it's value at the top level, and use a loop local variable 'dbus' for iteration. This bug causes registers other than the first to be decoded improperly. Signed-off-by:
-
Philipp Reisner authored
[CONNECTOR]: Bugfix for cn_call_callback() When system under heavy stress and must allocate new work instead of reusing old one, new work must use correct completion callback. Patch is based on Philipp's and Lars' work. I only cleaned small stuff (and removed spaces instead of tabs). Signed-off-by:
Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by:
Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by:
-
Rainer Weikusat authored
At least the Keyspan USA-19HS USB-to-serial converter supports two different configurations, one where the input endpoints have interrupt transfer type and one where they are bulk endpoints. The default UHCI configuration uses the interrupt input endpoints. The keyspan driver, OTOH, assumes that the device has only bulk endpoints (all URBs are initialized by calling usb_fill_bulk_urb in keyspan.c/ keyspan_setup_urb). This causes the interval field of the input URBs to have a value of zero instead of one, which 'accidentally' worked with Linux at least up to 2.6.17.11 but stopped to with 2.6.18, which changed the UHCI support code handling URBs for interrupt endpoints. The patch below modifies to driver to initialize its input URBs either as interrupt or as bulk URBs, depending on the transfertype contained in the associated endpoint descriptor (only tested with the default configuration) enabling the driver to again receive data from the serial converter. Greg K-H reworked the patch. Signed-off-by:
Rainer Weikusat <rweikusat@sncag.com> Signed-off-by:
-
Johannes Berg authored
[NET]: Fix compat_sock_common_getsockopt typo. This patch fixes a typo in compat_sock_common_getsockopt. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Acked-by:
-
Larry Finger authored
Some versions of the bcm43xx chips only support 30-bit DMA, which means that the descriptors and buffers must be in the first 1 GB of RAM. On the i386 and x86_64 architectures with more than 1 GB RAM, an incorrect assignment may occur. This patch ensures that the various DMA addresses are within the capability of the chip. Testing has been limited to x86_64 as no one has an i386 system with more than 1 GB RAM. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Cc: Chuck Ebbert <cebbert@redhat.com> Signed-off-by:
-
Douglas Gilbert authored
- addresses the reported bug (with GFP_KERNEL -> GFP_ATOMIC) - improves error checking, and - is a subset of the changes to scsi_debug in lk 2.6.21-rc* Compiled and lightly tested (in lk 2.6.21-rc2 environment). Signed-off-by:
Douglas Gilbert <dougg@torque.net> Signed-off-by:
-
Patrick McHardy authored
[NETFILTER]: nfnetlink_log: fix crash on bridged packet physoutdev is only set on purely bridged packet, when nfnetlink_log is used in the OUTPUT/FORWARD/POSTROUTING hooks on packets forwarded from or to a bridge it crashes when trying to dereference skb->nf_bridge->physoutdev. Reported by Holger Eitzenberger <heitzenberger@astaro.com> Signed-off-by:
-
Patrick McHardy authored
[NETFILTER]: nfnetlink_log: zero-terminate prefix Userspace expects a zero-terminated string, so include the trailing zero in the netlink message. Signed-off-by:
-
Patrick McHardy authored
[NETFILTER]: nf_conntrack: fix incorrect classification of IPv6 fragments as ESTABLISHED The individual fragments of a packet reassembled by conntrack have the conntrack reference from the reassembled packet attached, but nfctinfo is not copied. This leaves it initialized to 0, which unfortunately is the value of IP_CT_ESTABLISHED. The result is that all IPv6 fragments are tracked as ESTABLISHED, allowing them to bypass a usual ruleset which accepts ESTABLISHED packets early. Signed-off-by:
-
Yasuyuki Kozakai authored
[NETFILTER]: ip6_route_me_harder should take into account mark Signed-off-by:
Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by:
-
Michal Miroslaw authored
[NETFILTER]: nfnetlink_log: fix possible NULL pointer dereference Eliminate possible NULL pointer dereference in nfulnl_recv_config(). Signed-off-by:
-
Micha Mirosaw authored
[NETFILTER]: nfnetlink_log: fix NULL pointer dereference Fix the nasty NULL dereference on multiple packets per netlink message. BUG: unable to handle kernel NULL pointer dereference at virtual address 00000004 printing eip: f8a4b3bf *pde = 00000000 Oops: 0002 [#1] SMP Modules linked in: nfnetlink_log ipt_ttl ipt_REDIRECT xt_tcpudp iptable_nat nf_nat nf_conntrack _ipv4 xt_state ipt_ipp2p xt_NFLOG xt_hashlimit ip6_tables iptable_filter xt_multiport xt_mark i pt_set iptable_raw xt_MARK iptable_mangle ip_tables cls_fw cls_u32 sch_esfq sch_htb ip_set_ipma p ip_set ipt_ULOG x_tables dm_snapshot dm_mirror loop e1000 parport_pc parport e100 floppy ide_ cd cdrom CPU: 0 EIP: 0060:[<f8a4b3bf>] Not tainted VLI EFLAGS: 00010206 (2.6.20 #5) EIP is at __nfulnl_send+0x24/0x51 [nfnetlink_log] eax: 00000000 ebx: f2b5cbc0 ecx: c03f5f54 edx: c03f4000 esi: f2b5cbc8 edi: c03f5f54 ebp: f8a4b3ec esp: c03f5f30 ds: 007b es: 007b ss: 0068 Process swapper (pid: 0, ti=c03f4000 task=c03bece0 task.ti=c03f4000) Stack: f2b5cbc0 f8a4b401 00000100 c0444080 c012af49 00000000 f6f19100 f6f19000 c1707800 c03f5f54 c03f5f54 00000123 00000021 c03e8d08 c0426380 00000009 c0126932 00000000 00000046 c03e9980 c03e6000 0047b007 c01269bd 00000000 Call Trace: [<f8a4b401>] nfulnl_timer+0x15/0x25 [nfnetlink_log] [<c012af49>] run_timer_softirq+0x10a/0x164 [<c0126932>] __do_softirq+0x60/0xba [<c01269bd>] do_softirq+0x31/0x35 [<c0104f6e>] do_IRQ+0x62/0x74 [<c01036cb>] common_interrupt+0x23/0x28 [<c0101018>] default_idle+0x0/0x3f [<c0101045>] default_idle+0x2d/0x3f [<c01010fa>] cpu_idle+0xa0/0xb9 [<c03fb7f5>] start_kernel+0x1a8/0x1ac [<c03fb293>] unknown_bootoption+0x0/0x181 ======================= Code: 5e 5f 5b 5e 5f 5d c3 53 89 c3 8d 40 1c 83 7b 1c 00 74 05 e8 2c ee 6d c7 83 7b 14 00 75 04 31 c0 eb 34 83 7b 10 01 76 09 8b 43 18 <66> c7 40 04 03 00 8b 53 34 8b 43 14 b9 40 00 00 00 e8 08 9a 84 EIP: [<f8a4b3bf>] __nfulnl_send+0x24/0x51 [nfnetlink_log] SS:ESP 0068:c03f5f30 <0>Kernel panic - not syncing: Fatal exception in interrupt <0>Rebooting in 5 seconds.. Panic no more! Signed-off-by: -
Patrick McHardy authored
[NETFILTER]: nfnetlink_log: fix use after free Paranoia: instance_put() might have freed the inst pointer when we spin_unlock_bh(). Signed-off-by:
-
