If connection isn't established yet, get_mr() will fail, trigger connection after
get_mr().

Fixes: 584a8279 ("RDS: RDMA: return appropriate error on rdma map failures")
Reported-and-tested-by: syzbot+d4faee732755bba9838e@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2024-03-05 (idpf, ice, i40e, igc, e1000e)

This series contains updates to idpf, ice, i40e, igc and e1000e drivers.

Emil disables local BH on NAPI schedule for proper handling of softirqs
on idpf.

Jake stops reporting of virtchannel RSS option which in unsupported on
ice.

Rand Deeb adds null check to prevent possible null pointer dereference
on ice.

Michal Schmidt moves DPLL mutex initialization to resolve uninitialized
mutex usage for ice.

Jesse fixes incorrect variable usage for calculating Tx stats on ice.

Ivan Vecera corrects logic for firmware equals check on i40e.

Florian Kauer prevents memory corruption for XDP_REDIRECT on igc.

Sasha reverts an incorrect use of FIELD_GET which caused a regression
for Wake on LAN on e1000e.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This bug was noticed while re-implementing parts of the kernel
driver in userspace using spidev. The goal was to enable some
of the errata workarounds that Microchip describes in their
errata sheet [1].

Both the errata sheet and the regular datasheet of e.g. the KSZ8795
imply that you need to do this for indirect register accesses:
- write a 16-bit value to a control register pair (this value
  consists of the indirect register table, and the offset inside
  the table)
- either read or write an 8-bit value from the data storage
  register (indicated by REG_IND_BYTE in the kernel)

The current implementation has the order swapped. It can be
proven, by reading back some indirect register with known content
(the EEE register modified in ksz8_handle_global_errata() is one of
these), that this implementation does not work.

Private discussion with Oleksij Rempel of Pengutronix has revealed
that the workaround was apparantly never tested on actual hardware.

[1] https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/Errata/KSZ87xx-Errata-DS80000687C.pdfSigned-off-by: Tobias Jakobi (Compleo) <tobias.jakobi.compleo@gmail.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Fixes: 7b6e6235 ("net: dsa: microchip: ksz8795: handle eee specif erratum")
Link: https://lore.kernel.org/r/20240304154135.161332-1-tobias.jakobi.compleo@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Older versions of GCC really want to know the full definition
of the type involved in rcu_assign_pointer().

struct dpll_pin is defined in a local header, net/core can't
reach it. Move all the netdev <> dpll code into dpll, where
the type is known. Otherwise we'd need multiple function calls
to jump between the compilation units.

This is the same problem the commit under fixes was trying to address,
but with rcu_assign_pointer() not rcu_dereference().

Some of the exports are not needed, networking core can't
be a module, we only need exports for the helpers used by
drivers.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/all/35a869c8-52e8-177-1d4d-e57578b99b6@linux-m68k.org/
Fixes: 640f41ed ("dpll: fix build failure due to rcu_dereference_check() on unknown type")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240305013532.694866-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot found another use-after-free in ip6_route_mpath_notify() [1]

Commit f7225172 ("net/ipv6: prevent use after free in
ip6_route_mpath_notify") was not able to fix the root cause.

We need to defer the fib6_info_release() calls after
ip6_route_mpath_notify(), in the cleanup phase.

[1]
BUG: KASAN: slab-use-after-free in rt6_fill_node+0x1460/0x1ac0
Read of size 4 at addr ffff88809a07fc64 by task syz-executor.2/23037

CPU: 0 PID: 23037 Comm: syz-executor.2 Not tainted 6.8.0-rc4-syzkaller-01035-gea7f3cfa #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
Call Trace:
 <TASK>
  __dump_stack lib/dump_stack.c:88 [inline]
  dump_stack_lvl+0x1e7/0x2e0 lib/dump_stack.c:106
  print_address_description mm/kasan/report.c:377 [inline]
  print_report+0x167/0x540 mm/kasan/report.c:488
  kasan_report+0x142/0x180 mm/kasan/report.c:601
 rt6_fill_node+0x1460/0x1ac0
  inet6_rt_notify+0x13b/0x290 net/ipv6/route.c:6184
  ip6_route_mpath_notify net/ipv6/route.c:5198 [inline]
  ip6_route_multipath_add net/ipv6/route.c:5404 [inline]
  inet6_rtm_newroute+0x1d0f/0x2300 net/ipv6/route.c:5517
  rtnetlink_rcv_msg+0x885/0x1040 net/core/rtnetlink.c:6597
  netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543
  netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline]
  netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367
  netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x221/0x270 net/socket.c:745
  ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584
  ___sys_sendmsg net/socket.c:2638 [inline]
  __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667
 do_syscall_64+0xf9/0x240
 entry_SYSCALL_64_after_hwframe+0x6f/0x77
RIP: 0033:0x7f73dd87dda9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f73de6550c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f73dd9ac050 RCX: 00007f73dd87dda9
RDX: 0000000000000000 RSI: 0000000020000140 RDI: 0000000000000005
RBP: 00007f73dd8ca47a R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000006e R14: 00007f73dd9ac050 R15: 00007ffdbdeb7858
 </TASK>

Allocated by task 23037:
  kasan_save_stack mm/kasan/common.c:47 [inline]
  kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
  poison_kmalloc_redzone mm/kasan/common.c:372 [inline]
  __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:389
  kasan_kmalloc include/linux/kasan.h:211 [inline]
  __do_kmalloc_node mm/slub.c:3981 [inline]
  __kmalloc+0x22e/0x490 mm/slub.c:3994
  kmalloc include/linux/slab.h:594 [inline]
  kzalloc include/linux/slab.h:711 [inline]
  fib6_info_alloc+0x2e/0xf0 net/ipv6/ip6_fib.c:155
  ip6_route_info_create+0x445/0x12b0 net/ipv6/route.c:3758
  ip6_route_multipath_add net/ipv6/route.c:5298 [inline]
  inet6_rtm_newroute+0x744/0x2300 net/ipv6/route.c:5517
  rtnetlink_rcv_msg+0x885/0x1040 net/core/rtnetlink.c:6597
  netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543
  netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline]
  netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367
  netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x221/0x270 net/socket.c:745
  ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584
  ___sys_sendmsg net/socket.c:2638 [inline]
  __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667
 do_syscall_64+0xf9/0x240
 entry_SYSCALL_64_after_hwframe+0x6f/0x77

Freed by task 16:
  kasan_save_stack mm/kasan/common.c:47 [inline]
  kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
  kasan_save_free_info+0x4e/0x60 mm/kasan/generic.c:640
  poison_slab_object+0xa6/0xe0 mm/kasan/common.c:241
  __kasan_slab_free+0x34/0x70 mm/kasan/common.c:257
  kasan_slab_free include/linux/kasan.h:184 [inline]
  slab_free_hook mm/slub.c:2121 [inline]
  slab_free mm/slub.c:4299 [inline]
  kfree+0x14a/0x380 mm/slub.c:4409
  rcu_do_batch kernel/rcu/tree.c:2190 [inline]
  rcu_core+0xd76/0x1810 kernel/rcu/tree.c:2465
  __do_softirq+0x2bb/0x942 kernel/softirq.c:553

Last potentially related work creation:
  kasan_save_stack+0x3f/0x60 mm/kasan/common.c:47
  __kasan_record_aux_stack+0xae/0x100 mm/kasan/generic.c:586
  __call_rcu_common kernel/rcu/tree.c:2715 [inline]
  call_rcu+0x167/0xa80 kernel/rcu/tree.c:2829
  fib6_info_release include/net/ip6_fib.h:341 [inline]
  ip6_route_multipath_add net/ipv6/route.c:5344 [inline]
  inet6_rtm_newroute+0x114d/0x2300 net/ipv6/route.c:5517
  rtnetlink_rcv_msg+0x885/0x1040 net/core/rtnetlink.c:6597
  netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543
  netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline]
  netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367
  netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x221/0x270 net/socket.c:745
  ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584
  ___sys_sendmsg net/socket.c:2638 [inline]
  __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667
 do_syscall_64+0xf9/0x240
 entry_SYSCALL_64_after_hwframe+0x6f/0x77

The buggy address belongs to the object at ffff88809a07fc00
 which belongs to the cache kmalloc-512 of size 512
The buggy address is located 100 bytes inside of
 freed 512-byte region [ffff88809a07fc00, ffff88809a07fe00)

The buggy address belongs to the physical page:
page:ffffea0002681f00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x9a07c
head:ffffea0002681f00 order:2 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0xfff00000000840(slab|head|node=0|zone=1|lastcpupid=0x7ff)
page_type: 0xffffffff()
raw: 00fff00000000840 ffff888014c41c80 dead000000000122 0000000000000000
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 2, migratetype Unmovable, gfp_mask 0x1d20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC|__GFP_HARDWALL), pid 23028, tgid 23027 (syz-executor.4), ts 2340253595219, free_ts 2339107097036
  set_page_owner include/linux/page_owner.h:31 [inline]
  post_alloc_hook+0x1ea/0x210 mm/page_alloc.c:1533
  prep_new_page mm/page_alloc.c:1540 [inline]
  get_page_from_freelist+0x33ea/0x3580 mm/page_alloc.c:3311
  __alloc_pages+0x255/0x680 mm/page_alloc.c:4567
  __alloc_pages_node include/linux/gfp.h:238 [inline]
  alloc_pages_node include/linux/gfp.h:261 [inline]
  alloc_slab_page+0x5f/0x160 mm/slub.c:2190
  allocate_slab mm/slub.c:2354 [inline]
  new_slab+0x84/0x2f0 mm/slub.c:2407
  ___slab_alloc+0xd17/0x13e0 mm/slub.c:3540
  __slab_alloc mm/slub.c:3625 [inline]
  __slab_alloc_node mm/slub.c:3678 [inline]
  slab_alloc_node mm/slub.c:3850 [inline]
  __do_kmalloc_node mm/slub.c:3980 [inline]
  __kmalloc+0x2e0/0x490 mm/slub.c:3994
  kmalloc include/linux/slab.h:594 [inline]
  kzalloc include/linux/slab.h:711 [inline]
  new_dir fs/proc/proc_sysctl.c:956 [inline]
  get_subdir fs/proc/proc_sysctl.c:1000 [inline]
  sysctl_mkdir_p fs/proc/proc_sysctl.c:1295 [inline]
  __register_sysctl_table+0xb30/0x1440 fs/proc/proc_sysctl.c:1376
  neigh_sysctl_register+0x416/0x500 net/core/neighbour.c:3859
  devinet_sysctl_register+0xaf/0x1f0 net/ipv4/devinet.c:2644
  inetdev_init+0x296/0x4d0 net/ipv4/devinet.c:286
  inetdev_event+0x338/0x15c0 net/ipv4/devinet.c:1555
  notifier_call_chain+0x18f/0x3b0 kernel/notifier.c:93
  call_netdevice_notifiers_extack net/core/dev.c:1987 [inline]
  call_netdevice_notifiers net/core/dev.c:2001 [inline]
  register_netdevice+0x15b2/0x1a20 net/core/dev.c:10340
  br_dev_newlink+0x27/0x100 net/bridge/br_netlink.c:1563
  rtnl_newlink_create net/core/rtnetlink.c:3497 [inline]
  __rtnl_newlink net/core/rtnetlink.c:3717 [inline]
  rtnl_newlink+0x158f/0x20a0 net/core/rtnetlink.c:3730
page last free pid 11583 tgid 11583 stack trace:
  reset_page_owner include/linux/page_owner.h:24 [inline]
  free_pages_prepare mm/page_alloc.c:1140 [inline]
  free_unref_page_prepare+0x968/0xa90 mm/page_alloc.c:2346
  free_unref_page+0x37/0x3f0 mm/page_alloc.c:2486
  kasan_depopulate_vmalloc_pte+0x74/0x90 mm/kasan/shadow.c:415
  apply_to_pte_range mm/memory.c:2619 [inline]
  apply_to_pmd_range mm/memory.c:2663 [inline]
  apply_to_pud_range mm/memory.c:2699 [inline]
  apply_to_p4d_range mm/memory.c:2735 [inline]
  __apply_to_page_range+0x8ec/0xe40 mm/memory.c:2769
  kasan_release_vmalloc+0x9a/0xb0 mm/kasan/shadow.c:532
  __purge_vmap_area_lazy+0x163f/0x1a10 mm/vmalloc.c:1770
  drain_vmap_area_work+0x40/0xd0 mm/vmalloc.c:1804
  process_one_work kernel/workqueue.c:2633 [inline]
  process_scheduled_works+0x913/0x1420 kernel/workqueue.c:2706
  worker_thread+0xa5f/0x1000 kernel/workqueue.c:2787
  kthread+0x2ef/0x390 kernel/kthread.c:388
  ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
  ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:242

Memory state around the buggy address:
 ffff88809a07fb00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff88809a07fb80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88809a07fc00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                       ^
 ffff88809a07fc80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff88809a07fd00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Fixes: 3b1137fe ("net: ipv6: Change notifications for multipath add to RTA_MULTIPATH")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240303144801.702646-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Refactoring of the field get conversion introduced a regression in the
legacy Wake On Lan from a magic packet with i219 devices. Rx address
copied not correctly from MAC to PHY with FIELD_GET macro.

Fixes: b9a45254 ("intel: legacy: field get conversion")
Suggested-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

When a frame can not be transmitted in XDP_REDIRECT
(e.g. due to a full queue), it is necessary to free
it by calling xdp_return_frame_rx_napi.

However, this is the responsibility of the caller of
the ndo_xdp_xmit (see for example bq_xmit_all in
kernel/bpf/devmap.c) and thus calling it inside
igc_xdp_xmit (which is the ndo_xdp_xmit of the igc
driver) as well will lead to memory corruption.

In fact, bq_xmit_all expects that it can return all
frames after the last successfully transmitted one.
Therefore, break for the first not transmitted frame,
but do not call xdp_return_frame_rx_napi in igc_xdp_xmit.
This is equally implemented in other Intel drivers
such as the igb.

There are two alternatives to this that were rejected:
1. Return num_frames as all the frames would have been
   transmitted and release them inside igc_xdp_xmit.
   While it might work technically, it is not what
   the return value is meant to represent (i.e. the
   number of SUCCESSFULLY transmitted packets).
2. Rework kernel/bpf/devmap.c and all drivers to
   support non-consecutively dropped packets.
   Besides being complex, it likely has a negative
   performance impact without a significant gain
   since it is anyway unlikely that the next frame
   can be transmitted if the previous one was dropped.

The memory corruption can be reproduced with
the following script which leads to a kernel panic
after a few seconds.  It basically generates more
traffic than a i225 NIC can transmit and pushes it
via XDP_REDIRECT from a virtual interface to the
physical interface where frames get dropped.

   #!/bin/bash
   INTERFACE=enp4s0
   INTERFACE_IDX=`cat /sys/class/net/$INTERFACE/ifindex`

   sudo ip link add dev veth1 type veth peer name veth2
   sudo ip link set up $INTERFACE
   sudo ip link set up veth1
   sudo ip link set up veth2

   cat << EOF > redirect.bpf.c

   SEC("prog")
   int redirect(struct xdp_md *ctx)
   {
       return bpf_redirect($INTERFACE_IDX, 0);
   }

   char _license[] SEC("license") = "GPL";
   EOF
   clang -O2 -g -Wall -target bpf -c redirect.bpf.c -o redirect.bpf.o
   sudo ip link set veth2 xdp obj redirect.bpf.o

   cat << EOF > pass.bpf.c

   SEC("prog")
   int pass(struct xdp_md *ctx)
   {
       return XDP_PASS;
   }

   char _license[] SEC("license") = "GPL";
   EOF
   clang -O2 -g -Wall -target bpf -c pass.bpf.c -o pass.bpf.o
   sudo ip link set $INTERFACE xdp obj pass.bpf.o

   cat << EOF > trafgen.cfg

   {
     /* Ethernet Header */
     0xe8, 0x6a, 0x64, 0x41, 0xbf, 0x46,
     0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
     const16(ETH_P_IP),

     /* IPv4 Header */
     0b01000101, 0,   # IPv4 version, IHL, TOS
     const16(1028),   # IPv4 total length (UDP length + 20 bytes (IP header))
     const16(2),      # IPv4 ident
     0b01000000, 0,   # IPv4 flags, fragmentation off
     64,              # IPv4 TTL
     17,              # Protocol UDP
     csumip(14, 33),  # IPv4 checksum

     /* UDP Header */
     10,  0, 1, 1,    # IP Src - adapt as needed
     10,  0, 1, 2,    # IP Dest - adapt as needed
     const16(6666),   # UDP Src Port
     const16(6666),   # UDP Dest Port
     const16(1008),   # UDP length (UDP header 8 bytes + payload length)
     csumudp(14, 34), # UDP checksum

     /* Payload */
     fill('W', 1000),
   }
   EOF

   sudo trafgen -i trafgen.cfg -b3000MB -o veth1 --cpp

Fixes: 4ff32036 ("igc: Add support for XDP_REDIRECT action")
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Helper i40e_is_fw_ver_eq() compares incorrectly given firmware version
as it returns true when the major version of running firmware is
greater than the given major version that is wrong and results in
failure during getting of DCB configuration where this helper is used.
Fix the check and return true only if the running FW version is exactly
equals to the given version.

Reproducer:
1. Load i40e driver
2. Check dmesg output

[root@host ~]# modprobe i40e
[root@host ~]# dmesg | grep 'i40e.*DCB'
[   74.750642] i40e 0000:02:00.0: Query for DCB configuration failed, err -EIO aq_err I40E_AQ_RC_EINVAL
[   74.759770] i40e 0000:02:00.0: DCB init failed -5, disabled
[   74.966550] i40e 0000:02:00.1: Query for DCB configuration failed, err -EIO aq_err I40E_AQ_RC_EINVAL
[   74.975683] i40e 0000:02:00.1: DCB init failed -5, disabled

Fixes: cf488e13 ("i40e: Add other helpers to check version of running firmware and AQ API")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Fix an obviously incorrect assignment, created with a typo or cut-n-paste
error.

Fixes: 5995ef88 ("ice: realloc VSI stats arrays")
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The pf->dplls.lock mutex is initialized too late, after its first use.
Move it to the top of ice_dpll_init.
Note that the "err_exit" error path destroys the mutex. And the mutex is
the last thing destroyed in ice_dpll_deinit.
This fixes the following warning with CONFIG_DEBUG_MUTEXES:

 ice 0000:10:00.0: The DDP package was successfully loaded: ICE OS Default Package version 1.3.36.0
 ice 0000:10:00.0: 252.048 Gb/s available PCIe bandwidth (16.0 GT/s PCIe x16 link)
 ice 0000:10:00.0: PTP init successful
 ------------[ cut here ]------------
 DEBUG_LOCKS_WARN_ON(lock->magic != lock)
 WARNING: CPU: 0 PID: 410 at kernel/locking/mutex.c:587 __mutex_lock+0x773/0xd40
 Modules linked in: crct10dif_pclmul crc32_pclmul crc32c_intel polyval_clmulni polyval_generic ice(+) nvme nvme_c>
 CPU: 0 PID: 410 Comm: kworker/0:4 Not tainted 6.8.0-rc5+ #3
 Hardware name: HPE ProLiant DL110 Gen10 Plus/ProLiant DL110 Gen10 Plus, BIOS U56 10/19/2023
 Workqueue: events work_for_cpu_fn
 RIP: 0010:__mutex_lock+0x773/0xd40
 Code: c0 0f 84 1d f9 ff ff 44 8b 35 0d 9c 69 01 45 85 f6 0f 85 0d f9 ff ff 48 c7 c6 12 a2 a9 85 48 c7 c7 12 f1 a>
 RSP: 0018:ff7eb1a3417a7ae0 EFLAGS: 00010286
 RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000
 RDX: 0000000000000002 RSI: ffffffff85ac2bff RDI: 00000000ffffffff
 RBP: ff7eb1a3417a7b80 R08: 0000000000000000 R09: 00000000ffffbfff
 R10: ff7eb1a3417a7978 R11: ff32b80f7fd2e568 R12: 0000000000000000
 R13: 0000000000000000 R14: 0000000000000000 R15: ff32b7f02c50e0d8
 FS:  0000000000000000(0000) GS:ff32b80efe800000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 000055b5852cc000 CR3: 000000003c43a004 CR4: 0000000000771ef0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 PKRU: 55555554
 Call Trace:
  <TASK>
  ? __warn+0x84/0x170
  ? __mutex_lock+0x773/0xd40
  ? report_bug+0x1c7/0x1d0
  ? prb_read_valid+0x1b/0x30
  ? handle_bug+0x42/0x70
  ? exc_invalid_op+0x18/0x70
  ? asm_exc_invalid_op+0x1a/0x20
  ? __mutex_lock+0x773/0xd40
  ? rcu_is_watching+0x11/0x50
  ? __kmalloc_node_track_caller+0x346/0x490
  ? ice_dpll_lock_status_get+0x28/0x50 [ice]
  ? __pfx_ice_dpll_lock_status_get+0x10/0x10 [ice]
  ? ice_dpll_lock_status_get+0x28/0x50 [ice]
  ice_dpll_lock_status_get+0x28/0x50 [ice]
  dpll_device_get_one+0x14f/0x2e0
  dpll_device_event_send+0x7d/0x150
  dpll_device_register+0x124/0x180
  ice_dpll_init_dpll+0x7b/0xd0 [ice]
  ice_dpll_init+0x224/0xa40 [ice]
  ? _dev_info+0x70/0x90
  ice_load+0x468/0x690 [ice]
  ice_probe+0x75b/0xa10 [ice]
  ? _raw_spin_unlock_irqrestore+0x4f/0x80
  ? process_one_work+0x1a3/0x500
  local_pci_probe+0x47/0xa0
  work_for_cpu_fn+0x17/0x30
  process_one_work+0x20d/0x500
  worker_thread+0x1df/0x3e0
  ? __pfx_worker_thread+0x10/0x10
  kthread+0x103/0x140
  ? __pfx_kthread+0x10/0x10
  ret_from_fork+0x31/0x50
  ? __pfx_kthread+0x10/0x10
  ret_from_fork_asm+0x1b/0x30
  </TASK>
 irq event stamp: 125197
 hardirqs last  enabled at (125197): [<ffffffff8416409d>] finish_task_switch.isra.0+0x12d/0x3d0
 hardirqs last disabled at (125196): [<ffffffff85134044>] __schedule+0xea4/0x19f0
 softirqs last  enabled at (105334): [<ffffffff84e1e65a>] napi_get_frags_check+0x1a/0x60
 softirqs last disabled at (105332): [<ffffffff84e1e65a>] napi_get_frags_check+0x1a/0x60
 ---[ end trace 0000000000000000 ]---

Fixes: d7999f5e ("ice: implement dpll interface to control cgu")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The function ice_bridge_setlink() may encounter a NULL pointer dereference
if nlmsg_find_attr() returns NULL and br_spec is dereferenced subsequently
in nla_for_each_nested(). To address this issue, add a check to ensure that
br_spec is not NULL before proceeding with the nested attribute iteration.

Fixes: b1edc14a ("ice: Implement ice_bridge_getlink and ice_bridge_setlink")
Signed-off-by: Rand Deeb <rand.sec96@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The E800 series hardware uses the same iAVF driver as older devices,
including the virtchnl negotiation scheme.

This negotiation scheme includes a mechanism to determine what type of RSS
should be supported, including RSS over PF virtchnl messages, RSS over
firmware AdminQ messages, and RSS via direct register access.

The PF driver will always prefer VIRTCHNL_VF_OFFLOAD_RSS_PF if its
supported by the VF driver. However, if an older VF driver is loaded, it
may request only VIRTCHNL_VF_OFFLOAD_RSS_REG or VIRTCHNL_VF_OFFLOAD_RSS_AQ.

The ice driver happily agrees to support these methods. Unfortunately, the
underlying hardware does not support these mechanisms. The E800 series VFs
don't have the appropriate registers for RSS_REG. The mailbox queue used by
VFs for VF to PF communication blocks messages which do not have the
VF-to-PF opcode.

Stop lying to the VF that it could support RSS over AdminQ or registers, as
these interfaces do not work when the hardware is operating on an E800
series device.

In practice this is unlikely to be hit by any normal user. The iAVF driver
has supported RSS over PF virtchnl commands since 2016, and always defaults
to using RSS_PF if possible.

In principle, nothing actually stops the existing VF from attempting to
access the registers or send an AQ command. However a properly coded VF
will check the capability flags and will report a more useful error if it
detects a case where the driver does not support the RSS offloads that it
does.

Fixes: 1071a835 ("ice: Implement virtchnl commands for AVF support")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Alan Brady <alan.brady@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Fix softirq's not being handled during napi_schedule() call when
receiving marker packets for queue disable by disabling local bottom
half.

The issue can be seen on ifdown:
NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!

Using ftrace to catch the failing scenario:
ifconfig   [003] d.... 22739.830624: softirq_raise: vec=3 [action=NET_RX]
<idle>-0   [003] ..s.. 22739.831357: softirq_entry: vec=3 [action=NET_RX]

No interrupt and CPU is idle.

After the patch when disabling local BH before calling napi_schedule:
ifconfig   [003] d.... 22993.928336: softirq_raise: vec=3 [action=NET_RX]
ifconfig   [003] ..s1. 22993.928337: softirq_entry: vec=3 [action=NET_RX]

Fixes: c2d548ca ("idpf: add TX splitq napi poll support")
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Alan Brady <alan.brady@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Saeed Mahameed says:

====================
mlx5 fixes 2024-03-01

This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.

* tag 'mlx5-fixes-2024-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5e: Switch to using _bh variant of of spinlock API in port timestamping NAPI poll context
  net/mlx5e: Use a memory barrier to enforce PTP WQ xmit submission tracking occurs after populating the metadata_map
  net/mlx5e: Fix MACsec state loss upon state update in offload path
  net/mlx5e: Change the warning when ignore_flow_level is not supported
  net/mlx5: Check capability for fw_reset
  net/mlx5: Fix fw reporter diagnose output
  net/mlx5: E-switch, Change flow rule destination checking
  Revert "net/mlx5e: Check the number of elements before walk TC rhashtable"
  Revert "net/mlx5: Block entering switchdev mode with ns inconsistency"
====================

Link: https://lore.kernel.org/r/20240302070318.62997-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2024-03-01 (ixgbe, i40e, ice)

This series contains updates to ixgbe, i40e, and ice drivers.

Maciej corrects disable flow for ixgbe, i40e, and ice drivers which could
cause non-functional interface with AF_XDP.

Michal restores host configuration when changing MSI-X count for VFs on
ice driver.

* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ice: reconfig host after changing MSI-X on VF
  ice: reorder disabling IRQ and NAPI in ice_qp_dis
  i40e: disable NAPI right after disabling irqs when handling xsk_pool
  ixgbe: {dis, en}able irqs in ixgbe_txrx_ring_{dis, en}able
====================

Link: https://lore.kernel.org/r/20240301192549.2993798-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Based on the static analyzis of the code it looks like when an entry
from the MAC table was removed, the entry was still used after being
freed. More precise the vid of the mac_entry was used after calling
devm_kfree on the mac_entry.
The fix consists in first using the vid of the mac_entry to delete the
entry from the HW and after that to free it.

Fixes: b37a1bae ("net: sparx5: add mactable support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240301080608.3053468-1-horatiu.vultur@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Matthieu Baerts says:

====================
selftests: mptcp: fixes for diag.sh

Here are two patches fixing issues in MPTCP diag.sh kselftest:

- Patch 1 makes sure the exit code is '1' in case of error, and not the
  test ID, not to return an exit code that would be wrongly interpreted
  by the ksefltests framework, e.g. '4' means 'skip'.

- Patch 2 avoids waiting for unnecessary conditions, which can cause
  timeouts in some very slow environments.
====================
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>

When creating a lot of listener sockets, it is enough to wait only for
the last one, like we are doing before in diag.sh for other subtests.

If we do a check for each listener sockets, each time listing all
available sockets, it can take a very long time in very slow
environments, at the point we can reach some timeout.

When using the debug kconfig, the waiting time switches from more than
8 sec to 0.1 sec on my side. In slow/busy environments, and with a poll
timeout set to 30 ms, the waiting time could go up to ~100 sec because
the listener socket would timeout and stop, while the script would still
be checking one by one if all sockets are ready. The result is that
after having waited for everything to be ready, all sockets have been
stopped due to a timeout, and it is too late for the script to check how
many there were.

While at it, also removed ss options we don't need: we only need the
filtering options, to count how many listener sockets have been created.
We don't need to ask ss to display internal TCP information, and the
memory if the output is dropped by the 'wc -l' command anyway.

Fixes: b4b51d36 ("selftests: mptcp: explicitly trigger the listener diag code-path")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/r/20240301063754.2ecefecf@kernel.orgSigned-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The test counter 'test_cnt' should not be returned in diag.sh, e.g. what
if only the 4th test fail? Will do 'exit 4' which is 'exit ${KSFT_SKIP}',
the whole test will be marked as skipped instead of 'failed'!

So we should do ret=${KSFT_FAIL} instead.

Fixes: df62f2ec ("selftests/mptcp: add diag interface tests")
Cc: stable@vger.kernel.org
Fixes: 42fb6cdd ("selftests: mptcp: more stable diag tests")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

If message fills up we need to stop writing. 'break' will
only get us out of the iteration over pools of a single
netdev, we need to also stop walking netdevs.

This results in either infinite dump, or missing pools,
depending on whether message full happens on the last
netdev (infinite dump) or non-last (missing pools).

Fixes: 950ab53b ("net: page_pool: implement GET in the netlink API")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzbot triggered a bug in geneve_rx() [1]

Issue is similar to the one I fixed in commit 8d975c15
("ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()")

We have to save skb->network_header in a temporary variable
in order to be able to recompute the network_header pointer
after a pskb_inet_may_pull() call.

pskb_inet_may_pull() makes sure the needed headers are in skb->head.

[1]
BUG: KMSAN: uninit-value in IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline]
 BUG: KMSAN: uninit-value in geneve_rx drivers/net/geneve.c:279 [inline]
 BUG: KMSAN: uninit-value in geneve_udp_encap_recv+0x36f9/0x3c10 drivers/net/geneve.c:391
  IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline]
  geneve_rx drivers/net/geneve.c:279 [inline]
  geneve_udp_encap_recv+0x36f9/0x3c10 drivers/net/geneve.c:391
  udp_queue_rcv_one_skb+0x1d39/0x1f20 net/ipv4/udp.c:2108
  udp_queue_rcv_skb+0x6ae/0x6e0 net/ipv4/udp.c:2186
  udp_unicast_rcv_skb+0x184/0x4b0 net/ipv4/udp.c:2346
  __udp4_lib_rcv+0x1c6b/0x3010 net/ipv4/udp.c:2422
  udp_rcv+0x7d/0xa0 net/ipv4/udp.c:2604
  ip_protocol_deliver_rcu+0x264/0x1300 net/ipv4/ip_input.c:205
  ip_local_deliver_finish+0x2b8/0x440 net/ipv4/ip_input.c:233
  NF_HOOK include/linux/netfilter.h:314 [inline]
  ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254
  dst_input include/net/dst.h:461 [inline]
  ip_rcv_finish net/ipv4/ip_input.c:449 [inline]
  NF_HOOK include/linux/netfilter.h:314 [inline]
  ip_rcv+0x46f/0x760 net/ipv4/ip_input.c:569
  __netif_receive_skb_one_core net/core/dev.c:5534 [inline]
  __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5648
  process_backlog+0x480/0x8b0 net/core/dev.c:5976
  __napi_poll+0xe3/0x980 net/core/dev.c:6576
  napi_poll net/core/dev.c:6645 [inline]
  net_rx_action+0x8b8/0x1870 net/core/dev.c:6778
  __do_softirq+0x1b7/0x7c5 kernel/softirq.c:553
  do_softirq+0x9a/0xf0 kernel/softirq.c:454
  __local_bh_enable_ip+0x9b/0xa0 kernel/softirq.c:381
  local_bh_enable include/linux/bottom_half.h:33 [inline]
  rcu_read_unlock_bh include/linux/rcupdate.h:820 [inline]
  __dev_queue_xmit+0x2768/0x51c0 net/core/dev.c:4378
  dev_queue_xmit include/linux/netdevice.h:3171 [inline]
  packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276
  packet_snd net/packet/af_packet.c:3081 [inline]
  packet_sendmsg+0x8aef/0x9f10 net/packet/af_packet.c:3113
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg net/socket.c:745 [inline]
  __sys_sendto+0x735/0xa10 net/socket.c:2191
  __do_sys_sendto net/socket.c:2203 [inline]
  __se_sys_sendto net/socket.c:2199 [inline]
  __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Uninit was created at:
  slab_post_alloc_hook mm/slub.c:3819 [inline]
  slab_alloc_node mm/slub.c:3860 [inline]
  kmem_cache_alloc_node+0x5cb/0xbc0 mm/slub.c:3903
  kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560
  __alloc_skb+0x352/0x790 net/core/skbuff.c:651
  alloc_skb include/linux/skbuff.h:1296 [inline]
  alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6394
  sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2783
  packet_alloc_skb net/packet/af_packet.c:2930 [inline]
  packet_snd net/packet/af_packet.c:3024 [inline]
  packet_sendmsg+0x70c2/0x9f10 net/packet/af_packet.c:3113
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg net/socket.c:745 [inline]
  __sys_sendto+0x735/0xa10 net/socket.c:2191
  __do_sys_sendto net/socket.c:2203 [inline]
  __se_sys_sendto net/socket.c:2199 [inline]
  __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Fixes: 2d07dc79 ("geneve: add initial netdev driver for GENEVE tunnels")
Reported-and-tested-by: syzbot+6a1423ff3f97159aae64@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I'm updating __assign_str() and will be removing the second parameter. To
make sure that it does not break anything, I make sure that it matches the
__string() field, as that is where the string is actually going to be
saved in. To make sure there's nothing that breaks, I added a WARN_ON() to
make sure that what was used in __string() is the same that is used in
__assign_str().

In doing this change, an error was triggered as __assign_str() now expects
the string passed in to be a char * value. I instead had the following
warning:

include/trace/events/qdisc.h: In function ‘trace_event_raw_event_qdisc_reset’:
include/trace/events/qdisc.h:91:35: error: passing argument 1 of 'strcmp' from incompatible pointer type [-Werror=incompatible-pointer-types]
   91 |                 __assign_str(dev, qdisc_dev(q));

That's because the qdisc_enqueue() and qdisc_reset() pass in qdisc_dev(q)
to __assign_str() and to __string(). But that function returns a pointer
to struct net_device and not a string.

It appears that these events are just saving the pointer as a string and
then reading it as a string as well.

Use qdisc_dev(q)->name to save the device instead.

Fixes: a34dac0b ("net_sched: add tracepoints for qdisc_reset() and qdisc_destroy()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The NAPI poll context is a softirq context. Do not use normal spinlock API
in this context to prevent concurrency issues.

Fixes: 3178308a ("net/mlx5e: Make tx_port_ts logic resilient to out-of-order CQEs")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
CC: Vadim Fedorenko <vadfed@meta.com>

net/mlx5e: Use a memory barrier to enforce PTP WQ xmit submission tracking occurs after populating the metadata_map

Just simply reordering the functions mlx5e_ptp_metadata_map_put and
mlx5e_ptpsq_track_metadata in the mlx5e_txwqe_complete context is not good
enough since both the compiler and CPU are free to reorder these two
functions. If reordering does occur, the issue that was supposedly fixed by
7e3f3ba9 ("net/mlx5e: Track xmit submission to PTP WQ after populating
metadata map") will be seen. This will lead to NULL pointer dereferences in
mlx5e_ptpsq_mark_ts_cqes_undelivered in the NAPI polling context due to the
tracking list being populated before the metadata map.

Fixes: 7e3f3ba9 ("net/mlx5e: Track xmit submission to PTP WQ after populating metadata map")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
CC: Vadim Fedorenko <vadfed@meta.com>

The packet number attribute of the SA is incremented by the device rather
than the software stack when enabling hardware offload. Because the packet
number attribute is managed by the hardware, the software has no insight
into the value of the packet number attribute actually written by the
device.

Previously when MACsec offload was enabled, the hardware object for
handling the offload was destroyed when the SA was disabled. Re-enabling
the SA would lead to a new hardware object being instantiated. This new
hardware object would not have any recollection of the correct packet
number for the SA. Instead, destroy the flow steering rule when
deactivating the SA and recreate it upon reactivation, preserving the
original hardware object.

Fixes: 8ff0ac5b ("net/mlx5: Add MACsec offload Tx command support")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Downgrade the print from mlx5_core_warn() to mlx5_core_dbg(), as it
is just a statement of fact that firmware doesn't support ignore flow
level.

And change the wording to "firmware flow level support is missing", to
make it more accurate.

Fixes: ae2ee3be ("net/mlx5: CT: Remove warning of ignore_flow_level support for VFs")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Suggested-by: Elliott, Robert (Servers) <elliott@hpe.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Functions which can't access MFRL (Management Firmware Reset Level)
register, have no use of fw_reset structures or events. Remove fw_reset
structures allocation and registration for fw reset events notifications
for these functions.

Having the devlink param enable_remote_dev_reset on functions that don't
have this capability is misleading as these functions are not allowed to
influence the reset flow. Hence, this patch removes this parameter for
such functions.

In addition, return not supported on devlink reload action fw_activate
for these functions.

Fixes: 38b9f903 ("net/mlx5: Handle sync reset request event")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Restore fw reporter diagnose to print the syndrome even if it is zero.
Following the cited commit, in this case (syndrome == 0) command returns no
output at all.

This fix restores command output in case syndrome is cleared:
$ devlink health diagnose pci/0000:82:00.0 reporter fw
    Syndrome: 0

Fixes: d17f98bf ("net/mlx5: devlink health: use retained error fmsg API")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The checking in the cited commit is not accurate. In the common case,
VF destination is internal, and uplink destination is external.
However, uplink destination with packet reformat is considered as
internal because firmware uses LB+hairpin to support it. Update the
checking so header rewrite rules with both internal and external
destinations are not allowed.

Fixes: e0e22d59 ("net/mlx5: E-switch, Add checking for flow rule destinations")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

This reverts commit 4e25b661.

This Commit was mistakenly applied by pulling the wrong tag, remove it.

Fixes: 4e25b661 ("net/mlx5e: Check the number of elements before walk TC rhashtable")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

This reverts commit 662404b2.
The revert is required due to the suspicion it is not good for anything
and cause crash.

Fixes: 662404b2 ("net/mlx5e: Block entering switchdev mode with ns inconsistency")
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

During VSI reconfiguration filters and VSI config which is set in
ice_vf_init_host_cfg() are lost. Recall the host configuration function
to restore them.

Without this config VF on which MSI-X amount was changed might had a
connection problems.

Fixes: 4d38cb44 ("ice: manage VFs MSI-X using resource tracking")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice_qp_dis() currently does things in very mixed way. Tx is stopped
before disabling IRQ on related queue vector, then it takes care of
disabling Rx and finally NAPI is disabled.

Let us start with disabling IRQs in the first place followed by turning
off NAPI. Then it is safe to handle queues.

One subtle change on top of that is that even though ice_qp_ena() looks
more sane, clear ICE_CFG_BUSY as the last thing there.

Fixes: 2d4238f5 ("ice: Add support for AF_XDP")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Disable NAPI before shutting down queues that this particular NAPI
contains so that the order of actions in i40e_queue_pair_disable()
mirrors what we do in i40e_queue_pair_enable().

Fixes: 123cecd4 ("i40e: added queue pair disable/enable functions")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Currently routines that are supposed to toggle state of ring pair do not
take care of associated interrupt with queue vector that these rings
belong to. This causes funky issues such as dead interface due to irq
misconfiguration, as per Pavel's report from Closes: tag.

Add a function responsible for disabling single IRQ in EIMC register and
call this as a very first thing when disabling ring pair during xsk_pool
setup. For enable let's reuse ixgbe_irq_enable_queues(). Besides this,
disable/enable NAPI as first/last thing when dealing with closing or
opening ring pair that xsk_pool is being configured on.
Reported-by: Pavel Vazharov <pavel@x3me.net>
Closes: https://lore.kernel.org/netdev/CAJEV1ijxNyPTwASJER1bcZzS9nMoZJqfR86nu_3jFFVXzZQ4NA@mail.gmail.com/
Fixes: 024aa580 ("ixgbe: added Rx/Tx ring disable/enable functions")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Add myself as co-maintainer for Socionext netsec driver.
This commit also removes Jassi from maintainer since he
no longer has a Developerbox.

Cc: Jassi Brar <jaswinder.singh@linaro.org>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Masahisa Kojima <kojima.masahisa@socionext.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is now possible to disable BQL, but that causes the cpsw driver to break:

drivers/net/ethernet/ti/am65-cpsw-nuss.c:297:28: error: no member named 'dql' in 'struct netdev_queue'
  297 |                    dql_avail(&netif_txq->dql),

There is already a helper function in net/sch_generic.h that could
be used to help here. Move its implementation into the common
linux/netdevice.h along with the other bql interfaces and change
both users over to the new interface.

Fixes: ea7f3cfa ("net: bql: allow the config to be disabled")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Current driver has some asymmetry in the runtime PM calls. On lan78xx_open()
it will call usb_autopm_get() and unconditionally usb_autopm_put(). And
on lan78xx_stop() it will call only usb_autopm_put(). So far, it was
working only because this driver do not activate autosuspend by default,
so it was visible only by warning "Runtime PM usage count underflow!".

Since, with current driver, we can't use runtime PM with active link,
execute lan78xx_open()->usb_autopm_put() only in error case. Otherwise,
keep ref counting high as long as interface is open.

Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The internal delay properties are not mandatory and should have a
documented default value. The device only supports either no delay or a
fixed delay and the device reset default is no delay, document the
default as no delay.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bluetooth, WiFi and netfilter.

  We have one outstanding issue with the stmmac driver, which may be a
  LOCKDEP false positive, not a blocker.

  Current release - regressions:

   - netfilter: nf_tables: re-allow NFPROTO_INET in
     nft_(match/target)_validate()

   - eth: ionic: fix error handling in PCI reset code

  Current release - new code bugs:

   - eth: stmmac: complete meta data only when enabled, fix null-deref

   - kunit: fix again checksum tests on big endian CPUs

  Previous releases - regressions:

   - veth: try harder when allocating queue memory

   - Bluetooth:
      - hci_bcm4377: do not mark valid bd_addr as invalid
      - hci_event: fix handling of HCI_EV_IO_CAPA_REQUEST

  Previous releases - always broken:

   - info leak in __skb_datagram_iter() on netlink socket

   - mptcp:
      - map v4 address to v6 when destroying subflow
      - fix potential wake-up event loss due to sndbuf auto-tuning
      - fix double-free on socket dismantle

   - wifi: nl80211: reject iftype change with mesh ID change

   - fix small out-of-bound read when validating netlink be16/32 types

   - rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back

   - ipv6: fix potential "struct net" ref-leak in inet6_rtm_getaddr()

   - ip_tunnel: prevent perpetual headroom growth with huge number of
     tunnels on top of each other

   - mctp: fix skb leaks on error paths of mctp_local_output()

   - eth: ice: fixes for DPLL state reporting

   - dpll: rely on rcu for netdev_dpll_pin() to prevent UaF

   - eth: dpaa: accept phy-interface-type = '10gbase-r' in the device
     tree"

* tag 'net-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
  dpll: fix build failure due to rcu_dereference_check() on unknown type
  kunit: Fix again checksum tests on big endian CPUs
  tls: fix use-after-free on failed backlog decryption
  tls: separate no-async decryption request handling from async
  tls: fix peeking with sync+async decryption
  tls: decrement decrypt_pending if no async completion will be called
  gtp: fix use-after-free and null-ptr-deref in gtp_newlink()
  net: hsr: Use correct offset for HSR TLV values in supervisory HSR frames
  igb: extend PTP timestamp adjustments to i211
  rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
  tools: ynl: fix handling of multiple mcast groups
  selftests: netfilter: add bridge conntrack + multicast test case
  netfilter: bridge: confirm multicast packets before passing them up the stack
  netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
  Bluetooth: qca: Fix triggering coredump implementation
  Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT
  Bluetooth: qca: Fix wrong event type for patch config command
  Bluetooth: Enforce validation on max value of connection interval
  Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
  Bluetooth: mgmt: Fix limited discoverable off timeout
  ...