- 07 Jul, 2022 2 commits
-
-
Vikash Garodia authored
VP8 codec is deprecated for sc7280 SOC. Fix in platform layer to update the supported codecs accordingly. Signed-off-by:
Vikash Garodia <quic_vgarodia@quicinc.com> Acked-by:
Stanimir Varbanov <stanimir.varbanov@linaro.org> Tested-by: Fritz Koenig<frkoenig@chromium.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org>
-
Dikshita Agarwal authored
Here we introduce a new fault injection for SSR trigger. To trigger the SSR: echo 100 > /sys/kernel/debug/venus/fail_ssr/probability echo 1 > /sys/kernel/debug/venus/fail_ssr/times Co-developed-by:
Dikshita Agarwal <quic_dikshita@quicinc.com> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
-
- 05 Jul, 2022 1 commit
-
-
Randy Dunlap authored
Fix build error when VIDEO_ISL7998X=y and V4L2_FWNODE=m by selecting V4L2_FWNODE. microblaze-linux-ld: drivers/media/i2c/isl7998x.o: in function `isl7998x_probe': (.text+0x8f4): undefined reference to `v4l2_fwnode_endpoint_parse' Cc: stable@vger.kernel.org # 5.18 and above Fixes: 51ef2be5 ("media: i2c: isl7998x: Add driver for Intersil ISL7998x") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
kernel test robot <lkp@intel.com> Cc: Marek Vasut <marex@denx.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Reviewed-by:
Michael Tretter <m.tretter@pengutronix.de> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
- 27 Jun, 2022 37 commits
-
-
Hirokazu Honda authored
The media driver supports constant bitrate mode only. The supported rate control mode is reported through querymenu() and s_ctrl() fails if non constant bitrate mode (e.g. VBR) is requested. Signed-off-by:
Hirokazu Honda <hiroh@chromium.org> Reviewed-by:
Irui Wang <irui.wang@mediatek.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Jiang Jian authored
file: ./drivers/staging/media/av7110/av7110.c line: 2367 * reset with with MASK_31 to MC1 changed to * reset with MASK_31 to MC1 Signed-off-by:Jiang Jian <jiangjian@cdjrlc.com> Signed-off-by:
-
Jiang Jian authored
file: drivers/media/pci/saa7164/saa7164-api.c line: 804 /* Assumption: Hauppauge eeprom is at 0xa0 on on bus 0 */ changed to /* Assumption: Hauppauge eeprom is at 0xa0 on bus 0 */ Signed-off-by:
-
Yunfei Dong authored
According to subdev_bitmap bit value to open hardware power, need to set subdev_bitmap value for non subdev architecture. Fixes: c05bada3 ("media: mtk-vcodec: Add to support multi hardware decode") Signed-off-by:
Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by:
Chen-Yu Tsai <wenst@chromium.org> Tested-by:
-
Jiang Jian authored
Consider "*" alignment in comments Signed-off-by:
-
Miaoqian Lin authored
video_device_alloc() allocates memory for vdev, when video_register_device() fails, it doesn't release the memory and leads to memory leak, call video_device_release() to fix this. Fixes: 704a84cc ("[media] media: Support Intersil/Techwell TW686x-based video capture cards") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Signed-off-by:
-
Jian Zhang authored
In function mxc_jpeg_probe(), when devm_clk_get() fail, the return value will be unexpected, and it should be the devm_clk_get's error code. Fixes: 4c2e5156 ("media: imx-jpeg: Add pm-runtime support for imx-jpeg") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Jian Zhang <zhangjian210@huawei.com> Signed-off-by:
-
Yunfei Dong authored
I have been working on mediatek driver development for a very long time, and sent many patches to change the driver architecture. Add myself as co-maintainer for mediatek vcodec driver. Signed-off-by:
-
Chen-Yu Tsai authored
The stateless decoder API does not specify the usage of SOURCE_CHANGE and EOF events. These events are used by stateful decoders to signal changes in the bitstream. They do not make sense for stateless decoders. Do not handle subscription for these two types of events for stateless decoder instances. This fixes the last v4l2-compliance error: Control ioctls: fail: v4l2-test-controls.cpp(946): have_source_change || have_eos test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL Fixes: 8cdc3794 ("media: mtk-vcodec: vdec: support stateless API") Signed-off-by:
Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by:
-
Christophe JAILLET authored
The commit in Fixes: is incomplete. It has moved some code in the probe but not all error handling paths have been updated. Now, if request_irq() fails, we must release some resources. Fixes: c8946454ed96 ("media: tw686x: Register the irq at the end of probe") Signed-off-by:Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Marek Vasut authored
The second argument is always NULL, stop passing it to the function. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Alain Volmat <alain.volmat@foss.st.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Amelie DELAUNAY <amelie.delaunay@foss.st.com> Cc: Hugues FRUCHET <hugues.fruchet@foss.st.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Philippe CORNU <philippe.cornu@foss.st.com> Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-arm-kernel@lists.infradead.org Signed-off-by:
-
Marek Vasut authored
Fill in 10, 12, 14 bit Bayer formats into the DCMI driver. Those are useful e.g. when MT9P006 sensor is connected. Signed-off-by:
-
Yunfei Dong authored
Need to get dec_capability from scp first, then initialize decoder supported format and other parameters according to dec_capability value. Fixes: fd00d903 ("media: mtk-vcodec: vdec: move stateful ops into their own file") Signed-off-by:
-
Zhang Zekun authored
As dma_alloc_coherent() will return a zeroed buffer, we don't need to memset the returned buffer. priv_tbl = dma_alloc_coherent() and count_tbl = dma_alloc_coherent() should be enough. -see commit 750afb08 ("cross-tree: phase out dma_zalloc_coherent()") Signed-off-by:
Zhang Zekun <zhangzekun11@huawei.com> Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Eugen Hristev authored
When attempting to change the white balance (WB) ctrls before starting streaming, e.g.: # v4l2-ctl -L User Controls .. blue_component_gain 0x009819c1 (int) : min=0 max=8191 step=1 default=512 value=512 flags=slider .. # v4l2-ctl --set-ctrl=blue_component_gain=500 # v4l2-ctl -L .. blue_component_gain 0x009819c1 (int) : min=0 max=8191 step=1 default=512 value=500 flags=slider .. These will not be written to the internal data struct and will not be written to the WB hardware module. Thus, after starting streaming, they will be reset to default: # v4l2-ctl -L .. blue_component_gain 0x009819c1 (int) : min=0 max=8191 step=1 default=512 value=512 flags=slider .. It does not make much sense to not be able to configure the WB controls at all times. Even if the sensor would not be RAW Bayer (and in this case the WB module is unavailable), the user could configure the ISC itself, as the ISC should not care about the sensor format. Thus, when WB module is available (if the sensor changes format e.g.) it will be already configured as be user's desires. In consequence, remove the check in isc_s_awb_ctrl that will return if ISC does not know the sensor format. Signed-off-by:Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by:
-
Arnd Bergmann authored
This driver does not use the virt_to_bus() function, though it depends on x86 specific fixups in the swiotlb code, which was last rewritten in commit e380a039 ("x86/PCI: sta2x11: use default DMA address translation"). It is possible that the driver still fails to build on some architectures that are missing CONFIG_VIRT_TO_BUS, but it is always set on x86 machines with the STA2X11 platform enabled. More likely though is that it was never meant to depend on CONFIG_VIRT_TO_BUS, and the Kconfig dependency was kept from an out-of-tree version when the driver was originally merged. Fixes: efeb98b4 ("[media] STA2X11 VIP: new V4L2 driver") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Justin Green authored
Modify vb2ops_vdec_buf_prepare to return EINVAL if the size of the plane is less than the size of the image. Currently we just log an error and return 0 anyway, which may cause a buffer overrun bug. Signed-off-by:
Justin Green <greenjustin@chromium.org> Suggested-by:
Andres Calderon Jaramillo <andrescj@chromium.org> Reviewed-by:
-
Ming Qian authored
If the last buffer was dequeued from the capture queue, signal userspace. DQBUF(CAPTURE) will return -EPIPE. But if output queue is empty and capture queue is empty, v4l2_m2m_poll_for_data will return EPOLLERR, This is very easy to happen in drain. When last_buffer_dequeued is set, we shouldn't return EPOLLERR, but return EPOLLIN | EPOLLRDNORM. Fixes: 1698a7f1 ("media: v4l2-mem2mem: simplify poll logic") Signed-off-by:
Ming Qian <ming.qian@nxp.com> Signed-off-by:
-
Yang Li authored
Eliminate the following coccicheck warning: ./drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec.c:71:2-3: Unneeded semicolon Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
-
Niels Dossche authored
Error return values are supposed to be negative in hdpvr_read. Most error returns are currently handled via an unsigned integer "ret". When setting a negative error value to "ret", the value actually becomes a large positive value, because "ret" is unsigned. Later on, the "ret" value is returned. But as ssize_t is a 64-bit signed number, the error return value stays a large positive integer instead of a negative integer. This can cause an error value to be interpreted as the read size, which can cause a buffer overread for applications relying on the returned size. Fixes: 9aba42ef ("V4L/DVB (11096): V4L2 Driver for the Hauppauge HD PVR usb capture device") Signed-off-by:
Niels Dossche <dossche.niels@gmail.com> Signed-off-by:
-
Guo Zhengkui authored
Fix the following coccicheck warning: drivers/media/platform/mediatek/vcodec/vdec/vdec_vp9_req_lat_if.c: 694:15-16: WARNING opportunity for min(). Signed-off-by:
Guo Zhengkui <guozhengkui@vivo.com> Reviewed-by:
-
Lukas Bulwahn authored
Maintainers of the directory Documentation/devicetree/bindings/media are also the maintainers of the corresponding directory include/dt-bindings/media. Add the file entry for include/dt-bindings/media to the appropriate section in MAINTAINERS. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:
-
Christophe JAILLET authored
An SPDX-License-Identifier is already in place. There is no need to duplicate part of the corresponding license. While at it, a few comments at the end of some .h files have been updated to reflect the correct include guard name (missing '_' and co.) Signed-off-by:
-
Christophe JAILLET authored
An SPDX-License-Identifier is already in place. There is no need to duplicate part of the corresponding license. Signed-off-by:
-
Christophe JAILLET authored
An SPDX-License-Identifier is already in place. There is no need to duplicate part of the corresponding license. This is a left-over from commit adeb6970 ("media: rcar_drif: convert to SPDX identifiers") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Ajye Huang authored
The Google Kinox device uses the same approach as the Google Brask which enables the HDMI CEC via the cros-ec-cec driver. Signed-off-by:
Ajye Huang <ajye_huang@compal.corp-partner.google.com> Reviewed-by:
Guenter Roeck <groeck@chromium.org> Signed-off-by:
-
Ming Qian authored
Firmware may send the error event with some error message, and it help locate the firmware error, so output the error message if it exists Fixes: 61cbf1c1 ("media: amphion: implement vpu core communication based on mailbox") Signed-off-by:
-
Ming Qian authored
The interrupt STMBUF_HALF may be triggered after frame done. It may led to system hang if driver try to access the register after power off. Disable the slot interrupt when frame done. Fixes: 2db16c6e ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder") Signed-off-by:
Mirela Rabulea <mirela.rabulea@nxp.com> Tested-by:
-
Yunfei Dong authored
Change the value of v4l2 capability parameters: driver and card. Signed-off-by:
-
Yunfei Dong authored
Fix v4l2 capability bus_info value with correct chip name according to compatible. Signed-off-by:
-
Yunfei Dong authored
Change the value of v4l2 capability parameters: driver and card. Signed-off-by:
-
Yunfei Dong authored
Fix v4l2 capability bus_info value with correct chip name according to compatible. Signed-off-by:
-
Laurent Pinchart authored
Fix a small indentation issue to increase code readability, and drop unneeded parentheses. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Ricardo Ribalda <ribalda@chromium.org> Signed-off-by:
-
Laurent Pinchart authored
Make the code more readable by using the same alignment for all macros in rkisp1-common.h. Signed-off-by:
-
Paul Elder authored
When handling querycap, the capture node would access the main rkisp1 device unnecessarily. Get the information from the most direct source. Signed-off-by:
Paul Elder <paul.elder@ideasonboard.com> Reviewed-by:
Dafna Hirschfeld <dafna@fastmail.com> Reviewed-by:
-
Laurent Pinchart authored
Update the maximum register name length to match all the registers being printed. This helps getting a consistent alignment of register dumps when concatenating multiple debugfs files. Signed-off-by:
-
Laurent Pinchart authored
Extend the rkisp1_debug_register structure and the rkisp1_debug_dump_regs() function to support shadow registers, and replace the manual registers dump implementation in rkisp1_debug_dump_rsz_regs_show() with a call to rkisp1_debug_dump_regs(). Support for printing register values in decimal is dropped, as it was actually confusing to print resizer register expressed as fixed-point values in decimal. Signed-off-by:
-
