- 21 Jun, 2015 40 commits
-
-
Jonas Gorski authored
Add support for detecting a vmlinuz.bin appended dtb and overriding the boot arguments to match the UHI interface. To ensure _edata / __apendend_dtb points to the actual end of the binary, align the data section to 16 bytes instead of the address cursor. Due to ld.script not going through the preprocessor, we can't check for MIPS_ZBOOT_APPENDED_DTB being enabled, so always reserve space for it. It should have no consequences for booting without it enabled except 1 MiB more ram usage during the uncompressing stage. Signed-off-by:
Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: John Crispin <blogic@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: James Hartley <James.Hartley@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/9741/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Jonas Gorski authored
Add support for detecting a vmlinux.bin appended dtb and overriding the boot arguments to match the UHI interface. Due to the PERCPU section being empty for !SMP, but still modifying the current address by aligning it to the page size, do not define it for !SMP builds to allow __appended_dtb to still point to the actual end of the data. Signed-off-by:
-
Rob Herring authored
In preparation to allow users to enable DeviceTree without arch or machine selecting it, we need to fix build errors on MIPS. When CONFIG_OF is enabled, device_tree_init cannot be resolved. This is trivially fixed by using CONFIG_USE_OF instead of CONFIG_OF for prom.h. Signed-off-by:
Rob Herring <robh@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Signed-off-by:
-
Joshua Kinard authored
The R12000 added a new feature to enhance branch prediction called "global history". Per the Vr10000 Series User Manual (U10278EJ4V0UM), Coprocessor 0, Diagnostic Register (22): """ If bit 26 is set, branch prediction uses all eight bits of the global history register. If bit 26 is not set, then bits 25:23 specify a count of the number of bits of global history to be used. Thus if bits 26:23 are all zero, global history is disabled. The global history contains a record of the taken/not-taken status of recently executed branches, and when used is XOR'ed with the PC of a branch being predicted to produce a hashed value for indexing the BPT. Some programs with small "working set of conditional branches" benefit significantly from the use of such hashing, some see slight performance degradation. """ This patch enables global history on R12000 CPUs and up by setting bit 26 in the branch prediction diagnostic register (CP0 $22) to '1'. Bits 25:23 are left alone so that all eight bits of the global history register are available for branch prediction. Signed-off-by:
Joshua Kinard <kumba@gentoo.org> Signed-off-by:
-
Joshua Kinard authored
Inspired by Maciej's recent patch to update DEC cpu-feature-overrides.h, I updated IP27's as well to disable features known to not apply to the IP27 platform or the R10K-series of CPUs. Before: text data bss dec hex filename 8616648 463200 472240 9552088 91c0d8 vmlinux After: text data bss dec hex filename 8592256 471392 472240 9535888 918190 vmlinux I believe the increase in the size of the data section is for the same reasons as in the DEC patch. Signed-off-by:
-
Paul Gortmaker authored
The file looks as if it is non-modular, but it piggy-backs off CONFIG_SERIAL_8250 which is tristate. If set to "=m" we will get this after the init/module header cleanup: arch/mips/loongson/common/serial.c:76:1: error: data definition has no type or storage class [-Werror] arch/mips/loongson/common/serial.c:76:1: error: type defaults to 'int' in declaration of 'device_initcall' [-Werror=implicit-int] arch/mips/loongson/common/serial.c:76:1: error: parameter names (without types) in function declaration [-Werror] arch/mips/loongson/common/serial.c:58:19: error: 'serial_init' defined but not used [-Werror=unused-function] cc1: all warnings being treated as errors make[3]: *** [arch/mips/loongson/common/serial.o] Error 1 Make it clearly modular, and add a module_exit function, so that we avoid the above breakage. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Sergei Shtylyov authored
Commit 854700115ecf ([MIPS] kgdb: add arch support for the kernel's kgdb core) added the 'kgdb_early_setup' flag to avoid calling trap_init() and init_IRQ() the second time, however the code that called these functions earlier, from kgdb_arch_init(), had been already removed by that time, so the flag never served any useful purpose. Remove the related code along with ugly #ifdef'ery at last. [ralf@linux-mips.org: Folded in Guenter Roeck's fix.] Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Patchwork: https://patchwork.linux-mips.org/patch/10501/Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Patchwork: https://patchwork.linux-mips.org/patch/10533/Signed-off-by:
-
Alban Bedel authored
Add a DTS for TL-WR1043ND version 1 and allow to have it built in the kernel to circumvent the broken u-boot found on these boards. Currently only the UART, LEDs and buttons are supported. Signed-off-by:
Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Signed-off-by:
-
Alban Bedel authored
Signed-off-by:
-
Alban Bedel authored
Replace the simple GPIO chip registration by a platform driver and make ath79_gpio_init() just register the device. Signed-off-by:
-
Alban Bedel authored
These bindings support the GPIO controllers found on the Qualcomm Atheros AR7xxx/AR9XXX SoC. Signed-off-by:
-
Alban Bedel authored
Allow using the SoC clocks in the device tree. Signed-off-by:
-
Alban Bedel authored
Signed-off-by:
-
Alban Bedel authored
Add OF support for the CPU and MISC interrupt controllers of most supported ATH79 devices. Signed-off-by:
-
Alban Bedel authored
Signed-off-by:
-
Alban Bedel authored
Signed-off-by:
-
Alban Bedel authored
The DDR controller of the ARxxx and AR9xxx families provides an interface to flush the FIFO between various devices and the DDR. This is mainly used by the IRQ controller to flush the FIFO before running the interrupt handler of such devices. Signed-off-by:
-
Alban Bedel authored
Add the bare minimum to load a device tree. Signed-off-by:
-
Alban Bedel authored
Signed-off-by:
-
Hante Meuleman authored
Host platforms such as routers supported by OpenWrt can support NVRAM reading directly from internal NVRAM store. The brcmfmac for one requires the complete nvram contents to select what needs to be sent to wireless device. Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
Hante Meuleman <meuleman@broadcom.com> Reviewed-by:
Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by:
Daniel (Deognyoun) Kim <dekim@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10093/Signed-off-by:
-
Huacai Chen authored
Currently, code of Loongson-2/3 is under loongson directory and code of Loongson-1 is under loongson1 directory. Besides, there are Kconfig options such as MACH_LOONGSON and MACH_LOONGSON1. This naming style is very ugly and confusing. Since Loongson-2/3 are both 64-bit general- purpose CPU while Loongson-1 is 32-bit SoC, we rename both file names and Kconfig symbols from loongson/loongson1 to loongson64/loongson32. [ralf@linux-mips.org: Resolve a number of simple conflicts.] Signed-off-by:
Huacai Chen <chenhc@lemote.com> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: Kelvin Cheung <keguang.zhang@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/9790/Signed-off-by:
-
James Hogan authored
Enable the 32-bit DMA zone for 64-bit Malta kernels so that devices with 32-bit coherent DMA masks aren't constrained to the low 16MB DMA zone, which can easily be exhausted when there is lots of static kernel data due to lock and RCU debugging. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9890/Signed-off-by:
-
James Hogan authored
Commit c5b36783 ("MIPS: Add support for XPA.") added generation of a shift by _PAGE_PRESENT_SHIFT in build_pte_present() and build_pte_writable(), however except for the XPA case this is always zero making it unnecessary. Make the shift conditional upon _PAGE_PRESENT_SHIFT being non-zero to save an instruction in those cases. Fixes: c5b36783 ("MIPS: Add support for XPA.") Signed-off-by:
-
James Hogan authored
Commit c5b36783 ("MIPS: Add support for XPA.") changed build_pte_present() and build_pte_writable() to assume a constant offset of _PAGE_READ and _PAGE_WRITE relative to _PAGE_PRESENT, however this is no longer true for some MIPS32R2 builds since commit be0c37c9 ("MIPS: Rearrange PTE bits into fixed positions.") which moved the _PAGE_READ PTE bit away from the _PAGE_PRESENT bit, with the _PAGE_WRITE bit falling into its place. Make use of the _PAGE_READ and _PAGE_WRITE definitions to calculate the correct mask to apply instead of hard coding 3 (for _PAGE_PRESENT | _PAGE_READ) or 5 (for _PAGE_PRESENT | _PAGE_WRITE). Fixes: c5b36783 ("MIPS: Add support for XPA.") Signed-off-by:
-
James Hogan authored
KVM guest kernels for trap & emulate run in user mode, with a modified set of kernel memory segments. However the fixmap address is still in the normal KSeg3 region at 0xfffe0000 regardless, causing problems when cache alias handling makes use of them when handling copy on write. Therefore define FIXADDR_TOP as 0x7ffe0000 in the guest kernel mapped region when CONFIG_KVM_GUEST is defined. Signed-off-by:
-
Dan Haab authored
Signed-off-by:
Dan Haab <dhaab@luxul.com> Acked-by:
Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Dan Haab <dhaab@luxul.com> Patchwork: https://patchwork.linux-mips.org/patch/9831/Signed-off-by:
-
Alban Bedel authored
Make the code simpler and open the way for device tree clocks. [ralf@linux-mips.org: Resolved conflict with 2a552da6 (MIPS/IRQCHIP: Move irq_chip from arch/mips to drivers/irqchip.)] Signed-off-by:
-
Alban Bedel authored
The DDR controller need to be used by the IRQ controller to flush the write buffer of some devices before running the IRQ handler. It is also used by the PCI controller to setup the PCI memory windows. The current interface used to access the DDR controller doesn't provides any useful abstraction and simply rely on a shared global pointer. Replace this by a simple API to setup the PCI memory windows and use the write buffer flush independently of the SoC type. That remove the need for the shared global pointer, simplify the IRQ handler code. [ralf@linux-mips.org: Folded in Alban Bedel's follup fix.] Signed-off-by:
-
Alban Bedel authored
This register is named PLL_FB and is not a divider but a multiplier. To make things less confusing rename the ARxxxx_PLL_DIV_SHIFT and ARxxxx_PLL_DIV_MASK macros to ARxxxx_PLL_FB_SHIFT and ARxxxx_PLL_FB_MASK. Signed-off-by:
-
Alban Bedel authored
ZBOOT is working fine, so allow using it. Signed-off-by:
-
Jiang Liu authored
Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc while we already have a pointer to corresponding irq_desc. Signed-off-by:
Jiang Liu <jiang.liu@linux.intel.com> Acked-by:
Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: David Daney <david.daney@cavium.com> Cc: Christoph Lameter <cl@linux.com> Cc: John Crispin <blogic@openwrt.org> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: x86@kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: linux-acpi@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10086/Signed-off-by:
-
Krzysztof Kozlowski authored
Parent names in clock init data is now array of const pointers to const strings so the cast is not needed. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Barry Song <baohua@kernel.org> Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Inki Dae <inki.dae@samsung.com> Patchwork: https://patchwork.linux-mips.org/patch/9903Signed-off-by:
-
Paul Gortmaker authored
We removed __cpuinit support (leaving no-op stubs) quite some time ago. However a new instance was added in commit c5b36783 ("MIPS: Add support for XPA.") Since we want to clobber the stubs soon, get this removed now. Signed-off-by:
-
Paul Gortmaker authored
We removed __cpuinit support (leaving no-op stubs) quite some time ago. However a new instance was added in commit 4caa906e ("MIPS: mm: c-r4k: Build EVA {d,i}cache flushing functions") Since we want to clobber the stubs soon, get this removed now. Signed-off-by:
-
Paul Gortmaker authored
We removed __cpuinit support (leaving no-op stubs) quite some time ago. However a few more crept in as of commit 6ee1d934 ("MIPS: BCM47XX: Detect more then 128 MiB of RAM (HIGHMEM)") Since we want to clobber the stubs soon, get this removed now. Signed-off-by:
-
Paul Gortmaker authored
We removed __cpuinit support (leaving no-op stubs) quite some time ago. However this one crept back in as of commit 43cc739f ("MIPS: ath25: add common parts") Since we want to clobber the stubs soon, get this removed now. Signed-off-by:
-
Andrew Bresticker authored
Update pistachio_defconfig to enable Pistachio's USB PHY driver. Signed-off-by:
Andrew Bresticker <abrestic@chromium.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: James Hartley <james.hartley@imgtec.com> Cc: Damien Horsley <Damien.Horsley@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/9729/Signed-off-by:
-
Andrew Bresticker authored
Add a driver for the USB2.0 PHY found on the IMG Pistachio SoC. Signed-off-by:
-
Andrew Bresticker authored
Add a binding document for the USB2.0 PHY found on the IMG Pistachio SoC. Signed-off-by:
-
Ezequiel Garcia authored
Pistachio SoCs are capable of early printk with generic 8250 support, so let's select the options to enable it. Signed-off-by:
Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Andrew Bresticker <abrestic@chromium.org> Cc: James Hartley <james.hartley@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/9913/Signed-off-by:
-
