- 11 Feb, 2015 31 commits
-
-
Bo Shen authored
commit a43bd7e1 upstream. According to the I2S specification information as following: - WS = 0, channel 1 (left) - WS = 1, channel 2 (right) So, the start event should be TF/RF falling edge. Reported-by:
Songjun Wu <songjun.wu@atmel.com> Signed-off-by:
Bo Shen <voice.shen@atmel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
karl beldan authored
commit 9ce35779 upstream. Fixed commit added from64to32 under _#ifndef do_csum_ but used it under _#ifndef csum_tcpudp_nofold_, breaking some builds (Fengguang's robot reported TILEGX's). Move from64to32 under the latter. Fixes: 150ae0e9 ("lib/checksum.c: fix carry in csum_tcpudp_nofold") Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Karl Beldan <karl.beldan@rivierawaves.com> Cc: Eric Dumazet <edumazet@google.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Mark Rutland authored
commit 44b82b77 upstream. Commit d7a49086 (arm64: cpuinfo: print info for all CPUs) attempted to clean up /proc/cpuinfo, but due to concerns regarding further changes was reverted in commit 5e39977e (Revert "arm64: cpuinfo: print info for all CPUs"). There are two major issues with the arm64 /proc/cpuinfo format currently: * The "Features" line describes (only) the 64-bit hwcaps, which is problematic for some 32-bit applications which attempt to parse it. As the same names are used for analogous ISA features (e.g. aes) despite these generally being architecturally unrelated, it is not possible to simply append the 64-bit and 32-bit hwcaps in a manner that might not be misleading to some applications. Various potential solutions have appeared in vendor kernels. Typically the format of the Features line varies depending on whether the task is 32-bit. * Information is only printed regarding a single CPU. This does not match the ARM format, and does not provide sufficient information in big.LITTLE systems where CPUs are heterogeneous. The CPU information printed is queried from the current CPU's registers, which is racy w.r.t. cross-cpu migration. This patch attempts to solve these issues. The following changes are made: * When a task with a LINUX32 personality attempts to read /proc/cpuinfo, the "Features" line contains the decoded 32-bit hwcaps, as with the arm port. Otherwise, the decoded 64-bit hwcaps are shown. This aligns with the behaviour of COMPAT_UTS_MACHINE and COMPAT_ELF_PLATFORM. In the absense of compat support, the Features line is empty. The set of hwcaps injected into a task's auxval are unaffected. * Properties are printed per-cpu, as with the ARM port. The per-cpu information is queried from pre-recorded cpu information (as used by the sanity checks). * As with the previous attempt at fixing up /proc/cpuinfo, the hardware field is removed. The only users so far are 32-bit applications tied to particular boards, so no portable applications should be affected, and this should prevent future tying to particular boards. The following differences remain: * No model_name is printed, as this cannot be queried from the hardware and cannot be provided in a stable fashion. Use of the CPU {implementor,variant,part,revision} fields is sufficient to identify a CPU and is portable across arm and arm64. * The following system-wide properties are not provided, as they are not possible to provide generally. Programs relying on these are already tied to particular (32-bit only) boards: - Hardware - Revision - Serial No software has yet been identified for which these remaining differences are problematic. Cc: Greg Hackmann <ghackmann@google.com> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: Serban Constantinescu <serban.constantinescu@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: cross-distro@lists.linaro.org Cc: linux-api@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Peter Kümmel authored
commit 2d560306 upstream. Warning: In file included from scripts/kconfig/zconf.tab.c:2537:0: scripts/kconfig/menu.c: In function ‘get_symbol_str’: scripts/kconfig/menu.c:590:18: warning: ‘jump’ may be used uninitialized in this function [-Wmaybe-uninitialized] jump->offset = strlen(r->s); Simplifies the test logic because (head && local) means (jump != 0) and makes GCC happy when checking if the jump pointer was initialized. Signed-off-by:
Peter Kümmel <syntheticpp@gmx.net> Signed-off-by:
Michal Marek <mmarek@suse.cz> Cc: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by:
-
Alex Deucher authored
commit a124d068 upstream. Should be the same as cayman. We don't use VM by default on NI parts so this isn't critical. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Ilija Hadzic authored
commit 92b712b7 upstream. radeon_copy_dma and radeon_copy_blit must be called with a valid reservation object. Otherwise a crash will be provoked. We borrow the object from vram BO. bug: https://bugs.freedesktop.org/show_bug.cgi?id=88464Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Ilija Hadzic <ihadzic@research.bell-labs.com> Signed-off-by:
-
Ilija Hadzic authored
commit 3f5e1b4f upstream. radeon_copy_dma and radeon_copy_blit must be called with a valid reservation object. Otherwise a crash will be provoked. We borrow the object from destination BO. bug: https://bugs.freedesktop.org/show_bug.cgi?id=88464Reviewed-by:
-
Christian König authored
commit 72edd83c upstream. This is a workaround for RS880 and older chips which seem to have an additional limit on the minimum PLL input frequency. v2: fix signed/unsigned warning bugs: https://bugzilla.kernel.org/show_bug.cgi?id=91861 https://bugzilla.kernel.org/show_bug.cgi?id=83461Signed-off-by:
-
Alex Deucher authored
commit 544143f9 upstream. If acceleration is disabled, it does not make sense to init gpuvm since nothing will use it. Moreover, if radeon_vm_init() gets called it uses accel to try and clear the pde tables, etc. which results in a bug. v2: handle vm_fini as well v3: handle bo_open/close as well Bug: https://bugs.freedesktop.org/show_bug.cgi?id=88786Signed-off-by:
-
Ryusuke Konishi authored
commit 7ef3ff2f upstream. Nilfs2 eventually hangs in a stress test with fsstress program. This issue was caused by the following deadlock over I_SYNC flag between nilfs_segctor_thread() and writeback_sb_inodes(): nilfs_segctor_thread() nilfs_segctor_thread_construct() nilfs_segctor_unlock() nilfs_dispose_list() iput() iput_final() evict() inode_wait_for_writeback() * wait for I_SYNC flag writeback_sb_inodes() * set I_SYNC flag on inode->i_state __writeback_single_inode() do_writepages() nilfs_writepages() nilfs_construct_dsync_segment() nilfs_segctor_sync() * wait for completion of segment constructor inode_sync_complete() * clear I_SYNC flag after __writeback_single_inode() completed writeback_sb_inodes() calls do_writepages() for dirty inodes after setting I_SYNC flag on inode->i_state. do_writepages() in turn calls nilfs_writepages(), which can run segment constructor and wait for its completion. On the other hand, segment constructor calls iput(), which can call evict() and wait for the I_SYNC flag on inode_wait_for_writeback(). Since segment constructor doesn't know when I_SYNC will be set, it cannot know whether iput() will block or not unless inode->i_nlink has a non-zero count. We can prevent evict() from being called in iput() by implementing sop->drop_inode(), but it's not preferable to leave inodes with i_nlink == 0 for long periods because it even defers file truncation and inode deallocation. So, this instead resolves the deadlock by calling iput() asynchronously with a workqueue for inodes with i_nlink == 0. Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Al Viro <viro@zeniv.linux.org.uk> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Michal Hocko authored
commit f5e03a49 upstream. It has been reported that 965GM might trigger VM_BUG_ON_PAGE(!lrucare && PageLRU(oldpage), oldpage) in mem_cgroup_migrate when shmem wants to replace a swap cache page because of shmem_should_replace_page (the page is allocated from an inappropriate zone). shmem_replace_page expects that the oldpage is not on LRU list and calls mem_cgroup_migrate without lrucare. This is obviously incorrect because swapcache pages might be on the LRU list (e.g. swapin readahead page). Fix this by enabling lrucare for the migration in shmem_replace_page. Also clarify that lrucare should be used even if one of the pages might be on LRU list. The BUG_ON will trigger only when CONFIG_DEBUG_VM is enabled but even without that the migration code might leave the old page on an inappropriate memcg' LRU which is not that critical because the page would get removed with its last reference but it is still confusing. Fixes: 0a31bc97 ("mm: memcontrol: rewrite uncharge API") Signed-off-by:
Michal Hocko <mhocko@suse.cz> Reported-by:
Chris Wilson <chris@chris-wilson.co.uk> Reported-by:
Dave Airlie <airlied@gmail.com> Acked-by:
Hugh Dickins <hughd@google.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
karl beldan authored
commit 150ae0e9 upstream. The carry from the 64->32bits folding was dropped, e.g with: saddr=0xFFFFFFFF daddr=0xFF0000FF len=0xFFFF proto=0 sum=1, csum_tcpudp_nofold returned 0 instead of 1. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Shiraz Hashim authored
commit 23aaed66 upstream. walk_page_range() silently skips vma having VM_PFNMAP set, which leads to undesirable behaviour at client end (who called walk_page_range). Userspace applications get the wrong data, so the effect is like just confusing users (if the applications just display the data) or sometimes killing the processes (if the applications do something with misunderstanding virtual addresses due to the wrong data.) For example for pagemap_read, when no callbacks are called against VM_PFNMAP vma, pagemap_read may prepare pagemap data for next virtual address range at wrong index. Eventually userspace may get wrong pagemap data for a task. Corresponding to a VM_PFNMAP marked vma region, kernel may report mappings from subsequent vma regions. User space in turn may account more pages (than really are) to the task. In my case I was using procmem, procrack (Android utility) which uses pagemap interface to account RSS pages of a task. Due to this bug it was giving a wrong picture for vmas (with VM_PFNMAP set). Fixes: a9ff785e ("mm/pagewalk.c: walk_page_range should avoid VM_PFNMAP areas") Signed-off-by:
Shiraz Hashim <shashim@codeaurora.org> Acked-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
-
NeilBrown authored
commit b1b02fe9 upstream. If a non-page-aligned write is destined for a device which is missing/faulty, we can deadlock. As the target device is missing, a read-modify-write cycle is not possible. As the write is not for a full-page, a recontruct-write cycle is not possible. This should be handled by logic in fetch_block() which notices there is a non-R5_OVERWRITE write to a missing device, and so loads all blocks. However since commit 67f45548, that code requires STRIPE_PREREAD_ACTIVE before it will active, and those circumstances never set STRIPE_PREREAD_ACTIVE. So: in handle_stripe_dirtying, if neither rmw or rcw was possible, set STRIPE_DELAYED, which will cause STRIPE_PREREAD_ACTIVE be set after a suitable delay. Fixes: 67f45548Reported-by:
Mikulas Patocka <mpatocka@redhat.com> Tested-by:
Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Sachin Prabhu authored
commit ca7df8e0 upstream. Commit c11f1df5 requires writers to wait for any pending oplock break handler to complete before proceeding to write. This is done by waiting on bit CIFS_INODE_PENDING_OPLOCK_BREAK in cifsFileInfo->flags. This bit is cleared by the oplock break handler job queued on the workqueue once it has completed handling the oplock break allowing writers to proceed with writing to the file. While testing, it was noticed that the filehandle could be closed while there is a pending oplock break which results in the oplock break handler on the cifsiod workqueue being cancelled before it has had a chance to execute and clear the CIFS_INODE_PENDING_OPLOCK_BREAK bit. Any subsequent attempt to write to this file hangs waiting for the CIFS_INODE_PENDING_OPLOCK_BREAK bit to be cleared. We fix this by ensuring that we also clear the bit CIFS_INODE_PENDING_OPLOCK_BREAK when we remove the oplock break handler from the workqueue. The bug was found by Red Hat QA while testing using ltp's fsstress command. Signed-off-by:
Sachin Prabhu <sprabhu@redhat.com> Acked-by:
Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by:
Jeff Layton <jlayton@samba.org> Signed-off-by:
Steve French <steve.french@primarydata.com> Signed-off-by:
-
Will Deacon authored
commit 8e648066 upstream. Commit e1a5848e ("ARM: 7924/1: mm: don't bother with reserved ttbr0 when running with LPAE") removed the use of the reserved TTBR0 value for LPAE systems, since the ASID is held in the TTBR and can be updated atomicly with the pgd of the next mm. Unfortunately, this patch forgot to update flush_context, which deliberately avoids marking the local active ASID as allocated, since we used to switch via ASID zero and didn't need to allocate the ASID of the previous mm. The side-effect of this is that we can allocate the same ASID to the next mm and, between flushing the local TLB and updating TTBR0, we can perform speculative TLB fills for userspace nG mappings using the page table of the previous mm. The consequence of this is that the next mm can erroneously hit some mappings of the previous mm. Note that this was made significantly harder to hit by a391263c ("ARM: 8203/1: mm: try to re-use old ASID assignments following a rollover") but is still theoretically possible. This patch fixes the problem by removing the code from flush_context that forces the allocated ASID to zero for the local CPU. Many thanks to the Broadcom guys for tracking this one down. Fixes: e1a5848e ("ARM: 7924/1: mm: don't bother with reserved ttbr0 when running with LPAE") Reported-by:
Raymond Ngun <rngun@broadcom.com> Tested-by:
Gregory Fong <gregory.0xf0@gmail.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
James Hogan authored
commit d76e9b9f upstream. Commit 842dfc11 ("MIPS: Fix build with binutils 2.24.51+") in v3.18 enabled -msoft-float and sprinkled ".set hardfloat" where necessary to use FP instructions. However it missed enable_restore_fp_context() which since v3.17 does a ctc1 with inline assembly, causing the following assembler errors on Mentor's 2014.05 toolchain: {standard input}: Assembler messages: {standard input}:2913: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ctc1 $2,$31' scripts/Makefile.build:257: recipe for target 'arch/mips/kernel/traps.o' failed Fix that to use the new write_32bit_cp1_register() macro so that ".set hardfloat" is automatically added when -msoft-float is in use. Fixes 842dfc11 ("MIPS: Fix build with binutils 2.24.51+") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9173/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
James Hogan authored
commit 5e32033e upstream. Add a write_32bit_cp1_register() macro to compliment the read_32bit_cp1_register() macro. This is to abstract whether .set hardfloat needs to be used based on GAS_HAS_SET_HARDFLOAT. The implementation of _read_32bit_cp1_register() .sets mips1 due to failure of gas v2.19 to assemble cfc1 for Octeon (see commit 25c30003 ("MIPS: Override assembler target architecture for octeon.")). I haven't copied this over to _write_32bit_cp1_register() as I'm uncertain whether it applies to ctc1 too, or whether anybody cares about that version of binutils any longer. Signed-off-by:
-
Hemmo Nieminen authored
commit c7754e75 upstream. As printk() invocation can cause e.g. a TLB miss, printk() cannot be called before the exception handlers have been properly initialized. This can happen e.g. when netconsole has been loaded as a kernel module and the TLB table has been cleared when a CPU was offline. Call cpu_report() in start_secondary() only after the exception handlers have been initialized to fix this. Without the patch the kernel will randomly either lockup or crash after a CPU is onlined and the console driver is a module. Signed-off-by:
Hemmo Nieminen <hemmo.nieminen@iki.fi> Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Cc: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8953/Signed-off-by:
-
Aaro Koskinen authored
commit 63a87fe0 upstream. octeon_cpu_disable() will unconditionally enable interrupts when called. We can assume that the routine is always called with interrupts disabled, so just delete the incorrect local_irq_disable/enable(). The patch fixes the following crash when offlining a CPU: [ 93.818785] ------------[ cut here ]------------ [ 93.823421] WARNING: CPU: 1 PID: 10 at kernel/smp.c:231 flush_smp_call_function_queue+0x1c4/0x1d0() [ 93.836215] Modules linked in: [ 93.839287] CPU: 1 PID: 10 Comm: migration/1 Not tainted 3.19.0-rc4-octeon-los_b5f0 #1 [ 93.847212] Stack : 0000000000000001 ffffffff81b2cf90 0000000000000004 ffffffff81630000 0000000000000000 0000000000000000 0000000000000000 000000000000004a 0000000000000006 ffffffff8117e550 0000000000000000 0000000000000000 ffffffff81b30000 ffffffff81b26808 8000000032c77748 ffffffff81627e07 ffffffff81595ec8 ffffffff81b26808 000000000000000a 0000000000000001 0000000000000001 0000000000000003 0000000010008ce1 ffffffff815030c8 8000000032cbbb38 ffffffff8113d42c 0000000010008ce1 ffffffff8117f36c 8000000032c77300 8000000032cbba50 0000000000000001 ffffffff81503984 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 ffffffff81121668 0000000000000000 0000000000000000 ... [ 93.912819] Call Trace: [ 93.915273] [<ffffffff81121668>] show_stack+0x68/0x80 [ 93.920335] [<ffffffff81503984>] dump_stack+0x6c/0x90 [ 93.925395] [<ffffffff8113d58c>] warn_slowpath_common+0x94/0xd8 [ 93.931324] [<ffffffff811a402c>] flush_smp_call_function_queue+0x1c4/0x1d0 [ 93.938208] [<ffffffff811a4128>] hotplug_cfd+0xf0/0x108 [ 93.943444] [<ffffffff8115bacc>] notifier_call_chain+0x5c/0xb8 [ 93.949286] [<ffffffff8113d704>] cpu_notify+0x24/0x60 [ 93.954348] [<ffffffff81501738>] take_cpu_down+0x38/0x58 [ 93.959670] [<ffffffff811b343c>] multi_cpu_stop+0x154/0x180 [ 93.965250] [<ffffffff811b3768>] cpu_stopper_thread+0xd8/0x160 [ 93.971093] [<ffffffff8115ea4c>] smpboot_thread_fn+0x1ec/0x1f8 [ 93.976936] [<ffffffff8115ab04>] kthread+0xd4/0xf0 [ 93.981735] [<ffffffff8111c4f0>] ret_from_kernel_thread+0x14/0x1c [ 93.987835] [ 93.989326] ---[ end trace c9e3815ee655bda9 ]--- [ 93.993951] Kernel bug detected[#1]: [ 93.997533] CPU: 1 PID: 10 Comm: migration/1 Tainted: G W 3.19.0-rc4-octeon-los_b5f0 #1 [ 94.006591] task: 8000000032c77300 ti: 8000000032cb8000 task.ti: 8000000032cb8000 [ 94.014081] $ 0 : 0000000000000000 0000000010000ce1 0000000000000001 ffffffff81620000 [ 94.022146] $ 4 : 8000000002c72ac0 0000000000000000 00000000000001a7 ffffffff813b06f0 [ 94.030210] $ 8 : ffffffff813b20d8 0000000000000000 0000000000000000 ffffffff81630000 [ 94.038275] $12 : 0000000000000087 0000000000000000 0000000000000086 0000000000000000 [ 94.046339] $16 : ffffffff81623168 0000000000000001 0000000000000000 0000000000000008 [ 94.054405] $20 : 0000000000000001 0000000000000001 0000000000000001 0000000000000003 [ 94.062470] $24 : 0000000000000038 ffffffff813b7f10 [ 94.070536] $28 : 8000000032cb8000 8000000032cbbc20 0000000010008ce1 ffffffff811bcaf4 [ 94.078601] Hi : 0000000000f188e8 [ 94.082179] Lo : d4fdf3b646c09d55 [ 94.085760] epc : ffffffff811bc9d0 irq_work_run_list+0x8/0xf8 [ 94.091686] Tainted: G W [ 94.095613] ra : ffffffff811bcaf4 irq_work_run+0x34/0x60 [ 94.101192] Status: 10000ce3 KX SX UX KERNEL EXL IE [ 94.106235] Cause : 40808034 [ 94.109119] PrId : 000d9301 (Cavium Octeon II) [ 94.113653] Modules linked in: [ 94.116721] Process migration/1 (pid: 10, threadinfo=8000000032cb8000, task=8000000032c77300, tls=0000000000000000) [ 94.127168] Stack : 8000000002c74c80 ffffffff811a4128 0000000000000001 ffffffff81635720 fffffffffffffff2 ffffffff8115bacc 80000000320fbce0 80000000320fbca4 80000000320fbc80 0000000000000002 0000000000000004 ffffffff8113d704 80000000320fbce0 ffffffff81501738 0000000000000003 ffffffff811b343c 8000000002c72aa0 8000000002c72aa8 ffffffff8159cae8 ffffffff8159caa0 ffffffff81650000 80000000320fbbf0 80000000320fbc80 ffffffff811b32e8 0000000000000000 ffffffff811b3768 ffffffff81622b80 ffffffff815148a8 8000000032c77300 8000000002c73e80 ffffffff815148a8 8000000032c77300 ffffffff81622b80 ffffffff815148a8 8000000032c77300 ffffffff81503f48 ffffffff8115ea0c ffffffff81620000 0000000000000000 ffffffff81174d64 ... [ 94.192771] Call Trace: [ 94.195222] [<ffffffff811bc9d0>] irq_work_run_list+0x8/0xf8 [ 94.200802] [<ffffffff811bcaf4>] irq_work_run+0x34/0x60 [ 94.206036] [<ffffffff811a4128>] hotplug_cfd+0xf0/0x108 [ 94.211269] [<ffffffff8115bacc>] notifier_call_chain+0x5c/0xb8 [ 94.217111] [<ffffffff8113d704>] cpu_notify+0x24/0x60 [ 94.222171] [<ffffffff81501738>] take_cpu_down+0x38/0x58 [ 94.227491] [<ffffffff811b343c>] multi_cpu_stop+0x154/0x180 [ 94.233072] [<ffffffff811b3768>] cpu_stopper_thread+0xd8/0x160 [ 94.238914] [<ffffffff8115ea4c>] smpboot_thread_fn+0x1ec/0x1f8 [ 94.244757] [<ffffffff8115ab04>] kthread+0xd4/0xf0 [ 94.249555] [<ffffffff8111c4f0>] ret_from_kernel_thread+0x14/0x1c [ 94.255654] [ 94.257146] Code: a2423c40 40026000 30420001 <00020336> dc820000 10400037 00000000 0000010f 0000010f [ 94.267183] ---[ end trace c9e3815ee655bdaa ]--- [ 94.271804] Fatal exception: panic in 5 seconds Reported-by:
David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8952/Signed-off-by:
-
Felix Fietkau authored
commit a3e6c1ef upstream. If the irq_chip does not define .irq_disable, any call to disable_irq will defer disabling the IRQ until it fires while marked as disabled. This assumes that the handler function checks for this condition, which handle_percpu_irq does not. In this case, calling disable_irq leads to an IRQ storm, if the interrupt fires while disabled. This optimization is only useful when disabling the IRQ is slow, which is not true for the MIPS CPU IRQ. Disable this optimization by implementing .irq_disable and .irq_enable Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8949/Signed-off-by:
-
David Daney authored
commit 9ead8632 upstream. The following commits: 5890f70f (MIPS: Use dedicated exception handler if CPU supports RI/XI exceptions) 6575b1d4 (MIPS: kernel: cpu-probe: Detect unique RI/XI exceptions) break the kernel for *all* existing MIPS CPUs that implement the CP0_PageGrain[IEC] bit. They cause the TLB exception handlers to be generated without the legacy execute-inhibit handling, but never set the CP0_PageGrain[IEC] bit to activate the use of dedicated exception vectors for execute-inhibit exceptions. The result is that upon detection of an execute-inhibit violation, we loop forever in the TLB exception handlers instead of sending SIGSEGV to the task. If we are generating TLB exception handlers expecting separate vectors, we must also enable the CP0_PageGrain[IEC] feature. The bug was introduced in kernel version 3.17. Signed-off-by:
-
Brian King authored
commit 3a9794d3 upstream. The following patch fixes an issue observed with 4k sector disks where the max_hw_sectors attribute was getting set too large in sd_revalidate_disk. Since sdkp->max_xfer_blocks is in units of SCSI logical blocks and queue_max_hw_sectors is in units of 512 byte blocks, on a 4k sector disk, every time we went through sd_revalidate_disk, we were taking the current value of queue_max_hw_sectors and increasing it by a factor of 8. Fix this by only shifting sdkp->max_xfer_blocks. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Reviewed-by:
Paolo Bonzini <pbonzini@redhat.com> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Robin Gong authored
commit a02bb401 upstream. For TKT238285 hardware issue which may cause txfifo store data twice can only be caught on i.mx6dl, we use pio mode instead of DMA mode on i.mx6dl. Fixes: f62caccd (spi: spi-imx: add DMA support) Signed-off-by:
Robin Gong <b38343@freescale.com> Signed-off-by:
-
Bhuvanchandra DV authored
commit 973fbce6 upstream. devm_* API was supposed to be used only in probe function call. Memory is allocated at 'probe' and free automatically at 'remove'. Usage of devm_* functions outside probe sometimes leads to memory leak. Avoid using devm_kzalloc in dspi_setup_transfer and use kzalloc instead. Also add the dspi_cleanup function to free the controller data upon cleanup. Acked-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Signed-off-by:
-
Myron Stowe authored
commit 06cf35f9 upstream. Some AMD CS553x devices have read-only BARs because of a firmware or hardware defect. There's a workaround in quirk_cs5536_vsa(), but it no longer works after 36e81648 ("PCI: Restore detection of read-only BARs"). Prior to 36e81648, we filled in res->start; afterwards we leave it zeroed out. The quirk only updated the size, so the driver tried to use a region starting at zero, which didn't work. Expand quirk_cs5536_vsa() to read the base addresses from the BARs and hard-code the sizes. On Nix's system BAR 2's read-only value is 0x6200. Prior to 36e81648, we interpret that as a 512-byte BAR based on the lowest-order bit set. Per datasheet sec 5.6.1, that BAR (MFGPT) requires only 64 bytes; use that to avoid clearing any address bits if a platform uses only 64-byte alignment. [bhelgaas: changelog, reduce BAR 2 size to 64] Fixes: 36e81648 ("PCI: Restore detection of read-only BARs") Link: https://bugzilla.kernel.org/show_bug.cgi?id=85991#c4 Link: http://support.amd.com/TechDocs/31506_cs5535_databook.pdf Link: http://support.amd.com/TechDocs/33238G_cs5536_db.pdfReported-and-tested-by:
Nix <nix@esperi.org.uk> Signed-off-by:
Myron Stowe <myron.stowe@redhat.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Charlotte Richardson authored
commit 51ac3d2f upstream. NEC OEMs the same platforms as Stratus does, which have multiple devices on some PCIe buses under downstream ports. Link: https://bugzilla.kernel.org/show_bug.cgi?id=51331 Fixes: 1278998f ("PCI: Work around Stratus ftServer broken PCIe hierarchy (fix DMI check)") Signed-off-by:
Charlotte Richardson <charlotte.richardson@stratus.com> Signed-off-by:
-
Lucas Stach authored
commit 19c5392e upstream. The DesignWare PCIe MSI hardware does not support MSI-X IRQs. Setting those up failed as a side effect of a bug which was fixed by 91f8ae82 ("PCI: designware: Setup and clear exactly one MSI at a time"). Now that this bug is fixed, MSI-X IRQs need to be rejected explicitly; otherwise devices trying to use them may end up with incorrectly working interrupts. Fixes: 91f8ae82 ("PCI: designware: Setup and clear exactly one MSI at a time") Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Sonic Zhang authored
commit b184c388 upstream. Create default gpio base if neither device node nor platform data is defined. Signed-off-by:
Sonic Zhang <sonic.zhang@analog.com> Reviewed-by:
Alexandre Courbot <acourbot@nvidia.com> Tested-by:
Antonio Fiol <antonio@fiol.es> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Johan Hovold authored
commit 49d2ca84 upstream. Fix memory leak in the gpio sysfs interface due to failure to drop reference to device returned by class_find_device when setting the gpio-line polarity. Fixes: 07697461 ("gpiolib: add support for changing value polarity in sysfs") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 0f303db0 upstream. Fix memory leak in the gpio sysfs interface due to failure to drop reference to device returned by class_find_device when creating a link. Fixes: a4177ee7 ("gpiolib: allow exported GPIO nodes to be named using sysfs links") Signed-off-by:
-
- 06 Feb, 2015 9 commits
-
-
Greg Kroah-Hartman authored
-
Stefano Stabellini authored
commit a4dba130 upstream. Introduce an arch specific function to find out whether a particular dma mapping operation needs to bounce on the swiotlb buffer. On ARM and ARM64, if the page involved is a foreign page and the device is not coherent, we need to bounce because at unmap time we cannot execute any required cache maintenance operations (we don't know how to find the pfn from the mfn). No change of behaviour for x86. Signed-off-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by:
David Vrabel <david.vrabel@citrix.com> Reviewed-by:
Ian Campbell <ian.campbell@citrix.com> Acked-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Catalin Marinas authored
commit d6ad3691 upstream. Commit 0b46b8a7 (clocksource: arch_timer: Fix code to use physical timers when requested) introduces the use of physical counters in the ARM architected timer driver. However, he arm64 kernel uses CNTVCT in VDSO. When booting in EL2, the kernel switches to the physical timers to make things easier for KVM but it continues to use the virtual counter both in user and kernel. While in such scenario CNTVCT == CNTPCT (since CNTVOFF is initialised by the kernel to 0), we want to spot firmware bugs corrupting CNTVOFF early (which would affect CNTVCT). Signed-off-by:
Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 0b46b8a7 ("clocksource: arch_timer: Fix code to use physical timers when requested") Cc: Ian Campbell <ijc@hellion.org.uk> Signed-off-by:
-
Viktor Babrian authored
commit 7ffd7b4e upstream. Put controller into init mode in network stop to end pending transmissions. The issue is observed in cases when transmitted frame is not acked. Signed-off-by:
Viktor Babrian <babrian.viktor@renyi.mta.hu> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Andrew Duggan authored
commit 8414947a upstream. If a touchpad reports the F11 data40 register then this indicates that the touchpad reports additional ACM (Accidental Contact Mitigation) data after the F11 data in the HID attention report. These additional bytes shift the position of the F30 button data causing the driver to incorrectly report button state when this functionality is present. This patch accounts for the additional data in the report. Fixes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1398533Signed-off-by:
Andrew Duggan <aduggan@synaptics.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Cc: Joseph Salisbury <joseph.salisbury@canonical.com> Signed-off-by:
-
Stephane Eranian authored
commit 98b008df upstream. This patch fixes a systematic crash in rapl_scale() due to an invalid pointer. The bug was introduced by commit: 89cbc767 ("x86: Replace __get_cpu_var uses") The fix is simple. Just put the parenthesis where it needs to be, i.e., around rapl_pmu. To my surprise, the compiler was not complaining about passing an integer instead of a pointer. Reported-by:
Vince Weaver <vincent.weaver@maine.edu> Tested-by:
Stephane Eranian <eranian@google.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: cl@linux.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20150122203834.GA10228@thinkpadSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Kan Liang authored
commit ef454cae upstream. Intel Airmont supports the same architectural and non-architectural performance monitoring events as Silvermont. Signed-off-by:
Kan Liang <kan.liang@intel.com> Signed-off-by:
-
Greg Thelen authored
commit 0346dadb upstream. Commit e61734c5 ("cgroup: remove cgroup->name") added two extra newlines to memcg oom kill log messages. This makes dmesg hard to read and parse. The issue affects 3.15+. Example: Task in /t <<< extra #1 killed as a result of limit of /t <<< extra #2 memory: usage 102400kB, limit 102400kB, failcnt 274712 Remove the extra newlines from memcg oom kill messages, so the messages look like: Task in /t killed as a result of limit of /t memory: usage 102400kB, limit 102400kB, failcnt 240649 Fixes: e61734c5 ("cgroup: remove cgroup->name") Signed-off-by:
Greg Thelen <gthelen@google.com> Acked-by:
-
Jan Kara authored
commit 14bf61ff upstream. Currently ->get_dqblk() and ->set_dqblk() use struct fs_disk_quota which tracks space limits and usage in 512-byte blocks. However VFS quotas track usage in bytes (as some filesystems require that) and we need to somehow pass this information. Upto now it wasn't a problem because we didn't do any unit conversion (thus VFS quota routines happily stuck number of bytes into d_bcount field of struct fd_disk_quota). Only if you tried to use Q_XGETQUOTA or Q_XSETQLIM for VFS quotas (or Q_GETQUOTA / Q_SETQUOTA for XFS quotas), you got bogus results. Hardly anyone tried this but reportedly some Samba users hit the problem in practice. So when we want interfaces compatible we need to fix this. We bite the bullet and define another quota structure used for passing information from/to ->get_dqblk()/->set_dqblk. It's somewhat sad we have to have more conversion routines in fs/quota/quota.c and another copying of quota structure slows down getting of quota information by about 2% but it seems cleaner than overloading e.g. units of d_bcount to bytes. Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
