- 06 May, 2018 3 commits
-
-
Ahmed Abdelsalam authored
IPv6 Segment Routing Header (SRH) contains a list of SIDs to be crossed by SR encapsulated packet. Each SID is encoded as an IPv6 prefix. When a Firewall receives an SR encapsulated packet, it should be able to identify which node previously processed the packet (previous SID), which node is going to process the packet next (next SID), and which node is the last to process the packet (last SID) which represent the final destination of the packet in case of inline SR mode. An example use-case of using these features could be SID list that includes two firewalls. When the second firewall receives a packet, it can check whether the packet has been processed by the first firewall or not. Based on that check, it decides to apply all rules, apply just subset of the rules, or totally skip all rules and forward the packet to the next SID. This patch extends SRH match to support matching previous SID, next SID, and last SID. Signed-off-by:
Ahmed Abdelsalam <amsalam20@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Laura Garcia Liebana authored
The modulus in the hash function was limited to > 1 as initially there was no sense to create a hashing of just one element. Nevertheless, there are certain cases specially for load balancing where this case needs to be addressed. This patch fixes the following error. Error: Could not process rule: Numerical result out of range add rule ip nftlb lb01 dnat to jhash ip saddr mod 1 map { 0: 192.168.0.10 } ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The solution comes to force the hash to 0 when the modulus is 1. Signed-off-by:Laura Garcia Liebana <nevola@gmail.com>
-
Laura Garcia Liebana authored
This patch includes a new attribute in the numgen structure to allow the lookup of an element based on the number generator as a key. For this purpose, different ops have been included to extend the current numgen inc functions. Currently, only supported for numgen incremental operations, but it will be supported for random in a follow-up patch. Signed-off-by:
-
- 26 Apr, 2018 6 commits
-
-
Cong Wang authored
Similarly, tbl->entries is not initialized after kmalloc(), therefore causes an uninit-value warning in ip_vs_lblc_check_expire(), as reported by syzbot. Reported-by: <syzbot+3e9695f147fb529aa9bc@syzkaller.appspotmail.com> Cc: Simon Horman <horms@verge.net.au> Cc: Julian Anastasov <ja@ssi.bg> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Julian Anastasov <ja@ssi.bg> Acked-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Cong Wang authored
tbl->entries is not initialized after kmalloc(), therefore causes an uninit-value warning in ip_vs_lblc_check_expire() as reported by syzbot. Reported-by: <syzbot+3dfdea57819073a04f21@syzkaller.appspotmail.com> Cc: Simon Horman <horms@verge.net.au> Cc: Julian Anastasov <ja@ssi.bg> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
http://git.kernel.org/pub/scm/linux/kernel/git/horms/ipvs-nextPablo Neira Ayuso authored
Simon Horman says: ==================== IPVS Updates for v4.18 please consider these IPVS enhancements for v4.18. * Whitepace cleanup * Add Maglev hashing algorithm as a IPVS scheduler Inju Song says "Implements the Google's Maglev hashing algorithm as a IPVS scheduler. Basically it provides consistent hashing but offers some special features about disruption and load balancing. 1) minimal disruption: when the set of destinations changes, a connection will likely be sent to the same destination as it was before. 2) load balancing: each destination will receive an almost equal number of connections. Seel also: [3.4 Consistent Hasing] in https://www.usenix.org/system/files/conference/nsdi16/nsdi16-paper-eisenbud.pdf " * Fix to correct implementation of Knuth's multiplicative hashing which is used in sh/dh/lblc/lblcr algorithms. Instead the implementation provided by the hash_32() macro is used. ==================== Signed-off-by: -
Florian Westphal authored
before: text data bss dec hex filename 5056 844 0 5900 170c net/netfilter/nft_exthdr.ko 102456 2316 401 105173 19ad5 net/netfilter/nf_tables.ko after: 106410 2392 401 109203 1aa93 net/netfilter/nf_tables.ko Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Florian Westphal authored
before: text data bss dec hex filename 2657 844 0 3501 dad net/netfilter/nft_rt.ko 100826 2240 401 103467 1942b net/netfilter/nf_tables.ko after: 2657 844 0 3501 dad net/netfilter/nft_rt.ko 102456 2316 401 105173 19ad5 net/netfilter/nf_tables.ko Signed-off-by:
-
Florian Westphal authored
size net/netfilter/nft_meta.ko text data bss dec hex filename 5826 936 1 6763 1a6b net/netfilter/nft_meta.ko 96407 2064 400 98871 18237 net/netfilter/nf_tables.ko after: 100826 2240 401 103467 1942b net/netfilter/nf_tables.ko Signed-off-by:
-
- 24 Apr, 2018 27 commits
-
-
Florian Westphal authored
It overcomplicates things for no reason. nft_meta_bridge only offers retrieval of bridge port interface name. Because of this being its own module, we had to export all nft_meta functions, which we can then make static again (which even reduces the size of nft_meta -- including bridge port retrieval...): before: text data bss dec hex filename 1838 832 0 2670 a6e net/bridge/netfilter/nft_meta_bridge.ko 6147 936 1 7084 1bac net/netfilter/nft_meta.ko after: 5826 936 1 6763 1a6b net/netfilter/nft_meta.ko Signed-off-by:
-
Florian Westphal authored
nft rejects rules that lack a timeout and a size limit when they're used to add elements from packet path. Pick a sane upperlimit instead of rejecting outright. The upperlimit is visible to userspace, just as if it would have been given during set declaration. Signed-off-by:
-
Florian Westphal authored
Marco De Benedetto says: I would like to use a timeout of 30 days for elements in a set but it seems there is a some kind of problem above 24d20h31m23s. Fix this by using 'jiffies64' for timeout handling to get same behaviour on 32 and 64bit systems. nftables passes timeouts as u64 in milliseconds to the kernel, but on kernel side we used a mixture of 'long' and jiffies conversions rather than u64 and jiffies64. Bugzilla: https://bugzilla.netfilter.org/show_bug.cgi?id=1237Signed-off-by:
-
Taehee Yoo authored
ipt_get_target is used to get struct xt_entry_target and ipt_get_target_c is used to get const struct xt_entry_target. However in the ipt_do_table, ipt_get_target is used to get const struct xt_entry_target. it should be replaced by ipt_get_target_c. Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Taehee Yoo authored
ebt_get_target similar to {ip/ip6/arp}t_get_target. and ebt_get_target_c similar to {ip/ip6/arp}t_get_target_c. Signed-off-by: -
Taehee Yoo authored
In the check_target, ip6t_get_target is called twice. Signed-off-by:
-
Taehee Yoo authored
EBT_MATCH and EBT_NOMATCH are used to change return value. match functions(ebt_xxx.c) return false when received frame is not matched and returns true when received frame is matched. but, EBT_MATCH_ITERATE understands oppositely. so, to change return value, EBT_MATCH and EBT_NOMATCH are used. but, we can use operation '!' simply. Signed-off-by:
-
Taehee Yoo authored
A ebt_free_table_info frees all of chainstacks. It similar to xt_free_table_info. this inline function reduces code line. Signed-off-by:
-
Taehee Yoo authored
There are no __exit mark in the helper modules. because these exit functions used to be called by init function but now that is not. so we can add __exit mark. Signed-off-by:
-
Thierry Du Tre authored
This is a patch proposal to support shifted ranges in portmaps. (i.e. tcp/udp incoming port 5000-5100 on WAN redirected to LAN 192.168.1.5:2000-2100) Currently DNAT only works for single port or identical port ranges. (i.e. ports 5000-5100 on WAN interface redirected to a LAN host while original destination port is not altered) When different port ranges are configured, either 'random' mode should be used, or else all incoming connections are mapped onto the first port in the redirect range. (in described example WAN:5000-5100 will all be mapped to 192.168.1.5:2000) This patch introduces a new mode indicated by flag NF_NAT_RANGE_PROTO_OFFSET which uses a base port value to calculate an offset with the destination port present in the incoming stream. That offset is then applied as index within the redirect port range (index modulo rangewidth to handle range overflow). In described example the base port would be 5000. An incoming stream with destination port 5004 would result in an offset value 4 which means that the NAT'ed stream will be using destination port 2004. Other possibilities include deterministic mapping of larger or multiple ranges to a smaller range : WAN:5000-5999 -> LAN:5000-5099 (maps WAN port 5*xx to port 51xx) This patch does not change any current behavior. It just adds new NAT proto range functionality which must be selected via the specific flag when intended to use. A patch for iptables (libipt_DNAT.c + libip6t_DNAT.c) will also be proposed which makes this functionality immediately available. Signed-off-by:
Thierry Du Tre <thierry@dtsystems.be> Signed-off-by:
-
Phil Sutter authored
Drop nft_set_type's ability to act as a container of multiple backend implementations it chooses from. Instead consolidate the whole selection logic in nft_select_set_ops() and the actual backend provided estimate() callback. This turns nf_tables_set_types into a list containing all available backends which is traversed when selecting one matching userspace requested criteria. Also, this change allows to embed nft_set_ops structure into nft_set_type and pull flags field into the latter as it's only used during selection phase. A crucial part of this change is to make sure the new layout respects hash backend constraints formerly enforced by nft_hash_select_ops() function: This is achieved by introduction of a specific estimate() callback for nft_hash_fast_ops which returns false for key lengths != 4. In turn, nft_hash_estimate() is changed to return false for key lengths == 4 so it won't be chosen by accident. Also, both callbacks must return false for unbounded sets as their size estimate depends on a known maximum element count. Note that this patch partially reverts commit 4f2921ca ("netfilter: nf_tables: meter: pick a set backend that supports updates") by making nft_set_ops_candidate() not explicitly look for an update callback but make NFT_SET_EVAL a regular backend feature flag which is checked along with the others. This way all feature requirements are checked in one go. Signed-off-by:
Phil Sutter <phil@nwl.cc> Signed-off-by:
-
Pablo Neira Ayuso authored
Keep it simple to start with, just report attribute offsets that can be useful to userspace when representating errors to users. Signed-off-by: -
Pablo Neira Ayuso authored
Replace the nf_tables_ prefix by nft_ and merge code into single lookup function whenever possible. In many cases we go over the 80-chars boundary function names, this save us ~50 LoC. Signed-off-by: -
Felix Fietkau authored
Pass all NAT types to the flow offload struct, otherwise parts of the address/port pair do not get translated properly, causing connection stalls Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
-
Felix Fietkau authored
Avoid looking at unrelated fields in UDP packets Signed-off-by:
-
Felix Fietkau authored
Allow the slow path to handle the shutdown of the connection with proper timeouts. The packet containing RST/FIN is also sent to the slow path and the TCP conntrack module will update its state. Signed-off-by:
-
Felix Fietkau authored
Since conntrack hasn't seen any packets from the offloaded flow in a while, and the timeout for offloaded flows is set to an extremely long value, we need to fix up the state before we can send a flow back to the slow path. For TCP, reset td_maxwin in both directions, which makes it resync its state on the next packets. Use the regular timeout for TCP and UDP established connections. This allows the slow path to take over again once the offload state has been torn down Signed-off-by:
-
Felix Fietkau authored
Preparation for sending flows back to the slow path Signed-off-by:
-
Felix Fietkau authored
On cleanup, this will be treated differently from FLOW_OFFLOAD_DYING: If FLOW_OFFLOAD_DYING is set, the connection is going away, so both the offload state and the connection tracking entry will be deleted. If FLOW_OFFLOAD_TEARDOWN is set, the connection remains alive, but the offload state is torn down. This is useful for cases that require more complex state tracking / timeout handling on TCP, or if the connection has been idle for too long. Support for sending flows back to the slow path will be implemented in a following patch Signed-off-by:
-
Felix Fietkau authored
It is too trivial to keep as a separate exported function Signed-off-by:
-
Felix Fietkau authored
Avoids having nf_flow_table depend on nftables (useful for future iptables backport work) Signed-off-by:
-
Felix Fietkau authored
The offload ip hook expects a pointer to the flowtable, not to the rhashtable. Since the rhashtable is the first member, this is safe for the moment, but breaks as soon as the structure layout changes Signed-off-by:
-
Felix Fietkau authored
Reduces duplication of .gc and .params in flowtable type definitions and makes the API clearer Signed-off-by:
-
Felix Fietkau authored
Since the offload hook code was moved, this table no longer depends on the IPv4 and IPv6 flowtable modules Signed-off-by:
-
Felix Fietkau authored
Useful as preparation for adding iptables support for offload. Signed-off-by:
-
Felix Fietkau authored
Allows the function to be shared with the IPv6 hook code Signed-off-by:
-
Felix Fietkau authored
Allows some minor code sharing with the ipv6 hook code and is also useful as preparation for adding iptables support for offload Signed-off-by:
-
- 21 Apr, 2018 3 commits
-
-
Felix Fietkau authored
Preparation for adding more code to the same module Signed-off-by:
-
Felix Fietkau authored
Reduces the number of cache lines touched in the offload forwarding path. This is safe because PMTU limits are bypassed for the forwarding path (see commit f87c10a8 for more details). Signed-off-by:
-
Felix Fietkau authored
Just like ip_dst_mtu_maybe_forward(), to avoid a dependency with ipv6.ko. Signed-off-by:
-
- 19 Apr, 2018 1 commit
-
-
Felix Fietkau authored
Reduce code duplication and make it much easier to read Signed-off-by:
-
