- 26 Sep, 2019 9 commits
-
-
Biju Das authored
Document RZ/G2N (R8A774B1) SoC bindings. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thierry Reding authored
The size of individual pages in the page pool in given by an order. The order is the binary logarithm of the number of pages that make up one of the pages in the pool. However, the driver currently passes the number of pages rather than the order, so it ends up wasting quite a bit of memory. Fix this by taking the binary logarithm and passing that in the order field. Fixes: 2af6106a ("net: stmmac: Introducing support for Page Pool") Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
Fei Liu reported a crash when doing netperf on a topo of macsec dev over veth: [ 448.919128] refcount_t: underflow; use-after-free. [ 449.090460] Call trace: [ 449.092895] refcount_sub_and_test+0xb4/0xc0 [ 449.097155] tcp_wfree+0x2c/0x150 [ 449.100460] ip_rcv+0x1d4/0x3a8 [ 449.103591] __netif_receive_skb_core+0x554/0xae0 [ 449.108282] __netif_receive_skb+0x28/0x78 [ 449.112366] netif_receive_skb_internal+0x54/0x100 [ 449.117144] napi_gro_complete+0x70/0xc0 [ 449.121054] napi_gro_flush+0x6c/0x90 [ 449.124703] napi_complete_done+0x50/0x130 [ 449.128788] gro_cell_poll+0x8c/0xa8 [ 449.132351] net_rx_action+0x16c/0x3f8 [ 449.136088] __do_softirq+0x128/0x320 The issue was caused by skb's true_size changed without its sk's sk_wmem_alloc increased in tcp/skb_gro_receive(). Later when the skb is being freed and the skb's truesize is subtracted from its sk's sk_wmem_alloc in tcp_wfree(), underflow occurs. macsec is calling gro_cells_receive() to receive a packet, which actually requires skb->sk to be NULL. However when macsec dev is over veth, it's possible the skb->sk is still set if the skb was not unshared or expanded from the peer veth. ip_rcv() is calling skb_orphan() to drop the skb's sk for tproxy, but it is too late for macsec's calling gro_cells_receive(). So fix it by dropping the skb's sk earlier on rx path of macsec. Fixes: 5491e7c6 ("macsec: enable GRO and RPS on macsec devices") Reported-by: Xiumei Mu <xmu@redhat.com> Reported-by: Fei Liu <feliu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-09-24 This series introduces some fixes to mlx5 driver. For more information please see tag log below. Please pull and let me know if there is any problem. For -stable v4.20: ('net/mlx5e: Fix traffic duplication in ethtool steering') For -stable v4.19: ('net/mlx5: Add device ID of upcoming BlueField-2') For -stable v5.3: ('net/mlx5e: Fix matching on tunnel addresses type') ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason A. Donenfeld authored
Proper warnings with stack traces make it much easier to figure out what's doing the double free and create more meaningful bug reports from users. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vinicius Costa Gomes authored
When removing a cbs instance when offloading is enabled, the crash below can be observed. The problem happens because that when offloading is enabled, the cbs instance is not added to the list. Also, the current code doesn't handle correctly the case when offload is disabled without removing the qdisc: if the link speed changes the credit calculations will be wrong. When we create the cbs instance with offloading enabled, it's not added to the notification list, when later we disable offloading, it's not in the list, so link speed changes will not affect it. The solution for both issues is the same, add the cbs instance being created unconditionally to the global list, even if the link state notification isn't useful "right now". Crash log: [518758.189866] BUG: kernel NULL pointer dereference, address: 0000000000000000 [518758.189870] #PF: supervisor read access in kernel mode [518758.189871] #PF: error_code(0x0000) - not-present page [518758.189872] PGD 0 P4D 0 [518758.189874] Oops: 0000 [#1] SMP PTI [518758.189876] CPU: 3 PID: 4825 Comm: tc Not tainted 5.2.9 #1 [518758.189877] Hardware name: Gigabyte Technology Co., Ltd. Z390 AORUS ULTRA/Z390 AORUS ULTRA-CF, BIOS F7 03/14/2019 [518758.189881] RIP: 0010:__list_del_entry_valid+0x29/0xa0 [518758.189883] Code: 90 48 b8 00 01 00 00 00 00 ad de 55 48 8b 17 4c 8b 47 08 48 89 e5 48 39 c2 74 27 48 b8 00 02 00 00 00 00 ad de 49 39 c0 74 2d <49> 8b 30 48 39 fe 75 3d 48 8b 52 08 48 39 f2 75 4c b8 01 00 00 00 [518758.189885] RSP: 0018:ffffa27e43903990 EFLAGS: 00010207 [518758.189887] RAX: dead000000000200 RBX: ffff8bce69f0f000 RCX: 0000000000000000 [518758.189888] RDX: 0000000000000000 RSI: ffff8bce69f0f064 RDI: ffff8bce69f0f1e0 [518758.189890] RBP: ffffa27e43903990 R08: 0000000000000000 R09: ffff8bce69e788c0 [518758.189891] R10: ffff8bce62acd400 R11: 00000000000003cb R12: ffff8bce69e78000 [518758.189892] R13: ffff8bce69f0f140 R14: 0000000000000000 R15: 0000000000000000 [518758.189894] FS: 00007fa1572c8f80(0000) GS:ffff8bce6e0c0000(0000) knlGS:0000000000000000 [518758.189895] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [518758.189896] CR2: 0000000000000000 CR3: 000000040a398006 CR4: 00000000003606e0 [518758.189898] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [518758.189899] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [518758.189900] Call Trace: [518758.189904] cbs_destroy+0x32/0xa0 [sch_cbs] [518758.189906] qdisc_destroy+0x45/0x120 [518758.189907] qdisc_put+0x25/0x30 [518758.189908] qdisc_graft+0x2c1/0x450 [518758.189910] tc_get_qdisc+0x1c8/0x310 [518758.189912] ? get_page_from_freelist+0x91a/0xcb0 [518758.189914] rtnetlink_rcv_msg+0x293/0x360 [518758.189916] ? kmem_cache_alloc_node_trace+0x178/0x260 [518758.189918] ? __kmalloc_node_track_caller+0x38/0x50 [518758.189920] ? rtnl_calcit.isra.0+0xf0/0xf0 [518758.189922] netlink_rcv_skb+0x48/0x110 [518758.189923] rtnetlink_rcv+0x10/0x20 [518758.189925] netlink_unicast+0x15b/0x1d0 [518758.189926] netlink_sendmsg+0x1ea/0x380 [518758.189929] sock_sendmsg+0x2f/0x40 [518758.189930] ___sys_sendmsg+0x295/0x2f0 [518758.189932] ? ___sys_recvmsg+0x151/0x1e0 [518758.189933] ? do_wp_page+0x7e/0x450 [518758.189935] __sys_sendmsg+0x48/0x80 [518758.189937] __x64_sys_sendmsg+0x1a/0x20 [518758.189939] do_syscall_64+0x53/0x1f0 [518758.189941] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [518758.189942] RIP: 0033:0x7fa15755169a [518758.189944] Code: 48 c7 c0 ff ff ff ff eb be 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 18 b8 2e 00 00 00 c5 fc 77 0f 05 <48> 3d 00 f0 ff ff 77 5e c3 0f 1f 44 00 00 48 83 ec 28 89 54 24 1c [518758.189946] RSP: 002b:00007ffda58b60b8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [518758.189948] RAX: ffffffffffffffda RBX: 000055e4b836d9a0 RCX: 00007fa15755169a [518758.189949] RDX: 0000000000000000 RSI: 00007ffda58b6128 RDI: 0000000000000003 [518758.189951] RBP: 00007ffda58b6190 R08: 0000000000000001 R09: 000055e4b9d848a0 [518758.189952] R10: 0000000000000000 R11: 0000000000000246 R12: 000000005d654b49 [518758.189953] R13: 0000000000000000 R14: 00007ffda58b6230 R15: 00007ffda58b6210 [518758.189955] Modules linked in: sch_cbs sch_etf sch_mqprio netlink_diag unix_diag e1000e igb intel_pch_thermal thermal video backlight pcc_cpufreq [518758.189960] CR2: 0000000000000000 [518758.189961] ---[ end trace 6a13f7aaf5376019 ]--- [518758.189963] RIP: 0010:__list_del_entry_valid+0x29/0xa0 [518758.189964] Code: 90 48 b8 00 01 00 00 00 00 ad de 55 48 8b 17 4c 8b 47 08 48 89 e5 48 39 c2 74 27 48 b8 00 02 00 00 00 00 ad de 49 39 c0 74 2d <49> 8b 30 48 39 fe 75 3d 48 8b 52 08 48 39 f2 75 4c b8 01 00 00 00 [518758.189967] RSP: 0018:ffffa27e43903990 EFLAGS: 00010207 [518758.189968] RAX: dead000000000200 RBX: ffff8bce69f0f000 RCX: 0000000000000000 [518758.189969] RDX: 0000000000000000 RSI: ffff8bce69f0f064 RDI: ffff8bce69f0f1e0 [518758.189971] RBP: ffffa27e43903990 R08: 0000000000000000 R09: ffff8bce69e788c0 [518758.189972] R10: ffff8bce62acd400 R11: 00000000000003cb R12: ffff8bce69e78000 [518758.189973] R13: ffff8bce69f0f140 R14: 0000000000000000 R15: 0000000000000000 [518758.189975] FS: 00007fa1572c8f80(0000) GS:ffff8bce6e0c0000(0000) knlGS:0000000000000000 [518758.189976] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [518758.189977] CR2: 0000000000000000 CR3: 000000040a398006 CR4: 00000000003606e0 [518758.189979] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [518758.189980] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: e0a7683d ("net/sched: cbs: fix port_rate miscalculation") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Krzysztof Kozlowski authored
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Kalle Valo <kvalo@codeaurora.org> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Krzysztof Kozlowski authored
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rain River authored
Yanjun has been spending quite a lot of time fixing bugs in FORCEDETH source code. I'd like to add Yanjun to maintainers list. Signed-off-by: Rain River <rain.1986.08.12@gmail.com> Acked-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 25 Sep, 2019 8 commits
-
-
Shubhrajyoti Datta authored
macb_64b_desc is always called when HW_DMA_CAP_64B is defined. So the return NULL can never be reached. Remove the dead code. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jose Abreu authored
The Flow Control selftest is also available with ASYM Pause. Lets add this check to the test and fix eventual false positive failures. Fixes: 091810db ("net: stmmac: Introduce selftests support") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YueHaibing authored
Fix sparse warning: drivers/net/ethernet/freescale/gianfar.c:2070:6: warning: symbol 'reset_gfar' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
There is a statement that is indented one level too many, remove the extraneous tab. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Takeshi Misawa authored
When ppp is closing, __ppp_xmit_process() failed to enqueue skb and skb allocated in ppp_write() is leaked. syzbot reported : BUG: memory leak unreferenced object 0xffff88812a17bc00 (size 224): comm "syz-executor673", pid 6952, jiffies 4294942888 (age 13.040s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d110fff9>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<00000000d110fff9>] slab_post_alloc_hook mm/slab.h:522 [inline] [<00000000d110fff9>] slab_alloc_node mm/slab.c:3262 [inline] [<00000000d110fff9>] kmem_cache_alloc_node+0x163/0x2f0 mm/slab.c:3574 [<000000002d616113>] __alloc_skb+0x6e/0x210 net/core/skbuff.c:197 [<000000000167fc45>] alloc_skb include/linux/skbuff.h:1055 [inline] [<000000000167fc45>] ppp_write+0x48/0x120 drivers/net/ppp/ppp_generic.c:502 [<000000009ab42c0b>] __vfs_write+0x43/0xa0 fs/read_write.c:494 [<00000000086b2e22>] vfs_write fs/read_write.c:558 [inline] [<00000000086b2e22>] vfs_write+0xee/0x210 fs/read_write.c:542 [<00000000a2b70ef9>] ksys_write+0x7c/0x130 fs/read_write.c:611 [<00000000ce5e0fdd>] __do_sys_write fs/read_write.c:623 [inline] [<00000000ce5e0fdd>] __se_sys_write fs/read_write.c:620 [inline] [<00000000ce5e0fdd>] __x64_sys_write+0x1e/0x30 fs/read_write.c:620 [<00000000d9d7b370>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:296 [<0000000006e6d506>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by freeing skb, if ppp is closing. Fixes: 6d066734 ("ppp: avoid loop in xmit recursion detection code") Reported-and-tested-by: syzbot+d9c8bf24e56416d7ce2c@syzkaller.appspotmail.com Signed-off-by: Takeshi Misawa <jeliantsurux@gmail.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Tested-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Juliet Kim says: ==================== net/ibmvnic: serialization fixes This series includes two fixes. The first improves reset code to allow linkwatch_event to proceed during reset. The second ensures that no more than one thread runs in reset at a time. v2: - Separate change param reset from do_reset() - Return IBMVNIC_OPEN_FAILED if __ibmvnic_open fails - Remove setting wait_for_reset to false from __ibmvnic_reset(), this is done in wait_for_reset() - Move the check for force_reset_recovery from patch 1 to patch 2 v3: - Restore reset’s successful return in open failure case v4: - Change resetting flag access to atomic ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Juliet Kim authored
The current code allows more than one thread to run in reset. This can corrupt struct adapter data. Check adapter->resetting before performing a reset, if there is another reset running delay (100 msec) before trying again. Signed-off-by: Juliet Kim <julietk@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Juliet Kim authored
Commit a5681e20 ("net/ibmnvic: Fix deadlock problem in reset") made the change to hold the RTNL lock during a reset to avoid deadlock but linkwatch_event is fired during the reset and needs the RTNL lock. That keeps linkwatch_event process from proceeding until the reset is complete. The reset process cannot tolerate the linkwatch_event processing after reset completes, so release the RTNL lock during the process to allow a chance for linkwatch_event to run during reset. This does not guarantee that the linkwatch_event will be processed as soon as link state changes, but is an improvement over the current code where linkwatch_event processing is always delayed, which prevents transmissions on the device from being deactivated leading transmit watchdog timer to time-out. Release the RTNL lock before link state change and re-acquire after the link state change to allow linkwatch_event to grab the RTNL lock and run during the reset. Fixes: a5681e20 ("net/ibmnvic: Fix deadlock problem in reset") Signed-off-by: Juliet Kim <julietk@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 24 Sep, 2019 16 commits
-
-
Stephen Hemminger authored
Running old skge driver on PowerPC causes checksum errors because hardware reported 1's complement checksum is in little-endian byte order. Reported-by: Benoit <benoit.sansoni@gmail.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Uwe Kleine-König authored
struct archdr is only big enough to hold the header of various types of arcnet packets. So to provide enough space to hold the data read from hardware provide a buffer large enough to hold a packet with maximal size. The problem was noticed by the stack protector which makes the kernel oops. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Greg Kroah-Hartman says: ==================== Raw socket cleanups Ori Nimron pointed out that there are a number of places in the kernel where you can create a raw socket, without having to have the CAP_NET_RAW permission. To resolve this, here's a short patch series to test these odd and old protocols for this permission before allowing the creation to succeed All patches are currently against the net tree. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ori Nimron authored
When creating a raw AF_NFC socket, CAP_NET_RAW needs to be checked first. Signed-off-by: Ori Nimron <orinimron123@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ori Nimron authored
When creating a raw AF_IEEE802154 socket, CAP_NET_RAW needs to be checked first. Signed-off-by: Ori Nimron <orinimron123@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ori Nimron authored
When creating a raw AF_AX25 socket, CAP_NET_RAW needs to be checked first. Signed-off-by: Ori Nimron <orinimron123@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ori Nimron authored
When creating a raw AF_APPLETALK socket, CAP_NET_RAW needs to be checked first. Signed-off-by: Ori Nimron <orinimron123@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ori Nimron authored
When creating a raw AF_ISDN socket, CAP_NET_RAW needs to be checked first. Signed-off-by: Ori Nimron <orinimron123@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
If the allocation done in tcf_exts_init() failed, we end up with a NULL pointer in exts->actions. kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 8198 Comm: syz-executor.3 Not tainted 5.3.0-rc8+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:tcf_action_destroy+0x71/0x160 net/sched/act_api.c:705 Code: c3 08 44 89 ee e8 4f cb bb fb 41 83 fd 20 0f 84 c9 00 00 00 e8 c0 c9 bb fb 48 89 d8 48 b9 00 00 00 00 00 fc ff df 48 c1 e8 03 <80> 3c 08 00 0f 85 c0 00 00 00 4c 8b 33 4d 85 f6 0f 84 9d 00 00 00 RSP: 0018:ffff888096e16ff0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: dffffc0000000000 RDX: 0000000000040000 RSI: ffffffff85b6ab30 RDI: 0000000000000000 RBP: ffff888096e17020 R08: ffff8880993f6140 R09: fffffbfff11cae67 R10: fffffbfff11cae66 R11: ffffffff88e57333 R12: 0000000000000000 R13: 0000000000000000 R14: ffff888096e177a0 R15: 0000000000000001 FS: 00007f62bc84a700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000758040 CR3: 0000000088b64000 CR4: 00000000001426e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: tcf_exts_destroy+0x38/0xb0 net/sched/cls_api.c:3030 tcindex_set_parms+0xf7f/0x1e50 net/sched/cls_tcindex.c:488 tcindex_change+0x230/0x318 net/sched/cls_tcindex.c:519 tc_new_tfilter+0xa4b/0x1c70 net/sched/cls_api.c:2152 rtnetlink_rcv_msg+0x838/0xb00 net/core/rtnetlink.c:5214 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5241 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0x531/0x710 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x8a5/0xd60 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:657 ___sys_sendmsg+0x3e2/0x920 net/socket.c:2311 __sys_sendmmsg+0x1bf/0x4d0 net/socket.c:2413 __do_sys_sendmmsg net/socket.c:2442 [inline] Fixes: 90b73b77 ("net: sched: change action API to use array of pointers to actions") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Vlad Buslov <vladbu@mellanox.com> Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dmytro Linkin authored
In mlx5 parse_tunnel_attr() function dispatch on encap IP address type is performed by directly checking flow_rule_match_key() on FLOW_DISSECTOR_KEY_ENC_IPV4_ADDRS, and then on FLOW_DISSECTOR_KEY_ENC_IPV6_ADDRS. However, since those are stored in union, first check is always true if any type of encap address is set, which leads to IPv6 tunnel encap address being parsed as IPv4 by mlx5. Determine correct IP address type by checking control key first and if it set, take address type from match.key->addr_type. Fixes: d1bda7ee ("net/mlx5e: Allow matching only enc_key_id/enc_dst_port for decapsulation action") Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Saeed Mahameed authored
Before this patch, when adding multiple ethtool steering rules with identical classification, the driver used to append the new destination to the already existing hw rule, which caused the hw to forward the traffic to all destinations (rx queues). Here we avoid this by setting the "no append" mlx5 fs core flag when adding a new ethtool rule. Fixes: 6dc6071c ("net/mlx5e: Add ethtool flow steering support") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Bodong Wang authored
Add the device ID of upcoming BlueField-2 integrated ConnectX-6 Dx network controller. Its VFs will be using the generic VF device ID: 0x101e "ConnectX Family mlx5Gen Virtual Function". Fixes: 2e9d3e83 ("net/mlx5: Update the list of the PCI supported devices") Signed-off-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Alaa Hleihel authored
In case source_eswitch_owner_vhca_id is given as a match, the source_vport (vhca_id) will be set in case vhca_id_valid. This will allow matching on peer vports, vports that belong to the other pf. Fixes: 26d688e3 ("net/mlx5: DR, Add Steering entry (STE) utilities") Signed-off-by: Alaa Hleihel <alaa@mellanox.com> Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Alex Vesker authored
When we free an STE and the STE is in the middle of collision list, the prev_ste was obtained incorrectly from the list. To avoid such issues list_entry calls replaced with standard list API. Fixes: 26d688e3 ("net/mlx5: DR, Add Steering entry (STE) utilities") Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Alex Vesker authored
The vport number is part of the vport_cap, there is no reason to store in a separate variable on the vport. Fixes: 9db810ed ("net/mlx5: DR, Expose steering action functionality") Signed-off-by: Alex Vesker <valex@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Yevgeny Kliteynik authored
Fix wrong reserved bits offsets. Fixes: 97b5484e ("net/mlx5: Add HW bits and definitions required for SW steering") Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com> Reviewed-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
- 22 Sep, 2019 7 commits
-
-
Nishad Kamdar authored
This patch corrects the SPDX License Identifier style in header file for Distributed Switch Architecture drivers. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Nishad Kamdar authored
This patch corrects the SPDX License Identifier style in header file for Broadcom BCM53xx managed switch driver. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Dan Carpenter authored
We need to set the error code on this path. Otherwise it probably results in a NULL dereference down the line. Fixes: aa319881 ("ionic: Add RSS support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Mao Wenan authored
If CONFIG_ENA_ETHERNET=y and CONFIG_DIMLIB=n, below erros can be found: drivers/net/ethernet/amazon/ena/ena_netdev.o: In function `ena_dim_work': ena_netdev.c:(.text+0x21cc): undefined reference to `net_dim_get_rx_moderation' ena_netdev.c:(.text+0x21cc): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `net_dim_get_rx_moderation' drivers/net/ethernet/amazon/ena/ena_netdev.o: In function `ena_io_poll': ena_netdev.c:(.text+0x7bd4): undefined reference to `net_dim' ena_netdev.c:(.text+0x7bd4): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `net_dim' After commit 282faf61 ("net: ena: switch to dim algorithm for rx adaptive interrupt moderation"), it introduces dim algorithm, which configured by CONFIG_DIMLIB. So, this patch is to select DIMLIB for ENA_ETHERNET. Fixes: 282faf61 ("net: ena: switch to dim algorithm for rx adaptive interrupt moderation") Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Christophe JAILLET authored
Use 'skb_put_data()' instead of rewritting it. This improves readability. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Arnd Bergmann authored
Putting a struct stmmac_rss object on the stack is a bad idea, as it exceeds the warning limit for a stack frame on 32-bit architectures: drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c:1221:12: error: stack frame size of 1208 bytes in function '__stmmac_test_l3filt' [-Werror,-Wframe-larger-than=] drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c:1338:12: error: stack frame size of 1208 bytes in function '__stmmac_test_l4filt' [-Werror,-Wframe-larger-than=] As the object is the trivial empty case, change the called function to accept a NULL pointer to mean the same thing and remove the large variable in the two callers. Fixes: 4647e021 ("net: stmmac: selftests: Add selftest for L3/L4 Filters") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Mao Wenan authored
If CONFIG_NET_DSA_SJA1105_TAS=y and CONFIG_NET_SCH_TAPRIO=n, below error can be found: drivers/net/dsa/sja1105/sja1105_tas.o: In function `sja1105_setup_tc_taprio': sja1105_tas.c:(.text+0x318): undefined reference to `taprio_offload_free' sja1105_tas.c:(.text+0x590): undefined reference to `taprio_offload_get' drivers/net/dsa/sja1105/sja1105_tas.o: In function `sja1105_tas_teardown': sja1105_tas.c:(.text+0x610): undefined reference to `taprio_offload_free' make: *** [vmlinux] Error 1 sja1105_tas needs tc-taprio, so this patch add the dependency for it. Fixes: 317ab5b8 ("net: dsa: sja1105: Configure the Time-Aware Scheduler via tc-taprio offload") Signed-off-by: Mao Wenan <maowenan@huawei.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-