Pull power supply and reset updates from Sebastian Reichel:

 - Improve support for TI bq20z75 in sbs-battery

 - Add Qualcomm PM8xxx reboot driver

 - Add cros-ec USBPD charger driver

 - Move ds2760 battery driver from w1 to power-supply and add DT support

 - Misc fixes

* tag 'for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits)
  power: supply: bq27xxx: Update comments
  power: supply: max77693_charger: fix unintentional fall-through
  power: supply: mark expected switch fall-throughs
  power: supply: lego_ev3_battery: fix Vce offset
  power: supply: lego_ev3_battery: Don't ignore iio_read_channel_processed() return value
  power: supply: ds2760_battery: add devicetree probing
  power: supply: ds2760_battery: merge ds2760 supply driver with its w1 slave companion
  w1: core: match sub-nodes of bus masters in devicetree
  dt-bindings: w1: document bindings for ds2760 battery monitor
  dt-bindings: w1: document generic onewire bindings
  power: supply: adp5061: Fix a couple off by ones
  dt-bindings: power: reset: qcom: Add resin binding
  adp5061: New driver for ADP5061 I2C battery charger
  power: generic-adc-battery: check for duplicate properties copied from iio channels
  power: generic-adc-battery: fix out-of-bounds write when copying channel properties
  power: supply: axp288_charger: Fix initial constant_charge_current value
  power: supply: ab8500: stop using getnstimeofday64()
  power: gemini-poweroff: Avoid more spurious poweroffs
  power: vexpress: fix corruption in notifier registration
  power: remove possible deadlock when unregistering power_supply
  ...

Pull i2c updates from Wolfram Sang:

 - the core has now a lockless variant of i2c_smbus_xfer. Some open
   coded versions of this got removed in drivers. This also enables
   proper SCCB support in regmap.

 - locking got a more precise naming. i2c_{un}lock_adapter() had to go,
   and we know use i2c_lock_bus() consistently with flags like
   I2C_LOCK_ROOT_ADAPTER and I2C_LOCK_SEGMENT to avoid ambiguity.

 - the gpio fault injector got a new delicate testcase

 - the bus recovery procedure got fixed to handle the new testcase
   correctly

 - a new quirk flag for controllers not able to handle zero length
   messages together with driver updates to use it

 - new drivers: FSI bus attached I2C masters, GENI I2C controller, Owl
   family S900

 - and a good set of driver improvements and bugfixes

* 'i2c/for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (77 commits)
  i2c: rcar: implement STOP and REP_START according to docs
  i2c: rcar: refactor private flags
  i2c: core: ACPI: Make acpi_gsb_i2c_read_bytes() check i2c_transfer return value
  i2c: core: ACPI: Properly set status byte to 0 for multi-byte writes
  dt-bindings: i2c: rcar: Add r8a774a1 support
  dt-bindings: i2c: sh_mobile: Add r8a774a1 support
  i2c: imx: Simplify stopped state tracking
  i2c: imx: Fix race condition in dma read
  i2c: pasemi: remove hardcoded bus numbers on smbus
  i2c: designware: Add SPDX license tag
  i2c: designware: Convert to use struct i2c_timings
  i2c: core: Parse SDA hold time from firmware
  i2c: designware-pcidrv: Mark expected switch fall-through
  i2c: amd8111: Mark expected switch fall-through
  i2c: sh_mobile: use core to detect 'no zero length read' quirk
  i2c: xlr: use core to detect 'no zero length' quirk
  i2c: rcar: use core to detect 'no zero length' quirk
  i2c: stu300: use core to detect 'no zero length' quirk
  i2c: pmcmsp: use core to detect 'no zero length' quirk
  i2c: mxs: use core to detect 'no zero length' quirk
  ...

Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull core signal handling updates from Eric Biederman:
 "It was observed that a periodic timer in combination with a
  sufficiently expensive fork could prevent fork from every completing.
  This contains the changes to remove the need for that restart.

  This set of changes is split into several parts:

   - The first part makes PIDTYPE_TGID a proper pid type instead
     something only for very special cases. The part starts using
     PIDTYPE_TGID enough so that in __send_signal where signals are
     actually delivered we know if the signal is being sent to a a group
     of processes or just a single process.

   - With that prep work out of the way the logic in fork is modified so
     that fork logically makes signals received while it is running
     appear to be received after the fork completes"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (22 commits)
  signal: Don't send signals to tasks that don't exist
  signal: Don't restart fork when signals come in.
  fork: Have new threads join on-going signal group stops
  fork: Skip setting TIF_SIGPENDING in ptrace_init_task
  signal: Add calculate_sigpending()
  fork: Unconditionally exit if a fatal signal is pending
  fork: Move and describe why the code examines PIDNS_ADDING
  signal: Push pid type down into complete_signal.
  signal: Push pid type down into __send_signal
  signal: Push pid type down into send_signal
  signal: Pass pid type into do_send_sig_info
  signal: Pass pid type into send_sigio_to_task & send_sigurg_to_task
  signal: Pass pid type into group_send_sig_info
  signal: Pass pid and pid type into send_sigqueue
  posix-timers: Noralize good_sigevent
  signal: Use PIDTYPE_TGID to clearly store where file signals will be sent
  pid: Implement PIDTYPE_TGID
  pids: Move the pgrp and session pid pointers from task_struct to signal_struct
  kvm: Don't open code task_pid in kvm_vcpu_ioctl
  pids: Compute task_tgid using signal->leader_pid
  ...

Merge tag 'chrome-platform-for-linus-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform

Pull chrome platform updates from Benson Leung.

Everything but the SPDX identifier updates actually came in earlier
through the MFD merge.

* tag 'chrome-platform-for-linus-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform:
  platform/chrome: chromeos_tbmc - fix SPDX identifier

Pull arch/microblaze updates from Michal Simek:

 - use generic noncoherent direct mapping

 - use LDFLAGS instead of LD

 - pci error path fix

 - remove incorrect comments

* tag 'microblaze-v4.19-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze/PCI: Remove stale pcibios_align_resource() comment
  microblaze: delete wrong comment about machine_early_init
  microblaze: add endianness options to LDFLAGS instead of LD
  microblaze: remove consistent_sync and consistent_sync_page
  microblaze: use generic dma_noncoherent_ops
  microblaze: warn if of_iomap() failed

commit 01cf9d52 ("microblaze/PCI: Support generic Xilinx AXI PCIe Host
Bridge IP driver")

and

commit ecf677c8 ("PCI: Add a generic weak pcibios_align_resource()")

first patched then removed pcibios_align_resource() from the microblaze
architecture code but failed to remove the comment that was added to
it.

Remove it since it has now become stale and it is quite confusing.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Bharat Kumar Gogada <bharatku@xilinx.com>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Pull ia64 NO_BOOTMEM conversion from Tony Luck:
 "Mike Rapoport kindly fixed up ia64 to work with NO_BOOTMEM"

* tag 'please-pull-noboot' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  ia64: switch to NO_BOOTMEM
  ia64: use mem_data to detect nodes' minimal and maximal PFNs
  ia64: remove unused num_dma_physpages member from 'struct early_node_data'
  ia64: contig/paging_init: reduce code duplication

Merge tag 'linux-kselftest-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest update from Shuah Khan:

 - add cgroup core selftests

 - fix compile warnings in android ion test

 - fix to bugs in exclude and skip paths in vDSO test

 - remove obsolete config options

 - add missing .gitignore file

* tag 'linux-kselftest-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/ftrace: Fix kprobe string testcase to not probe notrace function
  selftests: mount: remove no longer needed config option
  selftests: cgroup: add gitignore file
  Add cgroup core selftests
  selftests: vDSO - fix to return KSFT_SKIP when test couldn't be run
  selftests: vDSO - fix to exclude x86 test on non-x86 platforms
  selftests/android: initialize heap_type to avoid compiling warning

Pull tracing updates from Steven Rostedt:

 - Restructure of lockdep and latency tracers

   This is the biggest change. Joel Fernandes restructured the hooks
   from irqs and preemption disabling and enabling. He got rid of a lot
   of the preprocessor #ifdef mess that they caused.

   He turned both lockdep and the latency tracers to use trace events
   inserted in the preempt/irqs disabling paths. But unfortunately,
   these started to cause issues in corner cases. Thus, parts of the
   code was reverted back to where lockdep and the latency tracers just
   get called directly (without using the trace events). But because the
   original change cleaned up the code very nicely we kept that, as well
   as the trace events for preempt and irqs disabling, but they are
   limited to not being called in NMIs.

 - Have trace events use SRCU for "rcu idle" calls. This was required
   for the preempt/irqs off trace events. But it also had to not allow
   them to be called in NMI context. Waiting till Paul makes an NMI safe
   SRCU API.

 - New notrace SRCU API to allow trace events to use SRCU.

 - Addition of mcount-nop option support

 - SPDX headers replacing GPL templates.

 - Various other fixes and clean ups.

 - Some fixes are marked for stable, but were not fully tested before
   the merge window opened.

* tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits)
  tracing: Fix SPDX format headers to use C++ style comments
  tracing: Add SPDX License format tags to tracing files
  tracing: Add SPDX License format to bpf_trace.c
  blktrace: Add SPDX License format header
  s390/ftrace: Add -mfentry and -mnop-mcount support
  tracing: Add -mcount-nop option support
  tracing: Avoid calling cc-option -mrecord-mcount for every Makefile
  tracing: Handle CC_FLAGS_FTRACE more accurately
  Uprobe: Additional argument arch_uprobe to uprobe_write_opcode()
  Uprobes: Simplify uprobe_register() body
  tracepoints: Free early tracepoints after RCU is initialized
  uprobes: Use synchronize_rcu() not synchronize_sched()
  tracing: Fix synchronizing to event changes with tracepoint_synchronize_unregister()
  ftrace: Remove unused pointer ftrace_swapper_pid
  tracing: More reverting of "tracing: Centralize preemptirq tracepoints and unify their usage"
  tracing/irqsoff: Handle preempt_count for different configs
  tracing: Partial revert of "tracing: Centralize preemptirq tracepoints and unify their usage"
  tracing: irqsoff: Account for additional preempt_disable
  trace: Use rcu_dereference_raw for hooks from trace-event subsystem
  tracing/kprobes: Fix within_notrace_func() to check only notrace functions
  ...

Pull ceph updates from Ilya Dryomov:
 "The main things are support for cephx v2 authentication protocol and
  basic support for rbd images within namespaces (myself).

  Also included are y2038 conversion patches from Arnd, a pile of
  miscellaneous fixes from Chengguang and Zheng's feature bit
  infrastructure for the filesystem"

* tag 'ceph-for-4.19-rc1' of git://github.com/ceph/ceph-client: (40 commits)
  ceph: don't drop message if it contains more data than expected
  ceph: support cephfs' own feature bits
  crush: fix using plain integer as NULL warning
  libceph: remove unnecessary non NULL check for request_key
  ceph: refactor error handling code in ceph_reserve_caps()
  ceph: refactor ceph_unreserve_caps()
  ceph: change to void return type for __do_request()
  ceph: compare fsc->max_file_size and inode->i_size for max file size limit
  ceph: add additional size check in ceph_setattr()
  ceph: add additional offset check in ceph_write_iter()
  ceph: add additional range check in ceph_fallocate()
  ceph: add new field max_file_size in ceph_fs_client
  libceph: weaken sizeof check in ceph_x_verify_authorizer_reply()
  libceph: check authorizer reply/challenge length before reading
  libceph: implement CEPHX_V2 calculation mode
  libceph: add authorizer challenge
  libceph: factor out encrypt_authorizer()
  libceph: factor out __ceph_x_decrypt()
  libceph: factor out __prepare_write_connect()
  libceph: store ceph_auth_handshake pointer in ceph_connection
  ...

Pull RTC updates from Alexandre Belloni:
 "It is now possible to add custom sysfs attributes while avoiding a
  possible race condition. Unused code has been removed resulting in a
  nice reduction of the code base. And more drivers have been switched
  to SPDX by their maintainers.

 Summary:

  Subsystem:
   - new helpers to add custom sysfs attributes
   - struct rtc_task removal along with rtc_irq_[un]register()
   - rtc_irq_set_state and rtc_irq_set_freq are not exported anymore

  Drivers:
   - armada38x: reset after rtc power loss
   - ds1307: now supports m41t11
   - isl1208: now supports isl1219 and tamper detection
   - pcf2127: internal SRAM support"

* tag 'rtc-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (34 commits)
  rtc: ds1307: simplify hwmon config
  rtc: s5m: Add SPDX license identifier
  rtc: maxim: Add SPDX license identifiers
  rtc: isl1219: add device tree documentation
  rtc: isl1208: set ev-evienb bit from device tree
  rtc: isl1208: Add "evdet" interrupt source for isl1219
  rtc: isl1208: add support for isl1219 with tamper detection
  rtc: sysfs: facilitate attribute add to rtc device
  rtc: remove struct rtc_task
  char: rtc: remove task handling
  rtc: pcf85063: preserve control register value between stop and start
  rtc: sh: remove unused variable rtc_dev
  rtc: unexport rtc_irq_set_*
  rtc: simplify rtc_irq_set_state/rtc_irq_set_freq
  rtc: remove irq_task and irq_task_lock
  rtc: remove rtc_irq_register/rtc_irq_unregister
  rtc: sh: remove dead code
  rtc: sa1100: don't set PIE frequency
  rtc: ds1307: support m41t11 variant
  rtc: ds1307: fix data pointer to m41t0
  ...

Pull livepatching updates from Jiri Kosina:
 "Code cleanups from Kamalesh Babulal"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
  livepatch: Validate module/old func name length
  livepatch: Remove reliable stacktrace check in klp_try_switch_task()

Pull HID updates from Jiri Kosina:

 - touch_max detection improvements and quirk handling fixes in wacom
   driver from Jason Gerecke and Ping Cheng

 - Palm rejection from Dmitry Torokhov and _dial support from Benjamin
   Tissoires for hid-multitouch driver

 - Low voltage support for i2c-hid driver from Stephen Boyd

 - Guitar-Hero support from Nicolas Adenis-Lamarre

 - other assorted small fixes and device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (40 commits)
  HID: intel_ish-hid: tx_buf memory leak on probe/remove
  HID: intel-ish-hid: Prevent loading of driver on Mehlow
  HID: cougar: Add support for the Cougar 500k Gaming Keyboard
  HID: cougar: make compare_device_paths reusable
  HID: intel-ish-hid: remove redundant variable num_frags
  HID: multitouch: handle palm for touchscreens
  HID: multitouch: touchscreens also use confidence reports
  HID: multitouch: report MT_TOOL_PALM for non-confident touches
  HID: microsoft: support the Surface Dial
  HID: core: do not upper bound the collection stack
  HID: input: enable Totem on the Dell Canvas 27
  HID: multitouch: remove one copy of values
  HID: multitouch: ditch mt_report_id
  HID: multitouch: store a per application quirks value
  HID: multitouch: Store per collection multitouch data
  HID: multitouch: make sure the static list of class is not changed
  input: add MT_TOOL_DIAL
  HID: elan: Add support for touchpad on the Toshiba Click Mini L9W
  HID: elan: Add USB-id for HP x2 10-n000nd touchpad
  HID: elan: Add a flag for selecting if the touchpad has a LED
  ...

Pull backlight updates from Lee Jones:
 "Core Framework:
   - Remove unused/obsolete code/comments

  New Functionality:
   - Allow less granular brightness specification for high-res PWMs; pwm_bl
   - Align brightness {inc,dec}rements with that perceived by the human-eye; pwm_bl

  Fix-ups:
   - Prepare for the introduction of -Wimplicit-fall-through; adp8860_bl

  Bug Fixes:
   - Fix uninitialised variable; pwm_bl"

* tag 'backlight-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: pwm_bl: Fix uninitialized variable
  backlight: adp8860: Mark expected switch fall-through
  backlight: Remove obsolete comment for ->state
  dt-bindings: pwm-backlight: Move brightness-levels to optional
  backlight: pwm_bl: Compute brightness of LED linearly to human eye
  dt-bindings: pwm-backlight: Add a num-interpolation-steps property
  backlight: pwm_bl: Linear interpolation between brightness-levels

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver
   - Add ChromeOS EC CEC driver
   - Add ROHM BD71837 PMIC driver

  New Device Support:
   - Add support for Dialog Semi DA9063L PMIC variant to DA9063
   - Add support for Intel Ice Lake to Intel-PLSS-PCI
   - Add support for X-Powers AXP806 to AXP20x

  New Functionality:
   - Add support for USB Charging to the ChromeOS Embedded Controller
   - Add support for HDMI CEC to the ChromeOS Embedded Controller
   - Add support for HDMI CEC to Intel HDMI
   - Add support for accessory detection to Madera devices
   - Allow individual pins to be configured via DT' wlf,csnaddr-pd
   - Provide legacy platform specific EEPROM/Watchdog commands; rave-sp

  Fix-upsL
   - Trivial renaming/spelling fixes; cros_ec, da9063-*
   - Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc
   - Transition to helper macros/functions; da9063-*
   - Constify; kempld-core
   - Improve error path/messages; wm8994-core
   - Disable IRQs locally instead of relying on USB subsystem; dln2
   - Remove unused code; rave-sp
   - New exports; sec-core

  Bug Fixes:
   - Fix possible false I2C transaction error; arizona-core
   - Fix declared memory area size; hi655x-pmic
   - Fix checksum type; rave-sp
   - Fix incorrect default serial port configuration: rave-sp
   - Fix incorrect coherent DMA mask for sub-devices; sm501"

* tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits)
  mfd: madera: Add register definitions for accessory detect
  mfd: sm501: Set coherent_dma_mask when creating subdevices
  mfd: bd71837: Devicetree bindings for ROHM BD71837 PMIC
  mfd: bd71837: Core driver for ROHM BD71837 PMIC
  media: platform: cros-ec-cec: Fix dependency on MFD_CROS_EC
  mfd: sec-core: Export OF module alias table
  mfd: as3722: Disable auto-power-on when AC OK
  mfd: axp20x: Support AXP806 in I2C mode
  mfd: axp20x: Add self-working mode support for AXP806
  dt-bindings: mfd: axp20x: Add "self-working" mode for AXP806
  mfd: wm8994: Allow to configure CS/ADDR Pulldown from dts
  mfd: wm8994: Allow to configure Speaker Mode Pullup from dts
  mfd: rave-sp: Emulate CMD_GET_STATUS on device that don't support it
  mfd: rave-sp: Add legacy watchdog ping command translation
  mfd: rave-sp: Add legacy EEPROM access command translation
  mfd: rave-sp: Initialize flow control and parity of the port
  mfd: rave-sp: Fix incorrectly specified checksum type
  mfd: rave-sp: Remove unused defines
  mfd: hi655x: Fix regmap area declared size for hi655x
  mfd: ti_am335x_tscadc: Fix struct clk memory leak
  ...

Pull EDAC fix from Borislav Petkov:
 "An urgent fix for a NULL ptr deref on machines with LRDDR4 DIMMs, from
  Takashi Iwai"

* tag 'edac_fixes_for_4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC: Add missing MEM_LRDDR4 entry in edac_mem_types[]

Various architectures fail to build properly with older versions of the
gcc compiler.

An example from Guenter Roeck in thread [1]:
>
>   In file included from ./include/linux/mm.h:17:0,
>                    from ./include/linux/pid_namespace.h:7,
>                    from ./include/linux/ptrace.h:10,
>                    from arch/openrisc/kernel/asm-offsets.c:32:
>   ./include/linux/mm_types.h:497:16: error: flexible array member in otherwise empty struct
>
> This is just an example with gcc 4.5.1 for or32. I have seen the problem
> with gcc 4.4 (for unicore32) as well.

So update the minimum required version of gcc to 4.6.

[1] https://lore.kernel.org/lkml/20180814170904.GA12768@roeck-us.net/

Miscellanea:

 - Update Documentation/process/changes.rst

 - Remove and consolidate version test blocks in compiler-gcc.h for
   versions lower than 4.6
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 0bbf47ea ("ia64: use asm-generic/io.h") results in a BUG
while booting ia64.  This is because asm-generic/io.h defines
PCI_IOBASE, which results in the function acpi_pci_root_remap_iospace()
doing a lot of unnecessary (and wrong) things.

I'd suggested an #if !CONFIG_IA64 in the functon, but Arnd suggested
keeping the fix inside the arch/ia64 tree.

Fixes: 0bbf47ea ("ia64: use asm-generic/io.h")
Suggested-by: Arnd Bergman <arnd@arndb.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Guitar-Hero devices support for hid-wiimote

Wacom driver updates:

- touch_max detection improvements
- quirk handling cleanup
- get rid of wacom custom usages

Assorted small driver/core fixes.

devm_* API conversion for hid-sony

Multitouch updates:

- Dial support
- Palm rejection for touchscreens
- a few small assorted fixes

Device-specific fixes for hid-intel-ish

Low voltage support for i2c-hid

Resolution/pressure fixes and new device support for hid-elan

New device support for hid-cougar

When doing a REP_START after a read message, the driver used to trigger
a STOP first which would then be overwritten by REP_START. This was the
only stable method found when doing the last refactoring. However, this
was not in accordance with the documentation.

After research from our BSP team and myself, we now can implement a
version which works and is according to the documentation. The new
approach ensures the ICMCR register is only changed when really needed.

Tested on a R-Car Gen2 (H2) and Gen3 with DMA (M3N).
Signed-off-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Use BIT macro to avoid shift-31-problem, indent a little more and use
GENMASK to make it easier to add new flags.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Currently acpi_gsb_i2c_read_bytes() directly returns i2c_transfer's return
value. i2c_transfer returns a value < 0 on error and 2 (for 2 successfully
executed transfers) on success. But the ACPI code expects 0 on success, so
currently acpi_gsb_i2c_read_bytes()'s caller does:

        if (status > 0)
                status = 0;

This commit makes acpi_gsb_i2c_read_bytes() return a value which can be
directly consumed by the ACPI code, mirroring acpi_gsb_i2c_write_bytes(),
this commit also makes acpi_gsb_i2c_read_bytes() explitcly check that
i2c_transfer returns 2, rather then accepting any value > 0.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

acpi_gsb_i2c_write_bytes() returns i2c_transfer()'s return value, which
is the number of transfers executed on success, so 1.

The ACPI code expects us to store 0 in gsb->status for success, not 1.

Specifically this breaks the following code in the Thinkpad 8 DSDT:

            ECWR = I2CW = ECWR /* \_SB_.I2C1.BAT0.ECWR */
            If ((ECST == Zero))
            {
                ECRD = I2CR /* \_SB_.I2C1.I2CR */
            }

Before this commit we set ECST to 1, causing the read to never happen
breaking battery monitoring on the Thinkpad 8.

This commit makes acpi_gsb_i2c_write_bytes() return 0 when i2c_transfer()
returns 1, so the single write transfer completed successfully, and
makes it return -EIO on for other (unexpected) return values >= 0.

Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Document RZ/G2M (R8A774A1) I2C compatibility with the relevant driver
dt-bindings.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Document RZ/G2M (R8A774A1) SoC bindings.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Always update the stopped state when busy status have been checked.
This is identical to what was done before, with the exception of error
handling.
Without this change, some errors cause the stopped state to be left in
incorrect state in i2c_imx_stop(), i2c_imx_dma_read(), i2c_imx_read() and
i2c_imx_xfer().
Signed-off-by: Esben Haabendal <eha@deif.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

This fixes a race condition, where the DMAEN bit ends up being set after
I2C slave has transmitted a byte following the dummy read.  When that
happens, an interrupt is generated instead, and no DMA request is generated
to kickstart the DMA read, and a timeout happens after DMA_TIMEOUT (1 sec).

Fixed by setting the DMAEN bit before the dummy read.
Signed-off-by: Esben Haabendal <eha@deif.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org

The pasemi smbus controller uses PCI_FUNC(dev->devfn) to define which
number bus to attach to, however this fails when something else is
probed first, for example an ATI Radeon graphics card will claim 9 or
10 busses, including the ones the pasemi wants.
Patch the driver to call i2c_add_adapter rather than
i2c_add_numbered_adapter.
Signed-off-by: Darren Stevens <darren@stevens-zone.net>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Replace short statement in comment with proper SPDX license tag.

Note, for i2c-desingware-slave.c the identifier is chosen
in accordance with MODULE_LICENSE() macro since it is visible to user.
Another point to this choice is that the header seems to be copy'n'paste
from the other file of this very driver.
Acked-by: Luis Oliveira <Luis.Oliveira@synopsys.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Pull m68knommu updates from Greg Ungerer:
 "Only two changes.

  One cleans up warnings in the ColdFire DMA code, the other stubs out
  (with warnings) ColdFire clock api functions not normally used"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: Fix typos in Coldfire 5272 DMA debug code
  m68k: coldfire: Normalize clk API

Pull networking fixes from David Miller:

 1) Fix races in IPVS, from Tan Hu.

 2) Missing unbind in matchall classifier, from Hangbin Liu.

 3) Missing act_ife action release, from Vlad Buslov.

 4) Cure lockdep splats in ila, from Cong Wang.

 5) veth queue leak on link delete, from Toshiaki Makita.

 6) Disable isdn's IIOCDBGVAR ioctl, it exposes kernel addresses. From
    Kees Cook.

 7) RCU usage fixup in XDP, from Tariq Toukan.

 8) Two TCP ULP fixes from Daniel Borkmann.

 9) r8169 needs REALTEK_PHY as a Kconfig dependency, from Heiner
    Kallweit.

10) Always take tcf_lock with BH disabled, otherwise we can deadlock
    with rate estimator code paths. From Vlad Buslov.

11) Don't use MSI-X on RTL8106e r8169 chips, they don't resume properly.
    From Jian-Hong Pan.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits)
  ip6_vti: fix creating fallback tunnel device for vti6
  ip_vti: fix a null pointer deferrence when create vti fallback tunnel
  r8169: don't use MSI-X on RTL8106e
  net: lan743x_ptp: convert to ktime_get_clocktai_ts64
  net: sched: always disable bh when taking tcf_lock
  ip6_vti: simplify stats handling in vti6_xmit
  bpf: fix redirect to map under tail calls
  r8169: add missing Kconfig dependency
  tools/bpf: fix bpf selftest test_cgroup_storage failure
  bpf, sockmap: fix sock_map_ctx_update_elem race with exist/noexist
  bpf, sockmap: fix map elem deletion race with smap_stop_sock
  bpf, sockmap: fix leakage of smap_psock_map_entry
  tcp, ulp: fix leftover icsk_ulp_ops preventing sock from reattach
  tcp, ulp: add alias for all ulp modules
  bpf: fix a rcu usage warning in bpf_prog_array_copy_core()
  samples/bpf: all XDP samples should unload xdp/bpf prog on SIGTERM
  net/xdp: Fix suspicious RCU usage warning
  net/mlx5e: Delete unneeded function argument
  Documentation: networking: ti-cpsw: correct cbs parameters for Eth1 100Mb
  isdn: Disable IIOCDBGVAR
  ...