Fix a race which was identified by Daniel McNeil <daniel@osdl.org>

If a buffer_head is under I/O due to JBD's ordered data writeout (which uses
ll_rw_block()) then either filemap_fdatawrite() or filemap_fdatawait() need
to wait on the buffer's existing I/O.

Presently neither will do so, because __block_write_full_page() will not
actually submit any I/O and will hence not mark the page as being under
writeback.

The best-performing fix would be to somehow mark the page as being under
writeback and defer waiting for the ll_rw_block-initiated I/O until
filemap_fdatawait()-time.  But this is hard, because in
__block_write_full_page() we do not have control of the buffer_head's end_io
handler.  Possibly we could make JBD call into end_buffer_async_write(), but
that gets nasty.

This patch makes __block_write_full_page() wait for any buffer_head I/O to
complete before inspecting the buffer_head state.  It only does this in the
case where __block_write_full_page() was called for a "data-integrity" write:
(wbc->sync_mode != WB_SYNC_NONE).

Probably it doesn't matter, because kjournald is currently submitting (or has
already submitted) all dirty buffers anyway.

From: Badari Pulavarty, Suparna Bhattacharya, Andrew Morton

Forward port of Stephen Tweedie's DIO fixes from 2.4, to fix various DIO vs
buffered IO exposures involving races causing:

(a) stale data from uninstantiated blocks to be read, e.g.

    - O_DIRECT reads against buffered writes to a sparse region

    - O_DIRECT writes to a sparse region against buffered reads

(b) potential data corruption with

    - O_DIRECT IOs against truncate

    due to writes to truncated blocks (which may have been reallocated to
    another file).

Summary of fixes:

1) All the changes affect only regular files.  RAW/O_DIRECT on block are
   unaffected. 

2) The DIO code will not fill in sparse regions on a write.  Instead
   -ENOTBLK is returned and the generic file write code would fallthrough to
   buffered IO in this case followed by writing through the pages to disk
   using filemap_fdatawrite/wait.

3) i_sem is held during both DIO reads and writes.  For reads, and writes
   to already allocated blocks, it is released right after IO is issued,
   while for writes to newly allocated blocks (e.g file extending writes and
   hole overwrites) it is held all the way through until IO completes (and
   data is committed to disk).

4) filemap_fdatawrite/wait are called under i_sem to synchronize buffered
   pages to disk blocks before issuing DIO.

5) A new rwsem (i_alloc_sem) is held in shared mode all the while a DIO
   (read or write) is in progress, and in exclusive mode by truncate to guard
   against deallocation of data blocks during DIO. 

6) All this new locking has been pushed down into blockdev_direct_IO to
   avoid interfering with NFS direct IO.  The locks are taken in the order
   i_sem followed by i_alloc_sem.  While i_sem may be released after IO
   submission in some cases, i_alloc_sem is held through until dio_complete
   (in the case of AIO-DIO this happens through the IO completion callback).

7) i_sem and i_alloc_sem are not held for the _nolock versions of write
   routines, as used by blockdev and XFS.  Filesystems can specify the
   needs_special_locking parameter to __blockdev_direct_IO from their direct
   IO address space op accordingly.

Note from Badari:
Here is the locking (when needs_special_locking is true):

(1) generic_file_*_write() holds i_sem (as before) and calls
    ->direct_IO().  blockdev_direct_IO gets i_alloc_sem and call
    direct_io_worker().

(2) generic_file_*_read() does not hold any locks.  blockdev_direct_IO()
    gets i_sem and then i_alloc_sem and calls direct_io_worker() to do the
    work

(3) direct_io_worker() does the work and drops i_sem after submitting IOs
    if appropriate and drops i_alloc_sem after completing IOs.

From: Matt Mackall <mpm@selenic.com>

From: Zwane Mwaikambo <zwane@arm.linux.org.uk>

This enables deep powersaving mode on Geode boxes.

From: Matt Mackall <mpm@selenic.com>

drop quota array in inode struct if no quota support

From: Matt Mackall <mpm@selenic.com>

The nswap and cnswap variables counters have never been incremented as
Linux doesn't do task swapping.

From: Matt Mackall <mpm@selenic.com>

Make CONFIG_EMBEDDED description more accurate

From: Christoph Hellwig <hch@lst.de>

the maintainer doesn't response unfortauntely, but removing these from
net_devices unconditionally is the 2.6 way to go, there's no more module
refcounting on net devices.

From: "Luiz Fernando N. Capitulino" <lcapitulino@prefeitura.sp.gov.br>

sound/oss/wavfront.c: At top level:
sound/oss/wavfront.c:2498: warning: `errno' defined but not used

From: Christoph Hellwig <hch@lst.de>

Kill magic ide/sound makedev scripts in scripts/.  The userland MAKEDEV is
the proper place and already has support for them.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

Just found an small bug in pgalloc for s390*.  Comparing notes with other
architectures I found that pte_alloc_one is sick for alpha and sparc64 as
well.

From: Stephen Smalley <sds@epoch.ncsc.mil>

This patch fixes the type of the ssec pointer in the sk_free_security
function.  This has no current impact as the magic element is the top of each
structure.  Thanks to Chad Hanson of TCS for discovering the bug and
submitting the patch.

From: "Luiz Fernando N. Capitulino" <lcapitulino@prefeitura.sp.gov.br>

drivers/media/dvb/frontends/stv0299.c:356: warning: unused variable `i'

From: "Nguyen, Tom L" <tom.l.nguyen@intel.com>

Adds MSI support for ia64.

- Modified existing code in drivers/pci/msi.c and drivers/pci/msi.h to
  include MSI support on IA64 platform.

- Based on the comments received from Zwane Mwaikambo and David Mosberger,
  this patch consolidates the vector allocators as
  assign_irq_vector(AUTO_ASSIGN) has the same semantics as
  ia64_alloc_vector() by converting the existing uses of ia64_alloc_vector()
  to assign_irq_vector(AUTO_ASSIGN).

- Based on the comments received from Zwane Mwaikambo, this patch
  consolidates the semantics of vector allocator assign_irq_vector() in
  drivers/pci/msi.c into the relevant architecture's vector allocator
  assign_irq_vector() in arch/i386/kernel/io_apic.c.

- Regarding vector allocation, this patch modifies the existing function
  assign_irq_vector() to maximize the number of allocated vectors to 188
  before going -ENOSPC.

- Based on your comments, this patch creates <asm-i386/msi.h>,
  <asm-ia64/msi.h> and <asm-x86_64/msi.h>, includes <asm/msi.h> from within
  drivers/pci/msi.h and then places all the code which is currently under
  ifdef in msi.h into the relevant architecture's <asm/msi.h> file.

- Based on your comments, this patch places pci_vector_resources() in
  existing drivers/pci/msi.c in the relevant architecture implementations
  such as into arch/.../pci/irq.c.

From: James Cleverdon <jamesclv@us.ibm.com>

Bump up MAX_MP_BUSSES for summit/generic subarch to cope with big IBM x440
systems.

From: James Cleverdon <jamesclv@us.ibm.com>

Break out the definition of NR_IRQ_VECTORS, etc from irq_vectors.h into
irq_vectors_limits.h, so we can change it per subarch without having code
duplication for the rest of the file.  Stick the same values back for
mach-default, and override them for mach-summit/generic which needs bigger
limits.

From: Rusty Russell <rusty@rustcorp.com.au>

Agustin Martin <agmartin@debian.org> pointed out that this doesn't work:

	options ide-mod options="ide=nodma hdc=cdrom"

The quotes are understood by kernel/params.c (ie.  it skips over spaces
inside them), but are not stripped before handing to the underlying
function.  They should be.

From: Hugh Dickins <hugh@veritas.com>

Kevin P.  Fleming pointed out that the 2.6 tmpfs does not allow writing huge
sparse files.  This is an unintended side-effect of the strict memory commit
changes: which should make no difference.

The solution is to treat the tmpfs files (of variable size) and the shmem
objects (of fixed size) differently: sounds nasty but works out well.  The
shmem objects follow the VM preallocation convention as before, but the tmpfs
files revert to allocation on demand as a filesystem would.  If there's not
enough memory to write to a tmpfs hole, it is reported as -ENOSPC rather than
-ENOMEM, so the mmap writer gets SIGBUS rather than everyone else getting
OOM-killed.

From: William Lee Irwin III <wli@holomorphy.com>

Chang bitmap_shift_left()/bitmap_shift_right() to have O(1) stackspace
requirements.

Given zeroed tail preconditions these implementations satisfy zeroed tail
postconditions, which makes them compatible with whatever changes from Paul
Jackson one may want to merge in the future.  No particular effort was
required to ensure this.

A small (but hopefully forgiveable) cleanup is a spelling correction:
s/bitmap_shift_write/bitmap_shift_right/ in one of the kerneldoc comments.

The primary effect of the patch is to remove the MAX_BITMAP_BITS
limitation, so restoring the NR_CPUS to be limited only by stackspace and
slab allocator maximums.  They also look vaguely more efficient than the
current code, though as this was not done for performance reasons, no
performance testing was done.

From: Marcelo Tosatti <marcelo.tosatti@cyclades.com>

From: Alain Knaff <alain.knaff@lll.lu>

This patch adds support for floppy disks whose sectors are numbered
starting at 0 rather than 1 as usual disks would be.  This format is used
for some CP/M disks, and also for certain music samplers (such as Ensoniq
Ensoniq EPS 16plus).

In order to use it, you need an fdutils with the current patch from
http://fdutils.linux.lu as well, and then do setfdrpm /dev/fd0 dd zerobased
sect=10 or setfdprm /dev/fd0 hd zerobased sect.

In addtion, the patch also fixes my email addresses.  I no longer use
pobox.com.

From: Rusty Russell <rusty@rustcorp.com.au>

Brian Gerst's patch which moved __this_module out from module.h into the
module post-processing had a side effect.  genksyms didn't see the
undefined symbols for modules without a module_init (or module_exit), and
hence didn't generate a version for them, causing the kernel to be tainted.

The simple solution is to always include the versions for these functions. 
Also includes two cleanups:

1) alloc_symbol is easier to use if it populates ->next for us.

2) add_exported_symbol should set owner to module, not head of module
   list (we don't use this field in entries in that list, fortunately).

From: Brian Gerst <bgerst@didntduck.org>

Move the __this_module structure to the modpost code where it really
belongs.

Eric Dumazet <dada1@cosmosbay.com>

We can avoid evaluating `current' in a few places.

From: Heiko Ronsdorf <hero@persua.de>

- Remvoe a volatile which causes a warning via module_param()

- Remove an unused variable.

From: David Mosberger <davidm@napali.hpl.hp.com>

Somebody recently pointed out a performance-anomaly to me where an unusual
amount of time was being spent reading from /dev/urandom.  The problem
isn't really surprising as it happened only on >= 4-way machines and the
random driver isn't terribly scalable the way it is written today.  If
scalability _really_ mattered, I suppose per-CPU data structures would be
the way to go.  However, I found that at least for 4-way machines,
performance can be improved considerably with the attached patch.  In
particular, I saw the following performance on a 4-way ia64 machine:

Test: 3 tasks running "dd if=/dev/urandom of=/dev/null bs=1024":

			throughput:
			

From: Mike Waychison <Michael.Waychison@Sun.COM>

Export complete_all for module use.

From: Arjan van de Ven <arjanv@redhat.com>

The patch below adds a few missing put_user()'s to the i810/i830 drm
modules.  Users reported oopses with 4g/4g split in action, and sparse
annotations indeed found the offender in the function in question.  I've
kept the sparse __user annotations since those are generally useful anyway.
 I can't test it myself but a few people reported that the oopses went away
so far.

From: Trivial Patch Monkey <trivial@rustcorp.com.au>

From:  Thomas Molina <tmolina@cablespeed.com>

From: Rusty Russell <rusty@rustcorp.com.au>

These macros are redefined here.  Previously definitions are in
asm-ppc(64)/io.h

From: Rusty Russell <rusty@rustcorp.com.au>

From: maximilian attems <janitor@sternwelten.at>

Add the Monkey to SubmittingPatches.

From: Rusty Russell <rusty@rustcorp.com.au>

From:  colpatch@us.ibm.com

The cpu_2_node[] array for i386 is initialized to all 0's, meaning that
until modified at CPU bring-up, all CPUs are mapped to node 0.

When CPUs are brought online, they are mapped to the appropriate node by
various mechanisms, depending on the underlying hardware.

When we unmap CPUs (hotplug time), we should return the mapping for the CPU
that is going away to its original state, ie: 0.

When this code was initially submitted, the misguided poster (me) made the
mistake of putting a -1 in the cpu_2_node[] array for the CPU going away.

This patch fixes this mistake, and allows code to get a valid node number
for all valid CPU numbers.  This is important, because most (if not all)
callers do not error check the value returned by the cpu_to_node() macro,
and they should not have to.  The API specifies that a valid node number be
returned for any valid CPU number.

From: Rusty Russell <rusty@rustcorp.com.au>

include/linux/device.h includes include/linux/ioport.h twice.

From: Rusty Russell <rusty@rustcorp.com.au>

From:  Thomas Molina <tmolina@cablespeed.com>

From: Rusty Russell <rusty@rustcorp.com.au>

From:  Stewart Smith <stewart@linux.org.au>

A better explanation of the X86_GENERIC config option follows.

From: Rusty Russell <rusty@rustcorp.com.au>

From: Andreas Schwab <schwab@suse.de> I'm getting a warning when building
for ia64 with MODVERSIONS enabled.  This is a bug in genksyms, it can't
cope with some arguments of __typeof__.

The following patch will fix that.  Actually the argument of __typeof__ is
an abstract declarator, but the genksyms parser has no production for that;
decl_specifier_seq also matches some invalid constructs, but I don't think
this is a problem in practice, since the compiler will reject them.

From: Rusty Russell <rusty@rustcorp.com.au>

From:  Petri Koistinen <petri.koistinen@iki.fi>

From: Rusty Russell <rusty@rustcorp.com.au>

From:  Pavel Machek <pavel@ucw.cz>

sysfs should be mounted on /sys these days.

From: Rusty Russell <rusty@rustcorp.com.au>

From:  Josef 'Jeff' Sipek <jeffpc@optonline.net>

I just noticed the nested ifdefs, and made it little more readable.

From: Rusty Russell <rusty@rustcorp.com.au>

From:  John Levon <levon@movementarian.org>

From: Rusty Russell <rusty@rustcorp.com.au>

From:  Hans Ulrich Niedermann <linux-kernel@n-dimensional.de>

doc patch: close tag with ">"

From: Rusty Russell <rusty@rustcorp.com.au>

From:  Hans Ulrich Niedermann <linux-kernel@n-dimensional.de>

doc patch: Consistently use quotes for SGML attributes This makes it
possible to process the SGML files without SHORTTAG YES.