- 14 Apr, 2023 1 commit
-
-
David Lin authored
Change the original fixed delay to the assignment from property. It will make more flexible to different platforms for avoiding pop noise at the beginning of recording. Signed-off-by:
David Lin <CTLIN0@nuvoton.com> Link: https://lore.kernel.org/r/20230414103941.39566-1-CTLIN0@nuvoton.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 13 Apr, 2023 2 commits
-
-
Christophe JAILLET authored
Use devm_clk_get_optional() instead of hand writing it. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/51976b2515d7007ba5c8aa7524892f147d7cdd51.1681363691.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
David Rau authored
- Configure the default gound switch delay time before enabling IRQ to avoid the unexpected delay time is set up - Apply DA7219 AAD own work queue to handle AAD events - Replace msleep with queue_delayed_work to have better relability This commit improves the control of ground switches in AAD IRQ Signed-off-by:
David Rau <David.Rau.opensource@dm.renesas.com> Link: https://lore.kernel.org/r/20230413024134.8612-1-David.Rau.opensource@dm.renesas.comSigned-off-by:
-
- 12 Apr, 2023 13 commits
-
-
Mark Brown authored
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>: This set of patches adds handling for system suspend. Patches 1..4 make some code changes that simplify the suspend implementation, mainly to avoid race conditions. There are two seperate aspects to suspend, and these have been done as two patches: - the main suspend-resume handling, - re-loading the firmware if necessary after resume.
-
Richard Fitzgerald authored
Check during cs35l56_system_resume() whether the firmware patch must be applied again. The FIRMWARE_MISSING flag in the PROTECTION_STATUS register indicates whether the firmware has been patched. In non-secure mode the FIRMWARE_MISSING flag is cleared at the end of dsp_work(). If it is set after system-resume we know that dsp_work() must be run again. In secure mode the pre-OS loader will have done the secure patching and cleared the FIRMWARE_MISSING flag. So this flag does not tell us whether firmware memory was lost. But the driver could only be downloading non-secure tunings, which is always safe to do. If the driver has control of RESET we will have asserted it during suspend so the firmware patch will have been lost. The driver would only have control of RESET in non-secure mode. Signed-off-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/168122674550.26.8545058503709956172@mailman-core.alsa-project.orgSigned-off-by:
-
Richard Fitzgerald authored
Delete the 'removing' flag and don't kick init_completion to make a quick cancel of dsp_work(). Just let it timeout on the wait for the completion. Simplify the code to standard cancelling or flushing of the work. This avoids introducing corner cases from a layer of custom signalling. It also avoids potential race conditions when system-suspend handling is added. Unless the hardware is broken, the dsp_work() will already have started and passed the completion before the driver would want to cancel it. Signed-off-by:
-
Richard Fitzgerald authored
This adds the main handling for system suspend but does not handle re-patching the firmware after system resume. This is a multi-stage suspend and resume because if there is a RESET line it is almost certain that it will be shared by all the amps. So every amp must have done its suspend before we can assert RESET. Likewise we must de-assert RESET before the amps can resume. It's preferable to assert RESET before we turning off regulators, and while they power up. The actual suspend and resume is done by using the pair pm_runtime_force_suspend() and pm_runtime_force_resume() to re-use our runtime suspend/resume sequences. pm_runtime_force_suspend() will disable our pm_runtime. If we were runtime-resumed it calls our runtime_suspend(). pm_runtime_force_resume() re-enables pm_runtime and if we were originally runtime-resumed before the pm_runtime_force_suspend() it calls our runtime_resume(). Otherwise it leaves us runtime-suspended. The general process is therefore: suspend() -> finish dsp_work and then run our runtime_suspend suspend_late() -> assert RESET and turn off supplies resume_early() -> enable supplies and de-assert RESET resume() -> pm_runtime_force_resume() In addition, to prevent the IRQ handler running in the period between pm_runtime_force_suspend() and pm_runtime_force_resume() the parent IRQ is temporarily disabled: - from suspend until suspend_noirq - from resume_noirq until resume Signed-off-by:
-
Richard Fitzgerald authored
When we are resuming from a system suspend the CS35L56 has probably been hard reset (usually a power-on reset). So we must wait for the firmware to boot. On SoundWire we also need it to re-initialize before we can read the registers to check the CS35L56 state. The simplest way to handle this is for runtime-resume to always wait for firmware boot. If the firmware is already booted the overhead is only one register read. The system-resume will have to runtime-resume the driver anyway before attempting any register access. So this will automatically include the wait for initialization on SoundWire. Signed-off-by:
-
Richard Fitzgerald authored
At the start of dsp_work() only wait for init_completion if !init_done. This allows system suspend to re-queue dsp_work() without having to do a dummy complete() of init_completion. A dummy completion in system suspend would have to be conditional on init_done. But that would create a possible race condition between our system resume and cs35l56_init() in the corner case that we suspend right after the SoundWire core has enumerated and reported ATTACHED. It is safer and simpler to have cs35l56_init() as the only place that init_completion is completed, and dsp_work() as the only place that it is consumed. Signed-off-by:
-
Richard Fitzgerald authored
If we use a DAPM widget instead of mute_stream() to send the PLAY command we can issue the plays to multiple amps in parallel. With mute_stream each codec driver instance is called one at a time so we get N * PS0 delay time. DAPM does each stage on every widget in a card before moving to the next stage. So all amps will do the PRE_PMU then all will do the POST_PMU. The PLAY is sent in the PRE_PMU so that they all power-up in parallel. After the PS0 wait in the first POST_PMU all the other amps will also be ready so there won't be any extra delay, or it will be negligible. There's also no point waiting for the MBOX ack in the PRE_PMU. We won't see a PS0 state in POST_PMU if it didn't ack the PLAY command. So we can save a little extra time. Signed-off-by:
-
Alexander Sverdlin authored
Add the new cirrus,ep9301-ac97 and cirrus,ep9301-i2s compatibles. Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/20230411165951.2335899-2-alexander.sverdlin@gmail.comSigned-off-by:
-
Alexander Sverdlin authored
Add device tree bindings for Cirrus Logic EP93xx internal SoCs' I2S controller. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230411165951.2335899-1-alexander.sverdlin@gmail.comSigned-off-by:
-
Syed Saba Kareem authored
We have SOF and generic ACP support enabled for Rembrandt and pheonix platforms on some machines. Since we have same PCI id used for probing, add check for machine configuration flag to avoid conflict with newer pci drivers. Such machine flag has been initialized via dmi match on few Chrome machines. If no flag is specified probe and register older platform device. Signed-off-by:
Syed Saba Kareem <Syed.SabaKareem@amd.com> Reviewed-by:
Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20230412091638.1158901-1-Syed.SabaKareem@amd.comSigned-off-by:
-
Ying Liu authored
Smatch complains that missing unwind goto in tas5720_codec_probe. When tas5720 has an invalid devtype, it is expected to invoke regulator_bulk_disable to handle the failure. But the default option return an error code directly. Fix it by reusing the probe_fail label. Signed-off-by:
Ying Liu <lyre@hust.edu.cn> Link: https://lore.kernel.org/r/20230411170912.1939906-1-lyre@hust.edu.cnSigned-off-by:
-
Fred Oh authored
The patch to make DSPless mode work even if the DSP is disabled in BIOS missed to touch the MTL code to add the needed checks. If the DSP is disabled this can lead to page fault due to not accesible registers. Fixes: 9fc6786f ("ASoC: SOF: Intel: hda: make DSPless mode work with DSP disabled in BIOS") Signed-off-by:
Fred Oh <fred.oh@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20230412061457.27937-1-peter.ujfalusi@linux.intel.comSigned-off-by:
-
Baishan Jiang authored
ThinkBook 14 G5+ ARP uses Ryzen 7735H processor, and has the same microphone problem as ThinkBook 14 G4+ ARA. Adding 21HY to acp6x quirks table enables microphone for ThinkBook 14 G5+ ARP. Signed-off-by:
Baishan Jiang <bjiang400@outlook.com> Link: https://lore.kernel.org/r/OS3P286MB1711DD6556284B69C79C0C4FE19B9@OS3P286MB1711.JPNP286.PROD.OUTLOOK.COMSigned-off-by:
-
- 11 Apr, 2023 10 commits
-
-
Mark Brown authored
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>: The following series adds the core support to handle the recently updated HDaudio multi-link support to hanlde non HDA links, like SoundWire/DMIC/SSP on Intel platform. For details, please see the first patch which documents the current mlink support (introduced at Skylake) and the new extensions, arriving with LNL. There is no change in functionality for existing HDA support, the extension is backwards compatible with existing implementations.
-
Saalim Quadri authored
Convert the WM8523 audio CODEC bindings to DT schema Signed-off-by:
Saalim Quadri <danascape@gmail.com> Link: https://lore.kernel.org/r/20230405203419.5621-1-danascape@gmail.comSigned-off-by:
-
Saalim Quadri authored
Convert the WM8711 audio CODEC bindings to DT schema Signed-off-by:
-
Saalim Quadri authored
Convert the WM8580 and WM8581 audio CODEC bindings to DT schema Signed-off-by:
-
Mark Brown authored
Merge series from Alexander Sverdlin <alexander.sverdlin@gmail.com>: This is a preparatory series for EP93xx transition to DT. This patchset is a pre-requisite and has been tested with the full DT patchset [1]. [1]. git://git.maquefel.me/linux.git branch ep93xx/6.2-rc4-v0 Alexander Sverdlin (3): ASoC: ep93xx: i2s: move enable call to startup callback ASoC: cs4271: flat regcache, trivial simplifications ASoC: ep93xx: i2s: Make it individually selectable sound/soc/cirrus/Kconfig | 6 +++++- sound/soc/cirrus/ep93xx-i2s.c | 12 +++++++++++- sound/soc/codecs/cs4271-i2c.c | 1 - sound/soc/codecs/cs4271-spi.c | 1 - sound/soc/codecs/cs4271.c | 4 ++-- 5 files changed, 18 insertions(+), 6 deletions(-) -- 2.40.0
-
Aashish Sharma authored
Add missing of_node_put()s before the returns to balance of_node_get()s and of_node_put()s, which may get unbalanced in case the for loop 'for_each_available_child_of_node' returns early. Fixes: 4302187d ("ASoC: mediatek: common: add soundcard driver common code") Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Julia Lawall <julia.lawall@inria.fr> Link: https://lore.kernel.org/r/202304090504.2K8L6soj-lkp@intel.com/Signed-off-by:
Aashish Sharma <shraash@google.com> Reviewed-by:
Guenter Roeck <groeck@chromium.org> Reviewed-by:
Trevor Wu <trevor.wu@mediatek.com> Link: https://lore.kernel.org/r/20230411003431.4048700-1-shraash@google.comSigned-off-by:
-
Cem Kaya authored
Add Dell G15 5525 Ryzen Edition to quirks list for acp6x so that internal mic works. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217155Signed-off-by:
Cem Kaya <cemkaya.boun@gmail.com> Link: https://lore.kernel.org/r/20230410183814.260518-1-cemkaya.boun@gmail.comSigned-off-by:
-
Alexander Sverdlin authored
This is necessary to replace EDB93XX specific SoC audio driver with generic "simple-audio-card". Signed-off-by:
-
Alexander Sverdlin authored
- Switch to REGCACHE_FLAT, the whole overhead of RBTREE is not worth it with non sparse register set in the address range 1..7. - Move register width to central location Signed-off-by:
-
Alexander Sverdlin authored
Make startup/shutdown callbacks symmetric to avoid clock subsystem warnings (reproduced with "aplay --dump-hw-params" + ctrl-c): WARNING: CPU: 0 PID: 102 at drivers/clk/clk.c:1048 clk_core_disable lrclk already disabled CPU: 0 PID: 102 Comm: aplay Not tainted 6.2.0-rc4 #1 Hardware name: Generic DT based system ... clk_core_disable from clk_core_disable_lock clk_core_disable_lock from ep93xx_i2s_shutdown ep93xx_i2s_shutdown from snd_soc_dai_shutdown snd_soc_dai_shutdown from soc_pcm_clean soc_pcm_clean from soc_pcm_close soc_pcm_close from snd_pcm_release_substream.part.0 snd_pcm_release_substream.part.0 from snd_pcm_release snd_pcm_release from __fput __fput from task_work_run ... WARNING: CPU: 0 PID: 102 at drivers/clk/clk.c:907 clk_core_unprepare lrclk already unprepared CPU: 0 PID: 102 Comm: aplay Tainted: G W 6.2.0-rc4 #1 Hardware name: Generic DT based system ... clk_core_unprepare from clk_unprepare clk_unprepare from ep93xx_i2s_shutdown ep93xx_i2s_shutdown from snd_soc_dai_shutdown snd_soc_dai_shutdown from soc_pcm_clean soc_pcm_clean from soc_pcm_close soc_pcm_close from snd_pcm_release_substream.part.0 snd_pcm_release_substream.part.0 from snd_pcm_release snd_pcm_release from __fput __fput from task_work_run ... Signed-off-by:
-
- 07 Apr, 2023 2 commits
-
-
Krzysztof Kozlowski authored
The yamllint expect comments to start with hash and space ('# '), so quote the description to fix: asahi-kasei,ak4458.yaml:40:30: [error] missing starting space in comment (comments) Reported-by:Rob Herring <robh@kernel.org> Closes: https://lore.kernel.org/all/CAL_JsqJzxQb1g=yVgHduLnYOpk8-Q3jppA1qQT1Ce51_gNWjhg@mail.gmail.com/ Fixes: 009e83b5 ("ASoC: dt-bindings: ak4458: Convert to dtschema") Signed-off-by:
-
Tom Rix authored
smatch reports sound/soc/mediatek/mt8186/mt8186-afe-gpio.c:14:16: warning: symbol 'aud_pinctrl' was not declared. Should it be static? This variable is only used in one file so should be static. Signed-off-by:
Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20230407115553.1968111-1-trix@redhat.comSigned-off-by:
-
- 06 Apr, 2023 12 commits
-
-
Peter Ujfalusi authored
The format_val is a set of bitfileds, printing it as a decimal just makes interpreting it complicated. In other HDA core code the format_val is printed as hexadecimal also. Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
Jaska Uimonen <jaska.uimonen@linux.intel.com> Reviewed-by:
-
Yong Zhi authored
Wake IO1 from power gating if there is SoundWire enabled link discovered by ACPI scan. Signed-off-by:
Yong Zhi <yong.zhi@intel.com> Signed-off-by:
-
Curtis Malainey authored
Boards were using this in older kernels before adl and rpl ids were split. Add this back to maintain support. Signed-off-by:
Curtis Malainey <cujomalainey@chromium.org> Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20230406153703.17194-1-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
For SoundWire usages, we need to use the global eml_lock to serialize/protect all accesses to shared registers. Due to the split implementation across two subsystems, we need to pass a pointer around. Signed-off-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20230404104127.5629-19-peter.ujfalusi@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
For DMIC and SSP, the DSP will be responsible for programming the blobs and link registers. Signed-off-by:
-
Pierre-Louis Bossart authored
Small helpers to make DAI ops simpler. Signed-off-by:
-
Pierre-Louis Bossart authored
Each SoundWire peripheral can be programmed from the manager side either with a regular command FIFO, or with the HDaudio CORB/RIRB DMA-based mechanism. The mapping between SoundWire peripheral and SDI address is handled with the LSDIID register. This mapping only works of course if each peripheral has a unique address across all links. This has already been enforced in previous Intel contributions allowing for an IDA-based solution for the device number allocation. The checks on the dev_num are handled at the SoundWire level, but the locking is handled at the hda-mlink level. Signed-off-by:
-
Pierre-Louis Bossart authored
This helper is an optimization where sync_go is only called when the cmdsync field is actually set to a non-zero value. Since this is also only used by SoundWire for now, only expose the _unlocked version. Signed-off-by:
-
Pierre-Louis Bossart authored
The multi-link synchronization uses the same concept and registers, but moved to the HDAudio extended links. Add helpers for sync_arm and sync_go which are the basic for the bus reset, bank switch and clock stop. Since SoundWire is the only user of those helpers, only expose the _unlocked versions for now. Note that SYNCGO is a write-only bit, so no error can be reported. We still return 0 for compatibility with the SoundWire stream management headers. Signed-off-by:
-
Pierre-Louis Bossart authored
These helpers configure the ratio between the base clock and the hardware signal used for link synchronization. The SYNCPRD is written before the first sublink is powered-up. The SYNCPU bit is set, but it will only be cleared after the link is powered-up, hence the implementation with a set/wait pattern. These helpers are currently only needed by SoundWire support, where the lock is taken at a higher level, so only the _unlocked versions are exposed for now. Note that the _wait_bit() implementation is similar to previous helpers in drivers/soundwire, but with sleep duration and timeout aligned with hardware recommendations. If desired, this helper could be modified in a second step with e.g. readl_poll_timeout(). Signed-off-by:
-
Pierre-Louis Bossart authored
When INTC is set, LCTL exposes INTEN and INTSTS fields. Signed-off-by:
-
Pierre-Louis Bossart authored
This is needed for SoundWire integration. Signed-off-by:
-
