- 10 Jan, 2016 8 commits
-
-
Vinod Koul authored
When device enters active suspend, we should turn off the links as they are not in use. Similarly we need to bring back links when we exit active suspend. Signed-off-by: Jayachandran B <jayachandran.b@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Dharageswari.R authored
Per HW recommendation, SW shall clear the CGCTL.MISCBDCGE and set it back once data is transferred. So clear this when we get the IPC and track using a driver flag, and set back on closure Signed-off-by: Dharageswari.R <dharageswari.r@intel.com> Signed-off-by: Jayachandran B <jayachandran.b@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Jayachandran B authored
MISCBDCGE is a new register for Misc Backbone clock gate control which is useful to control while resetting the link and ensuring controller is in required state so add API to control it HW recommends that we reset with CGCTL.MISCBDCGE disabled, so add that while doing init chip and reset sequence. Signed-off-by: Jayachandran B <jayachandran.b@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Mark Brown authored
Merge branch 'topic/hdac' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
-
Vinod Koul authored
We have an API for powering down all links, we need a similar one for powering up links, so add for power up as well Signed-off-by: Jayachandran B <jayachandran.b@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Jayachandran B authored
HW recommends 180us for worst case values for link power up delay, so change the current delay value from 50 (150us) to 150 (450us) Signed-off-by: Jayachandran B <jayachandran.b@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Jeeja KP authored
A stream is by default in coupled mode, in DSP operation we move it to decoupled mode. On cleanup HW expects that we leave it back to default state so couple the DMA on cleanup. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Jeeja KP authored
Skylake sports new capability of DMA resume, DRSM where we can resume the DMA. This capability is defined by presence of AZX_DRSM_CAP_ID. If this capability is present, we use this capability. So we add: snd_hdac_ext_stream_drsm_enable() - DMA resume caps snd_hdac_ext_stream_set_dpibr() - set the DMA position snd_hdac_ext_stream_set_lpib() - set the lpib Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 08 Jan, 2016 2 commits
-
-
Subhransu S. Prusty authored
Future platforms may have a different set of pins/converters. So use lists to add pins and converters based on enumeration. Also it may be required to connect any converter to any pin dynamically as per different use cases (for example DP is connected to pin 6 on skylake board). So this will help in dynamically select and route. Fix the dai map as well to use the pin/cvt from list. Not enabling all dai maps for now. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Subhransu S. Prusty authored
It is possible that some pin widget may return with no converter connected. So don't throw error if none are found to be connected. Instead print a warning and continue. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 05 Jan, 2016 12 commits
-
-
Subhransu S. Prusty authored
commit 3c83ac23 ("ASoC: hdac_hdmi: check error return") fixes the static checker warning reported by Dan Carpenter: sound/soc/codecs/hdac_hdmi.c:416 hdac_hdmi_parse_and_map_nid() warn: unsigned 'hdac->num_nodes' is never less than zero. But it doesn't fix the issue completely. It's also a failure if no sub nodes found for an afg node. So modify the return condition appropriately. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Mark Brown authored
Merge branch 'fix/intel' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
-
Jorge Fernandez Monteagudo authored
The BIOS for the HP ElitePad 1000 G2 uses an unexpected HID, (INTCCFFD), add it to the white list of knowns HIDs. Signed-off-by: Jorge Fernandez Monteagudo <jorgefm@cirsa.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Pierre-Louis Bossart authored
The machine driver is not loaded when the BIOS uses the 10EC5642 _HID. Add it to the white list of known _HIDs, codec_name is already taken care of by previous commit Tested on Asus T100TAF. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Pierre-Louis Bossart authored
Codec name is hard-coded in machine driver, pass information from actual ACPI HID to help support BIOS variations Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Pierre-Louis Bossart authored
based on bytcr-rt5640 with changes only on codec side Quirk logic is kept as placeholder. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Pierre-Louis Bossart authored
The commit 95f09801 "ASoC: Intel: Move apci find machine routines" introduced a regression in ACPI probe of the DPCM driver. Fix by conditionally compiling sst-acpi when the DPCM driver is not selected Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Pierre-Louis Bossart authored
Sound is noisy when using BCLK as reference, enable ASRC in rt5640 codec Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Mark Brown authored
Merge branch 'topic/rt5640' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
-
Jack Yu authored
Signed-off-by: Jack Yu <jack.yu@realtek.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Vinod Koul authored
This provide the fix for firmware memory by freeing the pointer in driver remove where it is safe to do so Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Vinod Koul authored
This reverts commit 87b5ed8e ("ASoC: Intel: Skylake: fix memory leak") as it causes regression on Skylake devices The SKL drivers can be deferred probe. The topology file based widgets can have references to topology file so this can't be freed until card is fully created, so revert this patch for now [ 66.682767] BUG: unable to handle kernel paging request at ffffc900001363fc [ 66.690735] IP: [<ffffffff806c94dd>] strnlen+0xd/0x40 [ 66.696509] PGD 16e035067 PUD 16e036067 PMD 16e038067 PTE 0 [ 66.702925] Oops: 0000 [#1] PREEMPT SMP [ 66.768390] CPU: 3 PID: 57 Comm: kworker/u16:3 Tainted: G O 4.4.0-rc7-skl #62 [ 66.778869] Hardware name: Intel Corporation Skylake Client platform [ 66.793201] Workqueue: deferwq deferred_probe_work_func [ 66.799173] task: ffff88008b700f40 ti: ffff88008b704000 task.ti: ffff88008b704000 [ 66.807692] RIP: 0010:[<ffffffff806c94dd>] [<ffffffff806c94dd>] strnlen+0xd/0x40 [ 66.816243] RSP: 0018:ffff88008b707878 EFLAGS: 00010286 [ 66.822293] RAX: ffffffff80e60a82 RBX: 000000000000000e RCX: fffffffffffffffe [ 66.830406] RDX: ffffc900001363fc RSI: ffffffffffffffff RDI: ffffc900001363fc [ 66.838520] RBP: ffff88008b707878 R08: 000000000000ffff R09: 000000000000ffff [ 66.846649] R10: 0000000000000001 R11: ffffffffa01c6368 R12: ffffc900001363fc [ 66.854765] R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000000 [ 66.862910] FS: 0000000000000000(0000) GS:ffff88016ecc0000(0000) knlGS:0000000000000000 [ 66.872150] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 66.878696] CR2: ffffc900001363fc CR3: 0000000002c09000 CR4: 00000000003406e0 [ 66.886820] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 66.894938] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 66.903052] Stack: [ 66.905346] ffff88008b7078b0 ffffffff806cb1db 000000000000000e 0000000000000000 [ 66.913854] ffff88008b707928 ffffffffa00d1050 ffffffffa00d104e ffff88008b707918 [ 66.922353] ffffffff806ccbd6 ffff88008b707948 0000000000000046 ffff88008b707940 [ 66.930855] Call Trace: [ 66.933646] [<ffffffff806cb1db>] string.isra.4+0x3b/0xd0 [ 66.939793] [<ffffffff806ccbd6>] vsnprintf+0x116/0x540 [ 66.945742] [<ffffffff806d02f0>] kvasprintf+0x40/0x80 [ 66.951591] [<ffffffff806d0370>] kasprintf+0x40/0x50 [ 66.957359] [<ffffffffa00c085f>] dapm_create_or_share_kcontrol+0x1cf/0x300 [snd_soc_core] [ 66.966771] [<ffffffff8057dd1e>] ? __kmalloc+0x16e/0x2a0 [ 66.972931] [<ffffffffa00c0dab>] snd_soc_dapm_new_widgets+0x41b/0x4b0 [snd_soc_core] [ 66.981857] [<ffffffffa00be8c0>] ? snd_soc_dapm_add_routes+0xb0/0xd0 [snd_soc_core] [ 67.007828] [<ffffffffa00b92ed>] soc_probe_component+0x23d/0x360 [snd_soc_core] [ 67.016244] [<ffffffff80b14e69>] ? mutex_unlock+0x9/0x10 [ 67.022405] [<ffffffffa00ba02f>] snd_soc_instantiate_card+0x47f/0xd10 [snd_soc_core] [ 67.031329] [<ffffffff8049eeb2>] ? debug_mutex_init+0x32/0x40 [ 67.037973] [<ffffffffa00baa92>] snd_soc_register_card+0x1d2/0x2b0 [snd_soc_core] [ 67.046619] [<ffffffffa00c8b54>] devm_snd_soc_register_card+0x44/0x80 [snd_soc_core] [ 67.055539] [<ffffffffa01c303b>] skylake_audio_probe+0x1b/0x20 [snd_soc_skl_rt286] [ 67.064292] [<ffffffff808aa887>] platform_drv_probe+0x37/0x90 Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 04 Jan, 2016 1 commit
-
-
Geliang Tang authored
Use dev_to_hdac_dev() and to_ehdac_device() instead of open-coding. Signed-off-by: Geliang Tang <geliangtang@163.com> Reviewed-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 03 Jan, 2016 3 commits
-
-
Linus Torvalds authored
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS build fix from Ralf Baechle: "Fix a makefile issue resulting in build breakage with older binutils. This has sat in -next for a few days, testers and buildbot are happy with it, too though if you are going for another -rc that'd certainly help ironing out a few more issues" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: VDSO: Fix build error with binutils 2.24 and earlier
-
git://anongit.freedesktop.org/drm-intelLinus Torvalds authored
Pull i915 drm fixes from Jani Nikula: "Two display fixes still for v4.4. The new year's resolution is to start using signed tags per Linus' request. This one is still unsigned; I want to fix this up in our maintainer scripts instead of doing it one-off" * tag 'drm-intel-fixes-2016-01-02' of git://anongit.freedesktop.org/drm-intel: drm/i915: increase the tries for HDMI hotplug live status checking drm/i915: Unbreak check_digital_port_conflicts()
-
- 31 Dec, 2015 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI bugfix from Bjorn Helgaas: "Here's another fix for v4.4. This fixes 32-bit config reads for the HiSilicon driver. Obviously the driver is completely broken without this fix (apparently it actually was tested internally, but got broken somehow in the process of upstreaming it). Summary: HiSilicon host bridge driver Fix 32-bit config reads (Dongdong Liu)" * tag 'pci-v4.4-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: hisi: Fix hisi_pcie_cfg_read() 32-bit reads
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc fixes from David Miller: "Just some missing syscall wire ups" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Wire up mlock2 system call. sparc: Add all necessary direct socket system calls.
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Prevent XFRM per-cpu counter updates for one namespace from being applied to another namespace. Fix from DanS treetman. 2) Fix RCU de-reference in iwl_mvm_get_key_sta_id(), from Johannes Berg. 3) Remove ethernet header assumption in nft_do_chain_netdev(), from Pablo Neira Ayuso. 4) Fix cpsw PHY ident with multiple slaves and fixed-phy, from Pascal Speck. 5) Fix use after free in sixpack_close and mkiss_close. 6) Fix VXLAN fw assertion on bnx2x, from Yuval Mintz. 7) natsemi doesn't check for DMA mapping errors, from Alexey Khoroshilov. 8) Fix inverted test in ip6addrlbl_get(), from ANdrey Ryabinin. 9) Missing initialization of needed_headroom in geneve tunnel driver, from Paolo Abeni. 10) Fix conntrack template leak in openvswitch, from Joe Stringer. 11) Mission initialization of wq->flags in sock_alloc_inode(), from Nicolai Stange. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits) sctp: sctp should release assoc when sctp_make_abort_user return NULL in sctp_close net, socket, socket_wq: fix missing initialization of flags drivers: net: cpsw: fix error return code openvswitch: Fix template leak in error cases. sctp: label accepted/peeled off sockets sctp: use GFP_USER for user-controlled kmalloc qlcnic: fix a loop exit condition better net: cdc_ncm: avoid changing RX/TX buffers on MTU changes geneve: initialize needed_headroom ipv6: honor ifindex in case we receive ll addresses in router advertisements addrconf: always initialize sysctl table data ipv6/addrlabel: fix ip6addrlbl_get() switchdev: bridge: Pass ageing time as clock_t instead of jiffies sh_eth: fix 16-bit descriptor field access endianness too veth: don’t modify ip_summed; doing so treats packets with bad checksums as good. net: usb: cdc_ncm: Adding Dell DW5813 LTE AT&T Mobile Broadband Card net: usb: cdc_ncm: Adding Dell DW5812 LTE Verizon Mobile Broadband Card natsemi: add checks for dma mapping errors rhashtable: Kill harmless RCU warning in rhashtable_walk_init openvswitch: correct encoding of set tunnel action attributes ...
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
The GLIBC folks would like to eliminate socketcall support eventually, and this makes sense regardless so wire them all up. Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 30 Dec, 2015 9 commits
-
-
Xin Long authored
In sctp_close, sctp_make_abort_user may return NULL because of memory allocation failure. If this happens, it will bypass any state change and never free the assoc. The assoc has no chance to be freed and it will be kept in memory with the state it had even after the socket is closed by sctp_close(). So if sctp_make_abort_user fails to allocate memory, we should abort the asoc via sctp_primitive_ABORT as well. Just like the annotation in sctp_sf_cookie_wait_prm_abort and sctp_sf_do_9_1_prm_abort said, "Even if we can't send the ABORT due to low memory delete the TCB. This is a departure from our typical NOMEM handling". But then the chunk is NULL (low memory) and the SCTP_CMD_REPLY cmd would dereference the chunk pointer, and system crash. So we should add SCTP_CMD_REPLY cmd only when the chunk is not NULL, just like other places where it adds SCTP_CMD_REPLY cmd. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'wireless-drivers-for-davem-2015-12-28' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== iwlwifi * don't load firmware that won't exist for 7260 * fix RCU splat ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolai Stange authored
Commit ceb5d58b ("net: fix sock_wake_async() rcu protection") from the current 4.4 release cycle introduced a new flags member in struct socket_wq and moved SOCKWQ_ASYNC_NOSPACE and SOCKWQ_ASYNC_WAITDATA from struct socket's flags member into that new place. Unfortunately, the new flags field is never initialized properly, at least not for the struct socket_wq instance created in sock_alloc_inode(). One particular issue I encountered because of this is that my GNU Emacs failed to draw anything on my desktop -- i.e. what I got is a transparent window, including the title bar. Bisection lead to the commit mentioned above and further investigation by means of strace told me that Emacs is indeed speaking to my Xorg through an O_ASYNC AF_UNIX socket. This is reproducible 100% of times and the fact that properly initializing the struct socket_wq ->flags fixes the issue leads me to the conclusion that somehow SOCKWQ_ASYNC_WAITDATA got set in the uninitialized ->flags, preventing my Emacs from receiving any SIGIO's due to data becoming available and it got stuck. Make sock_alloc_inode() set the newly created struct socket_wq's ->flags member to zero. Fixes: ceb5d58b ("net: fix sock_wake_async() rcu protection") Signed-off-by: Nicolai Stange <nicstange@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Make the block layer great again. Basically three amazing fixes in this pull request, split into 4 patches. Believe me, they should go into 4.4. Two of them fix a regression, the third and last fixes an easy-to-trigger bug. - Fix a bad irq enable through null_blk, for queue_mode=1 and using timer completions. Add a block helper to restart a queue asynchronously, and use that from null_blk. From me. - Fix a performance issue in NVMe. Some devices (Intel Pxxxx) expose a stripe boundary, and performance suffers if we cross it. We took that into account for merging, but not for the newer splitting code. Fix from Keith. - Fix a kernel oops in lightnvm with multiple channels. From Matias" * 'for-linus' of git://git.kernel.dk/linux-block: lightnvm: wrong offset in bad blk lun calculation null_blk: use async queue restart helper block: add blk_start_queue_async() block: Split bios on chunk boundaries
-
Gary Wang authored
The total delay of HDMI hotplug detecting with 30ms is sometimes not enoughtfor HDMI live status up with specific HDMI monitors in BSW platform. After doing experiments for following monitors, it needs 80ms at least for those worst cases. Lenovo L246 1xwA (4 failed, necessary hot-plug delay: 58/40/60/40ms) Philips HH2AP (9 failed, necessary hot-plug delay: 80/50/50/60/46/40/58/58/39ms) BENQ ET-0035-N (6 failed, necessary hot-plug delay: 60/50/50/80/80/40ms) DELL U2713HM (2 failed, necessary hot-plug delay: 58/59ms) HP HP-LP2475w (5 failed, necessary hot-plug delay: 70/50/40/60/40ms) It looks like 70-80 ms is BSW platform needs in some bad cases of the monitors at this end (8 times delay at most). Keep less than 100ms for HDCP pulse HPD low (with at least 100ms) to respond a plug out. Reviewed-by: Cooper Chiou <cooper.chiou@intel.com> Tested-by: Gary Wang <gary.c.wang@intel.com> Cc: Gavin Hindman <gavin.hindman@intel.com> Cc: Sonika Jindal <sonika.jindal@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Shobhit Kumar <shobhit.kumar@intel.com> Signed-off-by: Gary Wang <gary.c.wang@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1450858295-12804-1-git-send-email-gary.c.wang@intel.comTested-by: Shobhit Kumar <shobhit.kumar@intel.com> Cc: drm-intel-fixes@lists.freedesktop.org Fixes: 237ed86c ("drm/i915: Check live status before reading edid") Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> (cherry picked from commit f8d03ea0) [Jani: undo the file mode change of the original commit] Signed-off-by: Jani Nikula <jani.nikula@intel.com>
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "9 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/vmstat: fix overflow in mod_zone_page_state() ocfs2/dlm: clear migration_pending when migration target goes down mm/memory_hotplug.c: check for missing sections in test_pages_in_a_zone() ocfs2: fix flock panic issue m32r: add io*_rep helpers m32r: fix build failure arch/x86/xen/suspend.c: include xen/xen.h mm: memcontrol: fix possible memcg leak due to interrupted reclaim ocfs2: fix BUG when calculate new backup super
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fix from Al Viro: "Fix for 3.15 breakage of fcntl64() in arm OABI compat. -stable fodder" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: [PATCH] arm: fix handling of F_OFD_... in oabi_fcntl64()
-
Heiko Carstens authored
mod_zone_page_state() takes a "delta" integer argument. delta contains the number of pages that should be added or subtracted from a struct zone's vm_stat field. If a zone is larger than 8TB this will cause overflows. E.g. for a zone with a size slightly larger than 8TB the line mod_zone_page_state(zone, NR_ALLOC_BATCH, zone->managed_pages); in mm/page_alloc.c:free_area_init_core() will result in a negative result for the NR_ALLOC_BATCH entry within the zone's vm_stat, since 8TB contain 0x8xxxxxxx pages which will be sign extended to a negative value. Fix this by changing the delta argument to long type. This could fix an early boot problem seen on s390, where we have a 9TB system with only one node. ZONE_DMA contains 2GB and ZONE_NORMAL the rest. The system is trying to allocate a GFP_DMA page but ZONE_DMA is completely empty, so it tries to reclaim pages in an endless loop. This was seen on a heavily patched 3.10 kernel. One possible explaination seem to be the overflows caused by mod_zone_page_state(). Unfortunately I did not have the chance to verify that this patch actually fixes the problem, since I don't have access to the system right now. However the overflow problem does exist anyway. Given the description that a system with slightly less than 8TB does work, this seems to be a candidate for the observed problem. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
xuejiufei authored
We have found a BUG on res->migration_pending when migrating lock resources. The situation is as follows. dlm_mark_lockres_migration res->migration_pending = 1; __dlm_lockres_reserve_ast dlm_lockres_release_ast returns with res->migration_pending remains because other threads reserve asts wait dlm_migration_can_proceed returns 1 >>>>>>> o2hb found that target goes down and remove target from domain_map dlm_migration_can_proceed returns 1 dlm_mark_lockres_migrating returns -ESHOTDOWN with res->migration_pending still remains. When reentering dlm_mark_lockres_migrating(), it will trigger the BUG_ON with res->migration_pending. So clear migration_pending when target is down. Signed-off-by: Jiufei Xue <xuejiufei@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-