- 29 May, 2023 4 commits
-
-
Stephan Gerhold authored
For some reason the BLSP UART controllers have a label with a number behind blsp (&blsp1_uartN) while I2C/SPI are named without (&blsp_i2cN). This is confusing, especially for proper node ordering in board DTs. Right now all board DTs are ordered as if the number behind blsp does not exist (&blsp_i2cN comes before &blsp1_uartN). Strictly speaking correct ordering would be the other way around ('1' comes before '_'). End this confusion by giving the UART controllers consistent labels. There is just one BLSP on MSM8916/39 so the number is redundant. Signed-off-by:Stephan Gerhold <stephan@gerhold.net> Reviewed-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by:
Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230525-msm8916-labels-v1-2-bec0f5fb46fb@gerhold.net
-
Stephan Gerhold authored
MSM8916 is the only ARM64 Qualcomm SoC that is still using the old &msmgpio name. Change this to &tlmm to avoid confusion. Note that the node ordering does not change because the MSM8916 device trees have pinctrl separated at the bottom (similar to sc7180). Signed-off-by:
-
Bhupesh Sharma authored
Enable the USB controller and HS/SS PHYs on qrb4210-rb2 board. Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by:
Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by:
-
Bhupesh Sharma authored
Add USB superspeed qmp phy node to dtsi. Make sure that the various board dts files (which include sm4250.dtsi file) continue to work as intended. Reviewed-by:
-
- 27 May, 2023 11 commits
-
-
Kathiravan T authored
Add the initial device tree support for the Reference Design Platform(RDP) 442 based on IPQ5332 family of SoC. This patch carries the support for Console UART, SPI NOR, eMMC and I2C. Signed-off-by:
Kathiravan T <quic_kathirav@quicinc.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Kathiravan T authored
Document the MI01.3 (Reference Design Platform 442) board based on IPQ5332 family of SoCs. Signed-off-by:
-
Jagadeesh Kona authored
Add device node for graphics clock controller on Qualcomm SM8550 platform. Signed-off-by:
Jagadeesh Kona <quic_jkona@quicinc.com> Signed-off-by:
-
Bjorn Andersson authored
Introduce DeviceTree bindings for SM8450 and SM8550 GPU clock controller, to introduce the constants necessary to referr to these clocks.
-
Jagadeesh Kona authored
Add device tree bindings for the graphics clock controller on Qualcomm SM8550 platform. Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
-
Konrad Dybcio authored
Add device tree bindings for the graphics clock controller on Qualcomm Technology Inc's SM8450 SoCs. Signed-off-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by:
-
Shazad Hussain authored
This enables the i2c11 node on sa8775p-ride board for A2B controller and audio port expander. Signed-off-by:
Shazad Hussain <quic_shazhuss@quicinc.com> Signed-off-by:
-
Shazad Hussain authored
Add remaining uart5 and uart9 nodes for UART bus present on sa8775p SoC. Signed-off-by:
-
Shazad Hussain authored
Add the missing nodes of the SPI buses present on sa8775p platform. Signed-off-by:
-
Shazad Hussain authored
Add the missing nodes for the i2c buses present on sa8775p Soc. Signed-off-by:
-
Shazad Hussain authored
Add zeroth and third instance of the QUPv3 engine to the sa8775p.dtsi. Signed-off-by:
-
- 26 May, 2023 25 commits
-
-
Krzysztof Kozlowski authored
Correct the typo in 'regulator-name' property. apq8096-ifc6640.dtb: v1p05-regulator: 'regulator-name' is a required property apq8096-ifc6640.dtb: v1p05-regulator: Unevaluated properties are not allowed ('reglator-name' was unexpected) Fixes: 6cbdec2d ("arm64: dts: qcom: msm8996: Introduce IFC6640") Signed-off-by: -
Krzysztof Kozlowski authored
Re-order the clocks for MMCC clock controller node to match the bindings (Linux driver takes by name): msm8996-mtp.dtb: clock-controller@8c0000: clock-names:1: 'gpll0' was expected msm8996-mtp.dtb: clock-controller@8c0000: clock-names:2: 'gcc_mmss_noc_cfg_ahb_clk' was expected Signed-off-by:
-
Krzysztof Kozlowski authored
Re-order the clocks for LPASS CPU node to match the bindings (Linux driver takes by name): msm8916-asus-z00l.dtb: audio-controller@7708000: clock-names:1: 'mi2s-bit-clk0' was expected msm8916-asus-z00l.dtb: audio-controller@7708000: clock-names:2: 'mi2s-bit-clk1' was expected msm8916-asus-z00l.dtb: audio-controller@7708000: clock-names:3: 'mi2s-bit-clk2' was expected msm8916-asus-z00l.dtb: audio-controller@7708000: clock-names:4: 'mi2s-bit-clk3' was expected msm8916-asus-z00l.dtb: audio-controller@7708000: clock-names:5: 'pcnoc-mport-clk' was expected msm8916-asus-z00l.dtb: audio-controller@7708000: clock-names:6: 'pcnoc-sway-clk' was expected Signed-off-by:
-
Vijaya Krishna Nivarthi authored
As part of DMA mode support to qspi driver. Signed-off-by:
Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Vijaya Krishna Nivarthi authored
As part of DMA mode support to qspi driver. Signed-off-by:
-
Vijaya Krishna Nivarthi authored
As part of DMA mode support to qspi driver. Signed-off-by:
-
Krzysztof Kozlowski authored
The bus@0 node should have reg or ranges to fix dtbs W=1 warnings: Warning (unit_address_vs_reg): /soc@0/bus@0: node has a unit name, but no reg or ranges property Warning (simple_bus_reg): /soc@0/bus@0: missing or empty reg/ranges property Signed-off-by:
-
Krzysztof Kozlowski authored
SoC DTSI already comes with 85800000 reserved memory node, so assume the author wanted to update its length. This fixes dtbs W=1 warning: Warning (unique_unit_address_if_enabled): /reserved-memory/qhee-code@85800000: duplicate unit-address (also used in node /reserved-memory/reserved@85800000) Signed-off-by:
-
Krzysztof Kozlowski authored
Bindings expect ADC channel node names to follow specific pattern: sm6125-xiaomi-laurel-sprout.dtb: adc@3100: 'adc-chan@4d', 'adc-chan@4e', 'adc-chan@52', 'adc-chan@54' do not match any of the regexes: ... Signed-off-by:
-
Krzysztof Kozlowski authored
The SM8550 DTSI defines a fixed PCIE1 PHY AUX clock and expects boards to define frequency. Use the same as in MTP8550 to fix: sm8550-qrd.dtb: pcie-1-phy-aux-clk: 'clock-frequency' is a required property Signed-off-by:
-
Krzysztof Kozlowski authored
Since commit 6c84bbd1 ("dt-bindings: arm-smmu: Add generic qcom,smmu-500 bindings") the SMMU is supposed to use qcom,smmu-500 compatible fallback: ['qcom,sm8250-smmu-500', 'qcom,adreno-smmu', 'qcom,smmu-500', 'arm,mmu-500'] is too long 'qcom,sm8250-smmu-500' is not one of ['qcom,msm8996-smmu-v2', 'qcom,msm8998-smmu-v2', 'qcom,sdm630-smmu-v2'] 'qcom,sm8250-smmu-500' is not one of ['qcom,msm8996-smmu-v2', 'qcom,sc7180-smmu-v2', 'qcom,sdm630-smmu-v2', 'qcom,sdm845-smmu-v2' Signed-off-by:
-
Krzysztof Kozlowski authored
Since commit 6c84bbd1 ("dt-bindings: arm-smmu: Add generic qcom,smmu-500 bindings") the SMMU is supposed to use qcom,smmu-500 compatible fallback: ['qcom,qdu1000-smmu-500', 'arm,mmu-500'] is too short ['qcom,qdu1000-smmu-500', 'arm,mmu-500'] is too long Signed-off-by:
-
Krzysztof Kozlowski authored
The spi-max-frequency property belongs to SPI devices, not SPI controller: ipq8074-hk01.dtb: spi@78b5000: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected) Signed-off-by: -
Krzysztof Kozlowski authored
The spi-max-frequency property belongs to SPI devices, not SPI controller: ipq6018-cp01-c1.dtb: spi@78b5000: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected) Signed-off-by: -
Vignesh Viswanathan authored
In IPQ SoCs, bootloader will collect the system RAM contents upon crash for the post morterm analysis. If we don't reserve the memory region used by bootloader, obviously linux will consume it and upon next boot on crash, bootloader will be loaded in the same region, which will lead to loose some of the data, sometimes we may miss out critical information. So lets reserve the region used by the bootloader. Similarly SBL copies some data into the reserved region and it will be used in the crash scenario. So reserve 1MB for SBL as well. While at it, drop the size padding in the reserved memory region, wherever applicable. Signed-off-by:
Vignesh Viswanathan <quic_viswanat@quicinc.com> Signed-off-by:
-
Vignesh Viswanathan authored
Like any other Qualcomm SoCs, IPQ8074 and IPQ6018 also supports the download mode to collect the RAM dumps if system crashes, to perform the post mortem analysis. Add support for the same. Signed-off-by:
-
Neil Armstrong authored
Add crypto engine (CE) and CE BAM related nodes and definitions for the SM8450 SoC. Tested-by:
Anders Roxell <anders.roxell@linaro.org> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Signed-off-by:
Neil Armstrong <neil.armstrong@linaro.org> [Bhupesh: Corrected the compatible list] Signed-off-by:
-
Bhupesh Sharma authored
Add crypto engine (CE) and CE BAM related nodes and definitions to 'sm8350.dtsi'. Co-developed-by and Signed-off-by: Robert Foss <rfoss@kernel.org> [Bhupesh: Switch to '#interconnect-cells = <2>', available since commit 4f287e31] Tested-by:
-
Bhupesh Sharma authored
Add crypto engine (CE) and CE BAM related nodes and definitions to 'sm8250.dtsi'. Co-developed-by and Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Tested-by:
-
Bhupesh Sharma authored
Add crypto engine (CE) and CE BAM related nodes and definitions to 'sm8150.dtsi'. Tested-by:
-
Bhupesh Sharma authored
Add crypto engine (CE) and CE BAM related nodes and definitions to 'sm6115.dtsi'. Reviewed-by:
-
Bhupesh Sharma authored
As per documentation, Qualcomm SDM845 SoC supports SLIMBAM DMA engine v1.7.4, so use the correct compatible strings. Reviewed-by:
-
Bhupesh Sharma authored
As per documentation, Qualcomm SM8550 SoC supports BAM DMA engine v1.7.4, so use the correct compatible strings. Reviewed-by:
-
Kathiravan T authored
IPQ9574 has efuse region to determine the various HW quirks. Lets add the initial support and the individual fuses will be added as they are required. Reviewed-by:
-
Kathiravan T authored
IPQ6018 has efuse region to determine the various HW quirks. Lets add the initial support and the individual fuses will be added as they are required. Signed-off-by:
-
