- 04 Dec, 2009 23 commits
-
-
Robert Love authored
This argument isn't used, let's not pass it into the routine. Signed-off-by:
Robert Love <robert.w.love@intel.com> Signed-off-by:
James Bottomley <James.Bottomley@suse.de>
-
Robert Love authored
These are a few functions that were not used by other modules. They did not need to be exported so this patch removes the EXPORT_SYMBOLS call for each. Signed-off-by:
-
Yi Zou authored
Remove the redundant checking of netdev->netdev_ops as it will never be NULL. Signed-off-by:
Yi Zou <yi.zou@intel.com> Signed-off-by:
-
Yi Zou authored
xid 0 was used as an indication of invalid xid before but now xid 0 can be used as a valid exchange i. This patch fixes the ddp completion in fcp layer, i.e., in fc_fcp.c:fc_fcp_ddp_done() function, to make sure it does not use xid 0 for indication of an invalid xid, instead, it now uses use FC_XID_UNKNOWN for such indication. Signed-off-by:
-
Joe Eykholt authored
A received Fibre Channel ELS PRLI request contains a bit that indicates whether the remote port supports certain retry processing sequences. The test for this bit was somehow coded to use multiply instead of AND! This case would apply only for target mode operation, and it is unlikely to be noticed as an initiator. Signed-off-by:
Joe Eykholt <jeykholt@cisco.com> Signed-off-by:
-
Brian King authored
Bump driver version to 1.0.7. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
Brian King authored
Adds support for FC passthru via BSG. Signed-off-by:
-
Brian King authored
When issuing a Cancel to the virtual fibre channel adapter, the interface specifies a flags field for the client to indicate what kind of error recovery is being performed. Fix up these flags for terminate_rport_io to indicate an abort task set rather than a target reset. Signed-off-by:
-
Brian King authored
Remove a parameter to ibmvfc_init_host which is always set to zero by all callers. Signed-off-by:
-
Brian King authored
Need to grab the host lock around the call to ibmvfc_link_down. Signed-off-by:
-
Brian King authored
When processing the response to either a LUN reset, target reset, or an abort task set, the ibmvfc driver needs to treat as success receiving a response with a non-zero status in the response IU along with a general transport error with the FCP response code being zero. The VIOS currently guarantees this cannot happen, but a future version of VIOS may allow this to be returned, so ensure we handle this response combination correctly for TMFs, as we already do for SCSI commands. Signed-off-by:
-
Martin K. Petersen authored
This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
Martin K. Petersen authored
Add definitions for UNMAP, WRITE SAME{16,32} and GET LBA STATUS commands. Signed-off-by: -
Giridhar Malavali authored
Signed-off-by:
Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by:
-
Lalit Chandivade authored
Correct issues where the lower scsi-status would be improperly cleared, instead, allow the midlayer to process the status after the proper residual-count checks are performed. Finally, validate firmware status flags prior to assigning values from the FCP_RSP frame. Signed-off-by:
Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by:
Michael Hernandez <michael.hernandez@qlogic.com> Signed-off-by:
Ravi Anand <ravi.anand@qlogic.com> Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
-
Andrew Vasquez authored
Original code would not register FC4 nor FDMI information after a logical tear-down of an VFC link. Code now triggers registration date during processing of a 'Report ID Acquisition IOCB', which is submitted after a FLOGI or FDISC completes. Signed-off-by:
-
Andrew Vasquez authored
Original code discarded response-info field information and assumed the command completed successfully without verifying the target's status within the FCP_RSP packet. Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Giridhar Malavali authored
Signed-off-by:
-
Lalit Chandivade authored
In some case, the MPI and PHY versions when retrieved after the Execute-FW mailbox-command are incorrect (255.255.255.255). Instead, query the information after the check for firmware ready is done in the abort ISP path. Signed-off-by:
-
Andrew Vasquez authored
The mailbox register values may assist in debugging efforts. Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Jing Huang authored
This patch fixes checkpatch errors/warnings in bfad files. Signed-off-by:
Jing Huang <huangj@brocade.com> Signed-off-by:
-
- 29 Oct, 2009 17 commits
-
-
Michael Reed authored
I was doing some large lun count testing with 2.6.31 and hit a BUG_ON() in fc_timeout_deleted_rport(), and it seems like it should have been just a matter of time before someone did. It seems invalid to set port_state under lock, then expect it to remain set after releasing the lock. Another thread called fc_remote_port_add() when the lock was released, changing the port_state. This patch removes the BUG_ON and moves the test of the port_state to inside the host_lock. It's been running for several weeks now with no ill effect. Signed-off-by:
Michael Reed <mdr@sgi.com> Acked-by:
James Smart <james.smart@emulex.com> Signed-off-by:
-
Mike Christie authored
When the Integrity check is done in scsi_io_completion it will set error to -EILSEQ. However, at this point error is no longer used, and blk_end_request_err has -EIO hardcoded. It looks like there was just porting mistake with this patch http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=3e695f89c5debb735e4ff051e9e58d8fb4e95110 and we meant to send error upwards, so this patch changes the hard coded EIO to the error variable. I have only boot tested this patch. Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Acked-by:
-
Ed Lin authored
Update version to 4.6.0000.4. Signed-off-by:
Ed Lin <ed.lin@promise.com> Signed-off-by:
-
Ed Lin authored
Add support for reset request from firmware for controllers of st_shasta and st_yel type. Code adjustments necessary for this change are also included. Signed-off-by:
-
Ed Lin authored
The controllers of st_seq and st_vsc type can work if only small dma buffer is available, with a reduced firmware feature set. Add support for this case. Signed-off-by:
-
Kashyap, Desai authored
Bump version 3.04.13. Signed-off-by:
Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by:
-
Kashyap, Desai authored
Errata: Certain conditions on the scsi bus may casue the 53C1030 to incorrectly signal a SCSI_DATA_UNDERRUN to the host. Workaround 1: For an Errata on LSI53C1030 When the length of request data and transfer data are different with result of command (READ or VERIFY), DID_SOFT_ERROR is set. Workaround 2: For potential trouble on LSI53C1030. It is checked whether the length of request data is equal to the length of transfer and residual. MEDIUM_ERROR is set by incorrect data. Signed-off-by:
-
Kashyap, Desai authored
Signed-off-by:
-
Yang, Bo authored
Signed-off-by Bo Yang<bo.yang@lsi.com> Signed-off-by: -
Yang, Bo authored
use the constant MEGASAS_RESET_WAIT_TIME when waiting for firmware commands to complete (currently 3 minutes). Signed-off-by Bo Yang<bo.yang@lsi.com> Signed-off-by: -
Yang, Bo authored
The current sense pointer is cast to a u32 pointer, which can truncate on 64 bits. Fix by using unsigned long instead. Signed-off-by Bo Yang<bo.yang@lsi.com> Cc: stable@kernel.org Signed-off-by: -
Yang, Bo authored
Driver will update the OS devices after adding and deleting the device from FW. When driver receive add or delete AEN from FW, driver will send the DCMD cmd to get the System PD list from FW. Then driver will check if this device already in the OS: If add event and OS don't have the device (but it is in the list), driver add the device to OS, otherwise driver will not add. If remove event, driver will check the list, if is not in the list, but OS have the device, driver will remove the device. Signed-off-by Bo Yang<bo.yang@lsi.com> Signed-off-by: -
Yang, Bo authored
Add a lock to the skinny firmware initialisation sequence to prevent the two stage write being non atomic if multiple instances use it. Add a flag to the driver shutdown sequence to prevent aen ioctls being called after shutdown begins. Signed-off-by Bo Yang<bo.yang@lsi.com> Signed-off-by: -
Yang, Bo authored
To increase the performance, megaraid sas driver added the IEEE SGE support to support SAS2 controller. Signed-off-by Bo Yang<bo.yang@lsi.com> Signed-off-by: -
Yang, Bo authored
MegaRAID SAS2 controller ioctl can't use 32 cmd for applications. Driver need to divide different number of cmds to IO and application. Signed-off-by Bo Yang<bo.yang@lsi.com> Signed-off-by: -
Yang, Bo authored
When OS issue inquiry, it will check driver's internal pd_list. Signed-off-by Bo Yang<bo.yang@lsi.com> Signed-off-by: -
Yang, Bo authored
Add system PDs to OS. Driver implemented the get_pd_list function to get the system PD from FW. Signed-off-by Bo Yang<bo.yang@lsi.com> Signed-off-by:
-
