XG45 is not recognized/supported by the driver.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

XG_41 is not listed in xgifb_pci_table, so the code can be safely dropped.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Initialize ModeIdIndex according to the selected video mode. Currently
index 0 is always used and wrong clock data may be used.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Delete code that has been commented out.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Initialize ModeIdIndex according to the selected video mode. Currently
index 0 is always used and wrong video mode data may be used.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Delete code that has been commented out.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some platforms (e.g. ppc460ex) have 36-bit physical addressing, while
sizeof(unsigned long) == 4. Adapt xgifb driver to use phys_addr_t for
physical address variables instead of unsigned long.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

XGIfb driver transfers integer port number through several typecasts via
pjIOAddress field. Drop that field completely and use vga_base field of
xgifb_info directly.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The RelIO field is unused in the driver, drop it.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In function XGIfb_do_set_var() remove unused variable sr_data.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Christopher Harvey <charvey@matrox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This doesn't happen with the usbip virtual hci module, but another
module wanting to interface with this user space code could cause a
seg-fault by sending data without newlines.
Signed-off-by: Christopher Harvey <charvey@matrox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace kmalloc+memset pair by kzalloc() in 'wl_wds_device_alloc()'.
Add error handling to avoid null derefernce.
Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch changes the space of the indent to the tab that warning
found by the checkpatch.pl tool.

Signed-off-by: Hitoshi NAKAMORI<hitoshi.nakamori@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The below patch is a resend to fix some typos and comments that
I have found while reading.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Acked-by: David Daney <david.daney@cavium.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: wwang <wei_wang@realsil.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Minor error path clean-up.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch replaces existing event logging mechanism from ioctl to debugfs.
This patch replaces previous patch submitted by Chris Kelly. Previous patch can
be found at :-
http://article.gmane.org/gmane.linux.usb.general/60026/Signed-off-by: Rupesh Gujare <rgujare@ozmodevices.com>
Signed-off-by: Chris Kelly <ckelly@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1. use wd: prefix for all messages
2. fix strings
3. change from dev_dbg to dev_err where appropriate
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function has returned false in both error and success
cases.

1. change return value to int and return appropriate errno
2. use typical Linux kernel error handling.
3. normalize debug messages
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1. use only mei_driver_name and remove define MEI_DRIVER_NAME
2. drop MEI_DEV_NAME and assign device name directly
3. drop mei_driver_string, it is not used
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fix sparse warning:
'amt_wd_dev' was not declared. Should it be static
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

one instance of bare printk was forgotten in init.c file
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei_wd_set_start_timeout is only used from within wd.c
so remove its declaration from interface.h and mark
it static
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

define pr_fmt macro and remove mei: from the messages
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The below patch fixes a typo that I found while reading.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The below patch fixes a typo I found while reading.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Cc: Willy Tarreau <willy@meta-x.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The below patch fixes a typo I found while reading.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Cc: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The below patch fixes a typo that I found while reading.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Acked-by: Chris Kelly <ckelly@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The below patch fixes a typo I found while reading.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Cc: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stub_shutdown_connection() and vhci_shutdown_connection() use
task_is_dead() before kthread_stop(). This buys nothing and wrong.
kthread_stop() is fine even if this thread is dead. However, if it
is dead nothing protects this task_struct, we shouldn't touch this
memory.

Change the code to do the necessary get_task_struct/put_task_struct.

This patch assumes that

	- xxx_shutdown_connection() is always called, so we can't
	  leak the task_struct.

	- kthread_stop_put() can't be called twice on the same task.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Tobias Klauser <tklauser@distanz.ch>
Cc: Matt Mooney <mfm@muteddisk.com>,
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In drivers/staging/rtl8192e/rtl8192e/rtl_core.c the follwing printk-message can be found:

printk(KERN_ERR "rtl8193e: Unable to allocate space "

This is quite obviously just a typo, all other similar messages use
"rtl8192e" and the string "rtl8193e" does not occur anywhere else in the
source of the driver.
Signed-off-by: Axel Koellhofer <AxelKoellhofer@web.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reformated comment blocks to meet Coding Style
Signed-off-by: Andrew Miller <amiller@amilx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed some old comments and a few blank lines
Signed-off-by: Andrew Miller <amiller@amilx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix some more spacing issues I missed before
Signed-off-by: Andrew Miller <amiller@amilx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reformated the function declarations
Signed-off-by: Andrew Miller <amiller@amilx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed unnecessary tabs, spaces, and blank lines.
Signed-off-by: Andrew Miller <amiller@amilx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull two more small regmap fixes from Mark Brown:
 - Now we have users for it that aren't running Android it turns out
   that regcache_sync_region() is much more useful to drivers if it's
   exported for use by modules.  Who knew?
 - Make sure we don't divide by zero when doing debugfs dumps of
   rbtrees, not visible up until now because everything was providing at
   least some cache on startup.

* tag 'regmap-3.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: prevent division by zero in rbtree_show
  regmap: Export regcache_sync_region()