- 29 Mar, 2019 3 commits
-
-
Jakub Kicinski authored
NFP reprs are software device on top of the PF's vNIC. The comment above __dev_queue_xmit() sayeth: When calling this method, interrupts MUST be enabled. This is because the BH enable code must have IRQs enabled so that it will not deadlock. For netconsole we can't guarantee IRQ state, let's just disable netpoll on representors to be on the safe side. When the initial implementation of NFP reprs was added by the commit 5de73ee4 ("nfp: general representor implementation") .ndo_poll_controller was required for netpoll to be enabled. Fixes: ac3d9dd0 ("netpoll: make ndo_poll_controller() optional") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
dev_queue_xmit() may return error codes as well as netdev_tx_t, and it always consumes the skb. Make sure we always return a correct netdev_tx_t value. Fixes: eadfa4c3 ("nfp: add stats and xmit helpers for representors") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
net_hash_mix() currently uses kernel address of a struct net, and is used in many places that could be used to reveal this address to a patient attacker, thus defeating KASLR, for the typical case (initial net namespace, &init_net is not dynamically allocated) I believe the original implementation tried to avoid spending too many cycles in this function, but security comes first. Also provide entropy regardless of CONFIG_NET_NS. Fixes: 0b441916 ("netns: introduce the net_hash_mix "salt" for hashes") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Amit Klein <aksecurity@gmail.com> Reported-by: Benny Pinkas <benny@pinkas.net> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 28 Mar, 2019 14 commits
-
-
Bjørn Mork authored
This is a Qualcomm based device with a QMI function on interface 4. It is mode switched from 2020:2030 using a standard eject message. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2020 ProdID=2031 Rev= 2.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
-
xiaofeis authored
Add flow_dissect for qca tagged packet to get the right hash. Signed-off-by: Xiaofei Shen <xiaofeis@codeaurora.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Fixes 2019-03-26 This series contains updates to igb, ixgbe, i40e and fm10k. Jake fixes an issue with PTP in i40e where a previous commit resulted in a regression where the driver would interpret small negative adjustments as large positive additions, resulting in incorrect behavior. Arvind Sankar fixes an issue in igb where a previous commit would cause a warning in the PCI pm core and resulted in pci_pm_runtime_suspend would not call pci_save_state or pci_finish_runtime_suspend. Ivan Vecera fixes MDIO bus registration with ixgbe, where the driver was ignoring errors returned when registering and would leave the pointer in a NULL state which triggered a BUG when un-registering. Stefan Assmann fixes the check for Wake-On-LAN for i40e, which only supports magic packet. Yue Haibing fixes a potential NULL pointer de-reference in fm10k by adding a simple check if the value is NULL. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Simon Wunderlich says: ==================== Here are some batman-adv bugfixes: - Fix refcount underflows in bridge loop avoidance code, by Sven Eckelmann (3 patches) - Fix warning when CFG80211 isn't enabled, by Anders Roxell - Fix genl notification for throughput override, by Sven Eckelmann ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sabrina Dubroca authored
VRF devices don't work with upper devices. Currently, it's possible to add a VRF device to a bridge or team, and to create macvlan, macsec, or ipvlan devices on top of a VRF (bond and vlan are prevented respectively by the lack of an ndo_set_mac_address op and the NETIF_F_VLAN_CHALLENGED feature flag). Fix this by setting the IFF_NO_RX_HANDLER flag (introduced in commit f5426250 ("net: introduce IFF_NO_RX_HANDLER")). Cc: David Ahern <dsahern@gmail.com> Fixes: 193125db ("net: Introduce VRF device driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Dean Nelson says: ==================== thunderx: fix receive buffer page recycling In attempting to optimize receive buffer page recycling for XDP, commit 77322538 ("net: thunderx: Optimize page recycling for XDP") inadvertently introduced two problems for the non-XDP case, that will be addressed by this patch series. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dean Nelson authored
For the non-XDP case, commit 77322538 ("net: thunderx: Optimize page recycling for XDP") added code to nicvf_free_rbdr() that, when releasing the additional receive buffer page reference held for recycling, repeatedly calls put_page() until the page's _refcount goes to zero. Which results in the page being freed. This is not okay if the page's _refcount was greater than 1 (in the non-XDP case), because nicvf_free_rbdr() should not be subtracting more than what nicvf_alloc_page() had previously added to the page's _refcount, which was only 1 (in the non-XDP case). This can arise if a received packet is still being processed and the receive buffer (i.e., skb->head) has not yet been freed via skb_free_head() when nicvf_free_rbdr() is spinning through the aforementioned put_page() loop. If this should occur, when the received packet finishes processing and skb_free_head() is called, various problems can ensue. Exactly what, depends on whether the page has already been reallocated or not, anything from "BUG: Bad page state ... ", to "Unable to handle kernel NULL pointer dereference ..." or "Unable to handle kernel paging request...". So this patch changes nicvf_free_rbdr() to only call put_page() once for pages held for recycling (in the non-XDP case). Fixes: 77322538 ("net: thunderx: Optimize page recycling for XDP") Signed-off-by: Dean Nelson <dnelson@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dean Nelson authored
Commit 77322538 ("net: thunderx: Optimize page recycling for XDP") added code to nicvf_alloc_page() that inadvertently disables receive buffer page recycling for the non-XDP case by always NULL'ng the page pointer. This patch corrects two if-conditionals to allow for the recycling of non-XDP mode pages by only setting the page pointer to NULL when the page is not ready for recycling. Fixes: 77322538 ("net: thunderx: Optimize page recycling for XDP") Signed-off-by: Dean Nelson <dnelson@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Claudiu Manoil authored
With a recent link mode advertisement code update this helper providing local pause capability translation used for flow control link mode negotiation got broken. For eth drivers using this helper, the issue is apparent only if either PAUSE or ASYM_PAUSE is being advertised. Fixes: 3c1bcc86 ("net: ethernet: Convert phydev advertize and supported from u32 to link mode") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xi Wang authored
Currently, the rules for configuring search paths in Kbuild have changed, this will lead some erros when compiling hns3 with the following command: make O=DIR M=drivers/net/ethernet/hisilicon/hns3 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c:11:10: fatal error: hnae3.h: No such file or directory This patch fix it by adding $(srctree)/ prefix to the serach paths. Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
ila_xlat_nl_cmd_flush uses rhashtable walkers allocated from the stack but it never frees them. This corrupts the walker list of the hash table. This patch fixes it. Reported-by: syzbot+dae72a112334aa65a159@syzkaller.appspotmail.com Fixes: b6e71bde ("ila: Flush netlink command to clear xlat...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
MAINTAINERS still pointed to phy.txt after moving this file into the rst format, fix this. Reported-by: Joe Perches <joe@perches.com> Fixes: 25fe02d0 ("Documentation: net: phy: switch documentation to rst format") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
Christoph reported a stall while peeking datagram with an offset when busy polling is enabled. __skb_try_recv_datagram() uses as the loop termination condition 'queue empty'. When peeking, the socket queue can be not empty, even when no additional packets are received. Address the issue explicitly checking for receive queue changes, as currently done by __skb_wait_for_more_packets(). Fixes: 2b5cd0df ("net: Change return type of sk_busy_loop from bool to void") Reported-and-tested-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
This patches fixes few issues in mv88e6390x_port_set_cmode(). 1. When entering the function the old cmode may be 0, in this case mv88e6390x_serdes_get_lane() returns -ENODEV. As result we bail out and have no chance to set a new mode. Therefore deal properly with -ENODEV. 2. Once we have disabled power and irq, let's set the cached cmode to 0. This reflects the actual status and is cleaner if we bail out with an error in the following function calls. 3. The cached cmode is used by mv88e6390x_serdes_get_lane(), mv88e6390_serdes_power_lane() and mv88e6390_serdes_irq_enable(). Currently we set the cached mode to the new one at the very end of the function only, means until then we use the old one what may be wrong. 4. When calling mv88e6390_serdes_irq_enable() we use the lane value belonging to the old cmode. Get the lane belonging to the new cmode before calling this function. It's hard to provide a good "Fixes" tag because quite a few smaller changes have been done to the code in question recently. Fixes: d235c48b ("net: dsa: mv88e6xxx: power serdes on/off for 10G interfaces on 6390X") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 27 Mar, 2019 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Fixes here and there, a couple new device IDs, as usual: 1) Fix BQL race in dpaa2-eth driver, from Ioana Ciornei. 2) Fix 64-bit division in iwlwifi, from Arnd Bergmann. 3) Fix documentation for some eBPF helpers, from Quentin Monnet. 4) Some UAPI bpf header sync with tools, also from Quentin Monnet. 5) Set descriptor ownership bit at the right time for jumbo frames in stmmac driver, from Aaro Koskinen. 6) Set IFF_UP properly in tun driver, from Eric Dumazet. 7) Fix load/store doubleword instruction generation in powerpc eBPF JIT, from Naveen N. Rao. 8) nla_nest_start() return value checks all over, from Kangjie Lu. 9) Fix asoc_id handling in SCTP after the SCTP_*_ASSOC changes this merge window. From Marcelo Ricardo Leitner and Xin Long. 10) Fix memory corruption with large MTUs in stmmac, from Aaro Koskinen. 11) Do not use ipv4 header for ipv6 flows in TCP and DCCP, from Eric Dumazet. 12) Fix topology subscription cancellation in tipc, from Erik Hugne. 13) Memory leak in genetlink error path, from Yue Haibing. 14) Valid control actions properly in packet scheduler, from Davide Caratti. 15) Even if we get EEXIST, we still need to rehash if a shrink was delayed. From Herbert Xu. 16) Fix interrupt mask handling in interrupt handler of r8169, from Heiner Kallweit. 17) Fix leak in ehea driver, from Wen Yang" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (168 commits) dpaa2-eth: fix race condition with bql frame accounting chelsio: use BUG() instead of BUG_ON(1) net: devlink: skip info_get op call if it is not defined in dumpit net: phy: bcm54xx: Encode link speed and activity into LEDs tipc: change to check tipc_own_id to return in tipc_net_stop net: usb: aqc111: Extend HWID table by QNAP device net: sched: Kconfig: update reference link for PIE net: dsa: qca8k: extend slave-bus implementations net: dsa: qca8k: remove leftover phy accessors dt-bindings: net: dsa: qca8k: support internal mdio-bus dt-bindings: net: dsa: qca8k: fix example net: phy: don't clear BMCR in genphy_soft_reset bpf, libbpf: clarify bump in libbpf version info bpf, libbpf: fix version info and add it to shared object rxrpc: avoid clang -Wuninitialized warning tipc: tipc clang warning net: sched: fix cleanup NULL pointer exception in act_mirr r8169: fix cable re-plugging issue net: ethernet: ti: fix possible object reference leak net: ibm: fix possible object reference leak ...
-
- 26 Mar, 2019 22 commits
-
-
Yue Haibing authored
Syzkaller report this: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI CPU: 0 PID: 4378 Comm: syz-executor.0 Tainted: G C 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__lock_acquire+0x95b/0x3200 kernel/locking/lockdep.c:3573 Code: 00 0f 85 28 1e 00 00 48 81 c4 08 01 00 00 5b 5d 41 5c 41 5d 41 5e 41 5f c3 4c 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 cc 24 00 00 49 81 7d 00 e0 de 03 a6 41 bc 00 00 RSP: 0018:ffff8881e3c07a40 EFLAGS: 00010002 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000010 RSI: 0000000000000000 RDI: 0000000000000080 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8881e3c07d98 R11: ffff8881c7f21f80 R12: 0000000000000001 R13: 0000000000000080 R14: 0000000000000000 R15: 0000000000000001 FS: 00007fce2252e700(0000) GS:ffff8881f2400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fffc7eb0228 CR3: 00000001e5bea002 CR4: 00000000007606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: lock_acquire+0xff/0x2c0 kernel/locking/lockdep.c:4211 __mutex_lock_common kernel/locking/mutex.c:925 [inline] __mutex_lock+0xdf/0x1050 kernel/locking/mutex.c:1072 drain_workqueue+0x24/0x3f0 kernel/workqueue.c:2934 destroy_workqueue+0x23/0x630 kernel/workqueue.c:4319 __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x30c/0x480 kernel/module.c:961 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fce2252dc58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000140 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fce2252e6bc R13: 00000000004bcca9 R14: 00000000006f6b48 R15: 00000000ffffffff If alloc_workqueue fails, it should return -ENOMEM, otherwise may trigger this NULL pointer dereference while unloading drivers. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 0a38c17a ("fm10k: Remove create_workqueue") Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Stefan Assmann authored
The current check for WoL on i40e is broken. Code comment says only magic packet is supported, so only check for that. Fixes: 540a152d (i40e/ixgbe/igb: fail on new WoL flag setting WAKE_MAGICSECURE) Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Ivan Vecera authored
The ixgbe ignores errors returned from mdiobus_register() and leaves adapter->mii_bus non-NULL and MDIO bus state as MDIOBUS_ALLOCATED. This triggers a BUG from mdiobus_unregister() during ixgbe_remove() call. Fixes: 8fa10ef0 ("ixgbe: register a mdiobus") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Arvind Sankar authored
The runtime_suspend device callbacks are not supposed to save configuration state or change the power state. Commit fb29f76cc566 ("igb: Fix an issue that PME is not enabled during runtime suspend") changed the driver to not save configuration state during runtime suspend, however the driver callback still put the device into a low-power state. This causes a warning in the pci pm core and results in pci_pm_runtime_suspend not calling pci_save_state or pci_finish_runtime_suspend. Fix this by not changing the power state either, leaving that to pci pm core, and make the same change for suspend callback as well. Also move a couple of defines into the appropriate header file instead of inline in the .c file. Fixes: fb29f76cc566 ("igb: Fix an issue that PME is not enabled during runtime suspend") Signed-off-by: Arvind Sankar <niveditas98@gmail.com> Reviewed-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
Commit 0ac30ce4 ("i40e: fix up 32 bit timespec references", 2017-07-26) claims to be cleaning up references to 32-bit timespecs. The actual contents of the commit make no sense, as it converts a call to timespec64_add into timespec64_add_ns. This would seem ok, if (a) the change was documented in the commit message, and (b) timespec64_add_ns supported negative numbers. timespec64_add_ns doesn't work with signed deltas, because the implementation is based around iter_div_u64_rem. This change resulted in a regression where i40e_ptp_adjtime would interpret small negative adjustments as large positive additions, resulting in incorrect behavior. This commit doesn't appear to fix anything, is not well explained, and introduces a bug, so lets just revert it. Reverts: 0ac30ce4 ("i40e: fix up 32 bit timespec references", 2017-07-26) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Stable fixes: - Fix nfs4_lock_state refcounting in nfs4_alloc_{lock,unlock}data() - fix mount/umount race in nlmclnt. - NFSv4.1 don't free interrupted slot on open Bugfixes: - Don't let RPC_SOFTCONN tasks time out if the transport is connected - Fix a typo in nfs_init_timeout_values() - Fix layoutstats handling during read failovers - fix uninitialized variable warning" * tag 'nfs-for-5.1-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: fix uninitialized variable warning pNFS/flexfiles: Fix layoutstats handling during read failovers NFS: Fix a typo in nfs_init_timeout_values() SUNRPC: Don't let RPC_SOFTCONN tasks time out if the transport is connected NFSv4.1 don't free interrupted slot on open NFS: fix mount/umount race in nlmclnt. NFS: Fix nfs4_lock_state refcounting in nfs4_alloc_{lock,unlock}data()
-
Alakesh Haloi authored
Avoid following compiler warning on uninitialized variable net/sunrpc/xprtsock.c: In function ‘xs_read_stream_request.constprop’: net/sunrpc/xprtsock.c:525:10: warning: ‘read’ may be used uninitialized in this function [-Wmaybe-uninitialized] return read; ^~~~ net/sunrpc/xprtsock.c:529:23: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized] return ret < 0 ? ret : read; ~~~~~~~~~~~~~~^~~~~~ Signed-off-by: Alakesh Haloi <alakesh.haloi@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
-
Ioana Ciornei authored
It might happen that Tx conf acknowledges a frame before it was subscribed in bql, as subscribing was previously done after the enqueue operation. This patch moves the netdev_tx_sent_queue call before the actual frame enqueue, so that this can never happen. Fixes: 569dac6a ("dpaa2-eth: bql support") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
clang warns about possible bugs in a dead code branch after BUG_ON(1) when CONFIG_PROFILE_ALL_BRANCHES is enabled: drivers/net/ethernet/chelsio/cxgb4/sge.c:479:3: error: variable 'buf_size' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] BUG_ON(1); ^~~~~~~~~ include/asm-generic/bug.h:61:36: note: expanded from macro 'BUG_ON' #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0) ^~~~~~~~~~~~~~~~~~~ include/linux/compiler.h:48:23: note: expanded from macro 'unlikely' # define unlikely(x) (__branch_check__(x, 0, __builtin_constant_p(x))) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/chelsio/cxgb4/sge.c:482:9: note: uninitialized use occurs here return buf_size; ^~~~~~~~ drivers/net/ethernet/chelsio/cxgb4/sge.c:479:3: note: remove the 'if' if its condition is always true BUG_ON(1); ^ include/asm-generic/bug.h:61:32: note: expanded from macro 'BUG_ON' #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0) ^ drivers/net/ethernet/chelsio/cxgb4/sge.c:459:14: note: initialize the variable 'buf_size' to silence this warning int buf_size; ^ = 0 Use BUG() here to create simpler code that clang understands correctly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
In dumpit, unlike doit, the check for info_get op being defined is missing. Add it and avoid null pointer dereference in case driver does not define this op. Fixes: f9cf2288 ("devlink: add device information API") Reported-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
Previously the green and amber LEDs on this quad PHY were solid, to indicate an encoding of the link speed (10/100/1000). This keeps the LEDs always on just as before, but now they flash on Rx/Tx activity. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
When running a syz script, a panic occurred: [ 156.088228] BUG: KASAN: use-after-free in tipc_disc_timeout+0x9c9/0xb20 [tipc] [ 156.094315] Call Trace: [ 156.094844] <IRQ> [ 156.095306] dump_stack+0x7c/0xc0 [ 156.097346] print_address_description+0x65/0x22e [ 156.100445] kasan_report.cold.3+0x37/0x7a [ 156.102402] tipc_disc_timeout+0x9c9/0xb20 [tipc] [ 156.106517] call_timer_fn+0x19a/0x610 [ 156.112749] run_timer_softirq+0xb51/0x1090 It was caused by the netns freed without deleting the discoverer timer, while later on the netns would be accessed in the timer handler. The timer should have been deleted by tipc_net_stop() when cleaning up a netns. However, tipc has been able to enable a bearer and start d->timer without the local node_addr set since Commit 52dfae5c ("tipc: obtain node identity from interface by default"), which caused the timer not to be deleted in tipc_net_stop() then. So fix it in tipc_net_stop() by changing to check local node_id instead of local node_addr, as Jon suggested. While at it, remove the calling of tipc_nametbl_withdraw() there, since tipc_nametbl_stop() will take of the nametbl's freeing after. Fixes: 52dfae5c ("tipc: obtain node identity from interface by default") Reported-by: syzbot+a25307ad099309f1c2b9@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dmitry Bezrukov authored
New device of QNAP based on aqc111u Add this ID to blacklist of cdc_ether driver as well Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Leslie Monis authored
RFC 8033 replaces the IETF draft for PIE Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christian Lamparter authored
This patch implements accessors for the QCA8337 MDIO access through the MDIO_MASTER register, which makes it possible to access the PHYs on slave-bus through the switch. In cases where the switch ports are already mapped via external "phy-phandles", the internal mdio-bus is disabled in order to prevent a duplicated discovery and enumeration of the same PHYs. Don't use mixed external and internal mdio-bus configurations, as this is not supported by the hardware. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christian Lamparter authored
This belated patch implements Andrew Lunn's request of "remove the phy_read() and phy_write() functions." <https://lore.kernel.org/patchwork/comment/902734/> While seemingly harmless, this causes the switch's user port PHYs to get registered twice. This is because the DSA subsystem will create a slave mdio-bus not knowing that the qca8k_phy_(read|write) accessors operate on the external mdio-bus. So the same "bus" gets effectively duplicated. Cc: stable@vger.kernel.org Fixes: 6b93fb46 ("net-next: dsa: add new driver for qca8xxx family") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christian Lamparter authored
This patch updates the qca8k's binding to document to the approach for using the internal mdio-bus of the supported qca8k switches. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christian Lamparter authored
In the example, the phy at phy@0 is clashing with the switch0@0 at the same address. Usually, the switches are accessible through pseudo PHYs which in case of the qca8k are located at 0x10 - 0x18. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: - fsync fixes: i_size for truncate vs fsync, dio vs buffered during snapshotting, remove complicated but incomplete assertion - removed excessive warnigs, misreported device stats updates - fix raid56 page mapping for 32bit arch - fixes reported by static analyzer * tag 'for-5.1-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: fix assertion failure on fsync with NO_HOLES enabled btrfs: Avoid possible qgroup_rsv_size overflow in btrfs_calculate_inode_block_rsv_size btrfs: Fix bound checking in qgroup_trace_new_subtree_blocks btrfs: raid56: properly unmap parity page in finish_parity_scrub() btrfs: don't report readahead errors and don't update statistics Btrfs: fix file corruption after snapshotting due to mix of buffered/DIO writes btrfs: remove WARN_ON in log_dir_items Btrfs: fix incorrect file size after shrinking truncate and fsync
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: "Three small fixes: - A fix to a double free in the histogram code - Uninitialized variable fix - Use NULL instead of zero fix and spelling fixes" * tag 'trace-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix warning using plain integer as NULL & spelling corrections tracing: initialize variable in create_dyn_event() tracing: Remove unnecessary var_ref destroy in track_data_destroy()
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linuxLinus Torvalds authored
Pull file locking bugfix from Jeff Layton: "Just a single fix for a bug that crept into POSIX lock deadlock detection in v5.0" * tag 'locks-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux: locks: wake any locks blocked on request before deadlock check
-
Hariprasad Kelam authored
Changed 0 --> NULL to avoid sparse warning Corrected spelling mistakes reported by checkpatch.pl Sparse warning below: sudo make C=2 CF=-D__CHECK_ENDIAN__ M=kernel/trace CHECK kernel/trace/ftrace.c kernel/trace/ftrace.c:3007:24: warning: Using plain integer as NULL pointer kernel/trace/ftrace.c:4758:37: warning: Using plain integer as NULL pointer Link: http://lkml.kernel.org/r/20190323183523.GA2244@hari-Inspiron-1545Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-