- 27 Jul, 2024 34 commits
-
-
Cruise authored
The DP tunnel AUX reply is received through Outbox1. Print the Outbox1 status if an issue occurs. Signed-off-by:
Cruise <Cruise.Hung@amd.com> Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by:
Wayne Lin <wayne.lin@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Hansen Dsouza authored
Add new enable and disable functions based on DCCG spec. Signed-off-by:
Hansen Dsouza <Hansen.Dsouza@amd.com> Reviewed-by:
Muhammad Ahmed <ahmed.ahmed@amd.com> Tested-by:
-
Thomas Weißschuh authored
Instead of manually passing around 'struct edid *' and its size, use 'struct drm_edid', which encapsulates a validated combination of both. As the drm_edid_ can handle NULL gracefully, the explicit checks can be dropped. Also save a few characters by transforming '&array[0]' to the equivalent 'array' and using 'max_t(int, ...)' instead of manual casts. Signed-off-by:
Thomas Weißschuh <linux@weissschuh.net> Signed-off-by:
-
Thomas Weißschuh authored
Instead of manually passing around 'struct edid *' and its size, use 'struct drm_edid', which encapsulates a validated combination of both. As the drm_edid_ can handle NULL gracefully, the explicit checks can be dropped. Also save a few characters by transforming '&array[0]' to the equivalent 'array' and using 'max_t(int, ...)' instead of manual casts. Signed-off-by:
-
Alex Deucher authored
We only need to skip this on modern APUs. It's required on older APUs as it's where start_smu gets called from. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3502 Fixes: 064d9243 ("drm/amd/pm: avoid to load smu firmware for APUs") Reviewed-by:
Tim Huang <tim.huang@amd.com> Signed-off-by:
-
Sunil Khatri authored
Problem: IP dump right now is done post suspend of all IP's which for some IP's could change power state and software state too which we do not want to reflect in the dump as it might not be same at the time of hang. Solution: IP should be dumped as close to the HW state when the GPU was in hung state without trying to reinitialize any resource. Acked-by:
Sunil Khatri <sunil.khatri@amd.com> Signed-off-by:
-
Alex Hung authored
sampling_rate is an uint8_t but is assigned an unsigned int, and thus it can overflow. As a result, sampling_rate is changed to uint32_t. Similarly, LINK_QUAL_PATTERN_SET has a size of 2 bits, and it should only be assigned to a value less or equal than 4. This fixes 2 INTEGER_OVERFLOW issues reported by Coverity. Signed-off-by:
Alex Hung <alex.hung@amd.com> Reviewed-by:
Wenjing Liu <wenjing.liu@amd.com> Tested-by:
-
Ilya Bakoulin authored
Need to use cm3_helper function with DCN401 to avoid cases where high RGB component values can get set to zero if using the TF curve generated by cm_helper. Signed-off-by:
Ilya Bakoulin <Ilya.Bakoulin@amd.com> Reviewed-by:
Alvin Lee <alvin.lee2@amd.com> Tested-by:
-
Nicholas Kazlauskas authored
[Why] When pre-OS firmware enables display support for displays that operate the DIG in 2 pixels per cycle processing modes the inferred pixel rate from get_pixel_clk_frequency_100hz does not account for the true pixel rate since we're outputting 2 per cycle past the stream encoder. This causes seamless boot validation to abort early. [How] Add a new stream encoder function for getting pixels per cycle from the stream encoder. If the pixels per cycle is greater than 1 and the driver policy is to enable 2 pixels per cycle for post-OS then allow seamless boot to continue. Signed-off-by:
Duncan Ma <duncan.ma@amd.com> Tested-by:
-
Tom Chung authored
[Why] After resume the system, the new_crtc_state->vrr_infopacket does not synchronize with the current state. It will affect the update_freesync_state_on_stream() does not update the state correctly. The previous patch causes a PSR SU regression that cannot let panel go into self-refresh mode. [How] Reset the VRR config during resume to force update the VRR config later. Fixes: eb6dfbb7 ("drm/amd/display: Reset freesync config before update new state") Signed-off-by:
Tom Chung <chiahsuan.chung@amd.com> Reviewed-by:
Sun peng Li <sunpeng.li@amd.com> Tested-by:
-
Tom Chung authored
[Why & How] Add a missing PSR state to make the dmub_psr_get_state() return a correct PSR state. Signed-off-by:
-
Charlene Liu authored
[why] dmubfw added a new event type, update amdgpu to avoid "notify type 6 invalid" Signed-off-by:
Charlene Liu <Charlene.Liu@amd.com> Reviewed-by:
Chris Park <chris.park@amd.com> Tested-by:
-
Charlene Liu authored
[why] immediate_disable_crtc does not reset ODM. if switching to disable_crtc which will disable ODM as well. i.e. need to restore ODM mem cfg at reenable it at end of w/a. Signed-off-by:
Xi (Alex) Liu <xi.liu@amd.com> Tested-by:
-
Michael Chen authored
MES firmware requires larger log buffer for gfx12. Allocate proper buffer respectively for gfx11 and gfx12. Signed-off-by:
Michael Chen <michael.chen@amd.com> Acked-by:
-
Alex Hung authored
[WHAT & HOW] dc_state_get_stream_status can return null, and therefore null must be checked before stream_status is used. This fixes 1 NULL_RETURNS issue reported by Coverity. Signed-off-by:
-
Alex Hung authored
[WHAT & HOW] dc_link is null checked previously in the same function, indicating it might be null as reported by Coverity. This fixes 1 FORWARD_NULL issue reported by Coverity. Signed-off-by:
-
Alex Hung authored
[WHAT & HOW] Integer multiplies integer may overflow in context that expects an expression of unsigned long long (64 bits). This can be fixed by casting integer to unsigned long long to force 64 bits results. This fixes 2 OVERFLOW_BEFORE_WIDEN issues reported by Coverity. Signed-off-by:
-
Alvin Lee authored
Use debug option for disabling unbounded req in DML21 Signed-off-by:
Austin Zheng <Austin.Zheng@amd.com> Tested-by:
-
Bhuvanachandra Pinninti authored
Moved files to respective folders to improve DIO code. Signed-off-by:
Bhuvanachandra Pinninti <bpinnint@amd.com> Reviewed-by:
Martin Leung <martin.leung@amd.com> Tested-by:
-
Nicholas Kazlauskas authored
[Why] If we aren't entering RCG/IPS2 or CLKSTOP is not supported by PMFW then we should be requesting a dispclk value of 0MHz to PMFW. Currenly we run at max clock since there's an assumption in APU clock table formulation where we can run at any DISPCLK at any state so the real clock value ends up as 1200Mhz - the maximum. [How] Set to 0 instead of the minimum value in the state array. Signed-off-by:
-
Sunil Khatri authored
VCN dump is dependent on power state of the ip. Dump is valid if VCN was powered up at the time of ip dump. Signed-off-by:
-
Chris Park authored
[Why] When only 4 I2C is declared, two dummies are required to correctly map GPIO port. [How] Add one more I2C dummy entry to match GPIO port. Signed-off-by:
-
Leo Li authored
[Why & How] 1. After allowing idle optimizations, hw programming is disallowed. 2. Before hw programming, we need to disallow idle optimizations. Otherwise, in scenario 1, we will immediately kick hw out of idle optimizations with register access. Scenario 2 is less of a concern, since any register access will kick hw out of idle optimizations. But we'll do it early for correctness. Signed-off-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by:
-
Leo Li authored
[Why] We manage interrupts for CRTCs in two places: 1. In manage_dm_interrupts(), when CRTC get enabled or disabled 2. When drm_vblank_get/put() starts or kills the vblank counter, calling into amdgpu_dm_crtc_set_vblank() The interrupts managed by these twp places should be identical. [How] Since manage_dm_interrupts() already use drm_crtc_vblank_on/off(), just move all CRTC interrupt management into amdgpu_dm_crtc_set_vblank(). This has the added benefit of disabling all CRTC and HUBP interrupts when there are no vblank requestors. Note that there is a TODO item - unchanged from when it was first introduced - to properly identify the HUBP instance from the OTG instance, rather than just assume direct mapping. Signed-off-by:
-
Samson Tam authored
[Why] Seeing several regressions related to quality EASF and ISHARP changes and removing dc dependency changes. [How] Roll back SPL changes Signed-off-by:
Samson Tam <Samson.Tam@amd.com> Reviewed-by:
-
Srinivasan Shanmugam authored
The fix involves setting 'err' to '-EINVAL' before each 'goto out_err_unreserve'. Fixes the below: drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_queue.c:265 kfd_queue_acquire_buffers() warn: missing error code 'err' drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_queue.c 226 int kfd_queue_acquire_buffers(struct kfd_process_device *pdd, struct queue_properties *properties) 227 { 228 struct kfd_topology_device *topo_dev; 229 struct amdgpu_vm *vm; 230 u32 total_cwsr_size; 231 int err; 232 233 topo_dev = kfd_topology_device_by_id(pdd->dev->id); 234 if (!topo_dev) 235 return -EINVAL; 236 237 vm = drm_priv_to_vm(pdd->drm_priv); 238 err = amdgpu_bo_reserve(vm->root.bo, false); 239 if (err) 240 return err; 241 242 err = kfd_queue_buffer_get(vm, properties->write_ptr, &properties->wptr_bo, PAGE_SIZE); 243 if (err) 244 goto out_err_unreserve; 245 246 err = kfd_queue_buffer_get(vm, properties->read_ptr, &properties->rptr_bo, PAGE_SIZE); 247 if (err) 248 goto out_err_unreserve; 249 250 err = kfd_queue_buffer_get(vm, (void *)properties->queue_address, 251 &properties->ring_bo, properties->queue_size); 252 if (err) 253 goto out_err_unreserve; 254 255 /* only compute queue requires EOP buffer and CWSR area */ 256 if (properties->type != KFD_QUEUE_TYPE_COMPUTE) 257 goto out_unreserve; This is clearly a success path. 258 259 /* EOP buffer is not required for all ASICs */ 260 if (properties->eop_ring_buffer_address) { 261 if (properties->eop_ring_buffer_size != topo_dev->node_props.eop_buffer_size) { 262 pr_debug("queue eop bo size 0x%lx not equal to node eop buf size 0x%x\n", 263 properties->eop_buf_bo->tbo.base.size, 264 topo_dev->node_props.eop_buffer_size); --> 265 goto out_err_unreserve; This has err in the label name. err = -EINVAL? 266 } 267 err = kfd_queue_buffer_get(vm, (void *)properties->eop_ring_buffer_address, 268 &properties->eop_buf_bo, 269 properties->eop_ring_buffer_size); 270 if (err) 271 goto out_err_unreserve; 272 } 273 274 if (properties->ctl_stack_size != topo_dev->node_props.ctl_stack_size) { 275 pr_debug("queue ctl stack size 0x%x not equal to node ctl stack size 0x%x\n", 276 properties->ctl_stack_size, 277 topo_dev->node_props.ctl_stack_size); 278 goto out_err_unreserve; err? 279 } 280 281 if (properties->ctx_save_restore_area_size != topo_dev->node_props.cwsr_size) { 282 pr_debug("queue cwsr size 0x%x not equal to node cwsr size 0x%x\n", 283 properties->ctx_save_restore_area_size, 284 topo_dev->node_props.cwsr_size); 285 goto out_err_unreserve; err? Not sure. 286 } 287 288 total_cwsr_size = (topo_dev->node_props.cwsr_size + topo_dev->node_props.debug_memory_size) 289 * NUM_XCC(pdd->dev->xcc_mask); 290 total_cwsr_size = ALIGN(total_cwsr_size, PAGE_SIZE); 291 292 err = kfd_queue_buffer_get(vm, (void *)properties->ctx_save_restore_area_address, 293 &properties->cwsr_bo, total_cwsr_size); 294 if (!err) 295 goto out_unreserve; 296 297 amdgpu_bo_unreserve(vm->root.bo); 298 299 err = kfd_queue_buffer_svm_get(pdd, properties->ctx_save_restore_area_address, 300 total_cwsr_size); 301 if (err) 302 goto out_err_release; 303 304 return 0; 305 306 out_unreserve: 307 amdgpu_bo_unreserve(vm->root.bo); 308 return 0; 309 310 out_err_unreserve: 311 amdgpu_bo_unreserve(vm->root.bo); 312 out_err_release: 313 kfd_queue_release_buffers(pdd, properties); 314 return err; 315 } Fixes: 629568d2 ("drm/amdkfd: Validate queue cwsr area and eop buffer size") Reported-by:Dan Carpenter <dan.carpenter@linaro.org> Cc: Philip Yang <Philip.Yang@amd.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by:
Philip Yang <Philip.Yang@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
This commit addresses a null pointer dereference issue in the `commit_planes_for_stream` function at line 4140. The issue could occur when `top_pipe_to_program` is null. The fix adds a check to ensure `top_pipe_to_program` is not null before accessing its stream_res. This prevents a null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4140 commit_planes_for_stream() error: we previously assumed 'top_pipe_to_program' could be null (see line 3906) Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
This commit addresses a null pointer dereference issue in the `dcn20_program_pipe` function. The issue could occur when `pipe_ctx->plane_state` is null. The fix adds a check to ensure `pipe_ctx->plane_state` is not null before accessing. This prevents a null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn20/dcn20_hwseq.c:1925 dcn20_program_pipe() error: we previously assumed 'pipe_ctx->plane_state' could be null (see line 1877) Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Venkata Narendra Kumar Gutta authored
ISP I2C bus device can't be enumerated via ACPI mechanism since it shares the memory map with the AMDGPU. So use the MFD mechanism for registering the ISP I2C device and add the required resources. Signed-off-by:
Venkata Narendra Kumar Gutta <vengutta@amd.com> Acked-by:
-
Christian König authored
Otherwise we won't get correct access to the IB. v2: keep setting AMDGPU_GEM_CREATE_VRAM_CONTIGUOUS to avoid problems in the VRAM backend. Signed-off-by:Christian König <christian.koenig@amd.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3501 Fixes: e362b7c8 ("drm/amdgpu: Modify the contiguous flags behaviour") Reviewed-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Sunil Khatri authored
Add support for logging the registers in devcoredump buffer for vcn_v3_0. Signed-off-by:
-
Sunil Khatri authored
Add support of vcn ip dump in the devcoredump for vcn_v3_0. Signed-off-by:
-
Sunil Khatri authored
Add macro definition which calculate offset of the register with index override. This is useful in case when there is an array of registers which is common for all instances. To read registers in that case it is easy to define registers once and the index value is manually passed to calculate proper offset of register for each instance. Signed-off-by:
-
Sunil Khatri authored
Add pointer to the vcn ip dump in the vcn global structure to be accessible for all vcn version via global adev. Reviewed-by:
-
- 25 Jul, 2024 6 commits
-
-
Jiapeng Chong authored
No functional modification involved. ./drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:481:2-3: Unneeded semicolon. ./drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:3783:168-169: Unneeded semicolon. ./drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:3782:166-167: Unneeded semicolon. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9575Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Jonathan Kim authored
Certain GPUs have better copy performance over xGMI on specific SDMA engines depending on the source and destination GPU. Allow users to create SDMA queues on these recommended engines. Close to 2x overall performance has been observed with this optimization. Signed-off-by:
Jonathan Kim <jonathan.kim@amd.com> Reviewed-by:
Felix Kuehling <felix.kuehling@amd.com> Signed-off-by:
-
Kenneth Feng authored
support gpu_metrics sysfs interface for smu v14.0.2/3 Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Reviewed-by:
Yang Wang <kevinyang.wang@amd.com> Signed-off-by:
-
Jiapeng Chong authored
Use existing swap() function rather than duplicating its implementation. ./drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_pmo/dml2_pmo_dcn3.c:17:29-30: WARNING opportunity for swap(). Reported-by:
-
Nathan Chancellor authored
Commit 2563391e ("drm/amd/display: DML2.1 resynchronization") blew away the compiler warning fix from commit 2fde4fdd ("drm/amd/display: Avoid -Wenum-float-conversion in add_margin_and_round_to_dfs_grainularity()"), causing the warning to reappear. drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_dpmm/dml2_dpmm_dcn4.c:183:58: error: arithmetic between enumeration type 'enum dentist_divider_range' and floating-point type 'double' [-Werror,-Wenum-float-conversion] 183 | divider = (unsigned int)(DFS_DIVIDER_RANGE_SCALE_FACTOR * (vco_freq_khz / clock_khz)); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 error generated. Apply the fix again to resolve the warning. Fixes: 2563391e ("drm/amd/display: DML2.1 resynchronization") Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a dml2_printf message. Fix it. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
-
