- 18 Sep, 2023 7 commits
-
-
Benjamin Gray authored
Syzkaller reported a sleep in atomic context bug relating to the HASHCHK handler logic: BUG: sleeping function called from invalid context at arch/powerpc/kernel/traps.c:1518 in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 25040, name: syz-executor preempt_count: 0, expected: 0 RCU nest depth: 0, expected: 0 no locks held by syz-executor/25040. irq event stamp: 34 hardirqs last enabled at (33): [<c000000000048b38>] prep_irq_for_enabled_exit arch/powerpc/kernel/interrupt.c:56 [inline] hardirqs last enabled at (33): [<c000000000048b38>] interrupt_exit_user_prepare_main+0x148/0x600 arch/powerpc/kernel/interrupt.c:230 hardirqs last disabled at (34): [<c00000000003e6a4>] interrupt_enter_prepare+0x144/0x4f0 arch/powerpc/include/asm/interrupt.h:176 softirqs last enabled at (0): [<c000000000281954>] copy_process+0x16e4/0x4750 kernel/fork.c:2436 softirqs last disabled at (0): [<0000000000000000>] 0x0 CPU: 15 PID: 25040 Comm: syz-executor Not tainted 6.5.0-rc5-00001-g3ccdff6bb06d #3 Hardware name: IBM,9105-22A POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1040.00 (NL1040_021) hv:phyp pSeries Call Trace: [c0000000a8247ce0] [c00000000032b0e4] __might_resched+0x3b4/0x400 kernel/sched/core.c:10189 [c0000000a8247d80] [c0000000008c7dc8] __might_fault+0xa8/0x170 mm/memory.c:5853 [c0000000a8247dc0] [c00000000004160c] do_program_check+0x32c/0xb20 arch/powerpc/kernel/traps.c:1518 [c0000000a8247e50] [c000000000009b2c] program_check_common_virt+0x3bc/0x3c0 To determine if a trap was caused by a HASHCHK instruction, we inspect the user instruction that triggered the trap. However this may sleep if the page needs to be faulted in (get_user_instr() reaches __get_user(), which calls might_fault() and triggers the bug message). Move the HASHCHK handler logic to after we allow IRQs, which is fine because we are only interested in HASHCHK if it's a user space trap. Fixes: 5bcba4e6 ("powerpc/dexcr: Handle hashchk exception") Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230915034604.45393-1-bgray@linux.ibm.com
-
Christophe Leroy authored
It used to be impossible to select CONFIG_CPM2 without selecting CONFIG_FSL_SOC at the same time because CONFIG_CPM2 was dependent on CONFIG_8260 and CONFIG_8260 was selecting CONFIG_FSL_SOC. But after commit eb5aa213 ("powerpc/82xx: Remove CONFIG_8260 and CONFIG_8272") CONFIG_CPM2 depends on CONFIG_PPC_82xx instead but CONFIG_PPC_82xx doesn't directly selects CONFIG_FSL_SOC. Fix it by forcing CONFIG_PPC_82xx to select CONFIG_FSL_SOC just like already done by PPC_8xx, PPC_MPC512x, PPC_83xx, PPC_86xx. Reported-by: Randy Dunlap <rdunlap@infradead.org> Fixes: eb5aa213 ("powerpc/82xx: Remove CONFIG_8260 and CONFIG_8272") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/7ab513546148ebe33ddd4b0ea92c7bfd3cce3ad7.1694705016.git.christophe.leroy@csgroup.eu
-
Naveen N Rao authored
powerpc: Fix build issue with LD_DEAD_CODE_DATA_ELIMINATION and FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY We recently added support for -fpatchable-function-entry and it is enabled by default on ppc32 (ppc64 needs gcc v13.1.0). When building the kernel for ppc32 and also enabling CONFIG_LD_DEAD_CODE_DATA_ELIMINATION, we see the below build error with older gcc versions: powerpc-linux-gnu-ld: init/main.o(__patchable_function_entries): error: need linked-to section for --gc-sections This error is thrown since __patchable_function_entries section would be garbage collected with --gc-sections since it does not reference any other kept sections. This has subsequently been fixed with: https://sourceware.org/git/?p=binutils-gdb.git;a=commitdiff;h=b7d072167715829eed0622616f6ae0182900de3e Disable LD_DEAD_CODE_DATA_ELIMINATION for gcc versions before v11.1.0 if using -fpatchable-function-entry to avoid this bug. Fixes: 0f71dcfb ("powerpc/ftrace: Add support for -fpatchable-function-entry") Reported-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Naveen N Rao <naveen@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230913134129.2782088-1-naveen@kernel.org
-
Benjamin Gray authored
It can be easy to miss that the notifier mechanism invokes the callbacks in an atomic context, so add some comments to that effect on the two handlers we register here. Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230829063457.54157-4-bgray@linux.ibm.com
-
Benjamin Gray authored
This is called in an atomic context, so is not allowed to sleep if a user page needs to be faulted in and has nowhere it can be deferred to. The pagefault_disabled() function is documented as preventing user access methods from sleeping. In practice the page will be mapped in nearly always because we are reading the instruction that just triggered the watchpoint trap. Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230829063457.54157-3-bgray@linux.ibm.com
-
Benjamin Gray authored
thread_change_pc() uses CPU local data, so must be protected from swapping CPUs while it is reading the breakpoint struct. The error is more noticeable after 1e60f356 ("powerpc/watchpoints: Track perf single step directly on the breakpoint"), which added an unconditional __this_cpu_read() call in thread_change_pc(). However the existing __this_cpu_read() that runs if a breakpoint does need to be re-inserted has the same issue. Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230829063457.54157-2-bgray@linux.ibm.com
-
Kajol Jain authored
Valid domain value is in range 1 to HV_PERF_DOMAIN_MAX. Current code has check for domain value greater than or equal to HV_PERF_DOMAIN_MAX. But the check for domain value 0 is missing. Fix this issue by adding check for domain value 0. Before: # ./perf stat -v -e hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ sleep 1 Using CPUID 00800200 Control descriptor is not initialized Error: The sys_perf_event_open() syscall returned with 5 (Input/output error) for event (hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/). /bin/dmesg | grep -i perf may provide additional information. Result from dmesg: [ 37.819387] hv-24x7: hcall failed: [0 0x60040000 0x100 0] => ret 0xfffffffffffffffc (-4) detail=0x2000000 failing ix=0 After: # ./perf stat -v -e hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ sleep 1 Using CPUID 00800200 Control descriptor is not initialized Warning: hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ event is not supported by the kernel. failed to read counter hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ Fixes: ebd4a5a3 ("powerpc/perf/hv-24x7: Minor improvements") Reported-by: Krishan Gopal Sarawast <krishang@linux.vnet.ibm.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Tested-by: Disha Goel <disgoel@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230825055601.360083-1-kjain@linux.ibm.com
-
- 17 Sep, 2023 11 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Misc fixes: - Fix an UV boot crash - Skip spurious ENDBR generation on _THIS_IP_ - Fix ENDBR use in putuser() asm methods - Fix corner case boot crashes on 5-level paging - and fix a false positive WARNING on LTO kernels" * tag 'x86-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/purgatory: Remove LTO flags x86/boot/compressed: Reserve more memory for page tables x86/ibt: Avoid duplicate ENDBR in __put_user_nocheck*() x86/ibt: Suppress spurious ENDBR x86/platform/uv: Use alternate source for socket to node data
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Fix a performance regression on large SMT systems, an Intel SMT4 balancing bug, and a topology setup bug on (Intel) hybrid processors" * tag 'sched-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sched: Restore the SD_ASYM_PACKING flag in the DIE domain sched/fair: Fix SMT4 group_smt_balance handling sched/fair: Optimize should_we_balance() for large SMT systems
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull objtool fix from Ingo Molnar: "Fix a cold functions related false-positive objtool warning that triggers on Clang" * tag 'objtool-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix _THIS_IP_ detection for cold functions
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull WARN fix from Ingo Molnar: "Fix a missing preempt-enable in the WARN() slowpath" * tag 'core-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: panic: Reenable preemption in WARN slowpath
-
Linus Torvalds authored
The choose_32_64() macros were added to deal with an odd inconsistency between the 32-bit and 64-bit layout of 'struct stat' way back when in commit a52dd971 ("vfs: de-crapify "cp_new_stat()" function"). Then a decade later Mikulas noticed that said inconsistency had been a mistake in the early x86-64 port, and shouldn't have existed in the first place. So commit 932aba1e ("stat: fix inconsistency between struct stat and struct compat_stat") removed the uses of the helpers. But the helpers remained around, unused. Get rid of them. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull smb client fixes from Steve French: "Three small SMB3 client fixes, one to improve a null check and two minor cleanups" * tag '6.6-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: smb3: fix some minor typos and repeated words smb3: correct places where ENOTSUPP is used instead of preferred EOPNOTSUPP smb3: move server check earlier when setting channel sequence number
-
git://git.samba.org/ksmbdLinus Torvalds authored
Pull smb server fixes from Steve French: "Two ksmbd server fixes" * tag '6.6-rc1-ksmbd' of git://git.samba.org/ksmbd: ksmbd: fix passing freed memory 'aux_payload_buf' ksmbd: remove unneeded mark_inode_dirty in set_info_sec()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Regression and bug fixes for ext4" * tag 'ext4_for_linus-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix rec_len verify error ext4: do not let fstrim block system suspend ext4: move setting of trimmed bit into ext4_try_to_trim_range() jbd2: Fix memory leak in journal_init_common() jbd2: Remove page size assumptions buffer: Make bh_offset() work for compound pages
-
Song Liu authored
-flto* implies -ffunction-sections. With LTO enabled, ld.lld generates multiple .text sections for purgatory.ro: $ readelf -S purgatory.ro | grep " .text" [ 1] .text PROGBITS 0000000000000000 00000040 [ 7] .text.purgatory PROGBITS 0000000000000000 000020e0 [ 9] .text.warn PROGBITS 0000000000000000 000021c0 [13] .text.sha256_upda PROGBITS 0000000000000000 000022f0 [15] .text.sha224_upda PROGBITS 0000000000000000 00002be0 [17] .text.sha256_fina PROGBITS 0000000000000000 00002bf0 [19] .text.sha224_fina PROGBITS 0000000000000000 00002cc0 This causes WARNING from kexec_purgatory_setup_sechdrs(): WARNING: CPU: 26 PID: 110894 at kernel/kexec_file.c:919 kexec_load_purgatory+0x37f/0x390 Fix this by disabling LTO for purgatory. [ AFAICT, x86 is the only arch that supports LTO and purgatory. ] We could also fix this with an explicit linker script to rejoin .text.* sections back into .text. However, given the benefit of LTOing purgatory is small, simply disable the production of more .text.* sections for now. Fixes: b33fff07 ("x86, build: allow LTO to be selected") Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Link: https://lore.kernel.org/r/20230914170138.995606-1-song@kernel.org
-
Kirill A. Shutemov authored
The decompressor has a hard limit on the number of page tables it can allocate. This limit is defined at compile-time and will cause boot failure if it is reached. The kernel is very strict and calculates the limit precisely for the worst-case scenario based on the current configuration. However, it is easy to forget to adjust the limit when a new use-case arises. The worst-case scenario is rarely encountered during sanity checks. In the case of enabling 5-level paging, a use-case was overlooked. The limit needs to be increased by one to accommodate the additional level. This oversight went unnoticed until Aaron attempted to run the kernel via kexec with 5-level paging and unaccepted memory enabled. Update wost-case calculations to include 5-level paging. To address this issue, let's allocate some extra space for page tables. 128K should be sufficient for any use-case. The logic can be simplified by using a single value for all kernel configurations. [ Also add a warning, should this memory run low - by Dave Hansen. ] Fixes: 34bbb000 ("x86/boot/compressed: Enable 5-level paging during decompression stage") Reported-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20230915070221.10266-1-kirill.shutemov@linux.intel.com
-
- 16 Sep, 2023 12 commits
-
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix kernel-devel RPM and linux-headers Deb package - Fix too long argument list error in 'make modules_install' * tag 'kbuild-fixes-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: avoid long argument lists in make modules_install kbuild: fix kernel-devel RPM package and linux-headers Deb package
-
Linus Torvalds authored
Commit 408579cd ("mm: Update do_vmi_align_munmap() return semantics") seems to have updated one of the callers of do_vmi_munmap() incorrectly: it used to check for the error case (which didn't change: negative means error). That commit changed the check to the success case (which did change: before that commit, 0 was success, and 1 was "success and lock downgraded". After the change, it's always 0 for success, and the lock will have been released if requested). This didn't change any actual VM behavior _except_ for memory accounting when 'VM_ACCOUNT' was set on the vma. Which made the wrong return value test fairly subtle, since everything continues to work. Or rather - it continues to work but the "Committed memory" accounting goes all wonky (Committed_AS value in /proc/meminfo), and depending on settings that then causes problems much much later as the VM relies on bogus statistics for its heuristics. Revert that one line of the change back to the original logic. Fixes: 408579cd ("mm: Update do_vmi_align_munmap() return semantics") Reported-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de> Reported-bisected-and-tested-by: Michael Labiuk <michael.labiuk@virtuozzo.com> Cc: Bagas Sanjaya <bagasdotme@gmail.com> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Link: https://lore.kernel.org/all/1694366957@msgid.manchmal.in-ulm.de/Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "16 small(ish) fixes all in drivers. The major fixes are in pm8001 (fixes MSI-X issue going back to its origin), the qla2xxx endianness fix, which fixes a bug on big endian and the lpfc ones which can cause an oops on module removal without them" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: lpfc: Prevent use-after-free during rmmod with mapped NVMe rports scsi: lpfc: Early return after marking final NLP_DROPPED flag in dev_loss_tmo scsi: lpfc: Fix the NULL vs IS_ERR() bug for debugfs_create_file() scsi: target: core: Fix target_cmd_counter leak scsi: pm8001: Setup IRQs on resume scsi: pm80xx: Avoid leaking tags when processing OPC_INB_SET_CONTROLLER_CONFIG command scsi: pm80xx: Use phy-specific SAS address when sending PHY_START command scsi: ufs: core: Poll HCS.UCRDY before issuing a UIC command scsi: ufs: core: Move __ufshcd_send_uic_cmd() outside host_lock scsi: qedf: Add synchronization between I/O completions and abort scsi: target: Replace strlcpy() with strscpy() scsi: qla2xxx: Fix NULL vs IS_ERR() bug for debugfs_create_dir() scsi: qla2xxx: Use raw_smp_processor_id() instead of smp_processor_id() scsi: qla2xxx: Correct endianness for rqstlen and rsplen scsi: ppa: Fix accidentally reversed conditions for 16-bit and 32-bit EPP scsi: megaraid_sas: Fix deadlock on firmware crashdump
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libataLinus Torvalds authored
Pull ata fixes from Damien Le Moal: - Fix link power management transitions to disallow unsupported states (Niklas) - A small string handling fix for the sata_mv driver (Christophe) - Clear port pending interrupts before reset, as per AHCI specifications (Szuying). Followup fixes for this one are to not clear ATA_PFLAG_EH_PENDING in ata_eh_reset() to allow EH to continue on with other actions recorded with error interrupts triggered before EH completes. And an additional fix to avoid thawing a port twice in EH (Niklas) - Small code style fixes in the pata_parport driver to silence the build bot as it keeps complaining about bad indentation (me) - A fix for the recent CDL code to avoid fetching sense data for successful commands when not necessary for correct operation (Niklas) * tag 'ata-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: libata-core: fetch sense data for successful commands iff CDL enabled ata: libata-eh: do not thaw the port twice in ata_eh_reset() ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset() ata: pata_parport: Fix code style issues ata: libahci: clear pending interrupt status ata: sata_mv: Fix incorrect string length computation in mv_dump_mem() ata: libata: disallow dev-initiated LPM transitions to unsupported states
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fix from Greg KH: "Here is a single USB fix for a much-reported regression for 6.6-rc1. It resolves a crash in the typec debugfs code for many systems. It's been in linux-next with no reported issues, and many people have reported it resolving their problem with 6.6-rc1" * tag 'usb-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: ucsi: Fix NULL pointer dereference
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull driver core fixes from Greg KH: "Here is a single driver core fix for a much-reported-by-sysbot issue that showed up in 6.6-rc1. It's been submitted by many people, all in the same way, so it obviously fixes things for them all. Also in here is a single documentation update adding riscv to the embargoed hardware document in case there are any future issues with that processor family. Both of these have been in linux-next with no reported problems" * tag 'driver-core-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Documentation: embargoed-hardware-issues.rst: Add myself for RISC-V driver core: return an error when dev_set_name() hasn't happened
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc fix from Greg KH: "Here is a single patch for 6.6-rc2 that reverts a 6.5 change for the comedi subsystem that has ended up being incorrect and caused drivers that were working for people to be unable to be able to be selected to build at all. To fix this, the Kconfig change needs to be reverted and a future set of fixes for the ioport dependancies will show up in 6.7-rc1 (there's no rush for them.) This has been in linux-next with no reported issues" * tag 'char-misc-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Revert "comedi: add HAS_IOPORT dependencies"
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "The main thing is the removal of 'probe_new' because all i2c client drivers are converted now. Thanks Uwe, this marks the end of a long conversion process. Other than that, we have a few Kconfig updates and driver bugfixes" * tag 'i2c-for-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: cadence: Fix the kernel-doc warnings i2c: aspeed: Reset the i2c controller when timeout occurs i2c: I2C_MLXCPLD on ARM64 should depend on ACPI i2c: Make I2C_ATR invisible i2c: Drop legacy callback .probe_new() w1: ds2482: Switch back to use struct i2c_driver's .probe()
-
Niklas Cassel authored
Currently, we fetch sense data for a _successful_ command if either: 1) Command was NCQ and ATA_DFLAG_CDL_ENABLED flag set (flag ATA_DFLAG_CDL_ENABLED will only be set if the Successful NCQ command sense data supported bit is set); or 2) Command was non-NCQ and regular sense data reporting is enabled. This means that case 2) will trigger for a non-NCQ command which has ATA_SENSE bit set, regardless if CDL is enabled or not. This decision was by design. If the device reports that it has sense data available, it makes sense to fetch that sense data, since the sk/asc/ascq could be important information regardless if CDL is enabled or not. However, the fetching of sense data for a successful command is done via ATA EH. Considering how intricate the ATA EH is, we really do not want to invoke ATA EH unless absolutely needed. Before commit 18bd7718 ("scsi: ata: libata: Handle completion of CDL commands using policy 0xD") we never fetched sense data for successful commands. In order to not invoke the ATA EH unless absolutely necessary, even if the device claims support for sense data reporting, only fetch sense data for successful (NCQ and non-NCQ commands) commands that are using CDL. [Damien] Modified the check to test the qc flag ATA_QCFLAG_HAS_CDL instead of the device support for CDL, which is implied for commands using CDL. Fixes: 3ac873c7 ("ata: libata-core: fix when to fetch sense data for successful commands") Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
-
Niklas Cassel authored
commit 1e641060 ("libata: clear eh_info on reset completion") added a workaround that broke the retry mechanism in ATA EH. Tejun himself suggested to remove this workaround when it was identified to cause additional problems: https://lore.kernel.org/linux-ide/20110426135027.GI878@htj.dyndns.org/ He even said: "Hmm... it seems I wasn't thinking straight when I added that work around." https://lore.kernel.org/linux-ide/20110426155229.GM878@htj.dyndns.org/ While removing the workaround solved the issue, however, the workaround was kept to avoid "spurious hotplug events during reset", and instead another workaround was added on top of the existing workaround in commit 8c56cacc ("libata: fix unexpectedly frozen port after ata_eh_reset()"). Because these IRQs happened when the port was frozen, we know that they were actually a side effect of PxIS and IS.IPS(x) not being cleared before the COMRESET. This is now done in commit 94152042eaa9 ("ata: libahci: clear pending interrupt status"), so these workarounds can now be removed. Since commit 1e641060 ("libata: clear eh_info on reset completion") has now been reverted, the ATA EH retry mechanism is functional again, so there is once again no need to thaw the port more than once in ata_eh_reset(). This reverts "the workaround on top of the workaround" introduced in commit 8c56cacc ("libata: fix unexpectedly frozen port after ata_eh_reset()"). Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
-
Niklas Cassel authored
ata_scsi_port_error_handler() starts off by clearing ATA_PFLAG_EH_PENDING, before calling ap->ops->error_handler() (without holding the ap->lock). If an error IRQ is received while ap->ops->error_handler() is running, the irq handler will set ATA_PFLAG_EH_PENDING. Once ap->ops->error_handler() returns, ata_scsi_port_error_handler() checks if ATA_PFLAG_EH_PENDING is set, and if it is, another iteration of ATA EH is performed. The problem is that ATA_PFLAG_EH_PENDING is not only cleared by ata_scsi_port_error_handler(), it is also cleared by ata_eh_reset(). ata_eh_reset() is called by ap->ops->error_handler(). This additional clearing done by ata_eh_reset() breaks the whole retry logic in ata_scsi_port_error_handler(). Thus, if an error IRQ is received while ap->ops->error_handler() is running, the port will currently remain frozen and will never get re-enabled. The additional clearing in ata_eh_reset() was introduced in commit 1e641060 ("libata: clear eh_info on reset completion"). Looking at the original error report: https://marc.info/?l=linux-ide&m=124765325828495&w=2 We can see the following happening: [ 1.074659] ata3: XXX port freeze [ 1.074700] ata3: XXX hardresetting link, stopping engine [ 1.074746] ata3: XXX flipping SControl [ 1.411471] ata3: XXX irq_stat=400040 CONN|PHY [ 1.411475] ata3: XXX port freeze [ 1.420049] ata3: XXX starting engine [ 1.420096] ata3: XXX rc=0, class=1 [ 1.420142] ata3: XXX clearing IRQs for thawing [ 1.420188] ata3: XXX port thawed [ 1.420234] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) We are not supposed to be able to receive an error IRQ while the port is frozen (PxIE is set to 0, i.e. all IRQs for the port are disabled). AHCI 1.3.1 section 10.7.1.1 First Tier (IS Register) states: "Each bit location can be thought of as reporting a '1' if the virtual "interrupt line" for that port is indicating it wishes to generate an interrupt. That is, if a port has one or more interrupt status bit set, and the enables for those status bits are set, then this bit shall be set." Additionally, AHCI state P:ComInit clearly shows that the state machine will only jump to P:ComInitSetIS (which sets IS.IPS(x) to '1'), if PxIE.PCE is set to '1'. In our case, PxIE is set to 0, so IS.IPS(x) won't get set. So IS.IPS(x) only gets set if PxIS and PxIE is set. AHCI 1.3.1 section 10.7.1.1 First Tier (IS Register) also states: "The bits in this register are read/write clear. It is set by the level of the virtual interrupt line being a set, and cleared by a write of '1' from the software." So if IS.IPS(x) is set, you need to explicitly clear it by writing a 1 to IS.IPS(x) for that port. Since PxIE is cleared, the only way to get an interrupt while the port is frozen, is if IS.IPS(x) is set, and the only way IS.IPS(x) can be set when the port is frozen, is if it was set before the port was frozen. However, since commit 737dd811 ("ata: libahci: clear pending interrupt status"), we clear both PxIS and IS.IPS(x) after freezing the port, but before the COMRESET, so the problem that commit 1e641060 ("libata: clear eh_info on reset completion") fixed can no longer happen. Thus, revert commit 1e641060 ("libata: clear eh_info on reset completion"), so that the retry logic in ata_scsi_port_error_handler() works once again. (The retry logic is still needed, since we can still get an error IRQ _after_ the port has been thawed, but before ata_scsi_port_error_handler() takes the ap->lock in order to check if ATA_PFLAG_EH_PENDING is set.) Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
-
Linus Torvalds authored
Merge tag 'linux-kselftest-fixes-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull more kselftest fixes from Shuah Khan "Fixes to user_events test and ftrace test. The user_events test was enabled by default in Linux 6.6-rc1. The following fixes are for bugs found since then: - add checks for dependencies and skip the test if they aren't met. The user_events test requires root access, and tracefs and user_events enabled. It leaves tracefs mounted and a fix is in progress for that missing piece. - create user_events test-specific Kconfig fragments ftrace test fixes: - unmount tracefs for recovering environment. Fix identified during the above mentioned user_events dependencies fix. - adds softlink to latest log directory improving usage" * tag 'linux-kselftest-fixes-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: tracing: Fix to unmount tracefs for recovering environment selftests: user_events: create test-specific Kconfig fragments ftrace/selftests: Add softlink to latest log directory selftests/user_events: Fix failures when user_events is not installed
-
- 15 Sep, 2023 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linuxLinus Torvalds authored
Pull nfsd fixes from Chuck Lever: - Use correct order when encoding NFSv4 RENAME change_info - Fix a potential oops during NFSD shutdown * tag 'nfsd-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: NFSD: fix possible oops when nfsd/pool_stats is closed. nfsd: fix change_info in NFSv4 RENAME replies
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "Fix the handling of block devices in the test_resume mode of hibernation (Chen Yu)" * tag 'pm-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: hibernate: Fix the exclusive get block device in test_resume mode PM: hibernate: Rename function parameter from snapshot_test to exclusive
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull thermal control fixes from Rafael Wysocki: "These fix a thermal core breakage introduced by one of the recent changes, amend those changes by adding 'const' to a new callback argument and fix two memory leaks. Specifics: - Unbreak disabled trip point check in handle_thermal_trip() that may cause it to skip enabled trip points (Rafael Wysocki) - Add missing of_node_put() to of_find_trip_id() and thermal_of_for_each_cooling_maps() that each break out of a for_each_child_of_node() loop without dropping the reference to the child object (Julia Lawall) - Constify the recently added trip argument of the .get_trend() thermal zone callback (Rafael Wysocki)" * tag 'thermal-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: core: Fix disabled trip point check in handle_thermal_trip() thermal: Constify the trip argument of the .get_trend() zone callback thermal/of: add missing of_node_put()
-
Linus Torvalds authored
Merge tag 'for-6.6/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix DM core retrieve_deps() UAF race due to missing locking of a DM table's list of devices that is managed using dm_{get,put}_device. - Revert DM core's half-baked RCU optimization if IO submitter has set REQ_NOWAIT. Can be revisited, and properly justified, after comprehensively auditing all of DM to also pass GFP_NOWAIT for any allocations if REQ_NOWAIT used. * tag 'for-6.6/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: don't attempt to queue IO under RCU protection dm: fix a race condition in retrieve_deps
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull block fixes from Jens Axboe: - NVMe pull via Keith: - nvme-tcp iov len fix (Varun) - nvme-hwmon const qualifier for safety (Krzysztof) - nvme-fc null pointer checks (Nigel) - nvme-pci no numa node fix (Pratyush) - nvme timeout fix for non-compliant controllers (Keith) - MD pull via Song fixing regressions with both 6.5 and 6.6 - Fix a use-after-free regression in resizing blk-mq tags (Chengming) * tag 'block-6.6-2023-09-15' of git://git.kernel.dk/linux: nvme: avoid bogus CRTO values md: Put the right device in md_seq_next nvme-pci: do not set the NUMA node of device if it has none blk-mq: fix tags UAF when shrinking q->nr_hw_queues md/raid1: fix error: ISO C90 forbids mixed declarations md: fix warning for holder mismatch from export_rdev() md: don't dereference mddev after export_rdev() nvme-fc: Prevent null pointer dereference in nvme_fc_io_getuuid() nvme: host: hwmon: constify pointers to hwmon_channel_info nvmet-tcp: pass iov_len instead of sg->length to bvec_set_page()
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull io_uring fix from Jens Axboe: "Just a single fix, fixing a regression with poll first, recvmsg, and using a provided buffer" * tag 'io_uring-6.6-2023-09-15' of git://git.kernel.dk/linux: io_uring/net: fix iter retargeting for selected buf
-
Linus Torvalds authored
Merge tag 'firewire-fixes-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire fix from Takashi Sakamoto: "A change applied to v6.5 kernel brings an issue that usual GFP allocation is done in atomic context under acquired spin-lock. Let us revert it" * tag 'firewire-fixes-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: Revert "firewire: core: obsolete usage of GFP_ATOMIC at building node tree"
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Regular rc2 fixes pull, mostly made up of amdgpu stuff, one i915, and a bunch of others, one vkms locking violation is reverted. connector: - doc fix exec: - workaround lockdep issue tests: - fix a UAF vkms: - revert hrtimer fix fbdev: - g364fb: fix build failure with mips i915: - Only check eDP HPD when AUX CH is shared. amdgpu: - GC 9.4.3 fixes - Fix white screen issues with S/G display on system with >= 64G of ram - Replay fixes - SMU 13.0.6 fixes - AUX backlight fix - NBIO 4.3 SR-IOV fixes for HDP - RAS fixes - DP MST resume fix - Fix segfault on systems with no vbios - DPIA fixes amdkfd: - CWSR grace period fix - Unaligned doorbell fix - CRIU fix for GFX11 - Add missing TLB flush on gfx10 and newer radeon: - make fence wait in suballocator uninterrruptable gm12u320: - Fix the timeout usage for usb_bulk_msg()" * tag 'drm-fixes-2023-09-15' of git://anongit.freedesktop.org/drm/drm: (29 commits) drm/tests: helpers: Avoid a driver uaf Revert "drm/vkms: Fix race-condition between the hrtimer and the atomic commit" drm/amdkfd: Insert missing TLB flush on GFX10 and later drm/i915: Only check eDP HPD when AUX CH is shared drm/amd/display: Fix 2nd DPIA encoder Assignment drm/amd/display: Add DPIA Link Encoder Assignment Fix drm/amd/display: fix replay_mode kernel-doc warning drm/amdgpu: Handle null atom context in VBIOS info ioctl drm/amdkfd: Checkpoint and restore queues on GFX11 drm/amd/display: Adjust the MST resume flow drm/amdgpu: fallback to old RAS error message for aqua_vanjaram drm/amdgpu/nbio4.3: set proper rmmio_remap.reg_offset for SR-IOV drm/amdgpu/soc21: don't remap HDP registers for SR-IOV drm/amd/display: Don't check registers, if using AUX BL control drm/amdgpu: fix retry loop test drm/amd/display: Add dirty rect support for Replay Revert "drm/amd: Disable S/G for APUs when 64GB or more host memory" drm/amd/display: fix the white screen issue when >= 64GB DRAM drm/amdkfd: Update CU masking for GFX 9.4.3 drm/amdkfd: Update cache info reporting for GFX v9.4.3 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efiLinus Torvalds authored
Pull EFI fixes from Ard Biesheuvel: - Missing x86 patch for the runtime cleanup that was merged in -rc1 - Kconfig tweak for kexec on x86 so EFI support does not get disabled inadvertently - Use the right EFI memory type for the unaccepted memory table so kexec/kdump exposes it to the crash kernel as well - Work around EFI implementations which do not implement QueryVariableInfo, which is now called by statfs() on efivarfs * tag 'efi-fixes-for-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efivarfs: fix statfs() on efivarfs efi/unaccepted: Use ACPI reclaim memory for unaccepted memory table efi/x86: Ensure that EFI_RUNTIME_MAP is enabled for kexec efi/x86: Move EFI runtime call setup/teardown helpers out of line
-
Jens Axboe authored
dm looks up the table for IO based on the request type, with an assumption that if the request is marked REQ_NOWAIT, it's fine to attempt to submit that IO while under RCU read lock protection. This is not OK, as REQ_NOWAIT just means that we should not be sleeping waiting on other IO, it does not mean that we can't potentially schedule. A simple test case demonstrates this quite nicely: int main(int argc, char *argv[]) { struct iovec iov; int fd; fd = open("/dev/dm-0", O_RDONLY | O_DIRECT); posix_memalign(&iov.iov_base, 4096, 4096); iov.iov_len = 4096; preadv2(fd, &iov, 1, 0, RWF_NOWAIT); return 0; } which will instantly spew: BUG: sleeping function called from invalid context at include/linux/sched/mm.h:306 in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 5580, name: dm-nowait preempt_count: 0, expected: 0 RCU nest depth: 1, expected: 0 INFO: lockdep is turned off. CPU: 7 PID: 5580 Comm: dm-nowait Not tainted 6.6.0-rc1-g39956d2dcd81 #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x11d/0x1b0 __might_resched+0x3c3/0x5e0 ? preempt_count_sub+0x150/0x150 mempool_alloc+0x1e2/0x390 ? mempool_resize+0x7d0/0x7d0 ? lock_sync+0x190/0x190 ? lock_release+0x4b7/0x670 ? internal_get_user_pages_fast+0x868/0x2d40 bio_alloc_bioset+0x417/0x8c0 ? bvec_alloc+0x200/0x200 ? internal_get_user_pages_fast+0xb8c/0x2d40 bio_alloc_clone+0x53/0x100 dm_submit_bio+0x27f/0x1a20 ? lock_release+0x4b7/0x670 ? blk_try_enter_queue+0x1a0/0x4d0 ? dm_dax_direct_access+0x260/0x260 ? rcu_is_watching+0x12/0xb0 ? blk_try_enter_queue+0x1cc/0x4d0 __submit_bio+0x239/0x310 ? __bio_queue_enter+0x700/0x700 ? kvm_clock_get_cycles+0x40/0x60 ? ktime_get+0x285/0x470 submit_bio_noacct_nocheck+0x4d9/0xb80 ? should_fail_request+0x80/0x80 ? preempt_count_sub+0x150/0x150 ? lock_release+0x4b7/0x670 ? __bio_add_page+0x143/0x2d0 ? iov_iter_revert+0x27/0x360 submit_bio_noacct+0x53e/0x1b30 submit_bio_wait+0x10a/0x230 ? submit_bio_wait_endio+0x40/0x40 __blkdev_direct_IO_simple+0x4f8/0x780 ? blkdev_bio_end_io+0x4c0/0x4c0 ? stack_trace_save+0x90/0xc0 ? __bio_clone+0x3c0/0x3c0 ? lock_release+0x4b7/0x670 ? lock_sync+0x190/0x190 ? atime_needs_update+0x3bf/0x7e0 ? timestamp_truncate+0x21b/0x2d0 ? inode_owner_or_capable+0x240/0x240 blkdev_direct_IO.part.0+0x84a/0x1810 ? rcu_is_watching+0x12/0xb0 ? lock_release+0x4b7/0x670 ? blkdev_read_iter+0x40d/0x530 ? reacquire_held_locks+0x4e0/0x4e0 ? __blkdev_direct_IO_simple+0x780/0x780 ? rcu_is_watching+0x12/0xb0 ? __mark_inode_dirty+0x297/0xd50 ? preempt_count_add+0x72/0x140 blkdev_read_iter+0x2a4/0x530 do_iter_readv_writev+0x2f2/0x3c0 ? generic_copy_file_range+0x1d0/0x1d0 ? fsnotify_perm.part.0+0x25d/0x630 ? security_file_permission+0xd8/0x100 do_iter_read+0x31b/0x880 ? import_iovec+0x10b/0x140 vfs_readv+0x12d/0x1a0 ? vfs_iter_read+0xb0/0xb0 ? rcu_is_watching+0x12/0xb0 ? rcu_is_watching+0x12/0xb0 ? lock_release+0x4b7/0x670 do_preadv+0x1b3/0x260 ? do_readv+0x370/0x370 __x64_sys_preadv2+0xef/0x150 do_syscall_64+0x39/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f5af41ad806 Code: 41 54 41 89 fc 55 44 89 c5 53 48 89 cb 48 83 ec 18 80 3d e4 dd 0d 00 00 74 7a 45 89 c1 49 89 ca 45 31 c0 b8 47 01 00 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 be 00 00 00 48 85 c0 79 4a 48 8b 0d da 55 RSP: 002b:00007ffd3145c7f0 EFLAGS: 00000246 ORIG_RAX: 0000000000000147 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5af41ad806 RDX: 0000000000000001 RSI: 00007ffd3145c850 RDI: 0000000000000003 RBP: 0000000000000008 R08: 0000000000000000 R09: 0000000000000008 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003 R13: 00007ffd3145c850 R14: 000055f5f0431dd8 R15: 0000000000000001 </TASK> where in fact it is dm itself that attempts to allocate a bio clone with GFP_NOIO under the rcu read lock, regardless of the request type. Fix this by getting rid of the special casing for REQ_NOWAIT, and just use the normal SRCU protected table lookup. Get rid of the bio based table locking helpers at the same time, as they are now unused. Cc: stable@vger.kernel.org Fixes: 563a225c ("dm: introduce dm_{get,put}_live_table_bio called from dm_submit_bio") Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
-