- 01 Apr, 2019 6 commits
-
-
Shamir Rabinovitch authored
The uverbs_attr_bundle with the ucontext is sent down to the drivers ib_x destroy path as ib_udata. The next patch will use the ib_udata to free the drivers destroy path from the dependency in 'uobject->context' as we already did for the create path. Signed-off-by:
Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Shamir Rabinovitch authored
Pass uverbs_attr_bundle down the uobject destroy path. The next patch will use this to eliminate the dependecy of the drivers in ib_x->uobject pointers. Signed-off-by:
-
Shamir Rabinovitch authored
the Attempt to use the below commit to initialize the ucontext for the uobject destroy path has shown that the below commit is incomplete. Parts were reverted and the ucontext set up in the uverbs_attr_bundle was moved to rdma_lookup_get_uobject which is called from the uobj_get_XXX macros and rdma_alloc_begin_uobject which is called when uobject is created. Fixes: 3d9dfd06 ("IB/uverbs: Add ib_ucontext to uverbs_attr_bundle sent from ioctl and cmd flows") Signed-off-by:
-
Matthew Wilcox authored
Signed-off-by:
Matthew Wilcox <willy@infradead.org> Signed-off-by:
-
Matthew Wilcox authored
Also remove qib_devs_list. Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
-
Matthew Wilcox authored
Also remove hfi1_devs_list. Signed-off-by:
-
- 29 Mar, 2019 7 commits
-
-
Leon Romanovsky authored
There is no need to perform extra comparison after boolean AND. Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Reviewed-by:
-
Leon Romanovsky authored
Delete structure which is not connected due to removal in commit cited in Fixes line. Fixes: a78e8723 ("RDMA/cma: Remove CM_ID statistics provided by rdma-cm module") Signed-off-by:
-
Matthew Wilcox authored
Signed-off-by:
-
Matthew Wilcox authored
Signed-off-by:
-
Matthew Wilcox authored
Signed-off-by:
-
Matthew Wilcox authored
Also fully initialise the qp before storing it in the XArray. Signed-off-by:
-
Matthew Wilcox authored
Change the locking to not disable interrupts as the lookup in interrupt context will not see a freed CQ, thanks to the synchronize_irq() call before freeing the CQ. Signed-off-by:
-
- 28 Mar, 2019 20 commits
-
-
Parav Pandit authored
Add netlink command that enables/disables sharing rdma device among multiple net namespaces. Using rdma tool, $rdma sys set netns shared (default mode) When rdma subsystem netns mode is set to shared mode, rdma devices will be accessible in all net namespaces. Using rdma tool, $rdma sys set netns exclusive When rdma subsystem netns mode is set to exclusive mode, devices will be accessible in only one net namespace at any given point of time. If there are any net namespaces other than default init_net exists, while executing this command, it will fail and mode cannot be changed. To change this mode, netlink command is used instead of sysctl, because netlink command allows to auto load a module. Signed-off-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
-
Parav Pandit authored
Add an interface via netlink command to query whether rdma devices are shared among multiple net namespaces or not. When using RDMAtool, it can be queried as, $rdma system show netns netns shared Signed-off-by:
-
Parav Pandit authored
Extend ib_device_get_by_index() API to check device access for net namespace for serving netlink commands. Also enforce net ns check on dumpit commands which iterate over all registered rdma devices and which don't call ib_device_get_by_index(). Signed-off-by:
-
Parav Pandit authored
Introduce an API rdma_dev_access_netns() to check whether a rdma device can be accessed from the specified net namespace or not. Use rdma_dev_access_netns() while opening character uverbs, umad network device and also check while rdma cm_id binds to rdma device. Signed-off-by:
-
Parav Pandit authored
Add module parameter to change a sharing mode of ib_core early in the boot process. This parameter helps to those systems where modern up to date rdma tool (iproute2) package may not be available during kernel upgrade cycle. Signed-off-by:
-
Parav Pandit authored
Now that sysfs compatibility layer for non init_net exists, add core port attributes such as pkey and gid table to non init_net ns. Signed-off-by:
-
Parav Pandit authored
Implement compatibility layer sysfs entries of ib_core so that non init_net net namespaces can also discover rdma devices. Each non init_net net namespace has ib_core_device created in it. Such ib_core_device sysfs tree resembles rdma devices found in init_net namespace. This allows discovering rdma devices in multiple non init_net net namespaces via sysfs entries and helpful to rdma-core userspace. Signed-off-by:
-
Parav Pandit authored
This is a preparation patch to provide isolation of rdma device in a network namespace. As first step, make rdma device visible only in init net namespace. Subsequent patch will enable rdma device visibility back in multiple net namespaces using compat ib_core_device device/sysfs tree. Given that the IB subsystem depends on net stack, it needs to be initialized after netdev and since it support devices, it needs to be initialized before the device subsystem; therefore, change initcall sequence to fs_initcall, so that when ib_core is compiled in the kernel image, the right init sequence is followed. Signed-off-by:
-
Parav Pandit authored
In order to support sysfs entries in multiple net namespaces for a rdma device, introduce a ib_core_device whose scope is limited to hold core device and per port sysfs related entries. This is preparation patch so that multiple ib_core_devices in each net namespace can be created in subsequent patch who all can share ib_device. (a) Move sysfs specific fields to ib_core_device. (b) Make sysfs and device life cycle related routines to work on ib_core_device. (c) Introduce and use rdma_init_coredev() helper to initialize coredev fields. Signed-off-by: -
Shiraz Saleem authored
The buffer that holds the page DMA addresses is sized off umem->nmap. This can potentially cause out of bound accesses on the PBL array when iterating the umem DMA-mapped SGL. This is because if umem pages are combined, umem->nmap can be much lower than the number of system pages in umem. Use ib_umem_num_pages() to size this buffer. Cc: Dennis Dalessandro <dennis.dalessandro@intel.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by:
-
Shiraz Saleem authored
The buffer that holds the page DMA addresses is sized off umem->nmap. This can potentially cause out of bound accesses on the PBL array when iterating the umem DMA-mapped SGL. This is because if umem pages are combined, umem->nmap can be much lower than the number of system pages in umem. Use ib_umem_num_pages() to size this buffer. Cc: Moni Shoua <monis@mellanox.com> Signed-off-by:
-
Shiraz Saleem authored
The buffer that holds the page DMA addresses is sized off umem->nmap. This can potentially cause out of bound accesses on the PBL array when iterating the umem DMA-mapped SGL. This is because if umem pages are combined, umem->nmap can be much lower than the number of system pages in umem. Use ib_umem_num_pages() to size this buffer. Signed-off-by:
-
Shiraz Saleem authored
The PBL array that hold the page DMA address is sized off umem->nmap. This can potentially cause out of bound accesses on the PBL array when iterating the umem DMA-mapped SGL. This is because if umem pages are combined, umem->nmap can be much lower than the number of system pages in umem. Use ib_umem_num_pages() to size this array. Cc: Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by:
-
Selvin Xavier authored
umem->nmap is used while allocating internal buffer for storing page DMA addresses. This causes out of bounds array access while iterating the umem DMA-mapped SGL with umem page combining as umem->nmap can be less than number of system pages in umem. Use ib_umem_num_pages() instead of umem->nmap to size the page array. Add a new structure (bnxt_qplib_sg_info) to pass sglist, npages and nmap. Signed-off-by:
Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by:
-
Bart Van Assche authored
This patch avoids that a compiler warning is reported when building with W=1. Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Bart Van Assche authored
Enable format string checking for hfi1_cdbg() and fix the resulting compiler warnings. Signed-off-by:
-
Bart Van Assche authored
Avoid that sparse complains about a missing declaration. Reviewed-by:
-
Bart Van Assche authored
This patch avoids that sparse reports the following warnings: drivers/infiniband/core/uverbs_std_types_flow_action.c:442:30: warning: symbol 'uverbs_def_obj_flow_action' was not declared. Should it be static? drivers/infiniband/core/uverbs_std_types_dm.c:112:30: warning: symbol 'uverbs_def_obj_dm' was not declared. Should it be static? drivers/infiniband/core/uverbs_std_types_counters.c:153:30: warning: symbol 'uverbs_def_obj_counters' was not declared. Should it be static? drivers/infiniband/core/uverbs_std_types_mr.c:213:30: warning: symbol 'uverbs_def_obj_mr' was not declared. Should it be static? Reviewed-by:
-
Bart Van Assche authored
This patch avoids that sparse complains about a mismatch between the returned value and the function return type. Reviewed-by:
-
Bart Van Assche authored
This patch avoids that sparse and smatch report the following: warning: cast removes address space of expression Reviewed-by:
-
- 27 Mar, 2019 7 commits
-
-
Zhu Yanjun authored
In the function rxe_init_packet, based on av->network_type, skb->protocol is set to ipv4 or ipv6. The functions rxe_prepare and rxe_send are called after the functin rxe_init_packet. So in these functions, av->network_type can be replaced with skb->protocol. The functions are in the xmit fast path. So with skb->protocol, the performance will be better. Signed-off-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by:
-
Ira Weiny authored
Provide a count of class types for a summary of MAD packets. The example shows one way to filter the trace data based on management class. Signed-off-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
-
Ira Weiny authored
Decode more information from the packet and include it in the trace. Reviewed-by:
"Ruhl, Michael J" <michael.j.ruhl@intel.com> Signed-off-by:
-
Ira Weiny authored
Trace MADs going to/from user space. Suggested-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Ira Weiny authored
Trace agent details when agents are [un]registered. In addition, report agent details on send/recv. Reviewed-by:
-
Ira Weiny authored
Trace received MAD details. Reviewed-by:
-
Ira Weiny authored
Use the standard Linux trace mechanism to trace MADs being sent. 4 trace points are added, when the MAD is posted to the qp, when the MAD is completed, if a MAD is resent, and when the MAD completes in error. Reviewed-by:
-
