- 17 May, 2023 12 commits
-
-
Vladimir Oltean authored
The XPCS expects clause 73 (copper backplane) autoneg to follow the ethtool autoneg bit. It actually did that until the blamed commit inaptly replaced state->an_enabled (coming from ethtool) with phylink_autoneg_inband() (coming from the device tree or struct phylink_config), as part of an unrelated phylink_pcs API conversion. Russell King suggests that state->an_enabled from the original code was just a proxy for the ethtool Autoneg bit, and that the correct way of restoring the functionality is to check for this bit in the advertising mask. Fixes: 11059740 ("net: pcs: xpcs: convert to phylink_pcs_ops") Link: https://lore.kernel.org/netdev/ZGNt2MFeRolKGFck@shell.armlinux.org.uk/Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
M Chetan Kumar authored
In suspend and resume cycle, the removal and rescan of device ends up in NULL pointer dereference. During driver initialization, if the ipc_imem_wwan_channel_init() fails to get the valid device capabilities it returns an error and further no resource (wwan struct) will be allocated. Now in this situation if driver removal procedure is initiated it would result in NULL pointer exception since unallocated wwan struct is dereferenced inside ipc_wwan_deinit(). ipc_imem_run_state_worker() to handle the called functions return value and to release the resource in failure case. It also reports the link down event in failure cases. The user space application can handle this event to do a device reset for restoring the device communication. Fixes: 3670970d ("net: iosm: shared memory IPC interface") Reported-by: Samuel Wein PhD <sam@samwein.com> Closes: https://lore.kernel.org/netdev/20230427140819.1310f4bd@kernel.org/T/Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
syzbot triggered the following splat [1], sending an empty message through pppoe_sendmsg(). When VLAN_FLAG_REORDER_HDR flag is set, vlan_dev_hard_header() does not push extra bytes for the VLAN header, because vlan is offloaded. Unfortunately vlan_dev_hard_start_xmit() first reads veth->h_vlan_proto before testing (vlan->flags & VLAN_FLAG_REORDER_HDR). We need to swap the two conditions. [1] BUG: KMSAN: uninit-value in vlan_dev_hard_start_xmit+0x171/0x7f0 net/8021q/vlan_dev.c:111 vlan_dev_hard_start_xmit+0x171/0x7f0 net/8021q/vlan_dev.c:111 __netdev_start_xmit include/linux/netdevice.h:4883 [inline] netdev_start_xmit include/linux/netdevice.h:4897 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x253/0xa20 net/core/dev.c:3596 __dev_queue_xmit+0x3c7f/0x5ac0 net/core/dev.c:4246 dev_queue_xmit include/linux/netdevice.h:3053 [inline] pppoe_sendmsg+0xa93/0xb80 drivers/net/ppp/pppoe.c:900 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0xa24/0xe40 net/socket.c:2501 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555 __sys_sendmmsg+0x411/0xa50 net/socket.c:2641 __do_sys_sendmmsg net/socket.c:2670 [inline] __se_sys_sendmmsg net/socket.c:2667 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook+0x12d/0xb60 mm/slab.h:774 slab_alloc_node mm/slub.c:3452 [inline] kmem_cache_alloc_node+0x543/0xab0 mm/slub.c:3497 kmalloc_reserve+0x148/0x470 net/core/skbuff.c:520 __alloc_skb+0x3a7/0x850 net/core/skbuff.c:606 alloc_skb include/linux/skbuff.h:1277 [inline] sock_wmalloc+0xfe/0x1a0 net/core/sock.c:2583 pppoe_sendmsg+0x3af/0xb80 drivers/net/ppp/pppoe.c:867 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0xa24/0xe40 net/socket.c:2501 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555 __sys_sendmmsg+0x411/0xa50 net/socket.c:2641 __do_sys_sendmmsg net/socket.c:2670 [inline] __se_sys_sendmmsg net/socket.c:2667 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd CPU: 0 PID: 29770 Comm: syz-executor.0 Not tainted 6.3.0-rc6-syzkaller-gc478e5b17829 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/30/2023 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
Turns out I missed a few patches due to use of old addresses by senders. Add a mailmap entry with my old addresses. Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Aleksandr Loktionov authored
In igb_hash_mc_addr() the expression: "mc_addr[4] >> 8 - bit_shift", right shifting "mc_addr[4]" shift by more than 7 bits always yields zero, so hash becomes not so different. Add initialization with bit_shift = 1 and add a loop condition to ensure bit_shift will be always in [1..8] range. Fixes: 9d5c8243 ("igb: PCI-Express 82575 Gigabit Ethernet driver") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueDavid S. Miller authored
Tony nguyen says: ==================== Intel Wired LAN Driver Updates 2023-05-16 This series contains updates to ice and iavf drivers. Ahmed adds setting of missed condition for statistics which caused incorrect reporting of values for ice. For iavf, he removes a call to set VLAN offloads during re-initialization which can cause incorrect values to be set. Dawid adds checks to ensure VF is ready to be reset before executing commands that will require it to be reset on ice. --- v2: Patch 2 - Redo commit message ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Marco Migliore authored
According to datasheet, the command opcode must be specified into bits [14:12] of the Extended Port Control register (EPC). Fixes: de776d0d ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by: Marco Migliore <m.migliore@tiesse.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christophe JAILLET authored
cas_saturn_firmware_init() allocates some memory using vmalloc(). This memory is freed in the .remove() function but not it the error handling path of the probe. Add the missing vfree() to avoid a memory leak, should an error occur. Fixes: fcaa4066 ("cassini: use request_firmware") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kuniyuki Iwashima authored
syzkaller reported [0] memory leaks of sk and skb related to the TUN device with no repro, but we can reproduce it easily with: struct ifreq ifr = {} int fd_tun, fd_tmp; char buf[4] = {}; fd_tun = openat(AT_FDCWD, "/dev/net/tun", O_WRONLY, 0); ifr.ifr_flags = IFF_TUN | IFF_NAPI | IFF_MULTI_QUEUE; ioctl(fd_tun, TUNSETIFF, &ifr); ifr.ifr_flags = IFF_DETACH_QUEUE; ioctl(fd_tun, TUNSETQUEUE, &ifr); fd_tmp = socket(AF_PACKET, SOCK_PACKET, 0); ifr.ifr_flags = IFF_UP; ioctl(fd_tmp, SIOCSIFFLAGS, &ifr); write(fd_tun, buf, sizeof(buf)); close(fd_tun); If we enable NAPI and multi-queue on a TUN device, we can put skb into tfile->sk.sk_write_queue after the queue is detached. We should prevent it by checking tfile->detached before queuing skb. Note this must be done under tfile->sk.sk_write_queue.lock because write() and ioctl(IFF_DETACH_QUEUE) can run concurrently. Otherwise, there would be a small race window: write() ioctl(IFF_DETACH_QUEUE) `- tun_get_user `- __tun_detach |- if (tfile->detached) |- tun_disable_queue | `-> false | `- tfile->detached = tun | `- tun_queue_purge |- spin_lock_bh(&queue->lock) `- __skb_queue_tail(queue, skb) Another solution is to call tun_queue_purge() when closing and reattaching the detached queue, but it could paper over another problems. Also, we do the same kind of test for IFF_NAPI_FRAGS. [0]: unreferenced object 0xffff88801edbc800 (size 2048): comm "syz-executor.1", pid 33269, jiffies 4295743834 (age 18.756s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............ backtrace: [<000000008c16ea3d>] __do_kmalloc_node mm/slab_common.c:965 [inline] [<000000008c16ea3d>] __kmalloc+0x4a/0x130 mm/slab_common.c:979 [<000000003addde56>] kmalloc include/linux/slab.h:563 [inline] [<000000003addde56>] sk_prot_alloc+0xef/0x1b0 net/core/sock.c:2035 [<000000003e20621f>] sk_alloc+0x36/0x2f0 net/core/sock.c:2088 [<0000000028e43843>] tun_chr_open+0x3d/0x190 drivers/net/tun.c:3438 [<000000001b0f1f28>] misc_open+0x1a6/0x1f0 drivers/char/misc.c:165 [<000000004376f706>] chrdev_open+0x111/0x300 fs/char_dev.c:414 [<00000000614d379f>] do_dentry_open+0x2f9/0x750 fs/open.c:920 [<000000008eb24774>] do_open fs/namei.c:3636 [inline] [<000000008eb24774>] path_openat+0x143f/0x1a30 fs/namei.c:3791 [<00000000955077b5>] do_filp_open+0xce/0x1c0 fs/namei.c:3818 [<00000000b78973b0>] do_sys_openat2+0xf0/0x260 fs/open.c:1356 [<00000000057be699>] do_sys_open fs/open.c:1372 [inline] [<00000000057be699>] __do_sys_openat fs/open.c:1388 [inline] [<00000000057be699>] __se_sys_openat fs/open.c:1383 [inline] [<00000000057be699>] __x64_sys_openat+0x83/0xf0 fs/open.c:1383 [<00000000a7d2182d>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<00000000a7d2182d>] do_syscall_64+0x3c/0x90 arch/x86/entry/common.c:80 [<000000004cc4e8c4>] entry_SYSCALL_64_after_hwframe+0x72/0xdc unreferenced object 0xffff88802f671700 (size 240): comm "syz-executor.1", pid 33269, jiffies 4295743854 (age 18.736s) hex dump (first 32 bytes): 68 c9 db 1e 80 88 ff ff 68 c9 db 1e 80 88 ff ff h.......h....... 00 c0 7b 2f 80 88 ff ff 00 c8 db 1e 80 88 ff ff ..{/............ backtrace: [<00000000e9d9fdb6>] __alloc_skb+0x223/0x250 net/core/skbuff.c:644 [<000000002c3e4e0b>] alloc_skb include/linux/skbuff.h:1288 [inline] [<000000002c3e4e0b>] alloc_skb_with_frags+0x6f/0x350 net/core/skbuff.c:6378 [<00000000825f98d7>] sock_alloc_send_pskb+0x3ac/0x3e0 net/core/sock.c:2729 [<00000000e9eb3df3>] tun_alloc_skb drivers/net/tun.c:1529 [inline] [<00000000e9eb3df3>] tun_get_user+0x5e1/0x1f90 drivers/net/tun.c:1841 [<0000000053096912>] tun_chr_write_iter+0xac/0x120 drivers/net/tun.c:2035 [<00000000b9282ae0>] call_write_iter include/linux/fs.h:1868 [inline] [<00000000b9282ae0>] new_sync_write fs/read_write.c:491 [inline] [<00000000b9282ae0>] vfs_write+0x40f/0x530 fs/read_write.c:584 [<00000000524566e4>] ksys_write+0xa1/0x170 fs/read_write.c:637 [<00000000a7d2182d>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<00000000a7d2182d>] do_syscall_64+0x3c/0x90 arch/x86/entry/common.c:80 [<000000004cc4e8c4>] entry_SYSCALL_64_after_hwframe+0x72/0xdc Fixes: cde8b15f ("tuntap: add ioctl to attach or detach a file form tuntap device") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecJakub Kicinski authored
Steffen Klassert says: ==================== pull request (net): ipsec 2023-05-16 1) Don't check the policy default if we have an allow policy. Fix from Sabrina Dubroca. 2) Fix netdevice refount usage on offload. From Leon Romanovsky. 3) Use netdev_put instead of dev_puti to correctly release the netdev on failure in xfrm_dev_policy_add. From Leon Romanovsky. 4) Revert "Fix XFRM-I support for nested ESP tunnels" This broke Netfilter policy matching. From Martin Willi. 5) Reject optional tunnel/BEET mode templates in outbound policies on netlink and pfkey sockets. From Tobias Brunner. 6) Check if_id in inbound policy/secpath match to make it symetric to the outbound codepath. From Benedict Wong. * tag 'ipsec-2023-05-16' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec: xfrm: Check if_id in inbound policy/secpath match af_key: Reject optional tunnel/BEET mode templates in outbound policies xfrm: Reject optional tunnel/BEET mode templates in outbound policies Revert "Fix XFRM-I support for nested ESP tunnels" xfrm: Fix leak of dev tracker xfrm: release all offloaded policy memory xfrm: don't check the default policy if the policy allows the packet ==================== Link: https://lore.kernel.org/r/20230516052405.2677554-1-steffen.klassert@secunet.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Merge tag 'linux-can-fixes-for-6.4-20230515' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2023-05-15 The first 2 patches are by Oliver Hartkopp and allow the MSG_CMSG_COMPAT flag for isotp and j1939. The next patch is by Oliver Hartkopp, too and adds missing CAN XL support in can_put_echo_skb(). Geert Uytterhoeven's patch let's the bxcan driver depend on ARCH_STM32. The last 5 patches are from Dario Binacchi and also affect the bxcan driver. The bxcan driver hit mainline with v6.4-rc1 and was originally written for IP cores containing 2 CAN interfaces with shared resources. Dario's series updates the DT bindings and driver to support IP cores with a single CAN interface instance as well as adding the bxcan to the stm32f746's device tree. * tag 'linux-can-fixes-for-6.4-20230515' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: ARM: dts: stm32: add CAN support on stm32f746 can: bxcan: add support for single peripheral configuration ARM: dts: stm32: add pin map for CAN controller on stm32f7 ARM: dts: stm32f429: put can2 in secondary mode dt-bindings: net: can: add "st,can-secondary" property can: CAN_BXCAN should depend on ARCH_STM32 can: dev: fix missing CAN XL support in can_put_echo_skb() can: j1939: recvmsg(): allow MSG_CMSG_COMPAT flag can: isotp: recvmsg(): allow MSG_CMSG_COMPAT flag ==================== Link: https://lore.kernel.org/r/20230515204722.1000957-1-mkl@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Ido Schimmel authored
'__net_initdata' becomes a no-op with CONFIG_NET_NS=y, but when this option is disabled it becomes '__initdata', which means the data can be freed after the initialization phase. This annotation is obviously incorrect for the devlink net device notifier block which is still registered after the initialization phase [1]. Fix this crash by removing the '__net_initdata' annotation. [1] general protection fault, probably for non-canonical address 0xcccccccccccccccc: 0000 [#1] PREEMPT SMP CPU: 3 PID: 117 Comm: (udev-worker) Not tainted 6.4.0-rc1-custom-gdf0acdc5 #64 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014 RIP: 0010:notifier_call_chain+0x58/0xc0 [...] Call Trace: <TASK> dev_set_mac_address+0x85/0x120 dev_set_mac_address_user+0x30/0x50 do_setlink+0x219/0x1270 rtnl_setlink+0xf7/0x1a0 rtnetlink_rcv_msg+0x142/0x390 netlink_rcv_skb+0x58/0x100 netlink_unicast+0x188/0x270 netlink_sendmsg+0x214/0x470 __sys_sendto+0x12f/0x1a0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x38/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: e93c9378 ("devlink: change per-devlink netdev notifier to static one") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Closes: https://lore.kernel.org/netdev/600ddf9e-589a-2aa0-7b69-a438f833ca10@samsung.com/Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230515162925.1144416-1-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 16 May, 2023 4 commits
-
-
Ahmed Zaki authored
When the user disables rxvlan offloading and then changes the number of channels, all VLAN ports are unable to receive traffic. Changing the number of channels triggers a VFR reset. During re-init, when VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS is received, we do: 1 - set the IAVF_FLAG_SETUP_NETDEV_FEATURES flag 2 - call iavf_set_vlan_offload_features(adapter, 0, netdev->features); The second step sends to the PF the __default__ features, in this case aq_required |= IAVF_FLAG_AQ_ENABLE_CTAG_VLAN_STRIPPING While the first step forces the watchdog task to call netdev_update_features() -> iavf_set_features() -> iavf_set_vlan_offload_features(adapter, netdev->features, features). Since the user disabled the "rxvlan", this sets: aq_required |= IAVF_FLAG_AQ_DISABLE_CTAG_VLAN_STRIPPING When we start processing the AQ commands, both flags are enabled. Since we process DISABLE_XTAG first then ENABLE_XTAG, this results in the PF enabling the rxvlan offload. This breaks all communications on the VLAN net devices. Fix by removing the call to iavf_set_vlan_offload_features() (second step). Calling netdev_update_features() from watchdog task is enough for both init and reset paths. Fixes: 7598f4b4 ("iavf: Move netdev_update_features() into watchdog task") Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Dawid Wesierski authored
Fix the current implementation that causes ice_trigger_vf_reset() to start resetting the VF even when the VF-NIC is still initializing. When we reset NIC with ice driver it can interfere with iavf-vf initialization e.g. during consecutive resets induced by ice iavf ice | | |<-----------------| | ice resets vf iavf | reset | start | |<-----------------| | ice resets vf | causing iavf | initialization | error | | iavf reset end This leads to a series of -53 errors (failed to init adminq) from the IAVF. Change the state of the vf_state field to be not active when the IAVF is still initializing. Make sure to wait until receiving the message on the message box to ensure that the vf is ready and initializded. In simple terms we use the ACTIVE flag to make sure that the ice driver knows if the iavf is ready for another reset iavf ice | | | | |<------------- ice resets vf iavf vf_state != ACTIVE reset | start | | | | | iavf | reset-------> vf_state == ACTIVE end ice resets vf | | | | Fixes: c54d209c ("ice: Wait for VF to be reset/ready before configuration") Signed-off-by: Dawid Wesierski <dawidx.wesierski@intel.com> Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com> Acked-by: Jacob Keller <Jacob.e.keller@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Ahmed Zaki authored
After a core PF reset, the VFs were showing wrong Rx/Tx stats. This is a regression in commit 6624e780 ("ice: split ice_vsi_setup into smaller functions") caused by missing to set "stat_offsets_loaded = false" in the ice_vsi_rebuild() path. Fixes: 6624e780 ("ice: split ice_vsi_setup into smaller functions") Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Florian Fainelli authored
Removing the phy_stop() from bcmgenet_netif_stop() ended up causing warnings from the PHY library that phy_start() is called from the RUNNING state since we are no longer stopping the PHY state machine during bcmgenet_suspend(). Restore the call to phy_stop() but make it conditional on being called from the close or suspend path. Fixes: c96e731c ("net: bcmgenet: connect and disconnect from the PHY state machine") Fixes: 93e0401e ("net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop()") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://lore.kernel.org/r/20230515025608.2587012-1-f.fainelli@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
- 15 May, 2023 19 commits
-
-
Marc Kleine-Budde authored
Dario Binacchi <dario.binacchi@amarulasolutions.com> says: The series adds support for managing bxCAN controllers in single peripheral configuration. Unlike stm32f4 SOCs, where bxCAN controllers are only in dual peripheral configuration, stm32f7 SOCs contain three CAN peripherals, CAN1 and CAN2 in dual peripheral configuration and CAN3 in single peripheral configuration: - Dual CAN peripheral configuration: * CAN1: Primary bxCAN for managing the communication between a secondary bxCAN and the 512-byte SRAM memory. * CAN2: Secondary bxCAN with no direct access to the SRAM memory. This means that the two bxCAN cells share the 512-byte SRAM memory and CAN2 can't be used without enabling CAN1. - Single CAN peripheral configuration: * CAN3: Primary bxCAN with dedicated Memory Access Controller unit and 512-byte SRAM memory. The driver has been tested on the stm32f769i-discovery board with a kernel version 5.19.0-rc2 in loopback + silent mode: | ip link set can[0-2] type can bitrate 125000 loopback on listen-only on | ip link set up can[0-2] | candump can[0-2] -L & | cansend can[0-2] 300#AC.AB.AD.AE.75.49.AD.D1 Changes in v2: - s/fiter/filter/ in the commit message - Replace struct bxcan_mb::primary with struct bxcan_mb::cfg. - Move after the patch "can: bxcan: add support for single peripheral configuration". - Add node gcan3. - Rename gcan as gcan1. - Add property "st,can-secondary" to can2 node. - Drop patch "dt-bindings: mfd: stm32f7: add binding definition for CAN3" because it has been accepted. - Add patch "ARM: dts: stm32f429: put can2 in secondary mode". - Add patch "dt-bindings: net: can: add "st,can-secondary" property". v1: https://lore.kernel.org/all/20230423172528.1398158-1-dario.binacchi@amarulasolutions.com Link: https://lore.kernel.org/all/20230427204540.3126234-1-dario.binacchi@amarulasolutions.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Dario Binacchi authored
Add support for bxcan (Basic eXtended CAN controller) to STM32F746. The chip contains three CAN peripherals, CAN1 and CAN2 in dual peripheral configuration and CAN3 in single peripheral configuration: - Dual CAN peripheral configuration: * CAN1: Primary bxCAN for managing the communication between a secondary bxCAN and the 512-byte SRAM memory. * CAN2: Secondary bxCAN with no direct access to the SRAM memory. This means that the two bxCAN cells share the 512-byte SRAM memory and CAN2 can't be used without enabling CAN1. - Single CAN peripheral configuration: * CAN3: Primary bxCAN with dedicated Memory Access Controller unit and 512-byte SRAM memory. ------------------------------------------------------------------------- | features | CAN1 | CAN2 | CAN 3 | ------------------------------------------------------------------------- | SRAM | 512-byte shared between CAN1 & CAN2 | 512-byte | ------------------------------------------------------------------------- | Filters | 26 filters shared between CAN1 & CAN2 | 14 filters | ------------------------------------------------------------------------- Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/all/20230427204540.3126234-6-dario.binacchi@amarulasolutions.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Dario Binacchi authored
Add support for bxCAN controller in single peripheral configuration: - primary bxCAN - dedicated Memory Access Controller unit - 512-byte SRAM memory - 14 filter banks Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/all/20230427204540.3126234-5-dario.binacchi@amarulasolutions.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Dario Binacchi authored
Add pin configurations for using CAN controller on stm32f7. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/all/20230427204540.3126234-4-dario.binacchi@amarulasolutions.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Dario Binacchi authored
This is a preparation patch for the upcoming support to manage CAN peripherals in single configuration. The addition ensures backwards compatibility. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/all/20230427204540.3126234-3-dario.binacchi@amarulasolutions.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Dario Binacchi authored
On the stm32f7 Socs the can peripheral can be in single or dual configuration. In the dual configuration, in turn, it can be in primary or secondary mode. The addition of the 'st,can-secondary' property allows you to specify this mode in the dual configuration. CAN peripheral nodes in single configuration contain neither "st,can-primary" nor "st,can-secondary". Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/all/20230427204540.3126234-2-dario.binacchi@amarulasolutions.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Geert Uytterhoeven authored
The STMicroelectronics STM32 basic extended CAN Controller (bxCAN) is only present on STM32 SoCs. Hence drop the "|| OF" part from its dependency rule, to prevent asking the user about this driver when configuring a kernel without STM32 SoC support. Fixes: f00647d8 ("can: bxcan: add support for ST bxCAN controller") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/all/40095112efd1b2214e4223109fd9f0c6d0158a2d.1680609318.git.geert+renesas@glider.beSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Oliver Hartkopp authored
can_put_echo_skb() checks for the enabled IFF_ECHO flag and the correct ETH_P type of the given skbuff. When implementing the CAN XL support the new check for ETH_P_CANXL has been forgotten. Fixes: fb08cba1 ("can: canxl: update CAN infrastructure for CAN XL frames") Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230506184515.39241-1-socketcan@hartkopp.netSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Oliver Hartkopp authored
The control message provided by J1939 support MSG_CMSG_COMPAT but blocked recvmsg() syscalls that have set this flag, i.e. on 32bit user space on 64 bit kernels. Link: https://github.com/hartkopp/can-isotp/issues/59 Cc: Oleksij Rempel <o.rempel@pengutronix.de> Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/20230505110308.81087-3-mkl@pengutronix.de Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Oliver Hartkopp authored
The control message provided by isotp support MSG_CMSG_COMPAT but blocked recvmsg() syscalls that have set this flag, i.e. on 32bit user space on 64 bit kernels. Link: https://github.com/hartkopp/can-isotp/issues/59 Cc: Oleksij Rempel <o.rempel@pengutronix.de> Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Fixes: 42bf50a1 ("can: isotp: support MSG_TRUNC flag when reading from socket") Link: https://lore.kernel.org/20230505110308.81087-2-mkl@pengutronix.de Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Russell King (Oracle) authored
While testing a Fiberstore SFP-10G-T module (which uses 10GBASE-R with rate adaption) in a Clearfog platform (which can't do that) it was found that the PHYs advertisement was not limited according to the hosts capabilities when using ethtool to change it. Fix this by ensuring that we mask the advertisement with the computed support mask as the very first thing we do. Fixes: cbc1bb1e ("net: phylink: simplify phy case for ksettings_set method") Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Xin Long says: ==================== tipc: fix the mtu update in link mtu negotiation This patchset fixes a crash caused by a too small MTU carried in the activate msg. Note that as such malicious packet does not exist in the normal env, the fix won't break any application The 1st patch introduces a function to calculate the minimum MTU for the bearer, and the 2nd patch fixes the crash with this helper. While at it, the 3rd patch fixes the udp bearer mtu update by netlink with this helper. ==================== Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
Checking the bearer min mtu with tipc_udp_mtu_bad() only works for IPv4 UDP bearer, and IPv6 UDP bearer has a different value for the min mtu. This patch checks with encap_hlen + TIPC_MIN_BEARER_MTU for min mtu, which works for both IPv4 and IPv6 UDP bearer. Note that tipc_udp_mtu_bad() is still used to check media min mtu in __tipc_nl_media_set(), as m->mtu currently is only used by the IPv4 UDP bearer as its default mtu value. Fixes: 682cd3cf ("tipc: confgiure and apply UDP bearer MTU on running links") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
When doing link mtu negotiation, a malicious peer may send Activate msg with a very small mtu, e.g. 4 in Shuang's testing, without checking for the minimum mtu, l->mtu will be set to 4 in tipc_link_proto_rcv(), then n->links[bearer_id].mtu is set to 4294967228, which is a overflow of '4 - INT_H_SIZE - EMSG_OVERHEAD' in tipc_link_mss(). With tipc_link.mtu = 4, tipc_link_xmit() kept printing the warning: tipc: Too large msg, purging xmit list 1 5 0 40 4! tipc: Too large msg, purging xmit list 1 15 0 60 4! And with tipc_link_entry.mtu 4294967228, a huge skb was allocated in named_distribute(), and when purging it in tipc_link_xmit(), a crash was even caused: general protection fault, probably for non-canonical address 0x2100001011000dd: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Not tainted 6.3.0.neta #19 RIP: 0010:kfree_skb_list_reason+0x7e/0x1f0 Call Trace: <IRQ> skb_release_data+0xf9/0x1d0 kfree_skb_reason+0x40/0x100 tipc_link_xmit+0x57a/0x740 [tipc] tipc_node_xmit+0x16c/0x5c0 [tipc] tipc_named_node_up+0x27f/0x2c0 [tipc] tipc_node_write_unlock+0x149/0x170 [tipc] tipc_rcv+0x608/0x740 [tipc] tipc_udp_recv+0xdc/0x1f0 [tipc] udp_queue_rcv_one_skb+0x33e/0x620 udp_unicast_rcv_skb.isra.72+0x75/0x90 __udp4_lib_rcv+0x56d/0xc20 ip_protocol_deliver_rcu+0x100/0x2d0 This patch fixes it by checking the new mtu against tipc_bearer_min_mtu(), and not updating mtu if it is too small. Fixes: ed193ece ("tipc: simplify link mtu negotiation") Reported-by: Shuang Li <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
As different media may requires different min mtu, and even the same media with different net family requires different min mtu, add tipc_bearer_min_mtu() to calculate min mtu accordingly. This API will be used to check the new mtu when doing the link mtu negotiation in the next patch. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King (Oracle) authored
Commit 87e3bee0 ("net: mdio: i2c: Separate C22 and C45 transactions") separated the non-rollball bus accessors, but left the rollball accessors as is. As rollball accessors are clause 45, this results in the rollball protocol being completely non-functional. Fix this. Fixes: 87e3bee0 ("net: mdio: i2c: Separate C22 and C45 transactions") Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Feng Liu authored
When initializing XDP in virtnet_open(), some rq xdp initialization may hit an error causing net device open failed. However, previous rqs have already initialized XDP and enabled NAPI, which is not the expected behavior. Need to roll back the previous rq initialization to avoid leaks in error unwinding of init code. Also extract helper functions of disable and enable queue pairs. Use newly introduced disable helper function in error unwinding and virtnet_close. Use enable helper function in virtnet_open. Fixes: 754b8a21 ("virtio_net: setup xdp_rxq_info") Signed-off-by: Feng Liu <feliu@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: William Tu <witu@nvidia.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shenwei Wang authored
In the implementation, the sent_frame count does not increment when transmit errors occur. Therefore, bq_xmit_all() will take care of returning the XDP frames. Fixes: 26312c68 ("net: fec: correct the counting of XDP sent frames") Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dong Chenchen authored
As the call trace shows, skb_panic was caused by wrong skb->mac_header in nsh_gso_segment(): invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 3 PID: 2737 Comm: syz Not tainted 6.3.0-next-20230505 #1 RIP: 0010:skb_panic+0xda/0xe0 call Trace: skb_push+0x91/0xa0 nsh_gso_segment+0x4f3/0x570 skb_mac_gso_segment+0x19e/0x270 __skb_gso_segment+0x1e8/0x3c0 validate_xmit_skb+0x452/0x890 validate_xmit_skb_list+0x99/0xd0 sch_direct_xmit+0x294/0x7c0 __dev_queue_xmit+0x16f0/0x1d70 packet_xmit+0x185/0x210 packet_snd+0xc15/0x1170 packet_sendmsg+0x7b/0xa0 sock_sendmsg+0x14f/0x160 The root cause is: nsh_gso_segment() use skb->network_header - nhoff to reset mac_header in skb_gso_error_unwind() if inner-layer protocol gso fails. However, skb->network_header may be reset by inner-layer protocol gso function e.g. mpls_gso_segment. skb->mac_header reset by the inaccurate network_header will be larger than skb headroom. nsh_gso_segment nhoff = skb->network_header - skb->mac_header; __skb_pull(skb,nsh_len) skb_mac_gso_segment mpls_gso_segment skb_reset_network_header(skb);//skb->network_header+=nsh_len return -EINVAL; skb_gso_error_unwind skb_push(skb, nsh_len); skb->mac_header = skb->network_header - nhoff; // skb->mac_header > skb->headroom, cause skb_push panic Use correct mac_offset to restore mac_header and get rid of nhoff. Fixes: c411ed85 ("nsh: add GSO support") Reported-by: syzbot+632b5d9964208bfef8c0@syzkaller.appspotmail.com Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 13 May, 2023 5 commits
-
-
David S. Miller authored
Hao Lan says: ==================== net: hns3: fix some bug for hns3 There are some bugfixes for the HNS3 ethernet driver. patch#1 fix miss checking for rx packet. patch#2 fixes VF promisc mode not update when mac table full bug, and patch#3 fixes a nterrupts not initialization in VF FLR bug. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jijie Shao authored
The timeout of the cmdq reset command has been increased to resolve the reset timeout issue in the full VF scenario. The timeout of other cmdq commands remains unchanged. Fixes: 8d307f8e ("net: hns3: create new set of unified hclge_comm_cmd_send APIs") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jie Wang authored
Currently the hns3 vf function reset delays 5000ms before vf rebuild process. In product applications, this delay is too long for application configurations and causes configuration timeout. According to the tests, 500ms delay is enough for reset process except PF FLR. So this patch modifies delay to 500ms in these scenarios. Fixes: 6988eb2a ("net: hns3: Add support to reset the enet/ring mgmt layer") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jijie Shao authored
To prevent the system from abnormally sending PFC frames after an abnormal reset. The hns3 driver notifies the firmware to disable pfc before reset. Fixes: 35d93a30 ("net: hns3: adjust the process of PF reset") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jie Wang authored
In function hns3_dump_tx_queue_info, The print buffer is not enough when the tx BD number is configured to 32760. As a result several BD information wouldn't be displayed. So fix it by increasing the tx queue print buffer length. Fixes: 630a6738 ("net: hns3: adjust string spaces of some parameters of tx bd info in debugfs") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-