- 22 Oct, 2015 37 commits
-
-
Andy Shevchenko authored
commit 6bea0f6d upstream. In case we have less than maximum allowed channels (8) and autoconfiguration is enabled the DWC_PARAMS read is wrong because it uses different arithmetic to what is needed for channel priority setup. Re-do the caclulations properly. This now works on AVR32 board well. Fixes: fed2574b (dw_dmac: introduce software emulation of LLP transfers) Cc: yitian.bu@tangramtek.com Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jeff Moyer authored
commit f0b2e563 upstream. The dax code doesn't currently support misaligned partitions, so disable O_DIRECT via dax until such time as that support materializes. Suggested-by:
Boaz Harrosh <boaz@plexistor.com> Signed-off-by:
Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Felipe F. Tonello authored
commit 0af82211 upstream. This fixes a duplicated pin control causing this error: imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_GPIO_1 already requested by regulators:regulator@2; cannot claim for 2184000.usb imx6q-pinctrl 20e0000.iomuxc: pin-137 (2184000.usb) status -22 imx6q-pinctrl 20e0000.iomuxc: could not request pin 137 (MX6Q_PAD_GPIO_1) from group usbotggrp on device 20e0000.iomuxc imx_usb 2184000.usb: Error applying setting, reverse things back imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_EIM_D31 already requested by regulators:regulator@1; cannot claim for 2184200.usb imx6q-pinctrl 20e0000.iomuxc: pin-52 (2184200.usb) status -22 imx6q-pinctrl 20e0000.iomuxc: could not request pin 52 (MX6Q_PAD_EIM_D31) from group usbh1grp on device 20e0000.iomuxc imx_usb 2184200.usb: Error applying setting, reverse things back Signed-off-by:
Felipe F. Tonello <eu@felipetonello.com> Fixes: e2047e33 ("ARM: dts: add initial Rex Pro board support") Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Chanho Park authored
commit 833b5794 upstream. The cpu booting of exynos5422 has been still broken since we discussed it in last year[1]. This patch is inspired from Odroid XU3 code (Actually, it was from samsung exynos vendor kernel)[2]. This weird reset code was founded exynos5420 octa cores series SoCs and only required for the first boot core is the Little core (Cortex A7). Some of the exynos5420 boards and all of the exynos5422 boards will require this code. There is two ways to check the little core is the first cpu. One is checking GPG2CON[1] GPIO value and the other is checking the cluster number of the first cpu. I selected the latter because it's more easier than the former. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2015-June/350632.html [2] https://patchwork.kernel.org/patch/6782891/ Cc: Kevin Hilman <khilman@kernel.org> Cc: Javier Martinez Canillas <javier@osg.samsung.com> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by:
Kevin Hilman <khilman@linaro.org> Signed-off-by:
Chanho Park <parkch98@gmail.com> [k.kozlowski: Adding stable for v4.1+, reformat comment] Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
Carl Frederik Werner authored
commit 3a2fa775 upstream. Let's fix pinmux address of gpio 170 used by tfp410 powerdown-gpio. According to the OMAP35x Technical Reference Manual CONTROL_PADCONF_I2C3_SDA[15:0] 0x480021C4 mode0: i2c3_sda CONTROL_PADCONF_I2C3_SDA[31:16] 0x480021C4 mode4: gpio_170 the pinmux address of gpio 170 must be 0x480021C6. The former wrong address broke i2c3 (used by hdmi ddc), resulting in kernel message: omap_i2c 48060000.i2c: controller timed out Fixes: 8cecf52b ("ARM: omap3-beagle.dts: add display information") Signed-off-by:
Carl Frederik Werner <frederik@cfbw.eu> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Grazvydas Ignotas authored
commit 1dbdad75 upstream. The i2c5 pinctrl offsets are wrong. If the bootloader doesn't set the pins up, communication with tca6424a doesn't work (controller timeouts) and it is not possible to enable HDMI. Fixes: 9be495c4 ("ARM: dts: omap5-evm: Add I2c pinctrl data") Signed-off-by:
Grazvydas Ignotas <notasas@gmail.com> Signed-off-by:
-
Doug Anderson authored
commit 7ae85dc7 upstream. In (23a4e405 arm: kgdb: Handle read-only text / modules) we moved to using patch_text() to set breakpoints so that we could handle the case when we had CONFIG_DEBUG_RODATA. That patch used patch_text(). Unfortunately, patch_text() assumes that we're not in atomic context when it runs since it needs to grab a mutex and also wait for other CPUs to stop (which it does with a completion). This would result in a stack crawl if you had CONFIG_DEBUG_ATOMIC_SLEEP and tried to set a breakpoint in kgdb. The crawl looked something like: BUG: scheduling while atomic: swapper/0/0/0x00010007 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.2.0-rc7-00133-geb63b34b #1073 Hardware name: Rockchip (Device Tree) (unwind_backtrace) from [<c00133d4>] (show_stack+0x20/0x24) (show_stack) from [<c05400e8>] (dump_stack+0x84/0xb8) (dump_stack) from [<c004913c>] (__schedule_bug+0x54/0x6c) (__schedule_bug) from [<c054065c>] (__schedule+0x80/0x668) (__schedule) from [<c0540cfc>] (schedule+0xb8/0xd4) (schedule) from [<c0543a3c>] (schedule_timeout+0x2c/0x234) (schedule_timeout) from [<c05417c0>] (wait_for_common+0xf4/0x188) (wait_for_common) from [<c0541874>] (wait_for_completion+0x20/0x24) (wait_for_completion) from [<c00a0104>] (__stop_cpus+0x58/0x70) (__stop_cpus) from [<c00a0580>] (stop_cpus+0x3c/0x54) (stop_cpus) from [<c00a06c4>] (__stop_machine+0xcc/0xe8) (__stop_machine) from [<c00a0714>] (stop_machine+0x34/0x44) (stop_machine) from [<c00173e8>] (patch_text+0x28/0x34) (patch_text) from [<c001733c>] (kgdb_arch_set_breakpoint+0x40/0x4c) (kgdb_arch_set_breakpoint) from [<c00a0d68>] (kgdb_validate_break_address+0x2c/0x60) (kgdb_validate_break_address) from [<c00a0e90>] (dbg_set_sw_break+0x1c/0xdc) (dbg_set_sw_break) from [<c00a2e88>] (gdb_serial_stub+0x9c4/0xba4) (gdb_serial_stub) from [<c00a11cc>] (kgdb_cpu_enter+0x1f8/0x60c) (kgdb_cpu_enter) from [<c00a18cc>] (kgdb_handle_exception+0x19c/0x1d0) (kgdb_handle_exception) from [<c0016f7c>] (kgdb_compiled_brk_fn+0x30/0x3c) (kgdb_compiled_brk_fn) from [<c00091a4>] (do_undefinstr+0x1a4/0x20c) (do_undefinstr) from [<c001400c>] (__und_svc_finish+0x0/0x34) It turns out that when we're in kgdb all the CPUs are stopped anyway so there's no reason we should be calling patch_text(). We can instead directly call __patch_text() which assumes that CPUs have already been stopped. Fixes: 23a4e405 ("arm: kgdb: Handle read-only text / modules") Reported-by:
Aapo Vienamo <avienamo@nvidia.com> Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Stephen Boyd <sboyd@codeaurora.org> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Paul Bolle authored
commit fe2b5921 upstream. wf_unregister_client() increments the client count when a client unregisters. That is obviously incorrect. Decrement that client count instead. Fixes: 75722d39 ("[PATCH] ppc64: Thermal control for SMU based machines") Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Ard Biesheuvel authored
commit a077224f upstream. While working on the 32-bit ARM port of UEFI, I noticed a strange corruption in the kernel log. The following snprintf() statement (in drivers/firmware/efi/efi.c:efi_md_typeattr_format()) snprintf(pos, size, "|%3s|%2s|%2s|%2s|%3s|%2s|%2s|%2s|%2s]", was producing the following output in the log: | | | | | |WB|WT|WC|UC] | | | | | |WB|WT|WC|UC] | | | | | |WB|WT|WC|UC] |RUN| | | | |WB|WT|WC|UC]* |RUN| | | | |WB|WT|WC|UC]* | | | | | |WB|WT|WC|UC] |RUN| | | | |WB|WT|WC|UC]* | | | | | |WB|WT|WC|UC] |RUN| | | | | | | |UC] |RUN| | | | | | | |UC] As it turns out, this is caused by incorrect code being emitted for the string() function in lib/vsprintf.c. The following code if (!(spec.flags & LEFT)) { while (len < spec.field_width--) { if (buf < end) *buf = ' '; ++buf; } } for (i = 0; i < len; ++i) { if (buf < end) *buf = *s; ++buf; ++s; } while (len < spec.field_width--) { if (buf < end) *buf = ' '; ++buf; } when called with len == 0, triggers an issue in the GCC SRA optimization pass (Scalar Replacement of Aggregates), which handles promotion of signed struct members incorrectly. This is a known but as yet unresolved issue. (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=65932). In this particular case, it is causing the second while loop to be executed erroneously a single time, causing the additional space characters to be printed. So disable the optimization by passing -fno-ipa-sra. Acked-by:
Nicolas Pitre <nico@linaro.org> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
Russell King authored
commit 9b55613f upstream. When a kernel is built covering ARMv6 to ARMv7, we omit to clear the IT state when entering a signal handler. This can cause the first few instructions to be conditionally executed depending on the parent context. In any case, the original test for >= ARMv7 is broken - ARMv6 can have Thumb-2 support as well, and an ARMv6T2 specific build would omit this code too. Relax the test back to ARMv6 or greater. This results in us always clearing the IT state bits in the PSR, even on CPUs where these bits are reserved. However, they're reserved for the IT state, so this should cause no harm. Fixes: d71e1352 ("Clear the IT state when invoking a Thumb-2 signal handler") Acked-by:
H. Nikolaus Schaller <hns@goldelico.com> Tested-by:
-
Guenter Roeck authored
commit 728d2940 upstream. The STEP_UP_TIME and STEP_DOWN_TIME registers are swapped for all chips but NCT6775. Reported-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Dominik Dingel authored
commit 00cc1633 upstream. Commit 2ee507c4 ("sched: Add function single_task_running to let a task check if it is the only task running on a cpu") referenced the current runqueue with the smp_processor_id. When CONFIG_DEBUG_PREEMPT is enabled, that is only allowed if preemption is disabled or the currrent task is bound to the local cpu (e.g. kernel worker). With commit f7819512 ("kvm: add halt_poll_ns module parameter") KVM calls single_task_running. If CONFIG_DEBUG_PREEMPT is enabled that generates a lot of kernel messages. To avoid adding preemption in that cases, as it would limit the usefulness, we change single_task_running to access directly the cpu local runqueue. Cc: Tim Chen <tim.c.chen@linux.intel.com> Suggested-by:
Peter Zijlstra <peterz@infradead.org> Acked-by:
Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Francesco Lavra authored
commit 0919e444 upstream. Commit f2147de3 ("watchdog: sunxi: support parameterized compatible strings") introduced a regression in sunxi_wdt_start(), by which the system reset function of the watchdog is not enabled upon starting the watchdog. As a result, the system is not reset when the watchdog expires. Fix it. Fixes: f2147de3 ("watchdog: sunxi: support parameterized compatible strings") Signed-off-by:
Francesco Lavra <francescolavra.fl@gmail.com> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by:
Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
Peter Zijlstra authored
commit 57ffc5ca upstream. Its currently possible to drop the last refcount to the aux buffer from NMI context, which results in the expected fireworks. The refcounting needs a bigger overhaul, but to cure the immediate problem, delay the freeing by using an irq_work. Reviewed-and-tested-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Reported-by:
Vince Weaver <vincent.weaver@maine.edu> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
commit caa47047 upstream. The original patch introducing this header wrote the number of CPUs available and online in one order and then swapped those values when reading, fix it. Before: # perf record usleep 1 # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 4 # nrcpus avail : 4 # echo 0 > /sys/devices/system/cpu/cpu2/online # perf record usleep 1 # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 4 # nrcpus avail : 3 # echo 0 > /sys/devices/system/cpu/cpu1/online # perf record usleep 1 # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 4 # nrcpus avail : 2 After the fix, bringing back the CPUs online: # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 2 # nrcpus avail : 4 # echo 1 > /sys/devices/system/cpu/cpu2/online # perf record usleep 1 # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 3 # nrcpus avail : 4 # echo 1 > /sys/devices/system/cpu/cpu1/online # perf record usleep 1 # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 4 # nrcpus avail : 4 Acked-by:
Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Fixes: fbe96f29 ("perf tools: Make perf.data more self-descriptive (v8)") Link: http://lkml.kernel.org/r/20150911153323.GP23511@kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Ben Hutchings authored
commit 93df8a1e upstream. perf currently fails to build on MIPS as there is no tools/perf/arch/mips/Build file. Adding an empty file fixes this as there are no MIPS-specific sources to build. It looks like the same is needed for Alpha and PA-RISC, though I haven't been able to test those. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Fixes: 5e8c0fb6 ("perf build: Add arch x86 objects building") Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1438704627.7315.2.camel@decadent.org.ukSigned-off-by:
-
Kan Liang authored
commit 601083cf upstream. print_aggr() fails to print per-core/per-socket statistics after commit 582ec082 ("perf stat: Fix per-socket output bug for uncore events") if events have differnt cpus. Because in print_aggr(), aggr_get_id needs index (not cpu id) to find core/pkg id. Also, evsel cpu maps should be used to get aggregated id. Here is an example: Counting events cycles,uncore_imc_0/cas_count_read/. (Uncore event has cpumask 0,18) $ perf stat -e cycles,uncore_imc_0/cas_count_read/ -C0,18 --per-core sleep 2 Without this patch, it failes to get CPU 18 result. Performance counter stats for 'CPU(s) 0,18': S0-C0 1 7526851 cycles S0-C0 1 1.05 MiB uncore_imc_0/cas_count_read/ S1-C0 0 <not counted> cycles S1-C0 0 <not counted> MiB uncore_imc_0/cas_count_read/ With this patch, it can get both CPU0 and CPU18 result. Performance counter stats for 'CPU(s) 0,18': S0-C0 1 6327768 cycles S0-C0 1 0.47 MiB uncore_imc_0/cas_count_read/ S1-C0 1 330228 cycles S1-C0 1 0.29 MiB uncore_imc_0/cas_count_read/ Signed-off-by:
Kan Liang <kan.liang@intel.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Acked-by:
Stephane Eranian <eranian@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Fixes: 582ec082 ("perf stat: Fix per-socket output bug for uncore events") Link: http://lkml.kernel.org/r/1435820925-51091-1-git-send-email-kan.liang@intel.comSigned-off-by:
-
Arnaldo Carvalho de Melo authored
commit e8e6d37e upstream. When we introduce a new sort key, we need to update the hists__calc_col_len() function accordingly, otherwise the width will be limited to strlen(header). We can't update it when obtaining a line value for a column (for instance, in sort__srcline_cmp()), because we reset it all when doing a resort (see hists__output_recalc_col_len()), so we need to, from what is in the hist_entry fields, set each of the column widths. Cc: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Fixes: 409a8be6 ("perf tools: Add sort by src line/number") Link: http://lkml.kernel.org/n/tip-jgbe0yx8v1gs89cslr93pvz2@git.kernel.orgSigned-off-by:
-
Adrian Hunter authored
commit b5cabbcb upstream. A copy of /proc/kcore containing the kernel text can be made to the buildid cache. e.g. perf buildid-cache -v -k /proc/kcore To workaround objdump limitations, a copy is also made when annotating against /proc/kcore. The copying process stops working from libelf about v1.62 onwards (the problem was found with v1.63). The cause is that a call to gelf_getphdr() in kcore__add_phdr() fails because additional validation has been added to gelf_getphdr(). The use of gelf_getphdr() is a misguided attempt to get default initialization of the Gelf_Phdr structure. That should not be necessary because every member of the Gelf_Phdr structure is subsequently assigned. So just remove the call to gelf_getphdr(). Similarly, a call to gelf_getehdr() in gelf_kcore__init() can be removed also. Committer notes: Note to stable@kernel.org, from Adrian in the cover letter for this patchkit: The "Fix copying of /proc/kcore" problem goes back to v3.13 if you think it is important enough for stable. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1443089122-19082-3-git-send-email-adrian.hunter@intel.comSigned-off-by:
-
Peter Zijlstra authored
commit ebfb4988 upstream. Sasha reported that we can get here with .idx==-1, and cpuc->event_constraints unallocated. Suggested-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
Azael Avalos authored
commit 53147b6c upstream. Commit a2b3471b ("toshiba_acpi: Use the Hotkey Event Type function for keymap choosing") changed the *setup_keyboard function to query for the Hotkey Event Type to help choose the correct keymap, but turns out that here are certain Toshiba models out there not implementing this feature, and thus, failing to continue the input device registration and leaving such laptops without hotkey support. This patch changes such check, and instead of returning an error if the Hotkey Event Type is not present, we simply inform userspace about it, changing the message printed from err to notice, making the function responsible for registering the input device to continue. This issue was found on a Toshiba Portege Z30-B, but there might be some other models out there affected by this regression as well. Signed-off-by:
Azael Avalos <coproscefalo@gmail.com> Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
-
Nicholas Bellinger authored
This patch fixes a v4.1 only regression bug as reported by Martin where UNIT_ATTENTION checking for pre v4.2-rc1 RCU conversion code legacy se_node_acl->device_list[] was hitting a NULL pointer dereference in: [ 1858.639654] CPU: 2 PID: 1293 Comm: kworker/2:1 Tainted: G I 4.1.6-fixxcopy+ #1 [ 1858.639699] Hardware name: Dell Inc. PowerEdge R410/0N83VF, BIOS 1.11.0 07/20/2012 [ 1858.639747] Workqueue: xcopy_wq target_xcopy_do_work [target_core_mod] [ 1858.639782] task: ffff880036f0cbe0 ti: ffff880317940000 task.ti: ffff880317940000 [ 1858.639822] RIP: 0010:[<ffffffffa01d3774>] [<ffffffffa01d3774>] target_scsi3_ua_check+0x24/0x60 [target_core_mod] [ 1858.639884] RSP: 0018:ffff880317943ce0 EFLAGS: 00010282 [ 1858.639913] RAX: 0000000000000000 RBX: ffff880317943dc0 RCX: 0000000000000000 [ 1858.639950] RDX: 0000000000000000 RSI: ffff880317943dd0 RDI: ffff88030eaee408 [ 1858.639987] RBP: ffff88030eaee408 R08: 0000000000000001 R09: 0000000000000001 [ 1858.640025] R10: 0000000000000000 R11: 00000000000706e0 R12: ffff880315e0a000 [ 1858.640062] R13: ffff88030eaee408 R14: 0000000000000001 R15: ffff88030eaee408 [ 1858.640100] FS: 0000000000000000(0000) GS:ffff880322e80000(0000) knlGS:0000000000000000 [ 1858.640143] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1858.640173] CR2: 0000000000000000 CR3: 000000000180d000 CR4: 00000000000006e0 [ 1858.640210] Stack: [ 1858.640223] ffffffffa01cadfa ffff88030eaee400 ffff880318e7c340 ffff880315e0a000 [ 1858.640267] ffffffffa01d8c25 ffff8800cae809e0 0000000000000400 0000000000000400 [ 1858.640310] ffff880318e7c3d0 0000000006b75800 0000000000080000 ffff88030eaee400 [ 1858.640354] Call Trace: [ 1858.640379] [<ffffffffa01cadfa>] ? target_setup_cmd_from_cdb+0x13a/0x2c0 [target_core_mod] [ 1858.640429] [<ffffffffa01d8c25>] ? target_xcopy_setup_pt_cmd+0x85/0x320 [target_core_mod] [ 1858.640479] [<ffffffffa01d9424>] ? target_xcopy_do_work+0x264/0x700 [target_core_mod] [ 1858.640526] [<ffffffff810ac3a0>] ? pick_next_task_fair+0x720/0x8f0 [ 1858.640562] [<ffffffff8108b3fb>] ? process_one_work+0x14b/0x430 [ 1858.640595] [<ffffffff8108bf5b>] ? worker_thread+0x6b/0x560 [ 1858.640627] [<ffffffff8108bef0>] ? rescuer_thread+0x390/0x390 [ 1858.640661] [<ffffffff810913b3>] ? kthread+0xd3/0xf0 [ 1858.640689] [<ffffffff810912e0>] ? kthread_create_on_node+0x180/0x180 Also, check for the same se_node_acl->device_list[] during EXTENDED_COPY operation as a non-holding persistent reservation port. Reported-by:
Martin Svec <martin,svec@zoner.cz> Tested-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Jenny Derzhavetz authored
commit 3e03c4b0 upstream. The iscsi target core teardown sequence calls wait_conn for all active commands to finish gracefully by: - move the queue-pair to error state - drain all the completions - wait for the core to finish handling all session commands However, when tearing down a session while there are sequenced commands that are still waiting for unsolicited data outs, we can block forever as these are missing an extra reference put. We basically need the equivalent of iscsit_free_queue_reqs_for_conn() which is called after wait_conn has returned. Address this by an explicit walk on conn_cmd_list and put the extra reference. Signed-off-by:
Jenny Derzhavetz <jennyf@mellanox.com> Signed-off-by:
Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
-
Jenny Derzhavetz authored
commit a4c15cd9 upstream. As documented in iscsit_sequence_cmd: /* * Existing callers for iscsit_sequence_cmd() will silently * ignore commands with CMDSN_LOWER_THAN_EXP, so force this * return for CMDSN_MAXCMDSN_OVERRUN as well.. */ We need to silently finish a command when it's in ISTATE_REMOVE. This fixes an teardown hang we were seeing where a mis-behaved initiator (triggered by allocation error injections) sent us a cmdsn which was lower than expected. Signed-off-by:
-
Nicholas Bellinger authored
commit 4416f89b upstream. This patch is a >= v4.1 regression bug-fix where control CDB emulation logic in commit 38b57f82 now expects a se_cmd->se_sess pointer to exist when determining T10-PI support is to be exposed for initiator host ports. To address this bug, go ahead and add locally generated se_cmd descriptors for copy-offload block-copy to it's own stand-alone se_session nexus, while the parent EXTENDED_COPY se_cmd descriptor remains associated with it's originating se_cmd->se_sess nexus. Note a valid se_cmd->se_sess is also required for future support of WRITE_INSERT and READ_STRIP software emulation when submitting backend I/O to se_device that exposes T10-PI suport. Reported-by:
Alex Gorbachev <ag@iss-integration.com> Tested-by:
-
Michal Hocko authored
commit 537b604c upstream. b9d5c6b7 ("[SCSI] cleanup setting task state in scsi_error_handler()") has introduced a race between scsi_error_handler and scsi_host_dev_release resulting in the hang when the device goes away because scsi_error_handler might miss a wake up: CPU0 CPU1 scsi_error_handler scsi_host_dev_release kthread_stop() kthread_should_stop() test_bit(KTHREAD_SHOULD_STOP) set_bit(KTHREAD_SHOULD_STOP) wake_up_process() wait_for_completion() set_current_state(TASK_INTERRUPTIBLE) schedule() The most straightforward solution seems to be to invert the ordering of the set_current_state and kthread_should_stop. The issue has been noticed during reboot test on a 3.0 based kernel but the current code seems to be affected in the same way. [jejb: additional comment added] Reported-and-debugged-by:
Mike Mayer <Mike.Meyer@teradata.com> Signed-off-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
-
Andy Grover authored
commit 76c28f1f upstream. Revert commit 1997e625, which causes double brackets on ipv6 inaddr_any addresses. Since we have np_sockaddr, if we need a textual representation we can use "%pISc". Change iscsit_add_network_portal() and iscsit_add_np() signatures to remove *ip_str parameter. Fix and extend some comments earlier in the function. Tested to work for :: and ::1 via iscsiadm, previously :: failed, see https://bugzilla.redhat.com/show_bug.cgi?id=1249107 . Signed-off-by:
Andy Grover <agrover@redhat.com> Signed-off-by:
-
John Stultz authored
commit 2619d7e9 upstream. The internal clocksteering done for fine-grained error correction uses a logarithmic approximation, so any time adjtimex() adjusts the clock steering, timekeeping_freqadjust() quickly approximates the correct clock frequency over a series of ticks. Unfortunately, the logic in timekeeping_freqadjust(), introduced in commit: dc491596 ("timekeeping: Rework frequency adjustments to work better w/ nohz") used the abs() function with a s64 error value to calculate the size of the approximated adjustment to be made. Per include/linux/kernel.h: "abs() should not be used for 64-bit types (s64, u64, long long) - use abs64()". Thus on 32-bit platforms, this resulted in the clocksteering to take a quite dampended random walk trying to converge on the proper frequency, which caused the adjustments to be made much slower then intended (most easily observed when large adjustments are made). This patch fixes the issue by using abs64() instead. Reported-by:
Nuno Gonçalves <nunojpg@gmail.com> Tested-by:
John Stultz <john.stultz@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1441840051-20244-1-git-send-email-john.stultz@linaro.orgSigned-off-by:
-
Gautham R. Shenoy authored
commit 7e022e71 upstream. In guest_exit_cont we call kvmhv_commence_exit which expects the trap number as the argument. However r3 doesn't contain the trap number at this point and as a result we would be calling the function with a spurious trap number. Fix this by copying r12 into r3 before calling kvmhv_commence_exit as r12 contains the trap number. Fixes: eddb60fbSigned-off-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Thomas Huth authored
commit 3eb4ee68 upstream. Access to the kvm->buses (like with the kvm_io_bus_read() and -write() functions) has to be protected via the kvm->srcu lock. The kvmppc_h_logical_ci_load() and -store() functions are missing this lock so far, so let's add it there, too. This fixes the problem that the kernel reports "suspicious RCU usage" when lock debugging is enabled. Fixes: 99342cf8Signed-off-by:
Thomas Huth <thuth@redhat.com> Signed-off-by:
-
Marc Zyngier authored
commit 688bc577 upstream. When running a guest with the architected timer disabled (with QEMU and the kernel_irqchip=off option, for example), it is important to make sure the timer gets turned off. Otherwise, the guest may try to enable it anyway, leading to a screaming HW interrupt. The fix is to unconditionally turn off the virtual timer on guest exit. Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Jason Wang authored
commit eefd6b06 upstream. We register wildcard mmio eventfd on two buses, once for KVM_MMIO_BUS and once on KVM_FAST_MMIO_BUS but with a single iodev instance. This will lead to an issue: kvm_io_bus_destroy() knows nothing about the devices on two buses pointing to a single dev. Which will lead to double free[1] during exit. Fix this by allocating two instances of iodevs then registering one on KVM_MMIO_BUS and another on KVM_FAST_MMIO_BUS. CPU: 1 PID: 2894 Comm: qemu-system-x86 Not tainted 3.19.0-26-generic #28-Ubuntu Hardware name: LENOVO 2356BG6/2356BG6, BIOS G7ET96WW (2.56 ) 09/12/2013 task: ffff88009ae0c4b0 ti: ffff88020e7f0000 task.ti: ffff88020e7f0000 RIP: 0010:[<ffffffffc07e25d8>] [<ffffffffc07e25d8>] ioeventfd_release+0x28/0x60 [kvm] RSP: 0018:ffff88020e7f3bc8 EFLAGS: 00010292 RAX: dead000000200200 RBX: ffff8801ec19c900 RCX: 000000018200016d RDX: ffff8801ec19cf80 RSI: ffffea0008bf1d40 RDI: ffff8801ec19c900 RBP: ffff88020e7f3bd8 R08: 000000002fc75a01 R09: 000000018200016d R10: ffffffffc07df6ae R11: ffff88022fc75a98 R12: ffff88021e7cc000 R13: ffff88021e7cca48 R14: ffff88021e7cca50 R15: ffff8801ec19c880 FS: 00007fc1ee3e6700(0000) GS:ffff88023e240000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8f389d8000 CR3: 000000023dc13000 CR4: 00000000001427e0 Stack: ffff88021e7cc000 0000000000000000 ffff88020e7f3be8 ffffffffc07e2622 ffff88020e7f3c38 ffffffffc07df69a ffff880232524160 ffff88020e792d80 0000000000000000 ffff880219b78c00 0000000000000008 ffff8802321686a8 Call Trace: [<ffffffffc07e2622>] ioeventfd_destructor+0x12/0x20 [kvm] [<ffffffffc07df69a>] kvm_put_kvm+0xca/0x210 [kvm] [<ffffffffc07df818>] kvm_vcpu_release+0x18/0x20 [kvm] [<ffffffff811f69f7>] __fput+0xe7/0x250 [<ffffffff811f6bae>] ____fput+0xe/0x10 [<ffffffff81093f04>] task_work_run+0xd4/0xf0 [<ffffffff81079358>] do_exit+0x368/0xa50 [<ffffffff81082c8f>] ? recalc_sigpending+0x1f/0x60 [<ffffffff81079ad5>] do_group_exit+0x45/0xb0 [<ffffffff81085c71>] get_signal+0x291/0x750 [<ffffffff810144d8>] do_signal+0x28/0xab0 [<ffffffff810f3a3b>] ? do_futex+0xdb/0x5d0 [<ffffffff810b7028>] ? __wake_up_locked_key+0x18/0x20 [<ffffffff810f3fa6>] ? SyS_futex+0x76/0x170 [<ffffffff81014fc9>] do_notify_resume+0x69/0xb0 [<ffffffff817cb9af>] int_signal+0x12/0x17 Code: 5d c3 90 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb 48 83 ec 08 48 8b 7f 20 e8 06 d6 a5 c0 48 8b 43 08 48 8b 13 48 89 df 48 89 42 08 <48> 89 10 48 b8 00 01 10 00 00 RIP [<ffffffffc07e25d8>] ioeventfd_release+0x28/0x60 [kvm] RSP <ffff88020e7f3bc8> Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Reviewed-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
-
Jason Wang authored
commit 85da11ca upstream. This patch factors out core eventfd assign/deassign logic and leaves the argument checking and bus index selection to callers. Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Jason Wang authored
commit 8f4216c7 upstream. Currently, if we had a zero length mmio eventfd assigned on KVM_MMIO_BUS. It will never be found by kvm_io_bus_cmp() since it always compares the kvm_io_range() with the length that guest wrote. This will cause e.g for vhost, kick will be trapped by qemu userspace instead of vhost. Fixing this by using zero length if an iodevice is zero length. Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Jason Wang authored
commit 8453fecb upstream. We only want zero length mmio eventfd to be registered on KVM_FAST_MMIO_BUS. So check this explicitly when arg->len is zero to make sure this. Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Wanpeng Li authored
commit 04bb92e4 upstream. Reference SDM 28.1: The current VPID is 0000H in the following situations: - Outside VMX operation. (This includes operation in system-management mode under the default treatment of SMIs and SMM with VMX operation; see Section 34.14.) - In VMX root operation. - In VMX non-root operation when the “enable VPID” VM-execution control is 0. The VPID should never be 0000H in non-root operation when "enable VPID" VM-execution control is 1. However, commit 34a1cd60 ("kvm: x86: vmx: move some vmx setting from vmx_init() to hardware_setup()") remove the codes which reserve 0000H for VMX root operation. This patch fix it by again reserving 0000H for VMX root operation. Fixes: 34a1cd60Reported-by:
Wincy Van <fanwenyi0529@gmail.com> Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
-
Marek Majtyka authored
commit ca09f02f upstream. A critical bug has been found in device memory stage1 translation for VMs with more then 4GB of address space. Once vm_pgoff size is smaller then pa (which is true for LPAE case, u32 and u64 respectively) some more significant bits of pa may be lost as a shift operation is performed on u32 and later cast onto u64. Example: vm_pgoff(u32)=0x00210030, PAGE_SHIFT=12 expected pa(u64): 0x0000002010030000 produced pa(u64): 0x0000000010030000 The fix is to change the order of operations (casting first onto phys_addr_t and then shifting). Reviewed-by:
Marek Majtyka <marek.majtyka@tieto.com> Signed-off-by:
-
- 03 Oct, 2015 3 commits
-
-
Greg Kroah-Hartman authored
-
Kyle Evans authored
commit 8a1513b4 upstream. Do not write initialize magic on systems that do not have feature query 0xb. Fixes Bug #82451. Redefine FEATURE_QUERY to align with 0xb and FEATURE2 with 0xd for code clearity. Add a new test function, hp_wmi_bios_2008_later() & simplify hp_wmi_bios_2009_later(), which fixes a bug in cases where an improper value is returned. Probably also fixes Bug #69131. Add missing __init tag. Signed-off-by:
Kyle Evans <kvans32@gmail.com> Signed-off-by:
-
Luis Henriques authored
commit 3aaf14da upstream. zcomp_create() verifies the success of zcomp_strm_{multi,single}_create() through comp->stream, which can potentially be pointing to memory that was freed if these functions returned an error. While at it, replace a 'ERR_PTR(-ENOMEM)' by a more generic 'ERR_PTR(error)' as in the future zcomp_strm_{multi,siggle}_create() could return other error codes. Function documentation updated accordingly. Fixes: beca3ec7 ("zram: add multi stream functionality") Signed-off-by:
Luis Henriques <luis.henriques@canonical.com> Acked-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by:
Minchan Kim <minchan@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
