In order to test for the performance of aria-avx implementation, it needs
an async speed test.
So, it adds async speed tests to the tcrypt.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The implementation is based on the 32-bit implementation of the aria.
Also, aria-avx process steps are the similar to the camellia-avx.
1. Byteslice(16way)
2. Add-round-key.
3. Sbox
4. Diffusion layer.

Except for s-box, all steps are the same as the aria-generic
implementation. s-box step is very similar to camellia and
sm4 implementation.

There are 2 implementations for s-box step.
One is to use AES-NI and affine transformation, which is the same as
Camellia, sm4, and others.
Another is to use GFNI.
GFNI implementation is faster than AES-NI implementation.
So, it uses GFNI implementation if the running CPU supports GFNI.

There are 4 s-boxes in the ARIA and the 2 s-boxes are the same as
AES's s-boxes.

To calculate the first sbox, it just uses the aesenclast and then
inverts shift_row.
No more process is needed for this job because the first s-box is
the same as the AES encryption s-box.

To calculate the second sbox(invert of s1), it just uses the aesdeclast
and then inverts shift_row.
No more process is needed for this job because the second s-box is
the same as the AES decryption s-box.

To calculate the third s-box, it uses the aesenclast,
then affine transformation, which is combined AES inverse affine and
ARIA S2.

To calculate the last s-box, it uses the aesdeclast,
then affine transformation, which is combined X2 and AES forward affine.

The optimized third and last s-box logic and GFNI s-box logic are
implemented by Jussi Kivilinna.

The aria-generic implementation is based on a 32-bit implementation,
not an 8-bit implementation. the aria-avx Diffusion Layer implementation
is based on aria-generic implementation because 8-bit implementation is
not fit for parallel implementation but 32-bit is enough to fit for this.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

It renames aria to aria_generic and exports some functions such as
aria_set_key(), aria_encrypt(), and aria_decrypt() to be able to be
used by aria-avx implementation.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Switch to %zu instead of %d for printing size_t.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add missing __init/__exit annotations to init/exit funcs.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Commit 2d16803c ("crypto: blake2s - remove shash module") removes the
config CRYPTO_BLAKE2S.

Commit 3f342a23 ("crypto: Kconfig - simplify hash entries") makes
various changes to the config descriptions as part of some consolidation
and clean-up, but among all those changes, it also accidently adds back
CRYPTO_BLAKE2S after its removal due to the original patch being based on
a state before the CRYPTO_BLAKE2S removal.

See Link for the author's confirmation of this happening accidently.

Fixes: 3f342a23 ("crypto: Kconfig - simplify hash entries")
Link: https://lore.kernel.org/all/MW5PR84MB18424AB8C095BFC041AE33FDAB479@MW5PR84MB1842.NAMPRD84.PROD.OUTLOOK.COM/Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Commit 3f342a23 ("crypto: Kconfig - simplify hash entries") makes
various changes to the config descriptions as part of some consolidation
and clean-up, but among all those changes, it also accidently renames
CRYPTO_SHA1_ARM64_CE to CRYPTO_SHA1_ARM64.

Revert this unintended config name change.

See Link for the author's confirmation of this happening accidently.

Fixes: 3f342a23 ("crypto: Kconfig - simplify hash entries")
Link: https://lore.kernel.org/all/MW5PR84MB18424AB8C095BFC041AE33FDAB479@MW5PR84MB1842.NAMPRD84.PROD.OUTLOOK.COM/Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Commit 363a90c2 ("crypto: safexcel/aes - switch to
library version of key expansion routine") removed
CRYPTO_AES in the config. However, some portions of codes
still rely on generic AES cipher (e.g. refer to
safexcel_aead_gcm_cra_init(), safexcel_xcbcmac_cra_init()).
This causes transform allocation failure for those algos,
if CRYPTO_AES is not manually enabled.

To resolve that, we replace all existing AES cipher
dependent codes with their AES library counterpart.

Fixes: 363a90c2 ("crypto: safexcel/aes - switch to library version of key expansion routine")
Signed-off-by: Peter Harliman Liem <pliem@maxlinear.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

From commit d03c5441 ("dma-mapping: disallow .map_sg
operations from returning zero on error"), dma_map_sg()
produces warning if size is 0. This results in visible
warnings if crypto length is zero.
To avoid that, we avoid calling dma_map_sg if size is zero.
Signed-off-by: Peter Harliman Liem <pliem@maxlinear.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When mapping the input and output parameters, the implementations of RSA
and DH pass to the function dma_map_single() a pointer to the first
member of the structure they want to map instead of a pointer to the
actual structure.
This results in set of warnings reported by the static analyser Smatch:

    drivers/crypto/qat/qat_common/qat_asym_algs.c:335 qat_dh_compute_value() error: dma_map_single_attrs() '&qat_req->in.dh.in.b' too small (8 vs 64)
    drivers/crypto/qat/qat_common/qat_asym_algs.c:341 qat_dh_compute_value() error: dma_map_single_attrs() '&qat_req->out.dh.r' too small (8 vs 64)
    drivers/crypto/qat/qat_common/qat_asym_algs.c:732 qat_rsa_enc() error: dma_map_single_attrs() '&qat_req->in.rsa.enc.m' too small (8 vs 64)
    drivers/crypto/qat/qat_common/qat_asym_algs.c:738 qat_rsa_enc() error: dma_map_single_attrs() '&qat_req->out.rsa.enc.c' too small (8 vs 64)
    drivers/crypto/qat/qat_common/qat_asym_algs.c:878 qat_rsa_dec() error: dma_map_single_attrs() '&qat_req->in.rsa.dec.c' too small (8 vs 64)
    drivers/crypto/qat/qat_common/qat_asym_algs.c:884 qat_rsa_dec() error: dma_map_single_attrs() '&qat_req->out.rsa.dec.m' too small (8 vs 64)

Where the address of the first element of a structure is used as an
input for the function dma_map_single(), replace it with the address of
the structure. This fix does not introduce any functional change as the
addresses are the same.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This reverts commit e48767c1.

In an attempt to resolve a set of warnings reported by the static
analyzer Smatch, the reverted commit improperly reduced the sizes of the
DMA mappings used for the input and output parameters for both RSA and
DH creating a mismatch (map size=8 bytes, unmap size=64 bytes).

This issue is reported when CONFIG_DMA_API_DEBUG is selected, when the
crypto self test is run. The function dma_unmap_single() reports a
warning similar to the one below, saying that the `device driver frees
DMA memory with different size`.

    DMA-API: 4xxx 0000:06:00.0: device driver frees DMA memory with different size [device address=0x0000000123206c80] [map size=8 bytes] [unmap size=64 bytes]
    WARNING: CPU: 0 PID: 0 at kernel/dma/debug.c:973 check_unmap+0x3d0/0x8c0\
    ...
    Call Trace:
    <IRQ>
    debug_dma_unmap_page+0x5c/0x60
    qat_dh_cb+0xd7/0x110 [intel_qat]
    qat_alg_asym_callback+0x1a/0x30 [intel_qat]
    adf_response_handler+0xbd/0x1a0 [intel_qat]
    tasklet_action_common.constprop.0+0xcd/0xe0
    __do_softirq+0xf8/0x30c
    __irq_exit_rcu+0xbf/0x140
    common_interrupt+0xb9/0xd0
    </IRQ>
    <TASK>

The original commit was correct.

Cc: <stable@vger.kernel.org>
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When CONFIG_DMA_API_DEBUG is selected, while running the crypto self
test on the QAT crypto algorithms, the function add_dma_entry() reports
a warning similar to the one below, saying that overlapping mappings
are not supported. This occurs in tests where the input and the output
scatter list point to the same buffers (i.e. two different scatter lists
which point to the same chunks of memory).

The logic that implements the mapping uses the flag DMA_BIDIRECTIONAL
for both the input and the output scatter lists which leads to
overlapped write mappings. These are not supported by the DMA layer.

Fix by specifying the correct DMA transfer directions when mapping
buffers. For in-place operations where the input scatter list
matches the output scatter list, buffers are mapped once with
DMA_BIDIRECTIONAL, otherwise input buffers are mapped using the flag
DMA_TO_DEVICE and output buffers are mapped with DMA_FROM_DEVICE.
Overlapping a read mapping with a write mapping is a valid case in
dma-coherent devices like QAT.
The function that frees and unmaps the buffers, qat_alg_free_bufl()
has been changed accordingly to the changes to the mapping function.

   DMA-API: 4xxx 0000:06:00.0: cacheline tracking EEXIST, overlapping mappings aren't supported
   WARNING: CPU: 53 PID: 4362 at kernel/dma/debug.c:570 add_dma_entry+0x1e9/0x270
   ...
   Call Trace:
   dma_map_page_attrs+0x82/0x2d0
   ? preempt_count_add+0x6a/0xa0
   qat_alg_sgl_to_bufl+0x45b/0x990 [intel_qat]
   qat_alg_aead_dec+0x71/0x250 [intel_qat]
   crypto_aead_decrypt+0x3d/0x70
   test_aead_vec_cfg+0x649/0x810
   ? number+0x310/0x3a0
   ? vsnprintf+0x2a3/0x550
   ? scnprintf+0x42/0x70
   ? valid_sg_divisions.constprop.0+0x86/0xa0
   ? test_aead_vec+0xdf/0x120
   test_aead_vec+0xdf/0x120
   alg_test_aead+0x185/0x400
   alg_test+0x3d8/0x500
   ? crypto_acomp_scomp_free_ctx+0x30/0x30
   ? __schedule+0x32a/0x12a0
   ? ttwu_queue_wakelist+0xbf/0x110
   ? _raw_spin_unlock_irqrestore+0x23/0x40
   ? try_to_wake_up+0x83/0x570
   ? _raw_spin_unlock_irqrestore+0x23/0x40
   ? __set_cpus_allowed_ptr_locked+0xea/0x1b0
   ? crypto_acomp_scomp_free_ctx+0x30/0x30
   cryptomgr_test+0x27/0x50
   kthread+0xe6/0x110
   ? kthread_complete_and_exit+0x20/0x20
   ret_from_fork+0x1f/0x30

Fixes: d370cec3 ("crypto: qat - Intel(R) QAT crypto interface")
Link: https://lore.kernel.org/linux-crypto/20220223080400.139367-1-gilad@benyossef.com/Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The value of qm algorithm can change dynamically according to the
value of the capability register.

Add xxx_set_qm_algs() function to obtain the algs that the
hardware device supported from the capability register and set
them into usr mode attribute files.
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add function 'sec_get_alg_bitmap' to get hardware algorithm bitmap
before register algorithm to crypto, instead of determining
whether to register an algorithm based on hardware platform's version.
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add function 'hisi_zip_alg_support' to get device configuration
information from capability registers, instead of determining whether
to register an algorithm based on hardware platform's version.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use table to store the different ecdh curve configuration,
making the registration of ecdh clearer and expansion more
convenient.
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Read some hpre device configuration info from capability
register, instead of fixed macros.
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Support get device irq information from hardware registers
instead of fixed macros.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Hardware V3 and later versions support get error type from
registers. To be compatible with later hardware versions,
get error type from registers instead of fixed marco.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

To be compatible with accelerator devices of different
versions, 'UACCE_CMD_QM_SET_QP_INFO' ioctl is added to obtain
queue information in userspace, including queue depth and buffer
description size.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Hardware V3 and later versions can obtain qp num and depth supported
by the hardware from registers. To be compatible with later hardware
versions, get qp num and depth from registers instead of fixed marcos.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Before hardware V3, hardwares do not provide the feature registers,
driver resolves hardware differences based on the hardware version.
As a result, the driver does not support the new hardware.

Hardware V3 and later versions support to obtain hardware features,
such as power-gating management and doorbell isolation, through
the hardware registers. To be compatible with later hardware versions,
the features of the current device is obtained by reading the
hardware registers instead of the hardware version.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Some coding style fixes in sec crypto file.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The use of swab() is causing failures in 64-bit arch, as it
translates to __swab64() instead of the intended __swab32().
It eventually causes wrong results in xcbcmac & cmac algo.

Fixes: 78cf1c8b ("crypto: inside-secure - Move ipad/opad into safexcel_context")
Signed-off-by: Peter Harliman Liem <pliem@maxlinear.com>
Acked-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Return the value set_msg_len() directly instead of storing it in another
redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

A warning is shown during shutdown,

__dma_async_device_channel_unregister called while 2 clients hold a reference
WARNING: CPU: 15 PID: 1 at drivers/dma/dmaengine.c:1110 __dma_async_device_channel_unregister+0xb7/0xc0

Call dma_release_channel for occupied channles before dma_async_device_unregister.

Fixes: 54cce8ec ("crypto: ccp - ccp_dmaengine_unregister release dma channels")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Koba Ko <koba.ko@canonical.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Return the value cptvf_send_msg_to_pf_timeout() directly instead of
storing it in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Changes from v1:
  * removed the default implementation from set_pub_key: it is assumed that
    an implementation must always have this callback defined as there are
    no use case for an algorithm, which doesn't need a public key

Many akcipher implementations (like ECDSA) support only signature
verifications, so they don't have all callbacks defined.

Commit 78a0324f ("crypto: akcipher - default implementations for
request callbacks") introduced default callbacks for sign/verify
operations, which just return an error code.

However, these are not enough, because before calling sign the caller would
likely call set_priv_key first on the instantiated transform (as the
in-kernel testmgr does). This function does not have a default stub, so the
kernel crashes, when trying to set a private key on an akcipher, which
doesn't support signature generation.

I've noticed this, when trying to add a KAT vector for ECDSA signature to
the testmgr.

With this patch the testmgr returns an error in dmesg (as it should)
instead of crashing the kernel NULL ptr dereference.

Fixes: 78a0324f ("crypto: akcipher - default implementations for request callbacks")
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In case of error, the function devm_ioremap_resource() returns
ERR_PTR() not NULL. The NULL test in the return value check must be
replaced with IS_ERR().

Fixes: 108713a7 ("crypto: aspeed - Add HACE hash driver")
Signed-off-by: Sun Ke <sunke32@huawei.com>
Reviewed-by: Neal Liu<neal_liu@aspeedtech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch fixes a bunch of bit endianness warnings and two missing
static modifiers.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Neal Liu <neal_liu@aspeedtech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This fixes the following similar build warning when
enabling compile test:

aspeed-hace-hash.c:188:9: warning: format '%x' expects argument of type
'unsigned int', but argument 7 has type 'size_t' {aka 'long unsigned int'}
[-Wformat=]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

If CONFIG_MODULES=y and CONFIG_CRYPTO_DEV_ASPEED=m,
build modpost would be failed.

Error messages:
  ERROR: modpost: "aspeed_register_hace_hash_algs"
  [drivers/crypto/aspeed/aspeed_crypto.ko] undefined!
  ERROR: modpost: "aspeed_unregister_hace_hash_algs"
  [drivers/crypto/aspeed/aspeed_crypto.ko] undefined!

Change build sequence to fix this.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The accelerator drivers supports users to enable VFs through the
module parameter 'vfs_num'. If the number of VFs to be enabled
exceeds the total VFs, all VFs are enabled. Change it to the same
as enabling VF through the 'sriov_numvfs' file. Returns -ERANGE
if the number of VFs to be enabled exceeds total VFs.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In function qm_cmd_write(), if function returns from
branch 'atomic_read(&qm->status.flags) == QM_STOP',
the got dfx access is forgotten to put.

Fixes: 607c191b ("crypto: hisilicon - support runtime PM for accelerator device")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

After the mailbox operation is complete, the result may be unsuccessful.
It needs to check the status bits of the mailbox register,
if it fails, -EIO is returned.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This driver compile tests just fine.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Neal Liu <neal_liu@aspeedtech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The QAT HW supports an hardware mechanism to detect an accelerator hang.
The reporting of a hang occurs after a watchdog timer (WDT) expires.

The value of the WDT set previously was too small and was causing false
positives.
Change the default value of the WDT to 0x7000000ULL to avoid this.

Fixes: 1c4d9d5b ("crypto: qat - enable detection of accelerators hang")
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Set right indentation for test_acomp().
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Delete the redundant word 'in'.
Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Delete the redundant word 'is'.
Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>