- 26 Mar, 2012 36 commits
-
-
Artem Bityutskiy authored
The writebufsize concept was introduce by commit "0e4ca7e5 mtd: add writebufsize field to mtd_info struct" and it represents the maximum amount of data the device writes to the media at a time. This is an important parameter for UBIFS which is used during recovery and which basically defines how big a corruption caused by a power cut can be. Set writebufsize to the flash page size because it is the maximum amount of data it writes at a time. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: stable@kernel.org [2.6.38+] Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
The writebufsize concept was introduce by commit "0e4ca7e5 mtd: add writebufsize field to mtd_info struct" and it represents the maximum amount of data the device writes to the media at a time. This is an important parameter for UBIFS which is used during recovery and which basically defines how big a corruption caused by a power cut can be. Set writebufsize to the flash page size because it is the maximum amount of data it writes at a time. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
The writebufsize concept was introduce by commit "0e4ca7e5 mtd: add writebufsize field to mtd_info struct" and it represents the maximum amount of data the device writes to the media at a time. This is an important parameter for UBIFS which is used during recovery and which basically defines how big a corruption caused by a power cut can be. Set writebufsize to 4 because this drivers writes at max 4 bytes at a time. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: stable@kernel.org [2.6.38+] Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
The writebufsize concept was introduce by commit "0e4ca7e5 mtd: add writebufsize field to mtd_info struct" and it represents the maximum amount of data the device writes to the media at a time. This is an important parameter for UBIFS which is used during recovery and which basically defines how big a corruption caused by a power cut can be. Set it to be equivalent to mtd->writesize because this is the maximum amount of data the driver writes at a time. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Cc: stable@kernel.org [3.2+] Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
The writebufsize concept was introduce by commit "0e4ca7e5 mtd: add writebufsize field to mtd_info struct" and it represents the maximum amount of data the device writes to the media at a time. This is an important parameter for UBIFS which is used during recovery and which basically defines how big a corruption caused by a power cut can be. Set it to be equivalent to mtd->writesize because this is the maximum amount of data the driver writes at a time. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: stable@kernel.org [2.6.38+] Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
The writebufsize concept was introduce by commit "0e4ca7e5 mtd: add writebufsize field to mtd_info struct" and it represents the maximum amount of data the device writes to the media at a time. This is an important parameter for UBIFS which is used during recovery and which basically defines how big a corruption caused by a power cut can be. Set it to be equivalent to mtd->writesize because this is the maximum amount of data the driver writes at a time. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: stable@kernel.org [2.6.38+] Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
The writebufsize concept was introduce by commit "0e4ca7e5 mtd: add writebufsize field to mtd_info struct" and it represents the maximum amount of data the device writes to the media at a time. This is an important parameter for UBIFS which is used during recovery and which basically defines how big a corruption caused by a power cut can be. Set it to be equivalent to mtd->writesize because this is the maximum amount of data the driver writes at a time. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: stable@kernel.org [2.6.38+] Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
The writebufsize concept was introduce by commit "0e4ca7e5 mtd: add writebufsize field to mtd_info struct" and it represents the maximum amount of data the device writes to the media at a time. This is an important parameter for UBIFS which is used during recovery and which basically defines how big a corruption caused by a power cut can be. However, we forgot to set this parameter for block2mtd. Set it to PAGE_SIZE because this is actually the amount of data we write at a time. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Joern Engel <joern@lazybastard.org> Cc: stable@kernel.org [2.6.38+] Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Joe Perches authored
Per call site OOM messages are unnecessary. k.alloc and v.alloc failures use dump_stack(). Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Dan Carpenter authored
Gcc complains here: drivers/mtd/nand/docg4.c: In function ‘probe_docg4’: drivers/mtd/nand/docg4.c:1277:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘resource_size_t’ [-Wformat] drivers/mtd/nand/docg4.c:1277:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 4 has type ‘resource_size_t’ [-Wformat] We have a standard way of printing these using a format string extension. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Wolfram Sang authored
This has been moved from .options to .bbt_options meanwhile. So, it currently checks for something totally different (NAND_OWN_BUFFERS) and decides according to that. Artem Bityutskiy: the options were moved in a40f7341 mtd: nand: consolidate redundant flash-based BBT flags Artem Bityutskiy: CCing -stable Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: stable@kernel.org [3.2+] Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Brian Norris authored
Using UBI on m25p80 can give messages like: UBI error: io_init: bad write buffer size 0 for 1 min. I/O unit We need to initialize writebufsize; I think "page_size" is the correct "bufsize", although I'm not sure. Comments? Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: stable@kernel.org [2.6.38+] Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Brian Norris authored
We don't need to to check for mtd->resume before calling mtd_resume(). mtd_resume() should take care of that. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Masanari Iida authored
Correct spelling "scaning" to scanning" in fs/jffs2/scan.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
This patch renames all MTD functions by adding a "_" prefix: mtd->erase -> mtd->_erase mtd->read_oob -> mtd->_read_oob ... The reason is that we are re-working the MTD API and from now on it is an error to use MTD function pointers directly - we have a corresponding API call for every pointer. By adding a leading "_" we achieve the following: 1. Make sure we convert every direct pointer users 2. A leading "_" suggests that this interface is internal and it becomes less likely that people will use them directly 3. Make sure all the out-of-tree modules stop compiling and the owners spot the big API change and amend them. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Brian Norris authored
There were a few instances of the old MTD interface remaining for JFFS2. We fix one error that shows up (only when CONFIG_JFFS2_FS_WRITEBUFFER is not defined) like this: fs/jffs2/read.c: In function 'jffs2_read_dnode': fs/jffs2/read.c:36:8: error: 'struct mtd_info' has no member named 'read' fs/jffs2/read.c:112:8: error: 'struct mtd_info' has no member named 'read' ... We also simply remove two macros that are not in use, were not updated to the new MTD interface, and don't even utilize the old interface properly. (That means they weren't used since commit 8593fbc6, year 2006; almost 6 years ago, for those who don't want to do the math) Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
We have changed the MTD API and now ROMFS should use 'mtd_read()' instead of mtd->read(). Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
Commit 10934478 did not remove now useless "if (mtd->point)" check mistakingly - let's kill it now. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Mike Dunn authored
This patch adds a driver for the M-Sys / Sandisk diskonchip G4 nand flash found in various smartphones and PDAs, among them the Palm Treo680, HTC Prophet and Wizard, Toshiba Portege G900, Asus P526, and O2 XDA Zinc. It was tested on the Treo 680, but should work generically. Since v3, this patch adds power management functions, a scan of the factory bad block table during initialization, several fixes, and more extensive testing. Also, the platform data header file, which only contained partitioning information, was removed. Command-line partitioning can be used, at least until an mtd parser is written for the saftl format with which these chips are shipped. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Stefan Roese authored
Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Axel Lin authored
This patch converts the drivers in drivers/mtd/* to use the module_spi_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Brian Norris authored
As nand_default_block_markbad() is becoming more complex, it helps to have code appear only in its relevant codepath(s). Here, the calculation of `ofs' based on NAND_BBT_SCANLASTPAGE is only useful on paths where we write bad block markers to OOB. We move the condition/calculation closer to the `write' operation and update the comment to more correctly describe the operation. The variable `wr_ofs' is also used to help isolate our calculation of the "write" offset from the usage of `ofs' to represent the eraseblock offset. This will become useful when we reorder operations in the next patch. This patch should make no functional change. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Brian Norris authored
The mtdoops usage instructions found in Kconfig have been incorrect since: commit 2e386e4b mtd: mtdoops: refactor as a kmsg_dumper mtdoops no longer uses a console. Now, if you build it into your kernel, you add something like the following to your command line to select partition X as your logging partition: mtdoops.mtddev=X Anyway, it seems better to leave the documentation out of Kconfig. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Russell King - ARM Linux authored
/* * This is here for documentation purposes only - until these people * submit their machine types. It will be gone January 2005. */ It's now seven years after that date, so let's remove this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Russell King - ARM Linux authored
Commit c4a9f88d ([MTD] [NOR] fix ctrl-alt-del can't reboot for intel flash bug) interferes with this work-around, causing MTD to issue this warning: Flash device refused suspend due to active operation (state 0) The commit makes our work-around in the map driver unnecessary, so let's remove it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Shiraz Hashim authored
Driver must cleanup all held resources during remove. It wasn't releasing requested memory region. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Shiraz Hashim authored
SPEAr platforms (spear3xx/spear6xx/spear13xx) provide SMI (Serial Memory Interface) controller to access serial NOR flash. SMI provides a simple interface for SPI/serial NOR flashes and has certain inbuilt commands and features to support these flashes easily. It also makes it possible to map an address range in order to directly access (read/write) the SNOR over address bus. This patch intends to provide serial nor driver support for spear platforms which are accessed through SMI. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Brian Norris authored
The description for badblockbits is incorrect. I think someone just made up a false description on the spot to satisfy some kerneldoc warning. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Brian Norris authored
It seems that we have developed a bad-block-marking "feature" out of pure laziness: "We write two bytes per location, so we dont have to mess with 16 bit access." It's relatively simple to write a 1 byte at a time on x8 devices and 2 bytes at a time on x16 devices, so let's do it. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Brian Norris authored
nand_block_bad() doesn't check the correct pages when NAND_BBT_SCAN2NDPAGE is enabled. It should scan both the OOB region of both the 1st and 2nd page of each block. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Brian Norris authored
Many NAND flash systems (especially those with MLC NAND) cannot be reliably written twice in a row. For instance, when marking a bad block, the block may already have data written to it, and so we should attempt to erase the block before writing a bad block marker to its OOB region. We can ignore erase failures, since the block may be bad such that it cannot be erased properly; we still attempt to write zeros to its spare area. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Julia Lawall authored
Add missing iounmap in error handling code, in a case where the function already preforms iounmap on some other execution path. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e; statement S,S1; int ret; @@ e = \(ioremap\|ioremap_nocache\)(...) ... when != iounmap(e) if (<+...e...+>) S ... when any when != iounmap(e) *if (...) { ... when != iounmap(e) return ...; } ... when any iounmap(e); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Fabio Estevam authored
Fix the following build warning: drivers/mtd/mtdcore.c: In function ‘mtd_release’: drivers/mtd/mtdcore.c:110: warning: unused variable ‘mtd’ This happens when neither CONFIG_MTD_CHAR nor CONFIG_MTD_CHAR_MODULE are defined. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Alexander Stein authored
Because it is useless to call it if the device is opened in R/O mode, and also harmful: on CFI NOR flash it may block for long time waiting for erase operations to complete is another partition with a R/W file-system on this chip. Artem Bityutskiy: write commit message, amend the patch to match the latest tree (we use mtd_sync(), not mtd->sync() nowadays). Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Xi Wang authored
Since "length" is a u32, the error handling below didn't work when fixup_pmc551() returns -ENODEV. if ((length = fixup_pmc551(PCI_Device)) <= 0) This patch changes both the type of "length" and the return type of fixup_pmc551() to int. Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Ira W. Snyder authored
This allows the mtdoops driver to work on flash chips using the AMD/Fujitsu compatible command set. As the code comments note, the locks used throughout the normal code paths in the driver are ignored, so that the chance of writing out the kernel's last messages are maximized. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
- 04 Mar, 2012 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds authored
SCSI fixes from James Bottomley: "There's just a single fix in here: the osd max device number fix." * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] osd_uld: Bump MAX_OSD_DEVICES from 64 to 1,048,576
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6Linus Torvalds authored
PARISC fixes from James Bottomley: "This is a set of build fixes to get the cross compiled architecture testbeds building again" * tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6: [PARISC] don't unconditionally override CROSS_COMPILE for 64 bit. [PARISC] include <linux/prefetch.h> in drivers/parisc/iommu-helpers.h [PARISC] fix compile break caused by iomap: make IOPORT/PCI mapping functions conditional
-
- 03 Mar, 2012 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/kvm: Fix Host-Only/Guest-Only counting with SVM disabled
-