- 14 Apr, 2019 1 commit
-
-
Eric Dumazet authored
fib_compute_spec_dst() needs to be called under rcu protection. syzbot reported : WARNING: suspicious RCU usage 5.1.0-rc4+ #165 Not tainted include/linux/inetdevice.h:220 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by swapper/0/0: #0: 0000000051b67925 ((&n->timer)){+.-.}, at: lockdep_copy_map include/linux/lockdep.h:170 [inline] #0: 0000000051b67925 ((&n->timer)){+.-.}, at: call_timer_fn+0xda/0x720 kernel/time/timer.c:1315 stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.1.0-rc4+ #165 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 lockdep_rcu_suspicious+0x153/0x15d kernel/locking/lockdep.c:5162 __in_dev_get_rcu include/linux/inetdevice.h:220 [inline] fib_compute_spec_dst+0xbbd/0x1030 net/ipv4/fib_frontend.c:294 spec_dst_fill net/ipv4/ip_options.c:245 [inline] __ip_options_compile+0x15a7/0x1a10 net/ipv4/ip_options.c:343 ipv4_link_failure+0x172/0x400 net/ipv4/route.c:1195 dst_link_failure include/net/dst.h:427 [inline] arp_error_report+0xd1/0x1c0 net/ipv4/arp.c:297 neigh_invalidate+0x24b/0x570 net/core/neighbour.c:995 neigh_timer_handler+0xc35/0xf30 net/core/neighbour.c:1081 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325 expire_timers kernel/time/timer.c:1362 [inline] __run_timers kernel/time/timer.c:1681 [inline] __run_timers kernel/time/timer.c:1649 [inline] run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694 __do_softirq+0x266/0x95a kernel/softirq.c:293 invoke_softirq kernel/softirq.c:374 [inline] irq_exit+0x180/0x1d0 kernel/softirq.c:414 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0x14a/0x570 arch/x86/kernel/apic/apic.c:1062 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807 Fixes: ed0de45a ("ipv4: recompile ip options in ipv4_link_failure") Signed-off-by:Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Cc: Stephen Suryaputra <ssuryaextr@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 13 Apr, 2019 1 commit
-
-
Stephen Suryaputra authored
Recompile IP options since IPCB may not be valid anymore when ipv4_link_failure is called from arp_error_report. Refer to the commit 3da1ed7a ("net: avoid use IPCB in cipso_v4_error") and the commit before that (9ef6b42a) for a similar issue. Signed-off-by:
Stephen Suryaputra <ssuryaextr@gmail.com> Signed-off-by:
-
- 12 Apr, 2019 19 commits
-
-
David S. Miller authored
David Howells says: ==================== rxrpc: Fixes Here is a collection of fixes for rxrpc: (1) rxrpc_error_report() needs to call sock_error() to clear the error code from the UDP transport socket, lest it be unexpectedly revisited on the next kernel_sendmsg() call. This has been causing all sorts of weird effects in AFS as the effects have typically been felt by the wrong RxRPC call. (2) Allow a kernel user of AF_RXRPC to easily detect if an rxrpc call has completed. (3) Allow errors incurred by attempting to transmit data through the UDP socket to get back up the stack to AFS. (4) Make AFS use (2) to abort the synchronous-mode call waiting loop if the rxrpc-level call completed. (5) Add a missing tracepoint case for tracing abort reception. (6) Fix detection and handling of out-of-order ACKs. ==================== Tested-by:Jonathan Billings <jsbillin@umich.edu> Signed-off-by:
-
Jeffrey Altman authored
The rxrpc packet serial number cannot be safely used to compute out of order ack packets for several reasons: 1. The allocation of serial numbers cannot be assumed to imply the order by which acks are populated and transmitted. In some rxrpc implementations, delayed acks and ping acks are transmitted asynchronously to the receipt of data packets and so may be transmitted out of order. As a result, they can race with idle acks. 2. Serial numbers are allocated by the rxrpc connection and not the call and as such may wrap independently if multiple channels are in use. In any case, what matters is whether the ack packet provides new information relating to the bounds of the window (the firstPacket and previousPacket in the ACK data). Fix this by discarding packets that appear to wind back the window bounds rather than on serial number procession. Fixes: 298bc15b ("rxrpc: Only take the rwind and mtu values from latest ACK") Signed-off-by:Jeffrey Altman <jaltman@auristor.com> Signed-off-by:
David Howells <dhowells@redhat.com> Tested-by:
Marc Dionne <marc.dionne@auristor.com> Signed-off-by:
-
David Howells authored
Trace received calls that are aborted due to a connection abort, typically because of authentication failure. Without this, connection aborts don't show up in the trace log. Signed-off-by:
-
Marc Dionne authored
Check the state of the rxrpc call backing an afs call in each iteration of the call wait loop in case the rxrpc call has already been terminated at the rxrpc layer. Interrupt the wait loop and mark the afs call as complete if the rxrpc layer call is complete. There were cases where rxrpc errors were not passed up to afs, which could result in this loop waiting forever for an afs call to transition to AFS_CALL_COMPLETE while the rx call was already complete. Signed-off-by:
-
Marc Dionne authored
Change rxrpc_queue_packet()'s signature so that it can return any error code it may encounter when trying to send the packet. This allows the caller to eventually do something in case of error - though it should be noted that the packet has been queued and a resend is scheduled. Signed-off-by:
-
Marc Dionne authored
Make rxrpc_kernel_check_life() pass back the life counter through the argument list and return true if the call has not yet completed. Suggested-by:
-
Marc Dionne authored
When an ICMP or ICMPV6 error is received, the error will be attached to the socket (sk_err) and the report function will get called. Clear any pending error here by calling sock_error(). This would cause the following attempt to use the socket to fail with the error code stored by the ICMP error, resulting in unexpected errors with various side effects depending on the context. Signed-off-by:
-
Colin Ian King authored
The err2 error return path calls qede_ptp_disable that cleans up on an error and frees ptp. After this, the free'd ptp is dereferenced when ptp->clock is set to NULL and the code falls-through to error path err1 that frees ptp again. Fix this by calling qede_ptp_disable and exiting via an error return path that does not set ptp->clock or kfree ptp. Addresses-Coverity: ("Write to pointer after free") Fixes: 03574497 ("qede: Add support for PTP resource locking.") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
Currently if a pci dma mapping failure is detected a free'd memblock address is returned rather than a NULL (that indicates an error). Fix this by ensuring NULL is returned on this error case. Addresses-Coverity: ("Use after free") Fixes: 528f7272 ("vxge: code cleanup and reorganization") Signed-off-by: -
Tetsuo Handa authored
KMSAN will complain if valid address length passed to udpv6_pre_connect() is shorter than sizeof("struct sockaddr"->sa_family) bytes. (This patch is bogus if it is guaranteed that udpv6_pre_connect() is always called after checking "struct sockaddr"->sa_family. In that case, we want a comment why we don't need to check valid address length here.) Signed-off-by:Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
Tetsuo Handa authored
KMSAN will complain if valid address length passed to bpf_bind() is shorter than sizeof("struct sockaddr"->sa_family) bytes. Signed-off-by:Andrey Ignatov <rdna@fb.com> Signed-off-by:
-
Tetsuo Handa authored
KMSAN will complain if valid address length passed to bind() is shorter than sizeof(struct sockaddr_llc) bytes. Signed-off-by:
-
Tetsuo Handa authored
KMSAN will complain if valid address length passed to bind() is shorter than sizeof(struct sockaddr_sco) bytes. Signed-off-by:
-
Tetsuo Handa authored
KMSAN will complain if valid address length passed to bind() is shorter than sizeof(struct sockaddr_rxrpc) bytes. Signed-off-by:
-
Tetsuo Handa authored
KMSAN will complain if valid address length passed to bind() is shorter than sizeof(struct sockaddr_nl) bytes. Signed-off-by:
-
Tetsuo Handa authored
KMSAN will complain if valid address length passed to connect() is shorter than sizeof("struct sockaddr"->sa_family) bytes. Signed-off-by:Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Tetsuo Handa authored
KMSAN will complain if valid address length passed to bind() is shorter than sizeof("struct sockaddr_mISDN"->family) bytes. Signed-off-by: -
Tetsuo Handa authored
syzbot is reporting uninitialized value at rds_connect() [1] and rds_bind() [2]. This is because syzbot is passing ulen == 0 whereas these functions expect that it is safe to access sockaddr->family field in order to determine minimal address length for validation. [1] https://syzkaller.appspot.com/bug?id=f4e61c010416c1e6f0fa3ffe247561b60a50ad71 [2] https://syzkaller.appspot.com/bug?id=a4bf9e41b7e055c3823fdcd83e8c58ca7270e38fReported-by:
syzbot <syzbot+0049bebbf3042dbd2e8f@syzkaller.appspotmail.com> Reported-by:
syzbot <syzbot+915c9f99f3dbc4bd6cd1@syzkaller.appspotmail.com> Signed-off-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Eric Dumazet authored
After commit e21db6f6 ("tcp: track total bytes delivered with ECN CE marks") core TCP stack does a very good job tracking ECN signals. The "sender's best estimate of CE information" Yuchung mentioned in his patch is indeed the best we can do. DCTCP can use tp->delivered_ce and tp->delivered to not duplicate the logic, and use the existing best estimate. This solves some problems, since current DCTCP logic does not deal with losses and/or GRO or ack aggregation very well. This also removes a dubious use of inet_csk(sk)->icsk_ack.rcv_mss (this should have been tp->mss_cache), and a 64 bit divide. Finally, we can see that the DCTCP logic, calling dctcp_update_alpha() for every ACK could be done differently, calling it only once per RTT. Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
- 11 Apr, 2019 19 commits
-
-
David Ahern authored
A couple of tests are verifying a route has been removed. The helper expects the prefix as the first part of the expected output. When checking that a route has been deleted the prefix is empty leading to an invalid ip command: $ ip ro ls match Command line is not complete. Try option "help" Fix by moving the comparison of expected output and output to a new function that is used by both check_route and check_route6. Use the new helper for the 2 checks on route removal. Also, remove the reset of 'set -x' in route_setup which overrides the user managed setting. Fixes: d69faad7 ("selftests: fib_tests: Add prefix route tests with metric") Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
YueHaibing authored
Syzkaller report this: BUG: unable to handle kernel paging request at fffffbfff830524b PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c9716067 PTE 0 Oops: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__list_add_valid+0x21/0xe0 lib/list_debug.c:23 Code: 8b 0c 24 e9 17 fd ff ff 90 55 48 89 fd 48 8d 7a 08 53 48 89 d3 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 0f 85 8b 00 00 00 48 8b 53 08 48 39 f2 75 35 48 89 f2 RSP: 0018:ffff8881ea2278d0 EFLAGS: 00010282 RAX: dffffc0000000000 RBX: ffffffffc1829250 RCX: 1ffff1103d444ef4 RDX: 1ffffffff830524b RSI: ffffffff85659300 RDI: ffffffffc1829258 RBP: ffffffffc1879250 R08: fffffbfff0acb269 R09: fffffbfff0acb269 R10: ffff8881ea2278f0 R11: fffffbfff0acb268 R12: ffffffffc1829250 R13: dffffc0000000000 R14: 0000000000000008 R15: ffffffffc187c830 FS: 00007fe0361df700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff830524b CR3: 00000001eb39a001 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __list_add include/linux/list.h:60 [inline] list_add include/linux/list.h:79 [inline] proto_register+0x444/0x8f0 net/core/sock.c:3375 nr_proto_init+0x73/0x4b3 [netrom] ? 0xffffffffc1628000 ? 0xffffffffc1628000 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe0361dec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007fe0361dec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0361df6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: netrom(+) ax25 fcrypt pcbc af_alg arizona_ldo1 v4l2_common videodev media v4l2_dv_timings hdlc ide_cd_mod snd_soc_sigmadsp_regmap snd_soc_sigmadsp intel_spi_platform intel_spi mtd spi_nor snd_usbmidi_lib usbcore lcd ti_ads7950 hi6421_regulator snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_hda_ext_core snd_hda_core snd_soc_rt5663 snd_soc_core snd_pcm_dmaengine snd_compress snd_soc_rl6231 mac80211 rtc_rc5t583 spi_slave_time leds_pwm hid_gt683r hid industrialio_triggered_buffer kfifo_buf industrialio ir_kbd_i2c rc_core led_class_flash dwc_xlgmac snd_ymfpci gameport snd_mpu401_uart snd_rawmidi snd_ac97_codec snd_pcm ac97_bus snd_opl3_lib snd_timer snd_seq_device snd_hwdep snd soundcore iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic piix aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ide_core psmouse input_leds i2c_piix4 serio_raw intel_agp intel_gtt ata_generic agpgart pata_acpi parport_pc rtc_cmos parport floppy sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: rxrpc] Dumping ftrace buffer: (ftrace buffer empty) CR2: fffffbfff830524b ---[ end trace 039ab24b305c4b19 ]--- If nr_proto_init failed, it may forget to call proto_unregister, tiggering this issue.This patch rearrange code of nr_proto_init to avoid such issues. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Andy Duan authored
Some SOC like i.MX6SX clock have some limits: - ahb clock should be disabled before ipg. - ahb and ipg clocks are required for MAC MII bus. So, move the ahb clock to runtime management together with ipg clock. Signed-off-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
-
Nikolay Aleksandrov authored
br_multicast_start_querier() walks over the port list but it can be called from a timer with only multicast_lock held which doesn't protect the port list, so use RCU to walk over it. Fixes: c83b8fab ("bridge: Restart queries when last querier expires") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
David S. Miller authored
Matteo Croce says: ==================== Fix thunderx MTU with XDP The thunderx driver can't use XDP with all MTU values. This patches sets the right MTU values, and add a check to avoid setting a wrong value which will not function. v3: Fix a copy-paste from two functions, tested on proper hardware: 2: enP2p1s0v0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 1c:1b:0d:0d:52:a4 brd ff:ff:ff:ff:ff:ff [ 787.019730] nicvf 0002:01:00.1 enP2p1s0v0: Jumbo frames not yet supported with XDP, current MTU 1800. RTNETLINK answers: Operation not supported [ 800.574568] nicvf 0002:01:00.1 enP2p1s0v0: Link is Up 10000 Mbps Full duplex [ 807.248321] nicvf 0002:01:00.1 enP2p1s0v0: Jumbo frames not yet supported with XDP, current MTU 1500. RTNETLINK answers: Invalid argument ==================== Signed-off-by: -
Matteo Croce authored
The thunderx driver forbids to load an eBPF program if the MTU is too high, but this can be circumvented by loading the eBPF, then raising the MTU. Fix this by limiting the MTU if an eBPF program is already loaded. Fixes: 05c773f5 ("net: thunderx: Add basic XDP support") Signed-off-by:
Matteo Croce <mcroce@redhat.com> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Matteo Croce authored
The thunderx driver splits frames bigger than 1530 bytes to multiple pages, making impossible to run an eBPF program on it. This leads to a maximum MTU of 1508 if QinQ is in use. The thunderx driver forbids to load an eBPF program if the MTU is higher than 1500 bytes. Raise the limit to 1508 so it is possible to use L2 protocols which need some more headroom. Fixes: 05c773f5 ("net: thunderx: Add basic XDP support") Signed-off-by:
-
David S. Miller authored
Ursula Braun says: ==================== net/smc: fixes 2019-04-11 here are some fixes in different areas of the smc code for the net tree. ==================== Signed-off-by: -
Ursula Braun authored
Commit <26d92e95> ("net/smc: move unhash as early as possible in smc_release()") fixes one occurrence in the smc code, but the same pattern exists in other places. This patch covers the remaining occurrences and makes sure, the unhash operation is done before the smc->clcsock is released. This avoids a potential use-after-free in smc_diag_dump(). Reviewed-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
-
Karsten Graul authored
The FLUSH command is used to empty the pnet table. No return code is expected from the command. Commit a9d8b0b1e3d6 added namespace support for the pnet table and changed the FLUSH command processing to call smc_pnet_remove_by_pnetid() to remove the pnet entries. This function returns -ENOENT when no entry was deleted, which is now the return code of the FLUSH command. As a result the FLUSH command will return an error when the pnet table is already empty. Restore the expected behavior and let FLUSH always return 0. Fixes: a9d8b0b1e3d6 ("net/smc: add pnet table namespace support") Signed-off-by: -
Ursula Braun authored
fcntl(fd, F_SETOWN, getpid()) selects the recipient of SIGURG signals that are delivered when out-of-band data arrives on socket fd. If an SMC socket program makes use of such an fcntl() call, it fails in case of fallback to TCP-mode. In case of fallback the traffic is processed with the internal TCP socket. Propagating field "file" from the SMC socket to the internal TCP socket fixes the issue. Reviewed-by:
-
Kangjie Lu authored
In case alloc_ordered_workqueue fails, the fix returns NULL to avoid NULL pointer dereference. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
-
Karsten Graul authored
When the clcsock is already released using sock_release() and a pending smc_listen_work accesses the clcsock than that will fail. Solve this by canceling and waiting for the work to complete first. Because the work holds the sock_lock it must make sure that the lock is not hold before the new helper smc_clcsock_release() is invoked. And before the smc_listen_work starts working check if the parent listen socket is still valid, otherwise stop the work early. Signed-off-by:
-
Lorenzo Bianconi authored
gue tunnels run iptunnel_pull_offloads on received skbs. This can determine a possible use-after-free accessing guehdr pointer since the packet will be 'uncloned' running pskb_expand_head if it is a cloned gso skb (e.g if the packet has been sent though a veth device) Fixes: a09a4c8d ("tunnels: Remove encapsulation offloads on decap") Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
-
Hoang Le authored
When binding multiple services with specific type 1Ki, 2Ki.., this leads to some entries in the name table of publications missing when listed out via 'tipc name show'. The problem is at identify zero last_type conditional provided via netlink. The first is initial 'type' when starting name table dummping. The second is continuously with zero type (node state service type). Then, lookup function failure to finding node state service type in next iteration. To solve this, adding more conditional to marked as dirty type and lookup correct service type for the next iteration instead of select the first service as initial 'type' zero. Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by:
-
Jason Wang authored
We used to accept zero size iova range which will lead a infinite loop in translate_desc(). Fixing this by failing the request in this case. Reported-by: syzbot+d21e6e297322a900c128@syzkaller.appspotmail.com Fixes: 6b1e6cc7 ("vhost: new device IOTLB API") Signed-off-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Jakub Kicinski authored
Unlike '&&' operator, the '&' does not have short-circuit evaluation semantics. IOW both sides of the operator always get evaluated. Fix the wrong operator in tls_is_sk_tx_device_offloaded(), which would lead to out-of-bounds access for for non-full sockets. Fixes: 4799ac81 ("tls: Add rx inline crypto offload") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
Si-Wei Liu authored
When a netdev appears through hot plug then gets enslaved by a failover master that is already up and running, the slave will be opened right away after getting enslaved. Today there's a race that userspace (udev) may fail to rename the slave if the kernel (net_failover) opens the slave earlier than when the userspace rename happens. Unlike bond or team, the primary slave of failover can't be renamed by userspace ahead of time, since the kernel initiated auto-enslavement is unable to, or rather, is never meant to be synchronized with the rename request from userspace. As the failover slave interfaces are not designed to be operated directly by userspace apps: IP configuration, filter rules with regard to network traffic passing and etc., should all be done on master interface. In general, userspace apps only care about the name of master interface, while slave names are less important as long as admin users can see reliable names that may carry other information describing the netdev. For e.g., they can infer that "ens3nsby" is a standby slave of "ens3", while for a name like "eth0" they can't tell which master it belongs to. Historically the name of IFF_UP interface can't be changed because there might be admin script or management software that is already relying on such behavior and assumes that the slave name can't be changed once UP. But failover is special: with the in-kernel auto-enslavement mechanism, the userspace expectation for device enumeration and bring-up order is already broken. Previously initramfs and various userspace config tools were modified to bypass failover slaves because of auto-enslavement and duplicate MAC address. Similarly, in case that users care about seeing reliable slave name, the new type of failover slaves needs to be taken care of specifically in userspace anyway. It's less risky to lift up the rename restriction on failover slave which is already UP. Although it's possible this change may potentially break userspace component (most likely configuration scripts or management software) that assumes slave name can't be changed while UP, it's relatively a limited and controllable set among all userspace components, which can be fixed specifically to listen for the rename events on failover slaves. Userspace component interacting with slaves is expected to be changed to operate on failover master interface instead, as the failover slave is dynamic in nature which may come and go at any point. The goal is to make the role of failover slaves less relevant, and userspace components should only deal with failover master in the long run. Fixes: 30c8bd5a ("net: Introduce generic failover module") Signed-off-by:
Si-Wei Liu <si-wei.liu@oracle.com> Reviewed-by:
Liran Alon <liran.alon@oracle.com> Acked-by:
Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by:
-
Hangbin Liu authored
After adding a team interface to bridge, the team interface will enter promisc mode. Then if we add a new slave to team0, the slave will keep promisc off. Fix it by setting slave to promisc on if team master is already in promisc mode, also do the same for allmulti. v2: add promisc and allmulti checking when delete ports Fixes: 3d249d4c ("net: introduce ethernet teaming device") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
