- 21 Aug, 2020 3 commits
-
-
Rafael J. Wysocki authored
commit dae68d7f upstream. If context is not NULL in acpiphp_grab_context(), but the is_going_away flag is set for the device's parent, the reference counter of the context needs to be decremented before returning NULL or the context will never be freed, so make that happen. Fixes: edf5bf34 ("ACPI / dock: Use callback pointers from devices' ACPI hotplug contexts") Reported-by:
Vasily Averin <vvs@virtuozzo.com> Cc: 3.15+ <stable@vger.kernel.org> # 3.15+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Gleixner authored
commit f0c7baca upstream. John reported that on a RK3288 system the perf per CPU interrupts are all affine to CPU0 and provided the analysis: "It looks like what happens is that because the interrupts are not per-CPU in the hardware, armpmu_request_irq() calls irq_force_affinity() while the interrupt is deactivated and then request_irq() with IRQF_PERCPU | IRQF_NOBALANCING. Now when irq_startup() runs with IRQ_STARTUP_NORMAL, it calls irq_setup_affinity() which returns early because IRQF_PERCPU and IRQF_NOBALANCING are set, leaving the interrupt on its original CPU." This was broken by the recent commit which blocked interrupt affinity setting in hardware before activation of the interrupt. While this works in general, it does not work for this particular case. As contrary to the initial analysis not all interrupt chip drivers implement an activate callback, the safe cure is to make the deferred interrupt affinity setting at activation time opt-in. Implement the necessary core logic and make the two irqchip implementations for which this is required opt-in. In hindsight this would have been the right thing to do, but ... Fixes: baedb87d ("genirq/affinity: Handle affinity setting on inactive interrupts correctly") Reported-by:
John Keeping <john@metanate.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Marc Zyngier <maz@kernel.org> Acked-by:
-
Steve French authored
commit 0a018944 upstream. When mounting with Kerberos, users have been confused about the default error returned in scenarios in which either keyutils is not installed or the user did not properly acquire a krb5 ticket. Log a warning message in the case that "ENOKEY" is returned from the get_spnego_key upcall so that users can better understand why mount failed in those two cases. CC: Stable <stable@vger.kernel.org> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
- 19 Aug, 2020 37 commits
-
-
Greg Kroah-Hartman authored
Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
-
Oleksandr Andrushchenko authored
commit 5fa4e6f1 upstream. It is possible that the scatter-gather table during dmabuf import has non-zero offset of the data, but user-space doesn't expect that. Fix this by failing the import, so user-space doesn't access wrong data. Fixes: bf8dc55b ("xen/gntdev: Implement dma-buf import functionality") Signed-off-by:
Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Acked-by:
Juergen Gross <jgross@suse.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200813062113.11030-2-andr2000@gmail.comSigned-off-by:
-
Roger Pau Monne authored
commit 88a479ff upstream. So it can be killed, or else processes can get hung indefinitely waiting for balloon pages. Signed-off-by:
Roger Pau Monné <roger.pau@citrix.com> Reviewed-by:
-
Roger Pau Monne authored
commit 1951fa33 upstream. target_unpopulated is incremented with nr_pages at the start of the function, but the call to free_xenballooned_pages will only subtract pgno number of pages, and thus the rest need to be subtracted before returning or else accounting will be skewed. Signed-off-by:
-
Jon Derrick authored
commit ec016089 upstream. Commit 711419e5 ("irqdomain: Add the missing assignment of domain->fwnode for named fwnode") unintentionally caused a dangling pointer page fault issue on firmware nodes that were freed after IRQ domain allocation. Commit e3beca48 fixed that dangling pointer issue by only freeing the firmware node after an IRQ domain allocation failure. That fix no longer frees the firmware node immediately, but leaves the firmware node allocated after the domain is removed. The firmware node must be kept around through irq_domain_remove, but should be freed it afterwards. Add the missing free operations after domain removal where where appropriate. Fixes: e3beca48 ("irqdomain/treewide: Keep firmware node unconditionally allocated") Signed-off-by:
Jon Derrick <jonathan.derrick@intel.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1595363169-7157-1-git-send-email-jonathan.derrick@intel.comSigned-off-by:
-
Nathan Huckleberry authored
commit b4d5ec9b upstream. Since clang does not push pc and sp in function prologues, the current implementation of unwind_frame does not work. By using the previous frame's lr/fp instead of saved pc/sp we get valid unwinds on clang-built kernels. The bounds check on next frame pointer must be changed as well since there are 8 less bytes between frames. This fixes /proc/<pid>/stack. Link: https://github.com/ClangBuiltLinux/linux/issues/912Reported-by:
Miles Chen <miles.chen@mediatek.com> Tested-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Huckleberry <nhuck@google.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Sven Schnelle authored
commit 5b24993c upstream. When using kexec the SBA IOMMU IBASE might still have the RE bit set. This triggers a WARN_ON when trying to write back the IBASE register later, and it also makes some mask calculations fail. Cc: <stable@vger.kernel.org> Signed-off-by:
Sven Schnelle <svens@stackframe.org> Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
John David Anglin authored
commit e96ebd58 upstream. This patch implements the __smp_store_release and __smp_load_acquire barriers using ordered stores and loads. This avoids the sync instruction present in the generic implementation. Cc: <stable@vger.kernel.org> # 4.14+ Signed-off-by:
Dave Anglin <dave.anglin@bell.net> Signed-off-by:
-
Sivaprakash Murugesan authored
commit 443440cc upstream. SFLASHC_BURST_CFG is only available on older ipq NAND platforms, this register has been removed when the NAND controller got implemented in the qpic controller. Avoid writing this register on devices which are based on qpic NAND controller. Fixes: dce84760 ("mtd: nand: qcom: Support for IPQ8074 QPIC NAND controller") Cc: stable@vger.kernel.org Signed-off-by:
Sivaprakash Murugesan <sivaprak@codeaurora.org> Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1591948696-16015-2-git-send-email-sivaprak@codeaurora.orgSigned-off-by:
-
Christian Eggers authored
commit aa9e862d upstream. Simply copying all xfers from userspace into one bounce buffer causes alignment problems if the SPI controller uses DMA. Ensure that all transfer data blocks within the rx and tx bounce buffers are aligned for DMA (according to ARCH_KMALLOC_MINALIGN). Alignment may increase the usage of the bounce buffers. In some cases, the buffers may need to be increased using the "bufsiz" module parameter. Signed-off-by:
Christian Eggers <ceggers@arri.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200728100832.24788-1-ceggers@arri.deSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Romain Naour authored
commit 7f897acb upstream. Since the patch [1], building the kernel using a toolchain built with binutils 2.33.1 prevents booting a sh4 system under Qemu. Apply the patch provided by Alan Modra [2] that fix alignment of rodata. [1] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=ebd2263ba9a9124d93bbc0ece63d7e0fae89b40e [2] https://www.sourceware.org/ml/binutils/2019-12/msg00112.htmlSigned-off-by:
Romain Naour <romain.naour@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Alan Modra <amodra@gmail.com> Cc: Bin Meng <bin.meng@windriver.com> Cc: Chen Zhou <chenzhou10@huawei.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Rich Felker <dalias@libc.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Arnd Bergmann <arnd@arndb.de> Cc: <stable@vger.kernel.org> Link: https://marc.info/?l=linux-sh&m=158429470221261Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Ivan Kokshaysky authored
commit 10470dec upstream. Commit 0c868627 (cpufreq: dt: Allow platform specific intermediate callbacks) added two function pointers to the struct cpufreq_dt_platform_data. However, armada37xx_cpufreq_driver_init() has this struct (pdata) located on the stack and uses only "suspend" and "resume" fields. So these newly added "get_intermediate" and "target_intermediate" pointers are uninitialized and contain arbitrary non-null values, causing all kinds of trouble. For instance, here is an oops on espressobin after an attempt to change the cpefreq governor: [ 29.174554] Unable to handle kernel execute from non-executable memory at virtual address ffff00003f87bdc0 ... [ 29.269373] pc : 0xffff00003f87bdc0 [ 29.272957] lr : __cpufreq_driver_target+0x138/0x580 ... Fixed by zeroing out pdata before use. Cc: <stable@vger.kernel.org> # v5.7+ Signed-off-by:
Ivan Kokshaysky <ink@jurassic.park.msu.ru> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
-
Trond Myklebust authored
commit d474f961 upstream. If the NFS_LAYOUT_RETURN_REQUESTED flag is set, we want to return the layout as soon as possible, meaning that the affected layout segments should be marked as invalid, and should no longer be in use for I/O. Fixes: f0b42981 ("pNFS: Ignore non-recalled layouts in pnfs_layout_need_return()") Cc: stable@vger.kernel.org # v4.19+ Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Trond Myklebust authored
commit ff041727 upstream. If the layout segment is still in use for a read or a write, we should not move it to the layout plh_return_segs list. If we do, we can end up returning the layout while I/O is still in progress. Fixes: e0b7d420 ("pNFS: Don't discard layout segments that are marked for return") Cc: stable@vger.kernel.org # v4.19+ Signed-off-by:
-
Dave Airlie authored
commit 5de5b6ec upstream. This is confusing, and from my reading of all the drivers only nouveau got this right. Just make the API act under driver control of it's own allocation failing, and don't call destroy, if the page table fails to create there is nothing to cleanup here. (I'm willing to believe I've missed something here, so please review deeply). Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200728041736.20689-1-airlied@gmail.comSigned-off-by:
-
Zheng Bin authored
commit cb0aae0e upstream. v9fs_mount v9fs_session_init v9fs_cache_session_get_cookie v9fs_random_cachetag -->alloc cachetag v9ses->fscache = fscache_acquire_cookie -->maybe NULL sb = sget -->fail, goto clunk clunk_fid: v9fs_session_close if (v9ses->fscache) -->NULL kfree(v9ses->cachetag) Thus memleak happens. Link: http://lkml.kernel.org/r/20200615012153.89538-1-zhengbin13@huawei.com Fixes: 60e78d2c ("9p: Add fscache support to 9p") Cc: <stable@vger.kernel.org> # v2.6.32+ Signed-off-by:
Zheng Bin <zhengbin13@huawei.com> Signed-off-by:
Dominique Martinet <asmadeus@codewreck.org> Signed-off-by:
-
Hector Martin authored
commit 6e859617 upstream. This is just another Pioneer device with fixed endpoints. Input is dummy but used as feedback (it always returns silence). Cc: stable@vger.kernel.org Signed-off-by:
Hector Martin <marcan@marcan.st> Link: https://lore.kernel.org/r/20200810082502.225979-1-marcan@marcan.stSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Eric Biggers authored
commit 270ef410 upstream. If the minix filesystem tries to map a very large logical block number to its on-disk location, block_to_path() can return offsets that are too large, causing out-of-bounds memory accesses when accessing indirect index blocks. This should be prevented by the check against the maximum file size, but this doesn't work because the maximum file size is read directly from the on-disk superblock and isn't validated itself. Fix this by validating the maximum file size at mount time. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzbot+c7d9ec7a1a7272dd71b3@syzkaller.appspotmail.com Reported-by: syzbot+3b7b03a0c28948054fb5@syzkaller.appspotmail.com Reported-by: syzbot+6e056ee473568865f3e6@syzkaller.appspotmail.com Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Eric Biggers authored
commit facb03dd upstream. If an inode has no links, we need to mark it bad rather than allowing it to be accessed. This avoids WARNINGs in inc_nlink() and drop_nlink() when doing directory operations on a fuzzed filesystem. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzbot+a9ac3de1b5de5fb10efc@syzkaller.appspotmail.com Reported-by: syzbot+df958cf5688a96ad3287@syzkaller.appspotmail.com Signed-off-by:
-
Eric Biggers authored
commit da27e0a0 upstream. Patch series "fs/minix: fix syzbot bugs and set s_maxbytes". This series fixes all syzbot bugs in the minix filesystem: KASAN: null-ptr-deref Write in get_block KASAN: use-after-free Write in get_block KASAN: use-after-free Read in get_block WARNING in inc_nlink KMSAN: uninit-value in get_block WARNING in drop_nlink It also fixes the minix filesystem to set s_maxbytes correctly, so that userspace sees the correct behavior when exceeding the max file size. This patch (of 6): sb_getblk() can fail, so check its return value. This fixes a NULL pointer dereference. Originally from Qiujun Huang. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzbot+4a88b2b9dc280f47baf4@syzkaller.appspotmail.com Signed-off-by:
-
Jakub Kicinski authored
commit 444da3f5 upstream. When ur_load_imm_any() is inlined into jeq_imm(), it's possible for the compiler to deduce a case where _val can only have the value of -1 at compile time. Specifically, /* struct bpf_insn: _s32 imm */ u64 imm = insn->imm; /* sign extend */ if (imm >> 32) { /* non-zero only if insn->imm is negative */ /* inlined from ur_load_imm_any */ u32 __imm = imm >> 32; /* therefore, always 0xffffffff */ if (__builtin_constant_p(__imm) && __imm > 255) compiletime_assert_XXX() This can result in tripping a BUILD_BUG_ON() in __BF_FIELD_CHECK() that checks that a given value is representable in one byte (interpreted as unsigned). FIELD_FIT() should return true or false at runtime for whether a value can fit for not. Don't break the build over a value that's too large for the mask. We'd prefer to keep the inlining and compiler optimizations though we know this case will always return false. Cc: stable@vger.kernel.org Fixes: 1697599e ("bitfield.h: add FIELD_FIT() helper") Link: https://lore.kernel.org/kernel-hardening/CAK7LNASvb0UDJ0U5wkYYRzTAdnEs64HjXpEUL7d=V0CXiAXcNw@mail.gmail.com/Reported-by:
Masahiro Yamada <masahiroy@kernel.org> Debugged-by:
Sami Tolvanen <samitolvanen@google.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Mikulas Patocka authored
commit 9e27c991 upstream. There is this call chain: cvm_encrypt -> cvm_enc_dec -> cptvf_do_request -> process_request -> kzalloc where we call sleeping allocator function even if CRYPTO_TFM_REQ_MAY_SLEEP was not specified. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org # v4.11+ Fixes: c694b233 ("crypto: cavium - Add the Virtual Function driver for CPT") Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
John Allen authored
commit 8a302808 upstream. Running the crypto manager self tests with CONFIG_CRYPTO_MANAGER_EXTRA_TESTS may result in several types of errors when using the ccp-crypto driver: alg: skcipher: cbc-des3-ccp encryption failed on test vector 0; expected_error=0, actual_error=-5 ... alg: skcipher: ctr-aes-ccp decryption overran dst buffer on test vector 0 ... alg: ahash: sha224-ccp test failed (wrong result) on test vector ... These errors are the result of improper processing of scatterlists mapped for DMA. Given a scatterlist in which entries are merged as part of mapping the scatterlist for DMA, the DMA length of a merged entry will reflect the combined length of the entries that were merged. The subsequent scatterlist entry will contain DMA information for the scatterlist entry after the last merged entry, but the non-DMA information will be that of the first merged entry. The ccp driver does not take this scatterlist merging into account. To address this, add a second scatterlist pointer to track the current position in the DMA mapped representation of the scatterlist. Both the DMA representation and the original representation of the scatterlist must be tracked as while most of the driver can use just the DMA representation, scatterlist_map_and_copy() must use the original representation and expects the scatterlist pointer to be accurate to the original representation. In order to properly walk the original scatterlist, the scatterlist must be walked until the combined lengths of the entries seen is equal to the DMA length of the current entry being processed in the DMA mapped representation. Fixes: 63b94509 ("crypto: ccp - CCP device driver and interface support") Signed-off-by:
John Allen <john.allen@amd.com> Cc: stable@vger.kernel.org Acked-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
Tom Rix authored
commit c06c7660 upstream. clang static analysis flags this error qat_uclo.c:297:3: warning: Attempt to free released memory [unix.Malloc] kfree(*init_tab_base); ^~~~~~~~~~~~~~~~~~~~~ When input *init_tab_base is null, the function allocates memory for the head of the list. When there is problem allocating other list elements the list is unwound and freed. Then a check is made if the list head was allocated and is also freed. Keeping track of the what may need to be freed is the variable 'tail_old'. The unwinding/freeing block is while (tail_old) { mem_init = tail_old->next; kfree(tail_old); tail_old = mem_init; } The problem is that the first element of tail_old is also what was allocated for the list head init_header = kzalloc(sizeof(*init_header), GFP_KERNEL); ... *init_tab_base = init_header; flag = 1; } tail_old = init_header; So *init_tab_base/init_header are freed twice. There is another problem. When the input *init_tab_base is non null the tail_old is calculated by traveling down the list to first non null entry. tail_old = init_header; while (tail_old->next) tail_old = tail_old->next; When the unwinding free happens, the last entry of the input list will be freed. So the freeing needs a general changed. If locally allocated the first element of tail_old is freed, else it is skipped. As a bit of cleanup, reset *init_tab_base if it came in as null. Fixes: b4b7e67c ("crypto: qat - Intel(R) QAT ucode part of fw loader") Cc: <stable@vger.kernel.org> Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
commit 5ead0517 upstream. There is this call chain: sec_alg_skcipher_encrypt -> sec_alg_skcipher_crypto -> sec_alg_alloc_and_calc_split_sizes -> kcalloc where we call sleeping allocator function even if CRYPTO_TFM_REQ_MAY_SLEEP was not specified. Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Matteo Croce authored
commit fd49e032 upstream. When building a kernel with CONFIG_PSTORE=y and CONFIG_CRYPTO not set, a build error happens: ld: fs/pstore/platform.o: in function `pstore_dump': platform.c:(.text+0x3f9): undefined reference to `crypto_comp_compress' ld: fs/pstore/platform.o: in function `pstore_get_backend_records': platform.c:(.text+0x784): undefined reference to `crypto_comp_decompress' This because some pstore code uses crypto_comp_(de)compress regardless of the CONFIG_CRYPTO status. Fix it by wrapping the (de)compress usage by IS_ENABLED(CONFIG_PSTORE_COMPRESS) Signed-off-by:
Matteo Croce <mcroce@linux.microsoft.com> Link: https://lore.kernel.org/lkml/20200706234045.9516-1-mcroce@linux.microsoft.com Fixes: cb3bee03 ("pstore: Use crypto compress API") Cc: stable@vger.kernel.org Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Hector Martin authored
commit 1b7ecc24 upstream. Further investigation of the L-R swap problem on the MS2109 reveals that the problem isn't that the channels are swapped, but rather that they are swapped and also out of phase by one sample. In other words, the issue is actually that the very first frame that comes from the hardware is a half-frame containing only the right channel, and after that everything becomes offset. So introduce a new quirk field to drop the very first 2 bytes that come in after the format is configured and a capture stream starts. This puts the channels in phase and in the correct order. Cc: stable@vger.kernel.org Signed-off-by:
-
Hector Martin authored
commit 14a720dc upstream. Matching by device matches all interfaces, which breaks the video/HID portions of the device depending on module load order. Fixes: e337bf19 ("ALSA: usb-audio: add quirk for MacroSilicon MS2109") Cc: stable@vger.kernel.org Signed-off-by:
-
Mirko Dietrich authored
commit fec90088 upstream. Adds an entry for Creative USB X-Fi to the rc_config array in mixer_quirks.c to allow use of volume knob on the device. Adds support for newer X-Fi Pro card, known as "Model No. SB1095" with USB ID "041e:3263" Signed-off-by:
Mirko Dietrich <buzz@l4m1.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200806124850.20334-1-buzz@l4m1.deSigned-off-by:
-
Hui Wang authored
commit 386a6539 upstream. After installing the Ubuntu Linux, the micmute led status is not correct. Users expect that the led is on if the capture is disabled, but with the current kernel, the led is off with the capture disabled. We tried the old linux kernel like linux-4.15, there is no this issue. It looks like we introduced this issue when switching to the led_cdev. Cc: <stable@vger.kernel.org> Signed-off-by:
Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20200810021659.7429-1-hui.wang@canonical.comSigned-off-by:
-
Brant Merryman authored
commit 4387b3db upstream. Assign the .throttle and .unthrottle functions to be generic function in the driver structure to prevent data loss that can otherwise occur if the host does not enable USB throttling. Signed-off-by:
Brant Merryman <brant.merryman@silabs.com> Co-developed-by:
Phu Luu <phu.luu@silabs.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Brant Merryman authored
commit c7614ff9 upstream. CP210x hardware disables auto-RTS but leaves auto-CTS when in hardware flow control mode and UART on cp210x hardware is disabled. When re-opening the port, if auto-CTS is enabled on the cp210x, then auto-RTS must be re-enabled in the driver. Signed-off-by:
-
Tim Froidcoeur authored
[ Upstream commit d76f3351 ] In the case of TPROXY, bind_conflict optimizations for SO_REUSEADDR or SO_REUSEPORT are broken, possibly resulting in O(n) instead of O(1) bind behaviour or in the incorrect reuse of a bind. the kernel keeps track for each bind_bucket if all sockets in the bind_bucket support SO_REUSEADDR or SO_REUSEPORT in two fastreuse flags. These flags allow skipping the costly bind_conflict check when possible (meaning when all sockets have the proper SO_REUSE option). For every socket added to a bind_bucket, these flags need to be updated. As soon as a socket that does not support reuse is added, the flag is set to false and will never go back to true, unless the bind_bucket is deleted. Note that there is no mechanism to re-evaluate these flags when a socket is removed (this might make sense when removing a socket that would not allow reuse; this leaves room for a future patch). For this optimization to work, it is mandatory that these flags are properly initialized and updated. When a child socket is created from a listen socket in __inet_inherit_port, the TPROXY case could create a new bind bucket without properly initializing these flags, thus preventing the optimization to work. Alternatively, a socket not allowing reuse could be added to an existing bind bucket without updating the flags, causing bind_conflict to never be called as it should. Call inet_csk_update_fastreuse when __inet_inherit_port decides to create a new bind_bucket or use a different bind_bucket than the one of the listen socket. Fixes: 093d2823 ("tproxy: fix hash locking issue when using port redirection in __inet_inherit_port()") Acked-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Tim Froidcoeur <tim.froidcoeur@tessares.net> Signed-off-by:
-
Tim Froidcoeur authored
[ Upstream commit 62ffc589 ] Refactor the fastreuse update code in inet_csk_get_port into a small helper function that can be called from other places. Acked-by:
-
Ira Weiny authored
[ Upstream commit b06c19d9 ] When MSG_OOB is specified to tls_device_sendpage() the mapped page is never unmapped. Hold off mapping the page until after the flags are checked and the page is actually needed. Fixes: e8f69799 ("net/tls: Add generic NIC offload infrastructure") Signed-off-by:
Ira Weiny <ira.weiny@intel.com> Reviewed-by:
-
Miaohe Lin authored
[ Upstream commit ce787a5a ] We should fput() file iff FDPUT_FPUT is set. So we should set fput_needed accordingly. Fixes: 00e188ef ("sockfd_lookup_light(): switch to fdget^W^Waway from fget_light") Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
-
Qingyu Li authored
[ Upstream commit 26896f01 ] When creating a raw AF_NFC socket, CAP_NET_RAW needs to be checked first. Signed-off-by:
Qingyu Li <ieatmuttonchuan@gmail.com> Signed-off-by:
-
