- 08 Jun, 2023 7 commits
-
-
Wang Jianzheng authored
Remove unneeded variable and directly return 0. Signed-off-by:
Wang Jianzheng <wangjianzheng@vivo.com> Acked-by:
Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by:
Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by:
Artur Weber <aweber.kernel@gmail.com> Signed-off-by:
-
Karol Wachowski authored
Whenever KMD maps region larger than 64kB that is both aligned and contiguous, set contiguous bit (52) in MMU PTE descriptor for each page in that region. This allows to treat 16 contiguous pages as one and reduce number of MMU page walks required which results in lower latency. Signed-off-by:
Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by:
Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by:
Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by:
-
Karol Wachowski authored
Simplify and unify naming convention in MMU600 page tables configuration. All DMA addresses in page tables directly accessed by VPU are called with _dma sufix and all CPU pointers to those page tables have _ptr sufix. Base pointers used to do a page walk on the CPU have corresponding names: pud_ptrs (pointers used to get access to PUD DMA) pmd_ptrs (pointers used to get access to PMD DMA) pte_ptrs (pointers used to get access to PTE DMA) with the following convention: u64 *pud_dma_ptr = pud_ptrs[pgd_idx]; *pud_dma_ptr = pud_dma; u64 *pmd_dma_ptr = pmd_ptrs[pgd_idx][pud_idx]; *pmd_dma_ptr = pmd_dma; u64 *pte_dma_ptr = pte_ptrs[pgd_idx][pud_idx][pmd_idx]; *pte_dma_ptr = pte_dma; On the way change to coherent dma allocation, _wc is only valid on ARM and was used by mistake. Signed-off-by:
-
Karol Wachowski authored
Future devices will have different dma bit mask, make it hw specific. Signed-off-by:
-
Karol Wachowski authored
Program additional fourth level required for mappings with VA above 38bits. Co-developed-by:
Raymond Tan <raymond.tan@intel.com> Signed-off-by:
-
Karol Wachowski authored
MTL HW only uses StreamId0 and StreamId3 that map to TBU0 and TBU2. Signed-off-by:
-
Christophe JAILLET authored
Use struct_size() instead of hand-writing it. It is less verbose, more robust and more informative. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Marco Pagani <marpagan@redhat.com> Signed-off-by:
-
- 07 Jun, 2023 3 commits
-
-
Laura Nao authored
Add a panel entry for the AUO B116XAB01.4 edp panel, found in the Acer Chromebook Spin 311 (CP311-3H) laptop. Signed-off-by:
Laura Nao <laura.nao@collabora.com> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Dario Binacchi authored
Add support for Rocktech RK043FN48H 4.3" (480x272) LCD-TFT panel. Signed-off-by:
Dario Binacchi <dario.binacchi@amarulasolutions.com> Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202306020343.jNTWeM0P-lkp@intel.com/Reviewed-by:
Jagan Teki <jagan@amarulasolutions.com> Signed-off-by:
-
Dario Binacchi authored
Add compatible to panel-simple for Rocktech Displays Limited RK043FN48H 4.3" 480x272 LCD-TFT panel. Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Reviewed-by:
Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Signed-off-by:
-
- 05 Jun, 2023 2 commits
-
-
Masahiro Yamada authored
With the previous fix, these modules are built from a single C file. Rename the source files so they match the module names. Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Liu Ying <victor.liu@nxp.com> Signed-off-by:
Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230605120021.1774711-2-masahiroy@kernel.org
-
Masahiro Yamada authored
With CONFIG_DRM_IMX8QM_LDB=m and CONFIG_DRM_IMX8QXP_LDB=y (or vice versa), imx-ldb-helper.o is linked to a module and also to vmlinux even though the expected CFLAGS are different between builtins and modules. This is the same situation as fixed by commit 637a642f ("zstd: Fixing mixed module-builtin objects"). Split imx-ldb-helper.c into a separate module. Signed-off-by:
-
- 03 Jun, 2023 2 commits
-
-
Dmitry Osipenko authored
Use dma-fence-unwrap API for waiting each dma-fence of the in-fence array individually. Sync file's in-fence array always has a non-matching fence context ID, which doesn't allow to skip waiting of fences with a matching context ID in a case of a merged sync file fence. Suggested-by:
Rob Clark <robdclark@gmail.com> Reviewed-by:
Emil Velikov <emil.velikov@collabora.com> Tested-by:
Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Signed-off-by:
Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230416115237.798604-3-dmitry.osipenko@collabora.com
-
Dmitry Osipenko authored
Move virtio_gpu_execbuffer_ioctl() into separate virtgpu_submit.c file, refactoring and optimizing the code along the way to ease addition of new features to the ioctl. The optimization is done by using optimal ordering of the job's submission steps, reducing code path from the start of the ioctl to the point of pushing job to virtio queue. Job's initialization is now performed before in-fence is awaited and out-fence setup is made after sending out job to virtio. Reviewed-by:
-
- 02 Jun, 2023 4 commits
-
-
Jeffrey Hugo authored
Carl and Pranjal have been reviewing the QAIC patches. List them as reviewers so that they are copied on all developments which will make it easier for them to continue reviewing QAIC patches. Signed-off-by:
Carl Vanderlip <quic_carlv@quicinc.com> Acked-by:
Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230523161421.11017-1-quic_jhugo@quicinc.com
-
Maxime Ripard authored
I've been using that email address for contributions for a while but it seems I never added it to mailmap. Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Reviewed-by:
Sui Jingfeng <suijingfeng@loongson.cn> Acked-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230531133724.133872-1-maxime@cerno.tech
-
Arnd Bergmann authored
Without this header, the use of FIELD_PREP() can cause a build failure: drivers/gpu/drm/meson/meson_venc.c: In function 'meson_encl_set_gamma_table': drivers/gpu/drm/meson/meson_venc.c:1595:24: error: implicit declaration of function 'FIELD_PREP' [-Werror=implicit-function-declaration] Fixes: 51fc01a0 ("drm/meson: venc: add ENCL encoder setup for MIPI-DSI output") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
-
Yang Li authored
./drivers/gpu/drm/meson/meson_dw_mipi_dsi.c:117:2-3: Unneeded semicolon ./drivers/gpu/drm/meson/meson_dw_mipi_dsi.c:231:2-3: Unneeded semicolon Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5392Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Acked-by:
-
- 01 Jun, 2023 22 commits
-
-
Cong Yang authored
The Starry-ili9882 is a 10.51" WUXGA TFT panel. which fits in nicely with the existing panel-boe-tv101wum-nl6 driver. From the datasheet,MIPI need to keep the LP11 state before the lcm_reset pin is pulled high. So add lp11_before_reset flag. Signed-off-by:
Cong Yang <yangcong5@huaqin.corp-partner.google.com> Reviewed-by:
-
Cong Yang authored
The STARRY ili9882t is a 10.51" WUXGA TFT LCD panel, which fits in nicely with the existing panel-boe-tv101wum-nl6 driver. Hence, we add a new compatible with panel specific config. Signed-off-by:
-
Cong Yang authored
The Starry-himax83102-j02 is a 10.51" WUXGA TFT panel. which fits in nicely with the existing panel-boe-tv101wum-nl6 driver. From the datasheet[1], MIPI needs to keep the LP11 state before the lcm_reset pin is pulled high, so increase lp11_before_reset flag. [1]: https://github.com/HimaxSoftware/Doc/tree/main/Himax_Chipset_Power_SequenceSigned-off-by:
-
Cong Yang authored
The STARRY himax83102-j02 is a 10.51" WUXGA TFT LCD panel, which fits in nicely with the existing panel-boe-tv101wum-nl6 driver. Hence, we add a new compatible with panel specific config. Signed-off-by:
-
Neil Armstrong authored
This updates the panel timings to achieve a clean 60Hz refresh rate. Reviewed-by:
Nicolas Belin <nbelin@baylibre.com> Tested-by: Nicolas Belin <nbelin@baylibre.com> # on Khadas VIM3 + TS050 Panel Signed-off-by:
-
Neil Armstrong authored
The Amlogic G12A/G12B/SM1 SoCs embeds a Synopsys DW-MIPI-DSI transceiver (ver 1.21a), with a custom glue managing the IP resets, clock and data inputs similar to the DW-HDMI Glue on other Amlogic SoCs. This adds support for the Glue managing the transceiver, mimicing the init flow provided by Amlogic to setup the ENCL encoder, the glue, the transceiver, the digital D-PHY and the Analog PHY in the proper way. An optional "MEAS" clock can be enabled to measure the delay between each vsync feeding the DW-MIPI-DSI transceiver. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
-
Neil Armstrong authored
This adds an encoder bridge designed to drive a MIPI-DSI display by using the ENCL encoder through the internal MIPI DSI transceiver connected to the output of the ENCL pixel encoder. Signed-off-by:
-
Neil Armstrong authored
This adds supports for the ENCL encoder connected to a MIPI-DSI transceiver on the Amlogic AXG, G12A, G12B & SM1 SoCs. Signed-off-by:
-
Neil Armstrong authored
Only DW-HDMI currently needs components since it reuses the drm-meson driver context to access HHI registers (sic). Once this is solved, we can get rid on components. Until now, limit the components matching to the dw-hdmi compatibles we know to require this hack, for other bridges simply use probe defer instead and get over this components sitation. The back story is that we simply cannot attach DSI adapters bridges if we use components, only DSI panels, this is because we bind/unbind the DSI controller at each drm-meson driver master bind tentative. With this the I2C DSI bridge is unable to find the DSI controller host and everything fails to probe. This will simplify a lot adding new or older HDMI bridges. Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by:
-
Neil Armstrong authored
If the case the HDMI controller fails to bind, we try to unbind all components before calling drm_dev_put() which makes drm_bridge_detach() crash because unbinding the HDMI controller frees the bridge memory. The solution is the unbind all components at the end like in the remove path. Reviewed-by:
-
Neil Armstrong authored
Add third port corresponding to the ENCL DPI encoder used to connect to DSI or LVDS transceivers. Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Neil Armstrong authored
The Amlogic G12A, G12B & SM1 SoCs embeds a Synopsys DW-MIPI-DSI transceiver (ver 1.21a) with a custom glue managing the IP resets, clock and data inputs similar to the DW-HDMI Glue on the same Amlogic SoC families. Signed-off-by:
-
Marek Vasut authored
Add reset GPIO support. The reset GPIO is cleared after supply regulator was enabled, and set before supply regulator is disabled. Signed-off-by:
Marek Vasut <marex@denx.de> Reviewed-by:
-
Marek Vasut authored
This chip has one reset GPIO input, document it. The reset GPIO is optional as it is sometimes not connected on some hardware. Signed-off-by:
-
Thomas Zimmermann authored
Implement dedicated fbdev helpers for framebuffer I/O instead of using DRM's helpers. Use an fbdev generator macro for deferred I/O to create the fbdev callbacks. i915 was the only caller of the DRM helpers, so remove them from the helper module. i915's fbdev emulation is still incomplete as it doesn't implement deferred I/O and damage handling for mmaped pages. v4: * generate deferred-I/O helpers * use initializer macros for fb_ops v2: * use FB_IO_HELPERS options Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-14-tzimmermann@suse.de
-
Thomas Zimmermann authored
Implement dedicated fbdev helpers for framebuffer I/O instead of using DRM's helpers. Use an fbdev generator macro for deferred I/O to create the callbacks. Fbdev-generic was the only caller of the DRM helpers, so remove them from the helper module. v4: * generate deferred-I/O helpers * use initializer macros for fb_ops v2: * use FB_SYS_HELPERS_DEFERRED option Signed-off-by:
-
Thomas Zimmermann authored
Use the regular fbdev helpers for framebuffer I/O instead of DRM's helpers. Msm does not use damage handling, so DRM's fbdev helpers are mere wrappers around the fbdev code. By using fbdev helpers directly within each DRM fbdev emulation, we can eventually remove DRM's wrapper functions entirely. Msm's fbdev emulation has been incomplete as it didn't implement damage handling. Partilly fix this by implementing damage handling for write and draw operation. It is still missing for mmaped pages. v4: * use initializer macros for struct fb_ops * partially support damage handling v2: * use FB_SYS_HELPERS option Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by:
-
Thomas Zimmermann authored
Export drm_fb_helper_damage() and drm_fb_helper_damage_range(), which handle damage areas for fbdev emulation. This is a temporary export that allows to move the DRM I/O helpers for fbdev into drivers. Only fbdev-generic and i915 need them. Both will be updated to implement damage handling by themselves and the exported functions will be removed. v4: * update interfaces Signed-off-by:
-
Thomas Zimmermann authored
Use the regular fbdev helpers for framebuffer I/O instead of DRM's helpers. Tegra does not use damage handling, so DRM's fbdev helpers are mere wrappers around the fbdev code. By using fbdev helpers directly within each DRM fbdev emulation, we can eventually remove DRM's wrapper functions entirely. v4: * use initializer macros for struct fb_ops v2: * use FB_SYS_HELPERS option Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-10-tzimmermann@suse.de
-
Thomas Zimmermann authored
Use the regular fbdev helpers for framebuffer I/O instead of DRM's helpers. Omapdrm does not use damage handling, so DRM's fbdev helpers are mere wrappers around the fbdev code. By using fbdev helpers directly within each DRM fbdev emulation, we can eventually remove DRM's wrapper functions entirely. v4: * use initializer macros for struct fb_ops v2: * use FB_SYS_HELPERS option Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-9-tzimmermann@suse.de
-
Thomas Zimmermann authored
Use the regular fbdev helpers for framebuffer I/O instead of DRM's helpers. Fbdev-dma does not use damage handling, so DRM's fbdev helpers are mere wrappers around the fbdev code. By using fbdev helpers directly within each DRM fbdev emulation, we can eventually remove DRM's wrapper functions entirely. v4: * use initializer macros for struct fb_ops v2: * use FB_SYS_HELPERS option Signed-off-by:
-
Thomas Zimmermann authored
Use the regular fbdev helpers for framebuffer I/O instead of DRM's helpers. Radeon does not use damage handling, so DRM's fbdev helpers are mere wrappers around the fbdev code. By using fbdev helpers directly within each DRM fbdev emulation, we can eventually remove DRM's wrapper functions entirely. v4: * use initializer macros for struct fb_ops v2: * use FB_IO_HELPERS option Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Acked-by:
-
