- 19 Sep, 2016 40 commits
-
-
Niklas Söderlund authored
The height used for V4L2_FIELD_TOP and V4L2_FIELD_BOTTOM where wrong. The frames only contain one field so the height should be half of the frame. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Niklas Söderlund authored
It was not possible to scale beyond the image size of the video source limitation. The output frame would be bigger but the captured image was limited to the size of the video source. The error was that the crop boundary was set after the requested frame size and not the video source size. This patch breaks out the resetting of the crop, compose and format to separate functions so the error wont creep back. Signed-off-by:
-
Niklas Söderlund authored
The driver forced whatever field was set by the source subdevice to be used. This patch allows the user to change from the default field. Signed-off-by:
-
Niklas Söderlund authored
The field V4L2_FIELD_INTERLACED is standard dependent and should not unconditionally be equivalent to V4L2_FIELD_INTERLACED_TB. This patch adds a check to see if the video standard can be obtained and if it's a 60 Hz format. If the condition is met V4L2_FIELD_INTERLACED is treated as V4L2_FIELD_INTERLACED_BT if not as V4L2_FIELD_INTERLACED_TB. Signed-off-by:
-
Niklas Söderlund authored
If the V4L2_SUBDEV_FORMAT_TRY is used in set_fmt the width, height etc would not be filled. Signed-off-by:
-
Niklas Söderlund authored
The media bus format reported by the adv7180 is wrong. Steve Longerbeam posted a patch which changed the format to UYVY8_2X8 with the commit message: Change the media bus format from YUYV8_2X8 to UYVY8_2X8. Colors now look correct when capturing with the i.mx6 backend. The other option is to set the SWPC bit in register 0x27 to swap the Cr and Cb output samples. The rcar-vin driver was developed and tested with the adv7180 and therefor suffers from the same issue, looking for the wrong media bus format. The two errors corrected each other. This patch takes Steve's patch and merge it with a fix for rcar-vin driver. The rcar-vin driver is used used in together with the adv7180 och Koelsch and this ensures it will not break while fixing the adv7180 issue. I checked wit Steve and he was fine with me merging the patches. ADV7180 parts: Signed-off-by:
Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Tested-by:
Tim Harvey <tharvey@gateworks.com> Signed-off-by:
-
Hans Verkuil authored
This driver has been replaced by the non-soc-camera rcar-vin driver. The soc-camera framework is being deprecated, so drop this older rcar-vin driver in favor of the newer version that does not rely on this deprecated framework. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Hans Verkuil authored
drivers/media/platform/sti/hva/hva-v4l2.c:43:22: warning: symbol 'hva_encoders' was not declared. Should it be static? drivers/media/platform/sti/hva/hva-v4l2.c:1401:24: warning: symbol 'hva_driver' was not declared. Should it be static? Make these static. Signed-off-by:
-
Julia Lawall authored
These structures are only used to copy into other structures, so declare them as const. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct dvb_tuner_ops i@p = { ... }; @ok1@ identifier r.i; expression e; position p; @@ e = i@p @ok2@ identifier r.i; expression e1, e2; position p; @@ memcpy(e1, &i@p, e2) @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; struct dvb_tuner_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct dvb_tuner_ops i = { ... }; // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Baoyou Xie authored
We get 1 warning when building kernel with W=1: drivers/staging/media/omap4iss/iss.c:64:6: warning: no previous prototype for 'omap4iss_flush' [-Wmissing-prototypes] In fact, this function is only used in the file in which it is declared and don't need a declaration, but can be made static. so this patch marks this function with 'static'. Signed-off-by:
Baoyou Xie <baoyou.xie@linaro.org> Acked-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in pr_warn message. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in dev_err message. Signed-off-by:
-
Julia Lawall authored
These i2c_algorithm structures are only stored in the alg field of an i2c_adapter structure, which is declared as const. This declare the structures as const as well. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct i2c_algorithm i@p = { ... }; @ok@ identifier r.i; struct i2c_adapter e; position p; @@ e.alg = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct i2c_algorithm i = { ... }; // </smpl> Signed-off-by:
-
Nick Dyer authored
Add copyright lines for Zodiac who paid for the V4L touch work. Signed-off-by:
Nick Dyer <nick@shmanahar.org> Signed-off-by:
-
Arnd Bergmann authored
Building the UVC gadget into the kernel fails to build when CONFIG_VIDEO_V4L2 is a loadable module: drivers/usb/gadget/function/usb_f_uvc.o: In function `uvc_function_ep0_complete': uvc_configfs.c:(.text.uvc_function_ep0_complete+0x84): undefined reference to `v4l2_event_queue' drivers/usb/gadget/function/usb_f_uvc.o: In function `uvc_function_disable': uvc_configfs.c:(.text.uvc_function_disable+0x34): undefined reference to `v4l2_event_queue' Adding a dependency in USB_CONFIGFS_F_UVC (which is a bool symbol) make the 'select USB_F_UVC' statement turn the USB_F_UVC into 'm' whenever CONFIG_VIDEO_V4L2=m too, avoiding the link failure. Signed-off-by:
-
Arnd Bergmann authored
The newly added atmel-isc driver uses SET_RUNTIME_PM_OPS() to refer to its suspend/resume functions, causing a warning when CONFIG_PM is not set: media/platform/atmel/atmel-isc.c:1477:12: error: 'isc_runtime_resume' defined but not used [-Werror=unused-function] media/platform/atmel/atmel-isc.c:1467:12: error: 'isc_runtime_suspend' defined but not used [-Werror=unused-function] This adds __maybe_unused annotations to avoid the warning without adding an error-prone #ifdef around it. Signed-off-by:
-
Arnd Bergmann authored
The new ad5820 driver uses #ifdef to hide the suspend/resume functions, but gets it wrong when CONFIG_PM_SLEEP is disabled: drivers/media/i2c/ad5820.c:286:12: error: 'ad5820_resume' defined but not used [-Werror=unused-function] drivers/media/i2c/ad5820.c:274:12: error: 'ad5820_suspend' defined but not used [-Werror=unused-function] This replaces the #ifdef with a __maybe_unused annotation that is simpler and harder to get wrong, avoiding the warning. Fixes: bee3d511 ("[media] ad5820: Add driver for auto-focus coil") Signed-off-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Arnd Bergmann authored
The newly added debug mode for the synaptics-rmi4 driver relies on the v4l2 interface and vb2_vmalloc, but those might be configured as loadable modules when the driver itself is built-in, resulting in a link failure: drivers/input/rmi4/rmi_core.o: In function `rmi_f54_remove': rmi_f54.c:(.text.rmi_f54_remove+0x14): undefined reference to `video_unregister_device' rmi_f54.c:(.text.rmi_f54_remove+0x20): undefined reference to `v4l2_device_unregister' drivers/input/rmi4/rmi_core.o: In function `rmi_f54_vidioc_s_input': rmi_f54.c:(.text.rmi_f54_vidioc_s_input+0x10): undefined reference to `video_devdata' drivers/input/rmi4/rmi_core.o: In function `rmi_f54_vidioc_g_input': rmi_f54.c:(.text.rmi_f54_vidioc_g_input+0x10): undefined reference to `video_devdata' drivers/input/rmi4/rmi_core.o: In function `rmi_f54_vidioc_fmt': rmi_f54.c:(.text.rmi_f54_vidioc_fmt+0x10): undefined reference to `video_devdata' drivers/input/rmi4/rmi_core.o: In function `rmi_f54_vidioc_enum_input': rmi_f54.c:(.text.rmi_f54_vidioc_enum_input+0x10): undefined reference to `video_devdata' drivers/input/rmi4/rmi_core.o: In function `rmi_f54_vidioc_querycap': ... The best workaround I could come up with is to disallow the debug mode unless it's actually possible to call it. Fixes: 3a762dbd ("[media] Input: synaptics-rmi4 - add support for F54 diagnostics") Signed-off-by:
-
Arnd Bergmann authored
The newnly added debug mode for the atmel_mxt_ts driver relies on the v4l2 interface and vb2_vmalloc, but those might be configured as loadable modules when the driver itself is built-in, resulting in a link failure: drivers/input/touchscreen/atmel_mxt_ts.o: In function `mxt_vidioc_querycap': atmel_mxt_ts.c:(.text.mxt_vidioc_querycap+0x10): undefined reference to `video_devdata' drivers/input/touchscreen/atmel_mxt_ts.o: In function `mxt_buffer_queue': atmel_mxt_ts.c:(.text.mxt_buffer_queue+0x20): undefined reference to `vb2_plane_vaddr' atmel_mxt_ts.c:(.text.mxt_buffer_queue+0x164): undefined reference to `vb2_buffer_done' drivers/input/touchscreen/atmel_mxt_ts.o: In function `mxt_free_object_table': atmel_mxt_ts.c:(.text.mxt_free_object_table+0x18): undefined reference to `video_unregister_device' atmel_mxt_ts.c:(.text.mxt_free_object_table+0x20): undefined reference to `v4l2_device_unregister' The best workaround I could come up with is to disallow the debug mode unless it's actually possible to call it. Fixes: ecfdd7e2 ("[media] Input: atmel_mxt_ts - output diagnostic debug via V4L2 device") Signed-off-by:
-
Julia Lawall authored
These structures are only used to copy into other structures, so declare them as const. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct dvb_tuner_ops i@p = { ... }; @ok1@ identifier r.i; expression e; position p; @@ e = i@p @ok2@ identifier r.i; expression e1, e2; position p; @@ memcpy(e1, &i@p, e2) @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; struct dvb_tuner_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct dvb_tuner_ops i = { ... }; // </smpl> Signed-off-by:
-
Julia Lawall authored
These structures are only used to copy into other structures, so declare them as const. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct dvb_tuner_ops i@p = { ... }; @ok1@ identifier r.i; expression e; position p; @@ e = i@p @ok2@ identifier r.i; expression e1, e2; position p; @@ memcpy(e1, &i@p, e2) @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; struct dvb_tuner_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct dvb_tuner_ops i = { ... }; // </smpl> Signed-off-by:
-
Julia Lawall authored
For structure types defined in the same file or local header files, find top-level static structure declarations that have the following properties: 1. Never reassigned. 2. Address never taken 3. Not passed to a top-level macro call 4. No pointer or array-typed field passed to a function or stored in a variable. Declare structures having all of these properties as const. Done using Coccinelle. Based on a suggestion by Joe Perches <joe@perches.com>. Signed-off-by:
-
Julia Lawall authored
Check for vb2_ops structures that are only stored in the ops field of a vb2_queue structure. That field is declared const, so vb2_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct vb2_ops i@p = { ... }; @ok@ identifier r.i; struct vb2_queue e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct vb2_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct vb2_ops i = { ... }; // </smpl> Signed-off-by:
Andrey Utkin <andrey.utkin@corp.bluecherry.net> Signed-off-by:
-
Julia Lawall authored
Check for vb2_ops structures that are only stored in the ops field of a vb2_queue structure. That field is declared const, so vb2_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct vb2_ops i@p = { ... }; @ok@ identifier r.i; struct vb2_queue e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct vb2_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct vb2_ops i = { ... }; // </smpl> Signed-off-by:
Fabien Dessenne <fabien.dessenne@st.com> Reviewed-by:
Jacek Anaszewski <j.anaszewski@samsung.com> Reviewed-by:
Benoit Parrot <bparrot@ti.com> [hans.verkuil@cisco.com: dropped soc_camera/rcar_vin.c patch because that driver will be removed] Signed-off-by:
-
Julia Lawall authored
Check for vb2_ops structures that are only stored in the ops field of a vb2_queue structure. That field is declared const, so vb2_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct vb2_ops i@p = { ... }; @ok@ identifier r.i; struct vb2_queue e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct vb2_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct vb2_ops i = { ... }; // </smpl> Signed-off-by:
-
Javier Martinez Canillas authored
Allow the sub-device to be probed asynchronously so a bridge driver that's waiting for the device can be notified and its .bound callback executed. Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Tested-by:
H . Nikolaus Schaller <hns@goldelico.com> Signed-off-by:
-
Julia Lawall authored
Check for snd_pcm_ops structures that are only stored in the ops field of a snd_soc_platform_driver structure or passed as the third argument to snd_pcm_set_ops. The corresponding field or parameter is declared const, so snd_pcm_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct snd_pcm_ops i@p = { ... }; @ok1@ identifier r.i; struct snd_soc_platform_driver e; position p; @@ e.ops = &i@p; @ok2@ identifier r.i; expression e1, e2; position p; @@ snd_pcm_set_ops(e1, e2, &i@p) @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; struct snd_pcm_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct snd_pcm_ops i = { ... }; // </smpl> Signed-off-by:
-
Julia Lawall authored
Check for snd_pcm_ops structures that are only stored in the ops field of a snd_soc_platform_driver structure or passed as the third argument to snd_pcm_set_ops. The corresponding field or parameter is declared const, so snd_pcm_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct snd_pcm_ops i@p = { ... }; @ok1@ identifier r.i; struct snd_soc_platform_driver e; position p; @@ e.ops = &i@p; @ok2@ identifier r.i; expression e1, e2; position p; @@ snd_pcm_set_ops(e1, e2, &i@p) @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; struct snd_pcm_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct snd_pcm_ops i = { ... }; // </smpl> Signed-off-by:
-
Mauro Carvalho Chehab authored
Several multi-line comments added at the vsp1 patch series violate the Kernel CodingStyle. Fix them. Signed-off-by: -
Laurent Pinchart authored
The VYUY format isn't supported on Gen3 hardware, disable it. Gen2 hardware supports VYUY in practice even though the documentation doesn't advertise it, so keep it for Gen2 devices. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
The wpf_configure() function can be called both from IRQ and non-IRQ contexts, use spin_lock_irqsave(). Signed-off-by:
-
Kieran Bingham authored
Adapt vsp1_video_pipeline_run() such that it can iterate each partition required for constructing this frame's display list chain in the event that multiple display lists are required to process in hardware. The first display list is held as the head list object, whilst any following parition display lists are linked to the head by means of vsp1_dl_list_add_chain(). Linking the chained display list headers to process using the auto start mechanism of the hardware is performed during the vsp1_dl_list_commit(). Signed-off-by:
Kieran Bingham <kieran+renesas@bingham.xyz> Signed-off-by:
-
Kieran Bingham authored
The partition algorithm needs to determine the capabilities of each entity in the pipeline to identify the correct maximum partition width. Extend the vsp1 entity operations to provide a max_width operation and use this call to calculate the number of partitions that will be processed by the algorithm. Gen 2 hardware does not require multiple partitioning, and as such will always return a single partition. Signed-off-by:
-
Kieran Bingham authored
When display lists are linked in a chain, they will be processed automatically by the hardware, with each list linking to the next. Only on the last display list will the frame end interrupt be fired to mark the completion event. Upon frame-end, the chain will be iterated to release each display list back to the free list. The chained lists use case (image partitioning) can require up to 64 lists per frame in the worst case scenario, bump up the number of preallocated lists. Signed-off-by:
-
Laurent Pinchart authored
The new VSP1_ENTITY_PARAMS_PARTITION configuration parameters type covers all registers that need to be configured for every partition. This prepares for support of image partitioning, and replaces the .set_memory() operation as the memory registers take different values for every partition. Signed-off-by:
-
Laurent Pinchart authored
Replace the current boolean parameter (full / !full) with an explicit enum. - VSP1_ENTITY_PARAMS_INIT for parameters to be configured at pipeline initialization time only (V4L2 stream on or DRM atomic update) - VSP1_ENTITY_PARAMS_RUNTIME for all parameters that can be freely modified at runtime (through V4L2 controls) This will allow future extensions when implementing image partitioning support. Signed-off-by:
-
Laurent Pinchart authored
The RPF cropping offset for the chroma planes is incorrectly computed, it needs to be divided by the horizontal subsampling factor. Signed-off-by:
-
Laurent Pinchart authored
Cropping on the WPF sink pad restricts the left and top coordinates to 0-255. The same result can be obtained by cropping on the RPF without any such restriction, this feature isn't useful. Disable it. Signed-off-by:
-
Kieran Bingham authored
The DFE and FRE interrupts are both fired at frame completion, as each display list processes a single frame. This won't be true anymore when using image partitioning, switch to DFE in preparation. Signed-off-by:
-
Kieran Bingham authored
The frame-end function releases and completes the buffers on the input and output entities of the pipe before marking the pipe->state as 'STOPPED'. This introduces a race whereby with the pipe->state still 'RUNNING', a QBUF handler can commence processing a frame before the frame_end function has completed. In the event that this happens, a frame queued by QBUF hangs due to the incorrect pipe->state setting which prevents vsp1_pipeline_run from issuing a CMD_STRCMD. By locking the entire function we prevent this from occurring, but we also change the locking state of the buffer release code. This has been analysed visually as acceptable, but it must be considered that this now causes the video->irqlock to be taken under the pipe->irqlock context. Signed-off-by:
-
