- 17 Mar, 2014 11 commits
-
-
Oleksij Rempel authored
Signed-off-by:
Oleksij Rempel <linux@rempel-privat.de> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
Signed-off-by:
-
Oleksij Rempel authored
we will need it for common-beacon Signed-off-by:
-
Oleksij Rempel authored
Signed-off-by:
-
Oleksij Rempel authored
we will need it to make common-beacon code work. Signed-off-by:
-
Oleksij Rempel authored
Signed-off-by:
-
Oleksij Rempel authored
we will need it for ath9k_htc, may be other drivers too Signed-off-by:
-
Oleksij Rempel authored
to reduce difference between ath9k and ath9k_htc Signed-off-by:
-
Oleksij Rempel authored
Signed-off-by:
-
Oleksij Rempel authored
Signed-off-by:
-
Oleksij Rempel authored
Signed-off-by:
-
- 14 Mar, 2014 21 commits
-
-
Jean Delvare authored
One of the benefits of platform_driver_probe() is that you can make the probe function __init. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Cc: Hante Meuleman <meuleman@broadcom.com> Cc: Arend van Spriel <arend@broadcom.com> Cc: John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Joe Perches authored
The use of __constant_<foo> has been unnecessary for quite awhile now. Make these uses consistent with the rest of the kernel. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
John Greene authored
Trivial patch to address this trace. Now calls dma_mapping_error and return -ENOSPC if a problem found. WARNING: at lib/dma-debug.c:933 check_unmap+0x47b/0x960() Hardware name: Aspire 5515 ath5k 0000:02:00.0: DMA-API: device driver failed to check map error[device address=0x00000000874fcd42] [size=45 bytes] [mapped as single] Modules linked in: bnep bluetooth ebtable_filter ebtables ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i cxgb3 mdio libcxgbi ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi arc4 snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device ath5k ath snd_pcm sparse_keymap snd_page_alloc mac80211 snd_timer sp5100_tco snd edac_core k8temp soundcore edac_mce_amd i2c_piix4 cfg80211 rfkill shpchp vhost_net tun macvtap macvlan kvm_amd kvm uinput dm_crypt ata_generic pata_acpi radeon i2c_algo_bit pata_atiixp drm_kms_helper ttm drm r8169 mii i2c_core wmi video sunrpc Pid: 820, comm: firewalld Not tainted 3.9.0-0.rc3.git1.4.fc19.x86_64 #1 Call Trace: <IRQ> [<ffffffff81068df0>] warn_slowpath_common+0x70/0xa0 [<ffffffff81068e6c>] warn_slowpath_fmt+0x4c/0x50 [<ffffffff8137ebeb>] check_unmap+0x47b/0x960 [<ffffffff81021cf5>] ? native_sched_clock+0x15/0x80 [<ffffffff81021d69>] ? sched_clock+0x9/0x10 [<ffffffff8137f12f>] debug_dma_unmap_page+0x5f/0x70 [<ffffffffa048fa07>] ath5k_tasklet_tx+0x157/0x3f0 [ath5k] [<ffffffff810acc0d>] ? sched_clock_local+0x1d/0x80 [<ffffffff81072aa6>] ? tasklet_action+0x56/0x210 [<ffffffff81072ae7>] tasklet_action+0x97/0x210 [<ffffffff8107343f>] __do_softirq+0xff/0x400 [<ffffffff81073905>] irq_exit+0xb5/0xc0 [<ffffffff81728916>] do_IRQ+0x56/0xc0 [<ffffffff8171dc32>] common_interrupt+0x72/0x72 <EOI> [<ffffffff811f1f81>] ? dput+0x111/0x310 [<ffffffff811f1ea7>] ? dput+0x37/0x310 [<ffffffff811e75e8>] link_path_walk+0x528/0x910 [<ffffffff811ea624>] path_openat+0x94/0x530 [<ffffffff811eb148>] do_filp_open+0x38/0x80 [<ffffffff811e1dda>] open_exec+0x4a/0x130 [<ffffffff81238be3>] load_elf_binary+0x7f3/0x18e0 [<ffffffff81021d69>] ? sched_clock+0x9/0x10 [<ffffffff810acc0d>] ? sched_clock_local+0x1d/0x80 [<ffffffff810acd98>] ? sched_clock_cpu+0xa8/0x100 [<ffffffff810d515d>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff810acedf>] ? local_clock+0x5f/0x70 [<ffffffff810d5dbf>] ? lock_release_holdtime.part.28+0xf/0x190 [<ffffffff812383f0>] ? elf_core_dump+0x1980/0x1980 [<ffffffff811e1151>] search_binary_handler+0x1a1/0x4f0 [<ffffffff811e1017>] ? search_binary_handler+0x67/0x4f0 [<ffffffff811e28fc>] do_execve_common.isra.26+0x64c/0x710 [<ffffffff811e23c2>] ? do_execve_common.isra.26+0x112/0x710 [<ffffffff811e2cc6>] sys_execve+0x36/0x50 [<ffffffff81727249>] stub_execve+0x69/0xa0 Signed-off-by:
John Greene <jogreene@redhat.com> Signed-off-by:
-
Felix Fietkau authored
On older chips, the INI value differ in similar ways as cycpwr_thr1, so convert it to absolute values as well. Since the ANI algorithm is different here compared to the old implementation (fewer steps, controlled at a different point in time), it makes sense to use values similar to what would be applied for newer chips, just without relying on INI defaults. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Felix Fietkau authored
The table was copied from the ANI implementation of AR9300. It assumes that the INI values contain a baseline value that is usable as reference from which to increase/decrease based on the noise immunity value. On older chips, the differences are bigger and especially AR5008/AR9001 are configured to much more sensitive values than what is useful. Improve ANI behavior by reverting to the absolute values used in the previous implementation (expressed as a simple formula instead of the old table). Signed-off-by:
-
Felix Fietkau authored
The primary purpose of this piece of code was to selectively disable OFDM weak signal detection. The checks for this are elsewhere, and an earlier commit relaxed the restrictions for older chips, which are more sensitive to interference. Signed-off-by:
-
Arnd Bergmann authored
commit 4c59ff22 "wireless: Kconfig: add missing dependency" added a number of 'depends on CFG80211' statements, but missed the AIRO_CS driver that also causes the airo.c file to be built. This adds the (hopefully) last such missing statement Cc: "Zhao, Gang" <gamerh2o@gmail.com> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Emil Goode authored
The brcms_attach function is defined as static but the comment is saying that it should not be static or gcc will issue a warning. I believe we can remove the comment as I don't se a problem with this function being defined as static. Signed-off-by:
Emil Goode <emilgoode@gmail.com> Signed-off-by:
-
Emil Goode authored
When brcm80211 firmware is not installed networking hangs. A deadlock happens because we call ieee80211_unregister_hw() from the .start callback of struct ieee80211_ops. When .start is called we are under rtnl lock and ieee80211_unregister_hw() tries to take it again. Function call stack: dev_change_flags() __dev_change_flags() __dev_open() ASSERT_RTNL() <-- Assert rtnl lock ops->ndo_open() .ndo_open = ieee80211_open, ieee80211_open() ieee80211_do_open() drv_start() local->ops->start() .start = brcms_ops_start, brcms_ops_start() brcms_remove() ieee80211_unregister_hw() rtnl_lock() <-- Here we deadlock Introduced by: commit 25b5632f ("brcmsmac: request firmware in .start() callback") This patch fixes the bug by removing the call to brcms_remove() and moves the brcms_request_fw() call to the top of the .start callback to not initiate anything unless firmware is installed. Signed-off-by:
-
Felix Fietkau authored
Unify scnprintf calls and include the current OFDM/CCK immunity level. Signed-off-by:
-
Felix Fietkau authored
qi->tqi_readyTime is written directly to registers that expect microseconds as unit instead of TU. When setting the CABQ ready time, cur_conf->beacon_interval is in TU, so convert it to microseconds before passing it to ath9k_hw. This should hopefully fix some Tx DMA issues with buffered multicast frames in AP mode. Cc: stable@vger.kernel.org Signed-off-by:
-
Andrea Merello authored
Currently a "r8185" integer variable is used as a boolean flag to indicate whether the card is a rtl8185 or not. Since now the driver supports only rtl8185 and rtl8180 cards, if "r8185" variable is zero then the card is implicitly assumed to be a rtl8180. Now I'm preparing to add support for a third card type (rtl8187se). This patch changes the "r8185" flag with an enum variable to explicitly indicate which card type we have. I'm submitting this this patch now, even if I still have to submit other patches that not pertain with rtl8187se support, because IMHO it's not worth rebasing them on the current code, using r8185 flag, and then changing them back again nearly immediately. BTW if someone feels I really should do this, please tell me.. Signed-off-by:
Andrea Merello <andrea.merello@gmail.com> Signed-off-by:
-
Amitkumar Karwar authored
Currently AMPDU aggregation is preferred over AMSDU. AMSDU aggregation is performed only if AMPDU streams in firmware are full. This patch adds simultaneous AMSDU and AMPDU aggregation support. This mechanism helps to improve throughput. AMSDU is enabled only for 8897 chipsets which supports 4K transmit buffer. User can disable AMSDU using 'disable_tx_amsdu' module parameter. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
-
Amitkumar Karwar authored
Existing mwifiex_11n_dispatch_pkt() function is renamed as mwifiex_11n_dispatch_pkt_until_start_win() and a new function mwifiex_11n_dispatch_pkt() is created for a common code which dispatches single packet based on interface type. Signed-off-by:
-
Amitkumar Karwar authored
Use negative check for 'status' and return from the function. This improves readability by avoiding line splits. Also, local variable is used for start window calculations. Signed-off-by:
-
Amitkumar Karwar authored
As V15 firmware supports VHT rate configuration, we can use this information received in set bitrate mask handler. Signed-off-by:
-
Amitkumar Karwar authored
During Tx rate configuration, newer firmware V15 expects bitmap for VHT MCS rates as well. Signed-off-by:
-
Amitkumar Karwar authored
The firmware API version number will be used for future patches to support different firmware API specs. Signed-off-by:
-
Alexey Khoroshilov authored
If p54u_load_firmware() fails, p54u_probe() does not deallocate already allocated resources. The patch adds proper failure handling. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
-
-
- 13 Mar, 2014 4 commits
-
-
Larry Finger authored
Commit a619d1ab leads to the following static checker warning: drivers/net/wireless/rtlwifi/rtl8723be/phy.c:667 _rtl8723be_store_tx_power_by_rate() error: buffer overflow 'rtlphy->tx_power_by_rate_offset[band]' 4 <= 5 This warning arises because the code is testing the indices for the wrong maximum values. In addition, the tests merely putput a warning, and then procedes to corrupt memory. With this change, any such invalid memory access is avoided. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
John W. Linville authored
Commit 3ebe8e25 ("ieee80211: remove function ieee80211_{dsss_chan_to_freq, freq_to_dsss_chan}") removed ieee80211_dsss_chan_to_freq, but it neglected to account for this staging driver... Cc: Zhao, Gang <gamerh2o@gmail.com> Signed-off-by:
-
John W. Linville authored
Commit d8ca16db ("mac80211: add length check in ieee80211_is_robust_mgmt_frame()") changed that API to take an skb, and added "_ieee80211_is_robust_mgmt_frame" as a direct replacement for the older API. This is the same fix that was applied to the other rtlwifi drivers in that commit. Cc: Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
John W. Linville authored
This reverts commit 161d7855. Reversal of fortune -- I thought this was going to be resolved by other means, but that hasn't materialized. Plus, apparently we now care more than I realized about not breaking staging drivers... Signed-off-by:
-
- 11 Mar, 2014 1 commit
-
-
Emmanuel Grumbach authored
There is a flow in which we send the host command in SYNC mode, but we don't take priv->mutex. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1046495 Cc: <stable@vger.kernel.org> Reviewed-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
- 07 Mar, 2014 2 commits
-
-
Marek Puzyniak authored
Seems like we have an old bug, where we incidently overwrites the max_antenna_gain we pass to firmware, with zero value. End of all we are artifically reducing the output power. This patch removes the excessive assignment on max_antenna_gain, which is being provided by regulatory domain, and consequently improves the tx power. Signed-off-by:
Marek Puzyniak <marek.puzyniak@tieto.com> Signed-off-by:
Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com>
-
Ben Greear authored
Consolidate the list of msdu skbs into the msdu-head skb, delete the rest of the skbs, pass the msdu-head skb on up the stack as normal. Tested with high-speed TCP and UDP traffic on modified firmware that supports raw-rx. Signed-off-by:
Ben Greear <greearb@candelatech.com> Signed-off-by:
-
- 06 Mar, 2014 1 commit
-
-
Yogesh Ashok Powar authored
It fixes following sparse check warning >#make C=1 CF=-D__CHECK_ENDIAN__ drivers/net/wireless/mwl8k.o >drivers/net/wireless/mwl8k.c:3089:6: warning: symbol 'mwl8k_update_survey' was not declared. Should it be static? Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Nishant Sarmukadam <nishants@marvell.com> Signed-off-by:
Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by:
-
