Skip to content

L
linux
Switch branch/tag
  1. 22 Dec, 2020 30 commits
  3. 21 Dec, 2020 8 commits
    • Linus Torvalds's avatar
      Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux · 8653b778
      Linus Torvalds authored 
      Pull clk updates from Stephen Boyd:
 "The core framework got some nice improvements this time around. We
  gained the ability to get struct clk pointers from a struct clk_hw so
  that clk providers can consume the clks they provide, if they need to
  do something like that. This has been a long missing part of the clk
  provider API that will help us move away from exposing a struct clk
  pointer in the struct clk_hw. Tracepoints are added for the
  clk_set_rate() "range" functions, similar to the tracepoints we
  already have for clk_set_rate() and we added a column to debugfs to
  help developers understand the hardware enable state of clks in case
  firmware or bootloader state is different than what is expected.
  Overall the core changes are mostly improving the clk driver writing
  experience.

  At the driver level, we have the usual collection of driver updates
  and new drivers for new SoCs. This time around the Qualcomm folks
  introduced a good handful of clk drivers for various parts of three or
  four SoCs. The SiFive folks added a new clk driver for their FU740
  SoCs, coming in second on the diffstat and then Atmel AT91 and Amlogic
  SoCs had lots of work done after that for various new features. One
  last thing to note in the driver area is that the i.MX driver has
  gained a new binding to support SCU clks after being on the list for
  many months. It uses a two cell binding which is sort of rare in clk
  DT bindings. Beyond that we have the usual set of driver fixes and
  tweaks that come from more testing and finding out that some
  configuration was wrong or that a driver could support being built as
  a module.

  Summary:

  Core:
   - Add some trace points for clk_set_rate() "range" functions
   - Add hardware enable information to clk_summary debugfs
   - Replace clk-provider.h with of_clk.h when possible
   - Add devm variant of clk_notifier_register()
   - Add clk_hw_get_clk() to generate a struct clk from a struct clk_hw

  New Drivers:
   - Bindings for Canaan K210 SoC clks
   - Support for SiFive FU740 PRCI
   - Camera clks on Qualcomm SC7180 SoCs
   - GCC and RPMh clks on Qualcomm SDX55 SoCs
   - RPMh clks on Qualcomm SM8350 SoCs
   - LPASS clks on Qualcomm SM8250 SoCs

  Updates:
   - DVFS support for AT91 clk driver
   - Update git repo branch for Renesas clock drivers
   - Add camera (CSI) and video-in (VIN) clocks on Renesas R-Car V3U
   - Add RPC (QSPI/HyperFLASH) clocks on Renesas RZ/G2M, RZ/G2N, and RZ/G2E
   - Stop using __raw_*() I/O accessors in Renesas clk drivers
   - One more conversion of DT bindings to json-schema
   - Make i.MX clk-gate2 driver more flexible
   - New two cell binding for i.MX SCU clks
   - Drop of_match_ptr() in i.MX8 clk drivers
   - Add arch dependencies for Rockchip clk drivers
   - Fix i2s on Rockchip rk3066
   - Add MIPI DSI clks on Amlogic axg and g12 SoCs
   - Support modular builds of Amlogic clk drivers
   - Fix an Amlogic Video PLL clock dependency
   - Samsung Kconfig dependencies updates for better compile test coverage
   - Refactoring of the Samsung PLL clocks driver
   - Small Tegra driver cleanups
   - Minor fixes to Ingenic and VC5 clk drivers
   - Cleanup patches to remove unused variables and plug memory leaks"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits)
  dt-binding: clock: Document canaan,k210-clk bindings
  dt-bindings: Add Canaan vendor prefix
  clk: vc5: Use "idt,voltage-microvolt" instead of "idt,voltage-microvolts"
  clk: ingenic: Fix divider calculation with div tables
  clk: sunxi-ng: Make sure divider tables have sentinel
  clk: s2mps11: Fix a resource leak in error handling paths in the probe function
  clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9
  clk: si5351: Wait for bit clear after PLL reset
  clk: at91: sam9x60: remove atmel,osc-bypass support
  clk: at91: sama7g5: register cpu clock
  clk: at91: clk-master: re-factor master clock
  clk: at91: sama7g5: do not allow cpu pll to go higher than 1GHz
  clk: at91: sama7g5: decrease lower limit for MCK0 rate
  clk: at91: sama7g5: remove mck0 from parent list of other clocks
  clk: at91: clk-sam9x60-pll: allow runtime changes for pll
  clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristics
  clk: at91: clk-master: add 5th divisor for mck master
  clk: at91: sama7g5: allow SYS and CPU PLLs to be exported and referenced in DT
  dt-bindings: clock: at91: add sama7g5 pll defines
  clk: at91: sama7g5: fix compilation error
  ...
      8653b778
    • Linus Torvalds's avatar
      Merge tag 'm68knommu-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu · 8552d28e
      Linus Torvalds authored 
      Pull m68knommu updates from Greg Ungerer:

 - cleanup of 68328 code

 - align BSS section to 32bit

* tag 'm68knommu-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: m68328: remove duplicate code
  m68k: m68328: move platform code to separate files
  m68knommu: align BSS section to 4-byte boundaries
      8552d28e
    • Linus Torvalds's avatar
      Merge tag '9p-for-5.11-rc1' of git://github.com/martinetd/linux · 70990afa
      Linus Torvalds authored 
      Pull 9p update from Dominique Martinet:

 - fix long-standing limitation on open-unlink-fop pattern

 - add refcount to p9_fid (fixes the above and will allow for more
   cleanups and simplifications in the future)

* tag '9p-for-5.11-rc1' of git://github.com/martinetd/linux:
  9p: Remove unnecessary IS_ERR() check
  9p: Uninitialized variable in v9fs_writeback_fid()
  9p: Fix writeback fid incorrectly being attached to dentry
  9p: apply review requests for fid refcounting
  9p: add refcount to p9_fid struct
  fs/9p: search open fids first
  fs/9p: track open fids
  fs/9p: fix create-unlink-getattr idiom
      70990afa
    • Stephen Boyd's avatar
      Merge branches 'clk-ingenic', 'clk-vc5', 'clk-cleanup', 'clk-canaan' and... · abe7e32f
      Stephen Boyd authored 
      Merge branches 'clk-ingenic', 'clk-vc5', 'clk-cleanup', 'clk-canaan' and 'clk-marvell' into clk-next

 - Bindings for Canaan K210 SoC clks

* clk-ingenic:
  clk: ingenic: Fix divider calculation with div tables

* clk-vc5:
  clk: vc5: Use "idt,voltage-microvolt" instead of "idt,voltage-microvolts"

* clk-cleanup:
  clk: sunxi-ng: Make sure divider tables have sentinel
  clk: s2mps11: Fix a resource leak in error handling paths in the probe function
  clk: bcm: dvp: Add MODULE_DEVICE_TABLE()
  clk: bcm: dvp: drop a variable that is assigned to only

* clk-canaan:
  dt-binding: clock: Document canaan,k210-clk bindings
  dt-bindings: Add Canaan vendor prefix

* clk-marvell:
  clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9
      abe7e32f
    • Stephen Boyd's avatar
      Merge branches 'clk-ti', 'clk-analog', 'clk-trace', 'clk-at91' and 'clk-silabs' into clk-next · b53a1603
      Stephen Boyd authored 
       - Add some trace points for clk_set_rate() "range" functions
 - DVFS support for AT91 clk driver

* clk-ti:
  clk: ti: omap5: Fix reboot DPLL lock failure when using ABE TIMERs
  clk: ti: Fix memleak in ti_fapll_synth_setup

* clk-analog:
  clk: axi-clkgen: move the OF table at the bottom of the file
  clk: axi-clkgen: wrap limits in a struct and keep copy on the state object
  dt-bindings: clock: adi,axi-clkgen: convert old binding to yaml format

* clk-trace:
  clk: Trace clk_set_rate() "range" functions

* clk-at91:
  clk: at91: sam9x60: remove atmel,osc-bypass support
  clk: at91: sama7g5: register cpu clock
  clk: at91: clk-master: re-factor master clock
  clk: at91: sama7g5: do not allow cpu pll to go higher than 1GHz
  clk: at91: sama7g5: decrease lower limit for MCK0 rate
  clk: at91: sama7g5: remove mck0 from parent list of other clocks
  clk: at91: clk-sam9x60-pll: allow runtime changes for pll
  clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristics
  clk: at91: clk-master: add 5th divisor for mck master
  clk: at91: sama7g5: allow SYS and CPU PLLs to be exported and referenced in DT
  dt-bindings: clock: at91: add sama7g5 pll defines
  clk: at91: sama7g5: fix compilation error

* clk-silabs:
  clk: si5351: Wait for bit clear after PLL reset
      b53a1603
    • Stephen Boyd's avatar
      Merge branches 'clk-tegra', 'clk-imx', 'clk-sifive', 'clk-mediatek' and 'clk-summary' into clk-next · 699eda28
      Stephen Boyd authored 
       - Support for SiFive FU740 PRCI
 - Add hardware enable information to clk_summary debugfs

* clk-tegra:
  clk: tegra: Fix duplicated SE clock entry
  clk: tegra: bpmp: Clamp clock rates on requests
  clk: tegra: Do not return 0 on failure

* clk-imx: (24 commits)
  clk: imx: scu: remove the calling of device_is_bound
  clk: imx: scu: Make pd_np with static keyword
  clk: imx8mq: drop of_match_ptr from of_device_id table
  clk: imx8mp: drop of_match_ptr from of_device_id table
  clk: imx8mn: drop of_match_ptr from of_device_id table
  clk: imx8mm: drop of_match_ptr from of_device_id table
  clk: imx: gate2: Remove unused variable ret
  clk: imx: gate2: Add locking in is_enabled op
  clk: imx: gate2: Add cgr_mask for more flexible number of control bits
  clk: imx: gate2: Check if clock is enabled against cgr_val
  clk: imx: gate2: Keep the register writing in on place
  clk: imx: gate2: Remove the IMX_CLK_GATE2_SINGLE_BIT special case
  clk: imx: scu: fix build break when compiled as modules
  clk: imx: remove redundant assignment to pointer np
  clk: imx: remove unneeded semicolon
  clk: imx: lpcg: add suspend/resume support
  clk: imx: clk-imx8qxp-lpcg: add runtime pm support
  clk: imx: lpcg: allow lpcg clk to take device pointer
  clk: imx: imx8qxp-lpcg: add parsing clocks from device tree
  clk: imx: scu: add suspend/resume support
  ...

* clk-sifive:
  clk: sifive: Add clock enable and disable ops
  clk: sifive: Fix the wrong bit field shift
  clk: sifive: Add a driver for the SiFive FU740 PRCI IP block
  clk: sifive: Use common name for prci configuration
  clk: sifive: Extract prci core to common base
  dt-bindings: fu740: prci: add YAML documentation for the FU740 PRCI

* clk-mediatek:
  clk: mediatek: Make mtk_clk_register_mux() a static function

* clk-summary:
  clk: Add hardware-enable column to clk summary
      699eda28
    • Stephen Boyd's avatar
      Merge branches 'clk-amlogic', 'clk-rockchip', 'clk-of', 'clk-freescale' and... · d240d4c2
      Stephen Boyd authored 
      Merge branches 'clk-amlogic', 'clk-rockchip', 'clk-of', 'clk-freescale' and 'clk-unused' into clk-next

 - Replace clk-provider.h with of_clk.h when possible

* clk-amlogic:
  clk: meson: g12a: add MIPI DSI Host Pixel Clock
  dt-bindings: clk: g12a-clkc: add DSI Pixel clock bindings
  clk: meson: enable building as modules
  clk: meson: Kconfig: fix dependency for G12A
  clk: meson: axg: add MIPI DSI Host clock
  clk: meson: axg: add Video Clocks
  dt-bindings: clk: axg-clkc: add MIPI DSI Host clock binding
  dt-bindings: clk: axg-clkc: add Video Clocks

* clk-rockchip:
  clk: rockchip: fix i2s gate bits on rk3066 and rk3188
  clk: rockchip: add CLK_SET_RATE_PARENT to sclk for rk3066a i2s and uart clocks
  clk: rockchip: Remove redundant null check before clk_prepare_enable
  clk: rockchip: Add appropriate arch dependencies

* clk-of:
  xtensa: Replace <linux/clk-provider.h> by <linux/of_clk.h>
  sh: boards: Replace <linux/clk-provider.h> by <linux/of_clk.h>

* clk-freescale:
  clk: fsl-flexspi: new driver
  dt-bindings: clock: document the fsl-flexspi-clk device
  clk: divider: add devm_clk_hw_register_divider_table()
  clk: qoriq: provide constants for the type
  clk: fsl-sai: use devm_clk_hw_register_composite_pdata()
  clk: composite: add devm_clk_hw_register_composite_pdata()
  clk: fsl-sai: fix memory leak
  clk: qoriq: Add platform dependencies

* clk-unused:
  clk: scpi: mark scpi_clk_match as maybe unused
  clk: pwm: drop of_match_ptr from of_device_id table
      d240d4c2
    • Stephen Boyd's avatar
      Merge branches 'clk-doc', 'clk-qcom', 'clk-simplify', 'clk-hw', 'clk-renesas'... · 23cae54f
      Stephen Boyd authored 
      Merge branches 'clk-doc', 'clk-qcom', 'clk-simplify', 'clk-hw', 'clk-renesas' and 'clk-samsung' into clk-next

 - Camera clks on Qualcomm SC7180 SoCs
 - GCC and RPMh clks on Qualcomm SDX55 SoCs
 - RPMh clks on Qualcomm SM8350 SoCs
 - LPASS clks on Qualcomm SM8250 SoCs
 - Add devm variant of clk_notifier_register()
 - Add clk_hw_get_clk() to generate a struct clk from a struct clk_hw

* clk-doc:
  clk: fix a kernel-doc markup

* clk-qcom: (27 commits)
  clk: qcom: rpmh: add support for SM8350 rpmh clocks
  dt-bindings: clock: Add RPMHCC bindings for SM8350
  clk: qcom: lpasscc: Introduce pm autosuspend for SC7180
  clk: qcom: gcc-sc7180: Add 50 MHz clock rate for SDC2
  clk: qcom: gcc-sc7180: Use floor ops for sdcc clks
  clk: qcom: Add GDSC support for SDX55 GCC
  dt-bindings: clock: Add GDSC in SDX55 GCC
  clk: qcom: Add support for SDX55 RPMh clocks
  dt-bindings: clock: Introduce RPMHCC bindings for SDX55
  clk: qcom: Add SDX55 GCC support
  dt-bindings: clock: Add SDX55 GCC clock bindings
  clk: qcom: Kconfig: Fix spelling mistake "dyanmic" -> "dynamic"
  clk: qcom: rpmh: Add CE clock on sdm845.
  dt-bindings: clock: Add entry for crypto engine RPMH clock resource
  clk: qcom: dispcc-sm8250: handle MMCX power domain
  clk: qcom: camcc-sc7180: Use runtime PM ops instead of clk ones
  clk: qcom: lpass-sc7180: Clean up on error in lpass_sc7180_init()
  clk: qcom: Add support to LPASS AON_CC Glitch Free Mux clocks
  clk: qcom: Add support to LPASS AUDIO_CC Glitch Free Mux clocks
  dt-bindings: clock: Add support for LPASS Always ON Controller
  ...

* clk-simplify:
  clk: remove unneeded dead-store initialization

* clk-hw:
  clk: meson: g12: use devm variant to register notifiers
  clk: add devm variant of clk_notifier_register
  clk: meson: g12: drop use of __clk_lookup()
  clk: add api to get clk consumer from clk_hw
  clk: avoid devm_clk_release name clash

* clk-renesas:
  dt-bindings: clock: renesas: rcar-usb2-clock-sel: Convert bindings to json-schema
  clk: renesas: sh73a0: Stop using __raw_*() I/O accessors
  clk: renesas: r8a774c0: Add RPC clocks
  clk: renesas: r8a779a0: Fix R and OSC clocks
  clk: renesas: cpg-mssr: fix kerneldoc of cpg_mssr_priv
  clk: renesas: rcar-usb2-clock-sel: Replace devm_reset_control_array_get()
  clk: renesas: r8a774b1: Add RPC clocks
  clk: renesas: r8a774a1: Add RPC clocks
  clk: renesas: r8a779a0: Add VIN clocks
  clk: renesas: r8a779a0: Add CSI4[0-3] clocks
  MAINTAINERS: Update git repo for Renesas clock drivers
  clk: renesas: r8a779a0: Make rcar_r8a779a0_cpg_clk_register() static
  clk: renesas: rcar-gen3: Remove stp_ck handling for SDHI

* clk-samsung:
  clk: samsung: Prevent potential endless loop in the PLL ops
  clk: samsung: Allow compile testing of Exynos, S3C64xx and S5Pv210
      23cae54f
  5. 20 Dec, 2020 2 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7