- 22 Jan, 2018 10 commits
-
-
Ganesh Goudar authored
Add geneve segmentation offload support of T6 cards. Original work by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'mac80211-next-for-davem-2018-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Less than a handful of changes: * possible memory leak fix in hwsim * speed up hwsim * add hwsim userspace rate control API * code cleanups ==================== A conflict was resolved in mac80211_hwsim.c, mostly of the simple overlapping changes category. One adding a rhashtable and another adding a workqueue. Signed-off-by:
-
Colin Ian King authored
Currently, if the call to devlink_resource_find returns null then the error exit path does not free the devlink_resource 'resource' and a memory leak occurs. Fix this by kfree'ing resource on the error exit path. Detected by CoverityScan, CID#1464184 ("Resource leak") Fixes: d9f9b9a4 ("devlink: Add support for resource abstraction") Signed-off-by:Colin Ian King <colin.king@canonical.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: spectrum_router: Optimize LPM trees Ido says: This set tries to optimize the structure of the LPM trees used for route lookup by avoiding lookups that are guaranteed not to return a result. This is done by making sure only used prefix lengths are present in the tree. First two patches are small preparatory steps towards the actual change in the last patch. ==================== Signed-off-by: -
Ido Schimmel authored
In commit fc922bb0 ("mlxsw: spectrum_router: Use one LPM tree for all virtual routers") I tried to make sure only used prefix lengths are present in the LPM tree shared between all virtual routers. However, this optimization had to be removed in commit a69518cf ("mlxsw: spectrum_router: Avoid expensive lookup during route removal"), since determining the used prefix lengths required us to traverse all the active virtual routers, which could result in a hung task depending on the number of VRFs and whether routes were removed due to abort or not. Re-introduce the optimization by moving the prefix usage accounting from the virtual routers to the LPM tree, as this accounting is only used in order to determine the tree's structure. To make the sharing of the trees more explicit, the two trees (for IPv4 and IPv6) are stored in the shared router struct and upon the creation of a virtual router it is immediately bound to both. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
Next patch will try to optimize the LPM tree and make sure only used prefix lengths are present, to avoid unnecessary look-ups. Pass the currently removed FIB node to the unlinking function as its associated prefix length is a potential candidate for removal from the tree. Signed-off-by:
-
Ido Schimmel authored
Currently, each FIB (IPv4 / IPv6) in a virtual router holds a prefix usage that is used to choose a matching LPM tree, but also to check if the FIB is empty, so that the LPM tree could be unbound. Next patches will remove the reliance on the per-FIB prefix usage for LPM tree matching. Keeping it only to check if the FIB is empty is a waste, since we can use the nodes ({Prefix, Length}) list instead. Signed-off-by: -
Jason Wang authored
This patch fixes the following sparse warnings: drivers/net/tun.c:2241:15: error: incompatible types in comparison expression (different address spaces) Fixes: cd5681d7 ("tuntap: rename struct tun_steering_prog to struct tun_prog") Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
weiyongjun (A) authored
'hwname' is malloced in hwsim_new_radio_nl() and should be freed before leaving from the error handling cases, otherwise it will cause memory leak. Fixes: ff4dd73d ("mac80211_hwsim: check HWSIM_ATTR_RADIO_NAME length") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Christopher Díaz Riveros authored
Trivial fix removes unneeded semicolons after switch blocks. Signed-off-by:
Christopher Díaz Riveros <chrisadr@gentoo.org> Signed-off-by:
-
- 21 Jan, 2018 25 commits
-
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: Add support for mirror action with flower Arkadi says: Add support for mirror action with flower classifier. The first 3 patches introduce a generic per-block resource infra. The last 4 patches add support for flow based span. ==================== Signed-off-by: -
Arkadi Sharshevsky authored
Add support for mirror action. Only one mirror action can be set per rule. Signed-off-by:
Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by:
-
Arkadi Sharshevsky authored
Introduce extension of mlxsw_afa_ops in order to add/del mirroring and implement the ops for Spectrum. Signed-off-by:
-
Arkadi Sharshevsky authored
Extend SPAN API for ACL case. In case of ACL triggering the MPAR register shouldn't be configured. This patch also export those helpers for ACL usage. Signed-off-by:
-
Arkadi Sharshevsky authored
The patch extends the trap action for mirroring. Signed-off-by:
-
Jiri Pirko authored
So far, the caller of mlxsw_afa_block_append_counter needed to allocate counter index by hand. Benefit from the previously introduced resource infra and counter_index_get/put callbacks, and allocate the counter index in place where it is needed, inside the action append function. Signed-off-by:
-
Jiri Pirko authored
Since the resource list needs to be used also for other entries different to fwd_entry_ref, make the list generic. For that purpose, introduce a resource structure with couple of helpers that the code which need to store a per-block resource should use. Signed-off-by:
-
Jiri Pirko authored
Introduce extension of mlxsw_afa_ops in order to get/put counter indexes and implement the ops for Spectrum. Signed-off-by:
-
David S. Miller authored
Igor Russkikh says: ==================== Aquantia atlantic driver new devices support This patchset introduces a support for new Aquantia hardware: AQC11x family with updated hardware (B1) and firmware (2.x and 3.x branches). For that, a number of improvements in overall driver model were done: - Firmware specific ops tables. Firmware 2.x and 3.x series support functions are now in separate fw2x module. - PCI module cleanup and simplification done. - Verified and tested hardware reset process. ==================== Signed-off-by: -
Igor Russkikh authored
Signed-off-by:
Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by:
-
Igor Russkikh authored
For devices with known capabilities of Fibre media type we now report that to ethtool. Signed-off-by:
-
Igor Russkikh authored
The detailed reset sequence ensures all HW components are in aligned state before NIC startup. It also supports cards with signed firmware (RBL) and checks if their FW is valid. Signed-off-by:
-
Igor Russkikh authored
This defines fw2x operations table and corresponding methods. Some of the functions are being shared with 1.x firmware Signed-off-by:
-
Igor Russkikh authored
New AQC cards will have an updated firmware with new binary interface. This patch extracts firmware specific operations into a separate table and prepares for the introduction of new fw 2.x and 3.x Signed-off-by:
-
Igor Russkikh authored
The address to check if HW is not dead/hang could be stored in capabilities, since it is a constant. Change its name to better reflect the idea. Signed-off-by:
-
Igor Russkikh authored
These ops are not related to HW and are now implemented in pci module. Thus, remove these ops pointers and implementation. Signed-off-by:
-
Igor Russkikh authored
Driver contained a dead code of maintaining multiple pci port instances. That will never be used since for each pci function a separate NIC instance is created. Simplify this, making pci module only responsible for pci resource management. NIC initialization is also simplified accordingly. Signed-off-by:
-
Igor Russkikh authored
This removes unnecessary structure copying, and prepares the driver for separate firmware ops table introduction. We also remove extra copy of capabilities structure (which is const actually) and also replace it with a const pointer in aq_nic_cfg. Signed-off-by:
-
Igor Russkikh authored
A number of new AQC devices is going to be released. To support more flexible capabilities management a number of static caps instances is now declared. Devices now are mainly differs by supported speeds, but in future more parameters will be customized. A set of AQC100 devices have fibre media, not twisted pair - this is also reflected in new capabilities definitions. HW level also now directly exports hw_ops for each of A0/B0 hardware. PCI configuration now uses a device configuration table where each device ID is explicitly mapped with hardware OPs and capabilities structures. Signed-off-by:
-
Igor Russkikh authored
New set of aquantia devices has an upgraded hardware (B1). The hardware interface is identical to B0. The difference will be in firmware which is incompatible with old one. Reorganized and removed duplicate speed and devid definitions Introduced explicit flow control configuration defines Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-updates-2018-01-19 From: Or Gerlitz <ogerlitz@mellanox.com> ======= First six patches of this series further enhances the mlx5 hairpin support. The first two patches deal with using different hairpin instances for flows whose packets have different priorities to align with the port TX QoS model. The next four patches allow us to do HW spreading of flows over a set of hairpin pairs using RSS. The last two patches change the driver to also set the size of the HW hairpin queues. ======== Next four patches from Eran Ben Elisha <eranbe@mellanox.com>: Add more debug data for TX timeout handling, and further enhance and optimize TX timeout handling upon lost interrupts, which adds a mechanism for explicitly polling EQ in case of a TX timeout in order to recover from a lost interrupt. If this is not the case (no pending EQEs), perform a channels full recovery as usual. From Kamal Heib <kamalh@mellanox.com>, Two patches to extend the stats group API to have an update_stats() callback which will be used to fetch the hardware or software counters data, this will improve the current API and reduce code duplication. From Gal Pressman <galp@mellanox.com>, Last patch, Add likely to the common RX checksum flow. ==================== Signed-off-by: -
Pieter Jansen van Vuuren authored
Previously it was possible to interrupt processing stats updates because they were handled in a work queue. Interrupting the stats updates could lead to a situation where we backup the control message queue. This patch moves the stats update processing out of the work queue to be processed as soon as hardware sends a request. Reported-by:
Louis Peens <louis.peens@netronome.com> Signed-off-by:
Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by:
Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Linus Walleij authored
The zeroday builder notices that since Usermode Linux does not have IO memory, the build fails for them when selecting everything it can enable. As the driver is clearly using memory-mapped registers to access the network adapter, we add depends on HAS_IOMEM to solve this problem. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for your net-next tree. Basically, a new extension for ip6tables, simplification work of nf_tables that saves us 500 LoC, allow raw table registration before defragmentation, conversion of the SNMP helper to use the ASN.1 code generator, unique 64-bit handle for all nf_tables objects and fixes to address fallout from previous nf-next batch. More specifically, they are: 1) Seven patches to remove family abstraction layer (struct nft_af_info) in nf_tables, this simplifies our codebase and it saves us 64 bytes per net namespace. 2) Add IPv6 segment routing header matching for ip6tables, from Ahmed Abdelsalam. 3) Allow to register iptable_raw table before defragmentation, some people do not want to waste cycles on defragmenting traffic that is going to be dropped, hence add a new module parameter to enable this behaviour in iptables and ip6tables. From Subash Abhinov Kasiviswanathan. This patch needed a couple of follow up patches to get things tidy from Arnd Bergmann. 4) SNMP helper uses the ASN.1 code generator, from Taehee Yoo. Several patches for this helper to prepare this change are also part of this patch series. 5) Add 64-bit handles to uniquely objects in nf_tables, from Harsha Sharma. 6) Remove log message that several netfilter subsystems print at boot/load time. 7) Restore x_tables module autoloading, that got broken in a previous patch to allow singleton NAT hook callback registration per hook spot, from Florian Westphal. Moreover, return EBUSY to report that the singleton NAT hook slot is already in instead. 8) Several fixes for the new nf_tables flowtable representation, including incorrect error check after nf_tables_flowtable_lookup(), missing Kconfig dependencies that lead to build breakage and missing initialization of priority and hooknum in flowtable object. 9) Missing NETFILTER_FAMILY_ARP dependency in Kconfig for the clusterip target. This is due to recent updates in the core to shrink the hook array size and compile it out if no specific family is enabled via .config file. Patch from Florian Westphal. 10) Remove duplicated include header files, from Wei Yongjun. 11) Sparse warning fix for the NFPROTO_INET handling from the core due to missing static function definition, also from Wei Yongjun. 12) Restore ICMPv6 Parameter Problem error reporting when defragmentation fails, from Subash Abhinov Kasiviswanathan. 13) Remove obsolete owner field initialization from struct file_operations, patch from Alexey Dobriyan. 14) Use boolean datatype where needed in the Netfilter codebase, from Gustavo A. R. Silva. 15) Remove double semicolon in dynset nf_tables expression, from Luis de Bethencourt. ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf-next 2018-01-19 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) bpf array map HW offload, from Jakub. 2) support for bpf_get_next_key() for LPM map, from Yonghong. 3) test_verifier now runs loaded programs, from Alexei. 4) xdp cpumap monitoring, from Jesper. 5) variety of tests, cleanups and small x64 JIT optimization, from Daniel. 6) user space can now retrieve HW JITed program, from Jiong. Note there is a minor conflict between Russell's arm32 JIT fixes and removal of bpf_jit_enable variable by Daniel which should be resolved by keeping Russell's comment and removing that variable. ==================== Signed-off-by:
-
- 20 Jan, 2018 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
The BPF verifier conflict was some minor contextual issue. The TUN conflict was less trivial. Cong Wang fixed a memory leak of tfile->tx_array in 'net'. This is an skb_array. But meanwhile in net-next tun changed tfile->tx_arry into tfile->tx_ring which is a ptr_ring. Signed-off-by: -
Alexei Starovoitov authored
Daniel Borkmann says: ==================== This series adds various misc improvements to BPF: detection of BPF helper definition misconfiguration for mem/size argument pairs, csum_diff helper also for XDP, various test cases, removal of the recently added pure_initcall(), restriction of the jit sysctls to cap_sys_admin for initns, a minor size improvement for x86 jit in alu ops, output of complexity limit to verifier log and last but not least having the event output more flexible with moving to const_size_or_zero type. Thanks! ==================== Signed-off-by:Alexei Starovoitov <ast@kernel.org>
-
Daniel Borkmann authored
Similar rationale as in a60dd35d ("bpf: change bpf_perf_event_output arg5 type to ARG_CONST_SIZE_OR_ZERO"), change the type to CONST_SIZE_OR_ZERO such that we can better deal with optimized code. No changes needed in bpf_event_output() as it can also deal with 0 size entirely (e.g. as only wake-up signal with empty frame in perf RB, or packet dumps w/o meta data as another such possibility). Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
-
Daniel Borkmann authored
Given the limit could potentially get further adjustments in the future, add it to the log so it becomes obvious what the current limit is w/o having to check the source first. This may also be helpful for debugging complexity related issues on kernels that backport from upstream. Signed-off-by:
-
Daniel Borkmann authored
For the BPF_REG_0 (BPF_REG_A in cBPF, respectively), we can use the short form of the opcode as dst mapping is on eax/rax and thus save a byte per such operation. Added to add/sub/and/or/xor for 32/64 bit when K immediate is used. There may be more such low-hanging fruit to add in future as well. Signed-off-by:
-
