- 02 Aug, 2023 40 commits
-
-
Ruan Jinjie authored
There are a little ternary operators, the true or false judgement of which is unnecessary in C language semantics. So remove it to clean Code. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Sunil Goutham <sgoutham@marvell.com> Link: https://lore.kernel.org/r/20230801112638.317149-1-ruanjinjie@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Ruan Jinjie authored
net: hisilicon: fix the return value handle and remove redundant netdev_err() for platform_get_irq() There is no possible for platform_get_irq() to return 0 and the return value of platform_get_irq() is more sensible to show the error reason. And there is no need to call the netdev_err() function directly to print a custom message when handling an error from platform_get_irq() function as it is going to display an appropriate error message in case of a failure. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/20230731073858.3633193-1-ruanjinjie@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Yang Li authored
./drivers/net/ethernet/freescale/fman/mac.c: linux/of_platform.h is included more than once. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6039Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Willem de Bruijn authored
tcp_mmap tests TCP_ZEROCOPY_RECEIVE. If 0% of data is received using mmap, this may be due to mss. Report rcv_mss to identify this cause. Output of a run failed due to too small mss: received 32768 MB (0 % mmap'ed) in 8.40458 s, 32.7057 Gbit cpu usage user:0.027922 sys:8.21126, 251.44 usec per MB, 3252 c-switches, rcv_mss 1428 Output on a successful run: received 32768 MB (99.9507 % mmap'ed) in 4.69023 s, 58.6064 Gbit cpu usage user:0.029172 sys:2.56105, 79.0473 usec per MB, 57591 c-switches, rcv_mss 4096 Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
MD Danish Anwar says: ==================== Introduce ICSSG based ethernet Driver The Programmable Real-time Unit and Industrial Communication Subsystem Gigabit (PRU_ICSSG) is a low-latency microcontroller subsystem in the TI SoCs. This subsystem is provided for the use cases like the implementation of custom peripheral interfaces, offloading of tasks from the other processor cores of the SoC, etc. The subsystem includes many accelerators for data processing like multiplier and multiplier-accumulator. It also has peripherals like UART, MII/RGMII, MDIO, etc. Every ICSSG core includes two 32-bit load/store RISC CPU cores called PRUs. The above features allow it to be used for implementing custom firmware based peripherals like ethernet. This series adds the YAML documentation and the driver with basic EMAC support for TI AM654 Silicon Rev 2 SoC with the PRU_ICSSG Sub-system. running dual-EMAC firmware. This currently supports basic EMAC with 1Gbps and 100Mbps link. 10M and half-duplex modes are not yet supported because they require the support of an IEP, which will be added later. Advanced features like switch-dev and timestamping will be added later. This is the v13 of the patch series [v1]. This version of the patchset addresses comments made on v12. There series doesn't have any dependency. Changes from v12 to v13 : *) Rebased the series on latest net-next. *) Addressed Jakub's comments on ndo_xmit API. Now we will only stop queues based on occupancy not on dma errors. *) Removed limiting the number of serviced packets to budget for Tx NAPI. Now Tx NAPI will keep servicing packets. *) Removed netif_running() check when packet arrives. *) Introduced prototypes of APIs in the same patch where these APIs are added. Dropped __maybe_unused tags as compiler only cares about prototypes existing, not whether actual callers are in place. Now prototypes of these APIs are present in the same patch where they are introduced but thes APIs are called later (in patch 6). Changes from v11 to v12 : *) Rebased the series on latest net-next. *) Addressed Jakub's comments on ndo_xmit API. *) Added hooks to .get_rmon_stats for the driver. Now tx / rx bucket size and frame counts per bucket will be fetched by ethtool_rmon_stats instead of ethtool -S. *) Added __maybe_unused tags to unused config and classifier APIs in patch 2,3 and 4. These tags are later removed in patch 6. Changes from v10 to v11 : *) Rebased the series on latest net-next. *) Split the ICSSG driver introduction patch into 9 different patches as asked by Jakub. *) Introduced new patch(patch 8/10) to dump Standard network interface staticstics via ndo_get_stats64. Now certain stats that are reported by ICSSG hardware and are also part of struct rtnl_link_stats64, will be reported by ndo_get_stats64. While other stats that are not part of the struct rtnl_link_stats64 will be reported by ethtool -S. These stats are not duplicated. Changes from v9 to v10 : *) Rebased the series on latest net-next. *) Moved 'ndev prueth->emac[mac] == emac' assignment to the end of function prueth_netdev_init(). *) In unsupported phy_mode switch case instead of returning -EINVAL, store the error code in ret and 'goto free' Changes from v8 to v9 : *) Rebased the series on latest net-next. *) Fixed smatch and sparse warnings as pointed by Simon. *) Fixed leaky ndev in prueth_netdev_init() as asked by Simon. Changes from v7 to v8 : *) Rebased the series on 6.5-rc1. *) Fixed few formattings. Changes from v6 to v7 : *) Added RB tag of Rob in patch 1 of this series. *) Addressed Simon's comment on patch 2 of the series. *) Rebased patchset on next-20230428 linux-next. Changes from v5 to v6 : *) Added RB tag of Andrew Lunn in patch 2 of this series. *) Addressed Rob's comment on patch 1 of the series. *) Rebased patchset on next-20230421 linux-next. Changes from v4 to v5 : *) Re-arranged properties section in ti,icssg-prueth.yaml file. *) Added requirement for minimum one ethernet port. *) Fixed some minor formatting errors as asked by Krzysztof. *) Dropped SGMII mode from enum mii_mode as SGMII mode is not currently supported by the driver. *) Added switch-case block to handle different phy modes by ICSSG driver. Changes from v3 to v4 : *) Addressed Krzysztof's comments and fixed dt_binding_check errors in patch 1/2. *) Added interrupt-extended property in ethernet-ports properties section. *) Fixed comments in file icssg_switch_map.h according to the Linux coding style in patch 2/2. Added Documentation of structures in patch 2/2. Changes from v2 to v3 : *) Addressed Rob and Krzysztof's comments on patch 1 of this series. Fixed indentation. Removed description and pinctrl section from ti,icssg-prueth.yaml file. *) Addressed Krzysztof, Paolo, Randy, Andrew and Christophe's comments on patch 2 of this seires. *) Fixed blanklines in Kconfig and Makefile. Changed structures to const as suggested by Krzysztof. *) Fixed while loop logic in emac_tx_complete_packets() API as suggested by Paolo. Previously in the loop's last iteration 'budget' was 0 and napi_consume_skb would wrongly assume the caller is not in NAPI context Now, budget won't be zero in last iteration of loop. *) Removed inline functions addr_to_da1() and addr_to_da0() as asked by Andrew. *) Added dev_err_probe() instead of dev_err() as suggested by Christophe. *) In ti,icssg-prueth.yaml file, in the patternProperties section of ethernet-ports, kept the port name as "port" instead of "ethernet-port" as all other drivers were using "port". Will change it if is compulsory to use "ethernet-port". ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
MD Danish Anwar authored
Add suspend / resume APIs to support power management in ICSSG ethernet driver. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
MD Danish Anwar authored
Add icssg_ethtool.c file. This file will be used for dumping statistics via ethtool for ICSSG ethernet driver. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
MD Danish Anwar authored
Implement .ndo_get_stats64 to dump standard network interface statistics for ICSSG ethernet driver. Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
MD Danish Anwar authored
Add icssg_stats.c to help dump, icssg related driver statistics. ICSSG has hardware registers for providing statistics like total rx bytes, total tx bytes, etc. These registers are of 32 bits and hence in case of 1G link, they overflows in around 32 seconds. The behaviour of these registers is such that they don't roll back to 0 after overflow but rather stay at UINT_MAX. These registers support a feature where the value written to them is subtracted from the register. This feature can be utilized to fix the overflowing of stats. This solution uses a Workqueues based solution where a function gets called before the registers overflow (every 25 seconds in 1G link, 25000 seconds in 100M link), this function saves the register values in local variables and writes the last read value to the register. So any update during the read will be taken care of. Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Roger Quadros authored
This is the Ethernet driver for TI AM654 Silicon rev. 2 with the ICSSG PRU Sub-system running dual-EMAC firmware. The Programmable Real-time Unit and Industrial Communication Subsystem Gigabit (PRU_ICSSG) is a low-latency microcontroller subsystem in the TI SoCs. This subsystem is provided for the use cases like implementation of custom peripheral interfaces, offloading of tasks from the other processor cores of the SoC, etc. Every ICSSG core has two Programmable Real-Time Unit(PRUs), two auxiliary Real-Time Transfer Unit (RT_PRUs), and two Transmit Real-Time Transfer Units (TX_PRUs). Each one of these runs its own firmware. Every ICSSG core has two MII ports connect to these PRUs and also a MDIO port. The cores can run different firmwares to support different protocols and features like switch-dev, timestamping, etc. It uses System DMA to transfer and receive packets and shared memory register emulation between the firmware and driver for control and configuration. This patch adds support for basic EMAC functionality with 1Gbps and 100Mbps link speed. 10M and half duplex mode are not supported currently as they require IEP, the support for which will be added later. Support for switch-dev, timestamp, etc. will be added later by subsequent patch series. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
MD Danish Anwar authored
Add a YAML binding document for the ICSSG Programmable real time unit based Ethernet hardware. The ICSSG driver uses the PRU and PRUSS consumer APIs to interface the PRUs and load/run the firmware for supporting ethernet functionality. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
MD Danish Anwar authored
Add icssg_queue.c file. This file introduces macros and APIs related to ICSSG queues. These will be used by ICSSG Ethernet driver. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
MD Danish Anwar authored
Add icssg_config.h / .c and icssg_classifier.c files. These are firmware configuration and classification related files. These will be used by ICSSG ethernet driver. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
MD Danish Anwar authored
Add MII helper APIs and MACROs. These APIs and MACROs will be later used by ICSSG Ethernet driver. Also introduce icssg_prueth.h which has definition of prueth related structures. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
MD Danish Anwar authored
Add firmware interface related headers and macros for ICSSG Ethernet driver. These macros will be later used by the ICSSG ethernet driver. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ante Knezic authored
Fixes XAUI/RXAUI lane alignment errors. Issue causes dropped packets when trying to communicate over fiber via SERDES lanes of port 9 and 10. Errata document applies only to 88E6190X and 88E6390X devices. Requires poking in undocumented registers. Signed-off-by: Ante Knezic <ante.knezic@helmholz.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ratheesh Kannoth says: ==================== Packet classify by matching against SPI 1. net: flow_dissector: Add IPSEC dissector. Flow dissector patch reads IPSEC headers (ESP or AH) header from packet and retrieves the SPI header. 2. tc: flower: support for SPI. TC control path changes to pass SPI field from userspace to kernel. 3. tc: flower: Enable offload support IPSEC SPI field. Next patch enables the HW support for classify offload for ESP/AH. This patch enables the HW offload control. 4. octeontx2-pf: TC flower offload support for SPI field. HW offload support for classification in octeontx2 driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ratheesh Kannoth authored
Driver support to offload TC flower rules which matches against SPI field of IPSEC packets (AH/ESP). Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ratheesh Kannoth authored
This patch enables offload for TC classifier flower rules which matches against SPI field. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ratheesh Kannoth authored
tc flower rules support to classify ESP/AH packets matching SPI field. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ratheesh Kannoth authored
Support for dissecting IPSEC field SPI (which is 32bits in size) for ESP and AH packets. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Neil Armstrong says: ==================== net: ethernet: dwmac: oxnas glue removal With [1] removing MPCore SMP support, this makes the OX820 barely usable, associated with a clear lack of maintainance, development and migration to dt-schema it's clear that Linux support for OX810 and OX820 should be removed. In addition, the OX810 hasn't been booted for years and isn't even present in an ARM config file. For the OX820, lack of USB and SATA support makes the platform not usable in the current Linux support and relies on off-tree drivers hacked from the vendor (defunct for years) sources. The last users are in the OpenWRT distribution, and today's removal means support will still be in stable 6.1 LTS kernel until end of 2026. If someone wants to take over the development even with lack of SMP, I'll be happy to hand off maintainance. It has been a fun time adding support for this architecture, but it's time to get over! This patchset only removes net changes, and is derived from: https://lore.kernel.org/r/20230630-topic-oxnas-upstream-remove-v2-0-fb6ab3dea87c@linaro.org --- Changes in v3: - Removed applied changes - Added Andy's tags - Reduced for net - Link to v2: https://lore.kernel.org/r/20230630-topic-oxnas-upstream-remove-v2-0-fb6ab3dea87c@linaro.org Changes in v2: - s/maintainance/maintenance/ - added acked/review tags - dropped already applied patches - drop RFC - Link to v1: https://lore.kernel.org/r/20230331-topic-oxnas-upstream-remove-v1-0-5bd58fd1dd1f@linaro.org ==================== Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Neil Armstrong authored
Due to lack of maintenance and stall of development for a few years now, and since no new features will ever be added upstream, remove the OX810 and OX820 dwmac glue. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Neil Armstrong authored
Due to lack of maintenance and stall of development for a few years now, and since no new features will ever be added upstream, remove support for OX810 and OX820 ethernet. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Petr Machata says: ==================== selftests: New selftests for out-of-order-operations patches in mlxsw In the past, the mlxsw driver made the assumption that the user applies configuration in a bottom-up manner. Thus netdevices needed to be added to the bridge before IP addresses were configured on that bridge or SVI added on top of it, because whatever happened before a netdevice was mlxsw upper was generally ignored by mlxsw. Recently, several patch series were pushed to introduce the bookkeeping and replays necessary to offload the full state, not just the immediate configuration step. In this patchset, introduce new selftests that directly exercise the out of order code paths in mlxsw. - Patch #1 adds new tests into the existing selftest router_bridge.sh. - Patches #2-#5 add new generic selftests. - Patches #6-#8 add new mlxsw-specific selftests. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Machata authored
This test verifies driver behavior with regards to creation of RIFs for a bridge as LAGs are added or removed to/from it, and ports added or removed to/from the LAG. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Machata authored
This test verifies driver behavior with regards to creation of RIFs for LAG VLAN uppers as ports are added or removed to/from the LAG. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Machata authored
This test verifies driver behavior with regards to creation of RIFs for a LAG as ports are added or removed to/from it. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Machata authored
Add a selftest to verify that routing through several bridges works when LAG VLANs are used instead of physical ports, and that routing through LAG VLANs themselves works as physical ports are de/enslaved. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Machata authored
Add a selftest to verify that routing through a bridge works when LAG is used instead of physical ports. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Machata authored
Add a selftest that verifies routing through VLAN bridge uppers. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Machata authored
Add a selftest to verify that routing through a 1d bridge works when VLAN upper of a physical port is used instead of a physical port. Also verify that when a port is attached to an already-configured bridge, the configuration is applied. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Machata authored
Add two tests to deslave a port from and reenslave to a bridge. This should retain the ability of the system to forward traffic, but on an offloading driver that is sensitive to ordering of operations, it might not. The first test does this configuration in a way that relies on vlan_default_pvid to assign the PVID. The second test disables that autoconfiguration and configures PVID by hand in a separate step. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rohan G Thomas authored
For XGMAC versions < 2.2 number of supported mdio C22 addresses is restricted to 3. From XGMAC version 2.2 there are no restrictions on the C22 addresses, it supports all valid mdio addresses(0 to 31). Signed-off-by: Rohan G Thomas <rohan.g.thomas@intel.com> Acked-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Radu Pirea says: ==================== Add TJA1120 support This patch series got bigger than I expected. It cleans up the next-c45-tja11xx driver and adds support for the TJA1120(1000BaseT1 automotive phy). Master/slave custom implementation was replaced with the generic implementation (genphy_c45_config_aneg/genphy_c45_read_status). The TJA1120 and TJA1103 are a bit different when it comes to the PTP interface. The timestamp read procedure was changed, some addresses were changed and some bits were moved from one register to another. Adding TJA1120 support was tricky, and I tried not to duplicate the code. If something looks too hacky to you, I am open to suggestions. ==================== Link: https://lore.kernel.org/r/20230731091619.77961-1-radu-nicolae.pirea@oss.nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Radu Pirea (NXP OSS) authored
During PTP testing on early TJA1120 engineering samples I observed that if the link is lost and recovered, the tx timestamps will be randomly lost. To avoid this HW issue, the PCS should be reset. Resetting the PCS will break the link and we should reset the PCS on LINK UP -> LINK DOWN transition, otherwise we will trigger and infinite loop of LINK UP -> LINK DOWN events. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230731091619.77961-12-radu-nicolae.pirea@oss.nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Radu Pirea (NXP OSS) authored
On TJA1120, the external trigger timestamp now has a VALID bit. This changes the logic and we can't use the TJA1103 procedure. For TJA1103, we can always read a valid timestamp from the registers, compare the new timestamp with the old timestamp and, if they are not the same, an event occurred. This logic cannot be applied for TJA1120 because the timestamp is 0 if the VALID bit is not set. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Link: https://lore.kernel.org/r/20230731091619.77961-11-radu-nicolae.pirea@oss.nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Radu Pirea (NXP OSS) authored
For TJA1120, the enable bit for cable test is not writable if the PHY is not in test mode. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230731091619.77961-10-radu-nicolae.pirea@oss.nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Radu Pirea (NXP OSS) authored
TJA1120 and TJA1103 have a set of functional safety hardware tests executed after every reset, and when the tests are done, the IRQ line is asserted. For the moment, the purpose of these handlers is to acknowledge the IRQ and not to check the FUSA tests status. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230731091619.77961-9-radu-nicolae.pirea@oss.nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Radu Pirea (NXP OSS) authored
The egress timestamp FIFO/circular buffer work different on TJA1120 than TJA1103. For TJA1103 the new timestamp should be manually moved from the FIFO to the hardware buffer before checking if the timestamp is valid. For TJA1120 the hardware will move automatically the new timestamp from the FIFO to the buffer and the user should check the valid bit, read the timestamp and unlock the buffer by writing any of the buffer registers(which are read only). Another change for the TJA1120 is the behaviour of the EGR TS IRQ bit. This bit was a self-clear bit for TJA1103, but now should be cleared before reading the timestamp. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Link: https://lore.kernel.org/r/20230731091619.77961-8-radu-nicolae.pirea@oss.nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-