- 26 Jun, 2021 5 commits
-
-
Hao Fang authored
s/Hisilicon/HiSilicon/. It should use capital S, according to https://www.hisilicon.com/en. Signed-off-by: Hao Fang <fanghao11@huawei.com> Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
-
Bjorn Andersson authored
The MAINTAINER entry for the MAILBOX framework does not cover the dt-bindings and as such Jassi is not among the recipients for such patches. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
-
Zhen Lei authored
When devm_ioremap_resource() fails, a clear enough error message will be printed by its subfunction __devm_ioremap_resource(). The error information contains the device name, failure cause, and possibly resource information. Therefore, remove the error printing here to simplify code and reduce the binary size. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
-
Zhen Lei authored
When devm_ioremap_resource() fails, a clear enough error message will be printed by its subfunction __devm_ioremap_resource(). The error information contains the device name, failure cause, and possibly resource information. Therefore, remove the error printing here to simplify code and reduce the binary size. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
-
Zhen Lei authored
When devm_ioremap_resource() fails, a clear enough error message will be printed by its subfunction __devm_ioremap_resource(). The error information contains the device name, failure cause, and possibly resource information. Therefore, remove the error printing here to simplify code and reduce the binary size. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
-
- 20 Jun, 2021 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Borislav Petkov: "A single fix to restore fairness between control groups with equal priority" * tag 'sched_urgent_for_v5.13_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Correctly insert cfs_rq's to list on unthrottle
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Borislav Petkov: "A single fix for GICv3 to not take an interrupt in an NMI context" * tag 'irq_urgent_for_v5.13_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3: Workaround inconsistent PMR setting on NMI entry
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: "A first set of urgent fixes to the FPU/XSTATE handling mess^W code. (There's a lot more in the pipe): - Prevent corruption of the XSTATE buffer in signal handling by validating what is being copied from userspace first. - Invalidate other task's preserved FPU registers on XRSTOR failure (#PF) because latter can still modify some of them. - Restore the proper PKRU value in case userspace modified it - Reset FPU state when signal restoring fails Other: - Map EFI boot services data memory as encrypted in a SEV guest so that the guest can access it and actually boot properly - Two SGX correctness fixes: proper resources freeing and a NUMA fix" * tag 'x86_urgent_for_v5.13_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Avoid truncating memblocks for SGX memory x86/sgx: Add missing xa_destroy() when virtual EPC is destroyed x86/fpu: Reset state for all signal restore failures x86/pkru: Write hardware init value to PKRU when xstate is init x86/process: Check PF_KTHREAD and not current->mm for kernel threads x86/fpu: Invalidate FPU state after a failed XRSTOR from a user buffer x86/fpu: Prevent state corruption in __fpu__restore_sig() x86/ioremap: Map EFI-reserved memory as encrypted for SEV
-
- 19 Jun, 2021 15 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "Fix initrd corruption caused by our recent change to use relative jump labels. Fix a crash using perf record on systems without a hardware PMU backend. Rework our 64-bit signal handling slighty to make it more closely match the old behaviour, after the recent change to use unsafe user accessors. Thanks to Anastasia Kovaleva, Athira Rajeev, Christophe Leroy, Daniel Axtens, Greg Kurz, and Roman Bolshakov" * tag 'powerpc-5.13-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/perf: Fix crash in perf_instruction_pointer() when ppmu is not set powerpc: Fix initrd corruption with relative jump labels powerpc/signal64: Copy siginfo before changing regs->nip powerpc/mem: Add back missing header to fix 'no previous prototype' error
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v5.13-2021-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix refcount usage when processing PERF_RECORD_KSYMBOL. - 'perf stat' metric group fixes. - Fix 'perf test' non-bash issue with stat bpf counters. - Update unistd, in.h and socket.h with the kernel sources, silencing perf build warnings. * tag 'perf-tools-fixes-for-v5.13-2021-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: tools headers UAPI: Sync linux/in.h copy with the kernel sources tools headers UAPI: Sync asm-generic/unistd.h with the kernel original perf beauty: Update copy of linux/socket.h with the kernel sources perf test: Fix non-bash issue with stat bpf counters perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL perf metricgroup: Return error code from metricgroup__add_metric_sys_event_iter() perf metricgroup: Fix find_evsel_group() event selector
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: - A build fix to always build modules with the 'medany' code model, as the module loader doesn't support 'medlow'. - A Kconfig warning fix for the SiFive errata. - A pair of fixes that for regressions to the recent memory layout changes. - A fix for the FU740 device tree. * tag 'riscv-for-linus-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: dts: fu740: fix cache-controller interrupts riscv: Ensure BPF_JIT_REGION_START aligned with PMD size riscv: kasan: Fix MODULES_VADDR evaluation due to local variables' name riscv: sifive: fix Kconfig errata warning riscv32: Use medany C model for modules
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Vasily Gorbik: - Fix zcrypt ioctl hang due to AP queue msg counter dropping below 0 when pending requests are purged. - Two fixes for the machine check handler in the entry code. * tag 's390-5.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/ap: Fix hanging ioctl caused by wrong msg counter s390/mcck: fix invalid KVM guest condition check s390/mcck: fix calculation of SIE critical section size
-
Arnaldo Carvalho de Melo authored
To pick the changes in: 32182747 ("icmp: don't send out ICMP messages with a source address of 0.0.0.0") That don't result in any change in tooling, as INADDR_ are not used to generate id->string tables used by 'perf trace'. This addresses this build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h' diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h Cc: David S. Miller <davem@davemloft.net> Cc: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
To pick the changes in: 8b1462b6 ("quota: finish disable quotactl_path syscall") Those headers are used in some arches to generate the syscall table used in 'perf trace' to translate syscall numbers into strings. This addresses this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h' diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h Cc: Jan Kara <jack@suse.cz> Cc: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
To pick the changes in: ea6932d7 ("net: make get_net_ns return error if NET_NS is disabled") That don't result in any changes in the tables generated from that header. This silences this perf build warning: Warning: Kernel ABI header at 'tools/perf/trace/beauty/include/linux/socket.h' differs from latest version at 'include/linux/socket.h' diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h Cc: Changbin Du <changbin.du@intel.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Ian Rogers authored
$(( .. )) is a bash feature but the test's interpreter is !/bin/sh, switch the code to use expr. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: bpf@vger.kernel.org Link: http://lore.kernel.org/lkml/20210617184216.2075588-1-irogers@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Riccardo Mancini authored
ASan reported a memory leak of BPF-related ksymbols map and dso. The leak is caused by refount never reaching 0, due to missing __put calls in the function machine__process_ksymbol_register. Once the dso is inserted in the map, dso__put() should be called (map__new2() increases the refcount to 2). The same thing applies for the map when it's inserted into maps (maps__insert() increases the refcount to 2). $ sudo ./perf record -- sleep 5 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.025 MB perf.data (8 samples) ] ================================================================= ==297735==ERROR: LeakSanitizer: detected memory leaks Direct leak of 6992 byte(s) in 19 object(s) allocated from: #0 0x4f43c7 in calloc (/home/user/linux/tools/perf/perf+0x4f43c7) #1 0x8e4e53 in map__new2 /home/user/linux/tools/perf/util/map.c:216:20 #2 0x8cf68c in machine__process_ksymbol_register /home/user/linux/tools/perf/util/machine.c:778:10 [...] Indirect leak of 8702 byte(s) in 19 object(s) allocated from: #0 0x4f43c7 in calloc (/home/user/linux/tools/perf/perf+0x4f43c7) #1 0x8728d7 in dso__new_id /home/user/linux/tools/perf/util/dso.c:1256:20 #2 0x872015 in dso__new /home/user/linux/tools/perf/util/dso.c:1295:9 #3 0x8cf623 in machine__process_ksymbol_register /home/user/linux/tools/perf/util/machine.c:774:21 [...] Indirect leak of 1520 byte(s) in 19 object(s) allocated from: #0 0x4f43c7 in calloc (/home/user/linux/tools/perf/perf+0x4f43c7) #1 0x87b3da in symbol__new /home/user/linux/tools/perf/util/symbol.c:269:23 #2 0x888954 in map__process_kallsym_symbol /home/user/linux/tools/perf/util/symbol.c:710:8 [...] Indirect leak of 1406 byte(s) in 19 object(s) allocated from: #0 0x4f43c7 in calloc (/home/user/linux/tools/perf/perf+0x4f43c7) #1 0x87b3da in symbol__new /home/user/linux/tools/perf/util/symbol.c:269:23 #2 0x8cfbd8 in machine__process_ksymbol_register /home/user/linux/tools/perf/util/machine.c:803:8 [...] Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tommi Rantala <tommi.t.rantala@nokia.com> Link: http://lore.kernel.org/lkml/20210612173751.188582-1-rickyman7@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
John Garry authored
The error code is not set at all in the sys event iter function. This may lead to an uninitialized value of "ret" in metricgroup__add_metric() when no CPU metric is added. Fix by properly setting the error code. It is not necessary to init "ret" to 0 in metricgroup__add_metric(), as if we have no CPU or sys event metric matching, then "has_match" should be 0 and "ret" is set to -EINVAL. However gcc cannot detect that it may not have been set after the map_for_each_metric() loop for CPU metrics, which is strange. Fixes: be335ec2 ("perf metricgroup: Support adding metrics for system PMUs") Signed-off-by: John Garry <john.garry@huawei.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/1623335580-187317-3-git-send-email-john.garry@huawei.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
John Garry authored
The following command segfaults on my x86 broadwell: $ ./perf stat -M frontend_bound,retiring,backend_bound,bad_speculation sleep 1 WARNING: grouped events cpus do not match, disabling group: anon group { raw 0x10e } anon group { raw 0x10e } perf: util/evsel.c:1596: get_group_fd: Assertion `!(!leader->core.fd)' failed. Aborted (core dumped) The issue shows itself as a use-after-free in evlist__check_cpu_maps(), whereby the leader of an event selector (evsel) has been deleted (yet we still attempt to verify for an evsel). Fundamentally the problem comes from metricgroup__setup_events() -> find_evsel_group(), and has developed from the previous fix attempt in commit 9c880c24 ("perf metricgroup: Fix for metrics containing duration_time"). The problem now is that the logic in checking if an evsel is in the same group is subtly broken for the "cycles" event. For the "cycles" event, the pmu_name is NULL; however the logic in find_evsel_group() may set an event matched against "cycles" as used, when it should not be. This leads to a condition where an evsel is set, yet its leader is not. Fix the check for evsel pmu_name by not matching evsels when either has a NULL pmu_name. There is still a pre-existing metric issue whereby the ordering of the metrics may break the 'stat' function, as discussed at: https://lore.kernel.org/lkml/49c6fccb-b716-1bf0-18a6-cace1cdb66b9@huawei.com/ Fixes: 9c880c24 ("perf metricgroup: Fix for metrics containing duration_time") Signed-off-by: John Garry <john.garry@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> # On a Thinkpad T450S Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/1623335580-187317-2-git-send-email-john.garry@huawei.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
David Abdurachmanov authored
The order of interrupt numbers is incorrect. The order for FU740 is: DirError, DataError, DataFail, DirFail From SiFive FU740-C000 Manual: 19 - L2 Cache DirError 20 - L2 Cache DirFail 21 - L2 Cache DataError 22 - L2 Cache DataFail Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Jisheng Zhang authored
Andreas reported commit fc850476 ("riscv: bpf: Avoid breaking W^X") breaks booting with one kind of defconfig, I reproduced a kernel panic with the defconfig: [ 0.138553] Unable to handle kernel paging request at virtual address ffffffff81201220 [ 0.139159] Oops [#1] [ 0.139303] Modules linked in: [ 0.139601] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc5-default+ #1 [ 0.139934] Hardware name: riscv-virtio,qemu (DT) [ 0.140193] epc : __memset+0xc4/0xfc [ 0.140416] ra : skb_flow_dissector_init+0x1e/0x82 [ 0.140609] epc : ffffffff8029806c ra : ffffffff8033be78 sp : ffffffe001647da0 [ 0.140878] gp : ffffffff81134b08 tp : ffffffe001654380 t0 : ffffffff81201158 [ 0.141156] t1 : 0000000000000002 t2 : 0000000000000154 s0 : ffffffe001647dd0 [ 0.141424] s1 : ffffffff80a43250 a0 : ffffffff81201220 a1 : 0000000000000000 [ 0.141654] a2 : 000000000000003c a3 : ffffffff81201258 a4 : 0000000000000064 [ 0.141893] a5 : ffffffff8029806c a6 : 0000000000000040 a7 : ffffffffffffffff [ 0.142126] s2 : ffffffff81201220 s3 : 0000000000000009 s4 : ffffffff81135088 [ 0.142353] s5 : ffffffff81135038 s6 : ffffffff8080ce80 s7 : ffffffff80800438 [ 0.142584] s8 : ffffffff80bc6578 s9 : 0000000000000008 s10: ffffffff806000ac [ 0.142810] s11: 0000000000000000 t3 : fffffffffffffffc t4 : 0000000000000000 [ 0.143042] t5 : 0000000000000155 t6 : 00000000000003ff [ 0.143220] status: 0000000000000120 badaddr: ffffffff81201220 cause: 000000000000000f [ 0.143560] [<ffffffff8029806c>] __memset+0xc4/0xfc [ 0.143859] [<ffffffff8061e984>] init_default_flow_dissectors+0x22/0x60 [ 0.144092] [<ffffffff800010fc>] do_one_initcall+0x3e/0x168 [ 0.144278] [<ffffffff80600df0>] kernel_init_freeable+0x1c8/0x224 [ 0.144479] [<ffffffff804868a8>] kernel_init+0x12/0x110 [ 0.144658] [<ffffffff800022de>] ret_from_exception+0x0/0xc [ 0.145124] ---[ end trace f1e9643daa46d591 ]--- After some investigation, I think I found the root cause: commit 2bfc6cd8 ("move kernel mapping outside of linear mapping") moves BPF JIT region after the kernel: | #define BPF_JIT_REGION_START PFN_ALIGN((unsigned long)&_end) The &_end is unlikely aligned with PMD size, so the front bpf jit region sits with part of kernel .data section in one PMD size mapping. But kernel is mapped in PMD SIZE, when bpf_jit_binary_lock_ro() is called to make the first bpf jit prog ROX, we will make part of kernel .data section RO too, so when we write to, for example memset the .data section, MMU will trigger a store page fault. To fix the issue, we need to ensure the BPF JIT region is PMD size aligned. This patch acchieve this goal by restoring the BPF JIT region to original position, I.E the 128MB before kernel .text section. The modification to kasan_init.c is inspired by Alexandre. Fixes: fc850476 ("riscv: bpf: Avoid breaking W^X") Reported-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Jisheng Zhang authored
commit 2bfc6cd8 ("riscv: Move kernel mapping outside of linear mapping") makes use of MODULES_VADDR to populate kernel, BPF, modules mapping. Currently, MODULES_VADDR is defined as below for RV64: | #define MODULES_VADDR (PFN_ALIGN((unsigned long)&_end) - SZ_2G) But kasan_init() has two local variables which are also named as _start, _end, so MODULES_VADDR is evaluated with the local variable _end rather than the global "_end" as we expected. Fix this issue by renaming the two local variables. Fixes: 2bfc6cd8 ("riscv: Move kernel mapping outside of linear mapping") Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.13-rc7, including fixes from wireless, bpf, bluetooth, netfilter and can. Current release - regressions: - mlxsw: spectrum_qdisc: Pass handle, not band number to find_class() to fix modifying offloaded qdiscs - lantiq: net: fix duplicated skb in rx descriptor ring - rtnetlink: fix regression in bridge VLAN configuration, empty info is not an error, bot-generated "fix" was not needed - libbpf: s/rx/tx/ typo on umem->rx_ring_setup_done to fix umem creation Current release - new code bugs: - ethtool: fix NULL pointer dereference during module EEPROM dump via the new netlink API - mlx5e: don't update netdev RQs with PTP-RQ, the special purpose queue should not be visible to the stack - mlx5e: select special PTP queue only for SKBTX_HW_TSTAMP skbs - mlx5e: verify dev is present in get devlink port ndo, avoid a panic Previous releases - regressions: - neighbour: allow NUD_NOARP entries to be force GCed - further fixes for fallout from reorg of WiFi locking (staging: rtl8723bs, mac80211, cfg80211) - skbuff: fix incorrect msg_zerocopy copy notifications - mac80211: fix NULL ptr deref for injected rate info - Revert "net/mlx5: Arm only EQs with EQEs" it may cause missed IRQs Previous releases - always broken: - bpf: more speculative execution fixes - netfilter: nft_fib_ipv6: skip ipv6 packets from any to link-local - udp: fix race between close() and udp_abort() resulting in a panic - fix out of bounds when parsing TCP options before packets are validated (in netfilter: synproxy, tc: sch_cake and mptcp) - mptcp: improve operation under memory pressure, add missing wake-ups - mptcp: fix double-lock/soft lookup in subflow_error_report() - bridge: fix races (null pointer deref and UAF) in vlan tunnel egress - ena: fix DMA mapping function issues in XDP - rds: fix memory leak in rds_recvmsg Misc: - vrf: allow larger MTUs - icmp: don't send out ICMP messages with a source address of 0.0.0.0 - cdc_ncm: switch to eth%d interface naming" * tag 'net-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (139 commits) net: ethernet: fix potential use-after-free in ec_bhf_remove selftests/net: Add icmp.sh for testing ICMP dummy address responses icmp: don't send out ICMP messages with a source address of 0.0.0.0 net: ll_temac: Avoid ndo_start_xmit returning NETDEV_TX_BUSY net: ll_temac: Fix TX BD buffer overwrite net: ll_temac: Add memory-barriers for TX BD access net: ll_temac: Make sure to free skb when it is completely used MAINTAINERS: add Guvenc as SMC maintainer bnxt_en: Call bnxt_ethtool_free() in bnxt_init_one() error path bnxt_en: Fix TQM fastpath ring backing store computation bnxt_en: Rediscover PHY capabilities after firmware reset cxgb4: fix wrong shift. mac80211: handle various extensible elements correctly mac80211: reset profile_periodicity/ema_ap cfg80211: avoid double free of PMSR request cfg80211: make certificate generation more robust mac80211: minstrel_ht: fix sample time check net: qed: Fix memcpy() overflow of qed_dcbx_params() net: cdc_eem: fix tx fixup skb leak net: hamradio: fix memory leak in mkiss_close ...
-
- 18 Jun, 2021 16 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fix from David Sterba: "One more fix, for a space accounting bug in zoned mode. It happens when a block group is switched back rw->ro and unusable bytes (due to zoned constraints) are subtracted twice. It has user visible effects so I consider it important enough for late -rc inclusion and backport to stable" * tag 'for-5.13-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: zoned: fix negative space_info->bytes_readonly
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fixes from Bjorn Helgaas: - Clear 64-bit flag for host bridge windows below 4GB to fix a resource allocation regression added in -rc1 (Punit Agrawal) - Fix tegra194 MCFG quirk build regressions added in -rc1 (Jon Hunter) - Avoid secondary bus resets on TI KeyStone C667X devices (Antti Järvinen) - Avoid secondary bus resets on some NVIDIA GPUs (Shanker Donthineni) - Work around FLR erratum on Huawei Intelligent NIC VF (Chiqijun) - Avoid broken ATS on AMD Navi14 GPU (Evan Quan) - Trust Broadcom BCM57414 NIC to isolate functions even though it doesn't advertise ACS support (Sriharsha Basavapatna) - Work around AMD RS690 BIOSes that don't configure DMA above 4GB (Mikel Rychliski) - Fix panic during PIO transfer on Aardvark controller (Pali Rohár) * tag 'pci-v5.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: aardvark: Fix kernel panic during PIO transfer PCI: Add AMD RS690 quirk to enable 64-bit DMA PCI: Add ACS quirk for Broadcom BCM57414 NIC PCI: Mark AMD Navi14 GPU ATS as broken PCI: Work around Huawei Intelligent NIC VF FLR erratum PCI: Mark some NVIDIA GPUs to avoid bus reset PCI: Mark TI C667X to avoid bus reset PCI: tegra194: Fix MCFG quirk build regressions PCI: of: Clear 64-bit flag for non-prefetchable memory below 4GB
-
Matthew Wilcox (Oracle) authored
If a task is killed during a page fault, it does not currently call sb_end_pagefault(), which means that the filesystem cannot be frozen at any time thereafter. This may be reported by lockdep like this: ==================================== WARNING: fsstress/10757 still has locks held! 5.13.0-rc4-build4+ #91 Not tainted ------------------------------------ 1 lock held by fsstress/10757: #0: ffff888104eac530 ( sb_pagefaults as filesystem freezing is modelled as a lock. Fix this by removing all the direct returns from within the function, and using 'ret' to indicate whether we were interrupted or successful. Fixes: 1cf7a151 ("afs: Implement shared-writeable mmap") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: David Howells <dhowells@redhat.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/20210616154900.1958373-1-willy@infradead.org/Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Pavel Skripkin authored
static void ec_bhf_remove(struct pci_dev *dev) { ... struct ec_bhf_priv *priv = netdev_priv(net_dev); unregister_netdev(net_dev); free_netdev(net_dev); pci_iounmap(dev, priv->dma_io); pci_iounmap(dev, priv->io); ... } priv is netdev private data, but it is used after free_netdev(). It can cause use-after-free when accessing priv pointer. So, fix it by moving free_netdev() after pci_iounmap() calls. Fixes: 6af55ff5 ("Driver for Beckhoff CX5020 EtherCAT master module.") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'mac80211-for-net-2021-06-18' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A couple of straggler fixes: * a minstrel HT sample check fix * peer measurement could double-free on races * certificate file generation at build time could sometimes hang * some parameters weren't reset between connections in mac80211 * some extensible elements were treated as non- extensible, possibly causuing bad connections (or failures) if the AP adds data ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Toke Høiland-Jørgensen authored
This adds a new icmp.sh selftest for testing that the kernel will respond correctly with an ICMP unreachable message with the dummy (192.0.0.8) source address when there are no IPv4 addresses configured to use as source addresses. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Toke Høiland-Jørgensen authored
When constructing ICMP response messages, the kernel will try to pick a suitable source address for the outgoing packet. However, if no IPv4 addresses are configured on the system at all, this will fail and we end up producing an ICMP message with a source address of 0.0.0.0. This can happen on a box routing IPv4 traffic via v6 nexthops, for instance. Since 0.0.0.0 is not generally routable on the internet, there's a good chance that such ICMP messages will never make it back to the sender of the original packet that the ICMP message was sent in response to. This, in turn, can create connectivity and PMTUd problems for senders. Fortunately, RFC7600 reserves a dummy address to be used as a source for ICMP messages (192.0.0.8/32), so let's teach the kernel to substitute that address as a last resort if the regular source address selection procedure fails. Below is a quick example reproducing this issue with network namespaces: ip netns add ns0 ip l add type veth peer netns ns0 ip l set dev veth0 up ip a add 10.0.0.1/24 dev veth0 ip a add fc00:dead:cafe:42::1/64 dev veth0 ip r add 10.1.0.0/24 via inet6 fc00:dead:cafe:42::2 ip -n ns0 l set dev veth0 up ip -n ns0 a add fc00:dead:cafe:42::2/64 dev veth0 ip -n ns0 r add 10.0.0.0/24 via inet6 fc00:dead:cafe:42::1 ip netns exec ns0 sysctl -w net.ipv4.icmp_ratelimit=0 ip netns exec ns0 sysctl -w net.ipv4.ip_forward=1 tcpdump -tpni veth0 -c 2 icmp & ping -w 1 10.1.0.1 > /dev/null tcpdump: verbose output suppressed, use -v[v]... for full protocol decode listening on veth0, link-type EN10MB (Ethernet), snapshot length 262144 bytes IP 10.0.0.1 > 10.1.0.1: ICMP echo request, id 29, seq 1, length 64 IP 0.0.0.0 > 10.0.0.1: ICMP net 10.1.0.1 unreachable, length 92 2 packets captured 2 packets received by filter 0 packets dropped by kernel With this patch the above capture changes to: IP 10.0.0.1 > 10.1.0.1: ICMP echo request, id 31127, seq 1, length 64 IP 192.0.0.8 > 10.0.0.1: ICMP net 10.1.0.1 unreachable, length 92 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: Juliusz Chroboczek <jch@irif.fr> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Esben Haabendal authored
As documented in Documentation/networking/driver.rst, the ndo_start_xmit method must not return NETDEV_TX_BUSY under any normal circumstances, and as recommended, we simply stop the tx queue in advance, when there is a risk that the next xmit would cause a NETDEV_TX_BUSY return. Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Esben Haabendal authored
Just as the initial check, we need to ensure num_frag+1 buffers available, as that is the number of buffers we are going to use. This fixes a buffer overflow, which might be seen during heavy network load. Complete lockup of TEMAC was reproducible within about 10 minutes of a particular load. Fixes: 84823ff8 ("net: ll_temac: Fix race condition causing TX hang") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Esben Haabendal authored
Add a couple of memory-barriers to ensure correct ordering of read/write access to TX BDs. In xmit_done, we should ensure that reading the additional BD fields are only done after STS_CTRL_APP0_CMPLT bit is set. When xmit_done marks the BD as free by setting APP0=0, we need to ensure that the other BD fields are reset first, so we avoid racing with the xmit path, which writes to the same fields. Finally, making sure to read APP0 of next BD after the current BD, ensures that we see all available buffers. Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Esben Haabendal authored
With the skb pointer piggy-backed on the TX BD, we have a simple and efficient way to free the skb buffer when the frame has been transmitted. But in order to avoid freeing the skb while there are still fragments from the skb in use, we need to piggy-back on the TX BD of the skb, not the first. Without this, we are doing use-after-free on the DMA side, when the first BD of a multi TX BD packet is seen as completed in xmit_done, and the remaining BDs are still being processed. Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Karsten Graul authored
Add Guvenc as maintainer for Shared Memory Communications (SMC) Sockets. Cc: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Guvenc Gulce <guvenc@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Bug fixes This patchset includes 3 small bug fixes to reinitialize PHY capabilities after firmware reset, setup the chip's internal TQM fastpath ring backing memory properly for RoCE traffic, and to free ethtool related memory if driver probe fails. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Somnath Kotur authored
bnxt_ethtool_init() may have allocated some memory and we need to call bnxt_ethtool_free() to properly unwind if bnxt_init_one() fails. Fixes: 7c380918 ("bnxt_en: Refactor bnxt_init_one() and turn on TPA support on 57500 chips.") Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rukhsana Ansari authored
TQM fastpath ring needs to be sized to store both the requester and responder side of RoCE QPs in TQM for supporting bi-directional tests. Fix bnxt_alloc_ctx_mem() to multiply the RoCE QPs by a factor of 2 when computing the number of entries for TQM fastpath ring. This fixes an RX pipeline stall issue when running bi-directional max RoCE QP tests. Fixes: c7dd7ab4 ("bnxt_en: Improve TQM ring context memory sizing formulas.") Signed-off-by: Rukhsana Ansari <rukhsana.ansari@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
There is a missing bnxt_probe_phy() call in bnxt_fw_init_one() to rediscover the PHY capabilities after a firmware reset. This can cause some PHY related functionalities to fail after a firmware reset. For example, in multi-host, the ability for any host to configure the PHY settings may be lost after a firmware reset. Fixes: ec5d31e3 ("bnxt_en: Handle firmware reset status during IF_UP.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-