Error should be checked with IS_ERR after calling kthread_run()
instead of comparing the returned pointer to an int.

Found by sparse warning:

incompatible types for operation (<)
    left side has type struct task_struct *tx_task_struct
    right side has type int
Signed-off-by: Joseph Wright <rjosephwright@gmail.com>
Reviewed-by: Marcus Wolf <linux@wolf-entwicklungen.de>
Tested-by: Marcus Wolf <linux@wolf-entwicklungen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Declare functions static to fix sparse warnings:

warning: symbol 'pi433_receive' was not declared. Should it be static?
warning: symbol 'pi433_tx_thread' was not declared. Should it be static?
Signed-off-by: Joseph Wright <rjosephwright@gmail.com>
Reviewed-by: Marcus Wolf <linux@wolf-entwicklungen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The pi433 driver uses SPI interfaces so it should depend on SPI.
Also, the "default n" can be removed since that is already the
default.

Fixes these build errors when SPI is not enabled:

drivers/staging/pi433/pi433_if.o: In function `pi433_probe':
pi433_if.c:(.text+0x1135): undefined reference to `spi_setup'
pi433_if.c:(.text+0x1177): undefined reference to `spi_write_then_read'
drivers/staging/pi433/pi433_if.o: In function `pi433_init':
pi433_if.c:(.init.text+0xb8): undefined reference to `__spi_register_driver'
drivers/staging/pi433/rf69.o: In function `rf69_read_fifo':
rf69.c:(.text+0x102): undefined reference to `spi_sync'
drivers/staging/pi433/rf69.o: In function `rf69_write_fifo':
rf69.c:(.text+0x248): undefined reference to `spi_sync'
drivers/staging/pi433/rf69.o: In function `rf69_read_reg':
rf69.c:(.text+0x290): undefined reference to `spi_write_then_read'
drivers/staging/pi433/rf69.o: In function `rf69_write_reg':
rf69.c:(.text+0x523): undefined reference to `spi_sync'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Marcus Wolf <linux@wolf-entwicklungen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

copy_to_user() to user returns the number of bytes that weren't copied,
but we should be returning -EFAULT to the user.

Fixes: 874bcba6 ("staging: pi433: New driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kfree(NULL) is safe and their is no need for a NULL check. Pointed out
by checkpatch.
Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
Acked-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The SSI_LOG macros already add __func__ to log messages, so remove
log message that add them a second time in the log message itself.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes checkpatch.pl alignment warnings.
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes checkpatch.pl alignment warnings.
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes checkpatch.pl alignment warnings.
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes checkpatch.pl alignment warnings.
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes checkpatch.pl alignment warnings.
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes checkpatch.pl alignment warnings.
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a patch to the rtw_mlme_ext.c file that fixes up a brace error
found by the checkpatch.pl tool
Signed-off-by: Armin Schoenlieb <armetallica@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Trivial fix to spelling mistake in IEEE80211_DEBUG message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The cfg_action bit comes from the high bit of pmsg[4] so the
current mask and shift are in correct and always result in
zero.  Fix this by using the correct mask and shif to get the
correct cfg_action bit value.

Detected by CoverityScan, CID#142890 ("Operands don't affect result")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix an error detected by checkpatch.pl on line 75 and move the opening
brace after the function signature to a new line.
Signed-off-by: Munir Contractor <munircontractor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

checkpatch.pl line over 80 characters so fix the formatting
for coding style compliance.
Signed-off-by: Deb McLemore <debmc@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Unnecessary platform_set_drvdata() has been removed since the driver
core clears the driver data to NULL after device release or on
probe failure. There is no need to manually clear the device
driver data to NULL.

The Coccinelle semantic patch used to make this change is as follows:
//<smpl>
@@
struct platform_device *pdev;
@@
- platform_set_drvdata(pdev, NULL);
//</smpl>
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Parenthesis alignment issues reported by checkpatch,
fixed here.
Signed-off-by: Diwakar Sharma <sharmalxmail@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

attribute_group are not supposed to change at runtime. All functions
working with attribute_group provided by <linux/sysfs.h> work
with const attribute_group. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-4.14a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First round of IIO new device support, features and cleanups for the 4.14 cycle.

4 completely new drivers in this set and plenty of other stuff.

One ABI change due to a silly mistake a long time back. Hopefully no
one will notice.  It effects the numerical order of consumer device
channels which was the reverse of the obvious.  It's going the slow
way to allow us some margin to spot if we have broken userspace or
not (seems unlikely)

New Device Support
* ccs811
  - new driver for the Volatile Organic Compounds (VOC) sensor.
* dln2 adc
  - new driver for the ADC on this flexible usb board.
* EP93xx
  - new driver for this Cirrus logic SoC ADC.
* ltc2471
  - new ADC driver support the ltc2471 and ltc2473
* st_accel
  - add trivial table entries to support H3LIS331DL, LIS331DL, LIS3LV02DL.
* st_gyro
  - add L3GD20H support (again) having fixed the various things that were
    broken in the first try.  Includes devicetree binding.
* stm32 dac
  - add support for the DACs in the STM32F4 series

Features
* Documentation
  - add missing power attribute documentation to the ABI docs.
* at91-sama5d2
  - add hardware trigger and buffered capture support with bindings.
  - suspend and resume functionality.
* bmc150
  - support for the BOSC0200 ACPI device id seen on some tablets.
* hdc100x
  - devicetree bindings
  - document supported devices
  - match table and device ids.
* hts221
  - support active low interrupts (with bindings)
  - open drain mode with bindings.
* htu21
  - OF match table and bindings.
* lsm6dsx
  - open drain mode with bindings
* ltc2497
  - add support for board file based consumer mapping.
* ms5367
  - OF match table and bindings.
* mt7622
  - binding document and OF match table.
  - suspend and resume support.
* rpr0521
  - triggered buffer support.
* tsys01
  - OF match table and bindings.

Cleanups and minor fixes
* core
  - fix ordering of IIO channels to entry numbers when using
    iio_map_array_register rather than reversing them.
  - use the new %pOF format specifier rather than full name for the
    device tree nodes.
* ad7280a
  - fix potential issue with macro argument reuse.
* ad7766
  - drop a pointless NULL value check as it's done in the gpiod code.
* adis16400
  - unsigned -> unsigned int.
* at91 adc
  - make some init data static to reduce code size.
* at91-sama5d2 ADC
  - make some init data static to reduce code size.
* da311
  - make some init data static to reduce code size.
* hid-sensor-rotation
  - drop an unnecessary static.
* hts221
  - refactor the write_with_mask code.
  - move the BDU configuration to probe time as there is no reason for it
    to change.
  - avoid overwriting reserved data during power-down.  This is a fix, but
    the infrastructure need was too invasive to send it to mainline except
    in a merge window.  It's not a regression as it was always wrong.
  - avoid reconfigure the sampling frequency multiple times by just
    doing it in the write_raw function directly.
  - refactor the power_on/off calls into a set_enable.
  - move the dry-enable logic into trig_set_state as that is the only
    place it was used.
* ina219
  - fix polling of ina226 conversion ready flag.
* imx7d
  - add vendor name in kconfig for consistency with similar parts.
* mcp3422
  - Change initial channel to 0 as it feels more logical.
  - Check for some errors in probe.
* meson-saradc
  - add a check of of_match_device return value.
* mpu3050
  - allow open drain for any interrupt type.
* rockchip adc
  - add check on of_match_device return value.
* sca3000
  - drop a trailing whitespace.
* stm32 adc
  - make array stm32h7_adc_ckmodes_spec static.
* stm32 dac
  - fix an error message.
* stm32 timers
  - fix clock name in docs to match reality after changes.
* st_accel
  - explicit OF table (spi).
  - add missing entries to OF table (i2c).
  - rename of_device_id table to drop the part name.
  - adding missing lis3l02dq entry to bindings.
  - rename H3LIS331DL_DRIVER_NAME to line up with similar entries in driver.
* st_gyro
  - explicit OF table (spi).
* st_magn
  - explicit OF table (spi).
  - enable multiread for lis3mdl.
* st_pressure
  - explicit OF table (spi).
* st_sensors common.
  - move st_sensors_of_i2c_probe and rename to make it available for spi
  drivers.
* tsc3472
  - don't write an extra byte when writing the ATIME register.
  - add a link to the datasheet.
* tsl2x7x - continued staging cleanups
  - add of_match_table.
  - drop redundant power_state sysfs attribute.
  - drop wrapper tsl2x7x_i2c_read.
  - clean up i2c calls made in tsl2x7x_als_calibrate.
  - refactor the read and write _event_value callbacks to handle additional
    elements.
  - use usleep_range instead of mdelay.
  - check return value from tsl2x7x_invoke_change.
* zpa2326
  - add some newline to the end of logging macros.

Move data-ready configuration in hts221_buffer.c since it is only related
to trigger logic
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add open drain support in order to share requested IRQ line between
hts221 device and other peripherals
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

New driver adding support for ADC found on Cirrus Logic EP93xx series of SoCs.
Board specific code must take care to create plaform device with all necessary
resources.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This resolves a merge issue and gets the vmbox drm driver into this
branch to be able to start taking fixes for it...
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This adds a perl script to actually parse the MAINTAINERS file, clean up
some whitespace in it, warn about errors in it, and then properly sort
the end result.

My perl-fu is atrocious, so the script has basically been created by
randomly putting various characters in a pile, mixing them around, and
then looking it the end result does anything interesting when used as a
perl script.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Prepping for scripting the MAINTAINERS file cleanup (and possible split)
showed a couple of cases where the headers for a couple of entries were
bogus.

There's a few different kinds of bogosities:

 - the X-GENE SOC EDAC case was confused and split over two lines

 - there were four entries for "GREYBUS PROTOCOLS DRIVERS" that were all
   different things.

 - the NOKIA N900 CAMERA SUPPORT" was duplicated

all of which were more obvious when you started doing associative arrays
in perl to track these things by the header (so that we can alphabetize
this thing properly, and so that we might split it up by the data too).

Cc: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull xen fixes from Juergen Gross:
 "Some fixes and cleanups for running under Xen"

* tag 'for-linus-4.13b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/balloon: don't online new memory initially
  xen/x86: fix cpu hotplug
  xen/grant-table: log the lack of grants
  xen/x86: Don't BUG on CPU0 offlining

When setting up the Xenstore watch for the memory target size the new
watch will fire at once. Don't try to reach the configured target size
by onlining new memory in this case, as the current memory size will
be smaller in almost all cases due to e.g. BIOS reserved pages.

Onlining new memory will lead to more problems e.g. undesired conflicts
with NVMe devices meant to be operated as block devices.

Instead remember the difference between target size and current size
when the watch fires for the first time and apply it to any further
size changes, too.

In order to avoid races between balloon.c and xen-balloon.c init calls
do the xen-balloon.c initialization from balloon.c.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Commit dc6416f1 ("xen/x86: Call
cpu_startup_entry(CPUHP_AP_ONLINE_IDLE) from xen_play_dead()")
introduced an error leading to a stack overflow of the idle task when
a cpu was brought offline/online many times: by calling
cpu_startup_entry() instead of returning at the end of xen_play_dead()
do_idle() would be entered again and again.

Don't use cpu_startup_entry(), but cpuhp_online_idle() instead allowing
to return from xen_play_dead().

Cc: <stable@vger.kernel.org> # 4.12
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

log a message when we enter this situation:
1) we already allocated the max number of available grants from hypervisor
and
2) we still need more (but the request fails because of 1)).

Sometimes the lack of grants causes IO hangs in xen_blkfront devices.
Adding this log would help debuging.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

CONFIG_BOOTPARAM_HOTPLUG_CPU0 allows to offline CPU0 but Xen HVM guests
BUG() in xen_teardown_timer(). Remove the BUG_ON(), this is probably a
leftover from ancient times when CPU0 hotplug was impossible, it works
just fine for HVM.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Carlo Caione <carlo@caione.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: linux-iio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

CHECK: Macro argument reuse 'addr' - possible side-effects?

convert AD7280A_DEVADDR to ad7280a_devaddr static function
to fix checkpath check

v3: small style changes
Signed-off-by: Jaya Durga <rjdurga@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Update hts221 device binding with active-low interrupts support
(IRQ_TYPE_LEVEL_LOW and IRQ_TYPE_EDGE_FALLING).
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add support for active low interrupts (IRQF_TRIGGER_LOW and
IRQF_TRIGGER_FALLING). Configure the device as active high or low
according to the requested irq line.
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Configure sensor ODR just in hts221_write_raw() in order to avoid
to set device sample rate multiple times.
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>