Vaio VJFE-ADL is equipped with ALC269VC, and it needs
ALC298_FIXUP_SPK_VOLUME quirk to make its headset mic work.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240201122114.30080-1-edson.drosdeck@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-fix-v6.8-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.8

Quite a lot of fixes that came in since the merge window, a large
portion for for Qualcomm and ES8326.

The 8 DAI support for Qualcomm is just raising a constant to allow for
devies that otherwise only need DTs, and there's a few other device ID
updates for sunxi (Allwinner) and AMD platforms.

There currently exists two thinkpad headset jack fixups:
ALC285_FIXUP_THINKPAD_NO_BASS_SPK_HEADSET_JACK
ALC285_FIXUP_THINKPAD_HEADSET_JACK

The latter is applied to alc285 and alc287 thinkpads which contain
bass speakers.
However, the former was only being applied to alc285 thinkpads,
leaving non-bass alc287 thinkpads with no headset button controls.
This patch fixes that by adding ALC285_FIXUP_THINKPAD_NO_BASS_SPK_HEADSET_JACK
to the alc287 chains, allowing the detection of headset buttons.
Signed-off-by: José Relvas <josemonsantorelvas@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240131113407.34698-3-josemonsantorelvas@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Add 4 missing formats to 'snd_pcm_format_names' array in order to be
able to get their names with 'snd_pcm_format_name' function.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20240125223522.1122765-1-ivan.orlov0322@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Adds sound support for ASUS Zenbook UM3402YAR with missing DSD
Signed-off-by: Chhayly Leang <clw.leang@gmail.com>
Link: https://lore.kernel.org/r/20240126080912.87422-1-clw.leang@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Add new model entry into configuration table.
Signed-off-by: Kenzo Gomez <kenzo.sgomez@gmail.com>
Link: https://lore.kernel.org/r/20240127164621.26431-1-kenzo.sgomez@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Previous commit that added support for Huawei MateBook D16 2021
with Ryzen 4600H (HVY-WXX9 M1010) was incomplete.

To activate support for this laptop, the DMI table in
acp3x-es83xx machine driver must also be updated.

Fixes: b5338b1b ("ASoC: amd: acp: Add support for a new Huawei Matebook laptop")
Signed-off-by: Marian Postevca <posteuca@mutex.one>
Link: https://msgid.link/r/20240128172229.657142-1-posteuca@mutex.oneSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Chen-Yu Tsai <wens@kernel.org>:

This series adds SPDIF controllers for the H616 and H618.
There's also a fix for SPDIF on H6: the controller also has a
receiver that was not correctly modeled.

The SPDIF hardware block found in the H616 SoC has the same layout as
the one found in the H6 SoC, except that it is missing the receiver
side.

Add a new compatible string for it.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://msgid.link/r/20240127163247.384439-3-wens@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

When the H6 was added to the bindings, only the TX DMA channel was
added. As the hardware supports both transmit and receive functions,
the binding is missing the RX DMA channel and is thus incorrect.
Also, the reset control was not made mandatory.

Add the RX DMA channel for SPDIF on H6 by removing the compatible from
the list of compatibles that should only have a TX DMA channel. And add
the H6 compatible to the list of compatibles that require the reset
control to be present.

Fixes: b2045303 ("dt-bindings: sound: sun4i-spdif: Add Allwinner H6 compatible")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://msgid.link/r/20240127163247.384439-2-wens@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The SPDIF hardware block found in the H616 SoC has the same layout as
the one found in the H6 SoC, except that it is missing the receiver
side.

Since the driver currently only supports the transmit function, support
for the H616 is identical to what is currently done for the H6.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://msgid.link/r/20240127163247.384439-4-wens@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The laptop requires a quirk ID to enable its internal microphone. Add
it to the DMI quirk table.
Reported-by: Techno Mooney <techno.mooney@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218402
Cc: stable@vger.kernel.org
Signed-off-by: Techno Mooney <techno.mooney@gmail.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://msgid.link/r/20240129081148.1044891-1-bagasdotme@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Many devices with a single alternate setting do not have a Valid
Alternate Setting Control and validation performed by
validate_sample_rate_table_v2v3() doesn't work on them and is not
really needed. So check the presense of control before sending
altsetting validation requests.

MOTU Microbook IIc is suffering the most without this check. It
takes up to 40 seconds to bootup due to how slow it switches
sampling rates:

[ 2659.164824] usb 3-2: New USB device found, idVendor=07fd, idProduct=0004, bcdDevice= 0.60
[ 2659.164827] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2659.164829] usb 3-2: Product: MicroBook IIc
[ 2659.164830] usb 3-2: Manufacturer: MOTU
[ 2659.166204] usb 3-2: Found last interface = 3
[ 2679.322298] usb 3-2: No valid sample rate available for 1:1, assuming a firmware bug
[ 2679.322306] usb 3-2: 1:1: add audio endpoint 0x3
[ 2679.322321] usb 3-2: Creating new data endpoint #3
[ 2679.322552] usb 3-2: 1:1 Set sample rate 96000, clock 1
[ 2684.362250] usb 3-2: 2:1: cannot get freq (v2/v3): err -110
[ 2694.444700] usb 3-2: No valid sample rate available for 2:1, assuming a firmware bug
[ 2694.444707] usb 3-2: 2:1: add audio endpoint 0x84
[ 2694.444721] usb 3-2: Creating new data endpoint #84
[ 2699.482103] usb 3-2: 2:1 Set sample rate 96000, clock 1
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20240129121254.3454481-1-alexander@tsoy.meSigned-off-by: Takashi Iwai <tiwai@suse.de>

This reverts commit 67794f88.

We need to explicitly set up the clock selector to workaround a problem
with the Behringer mixers. This was originally done in d2e8f641
("ALSA: usb-audio: Explicitly set up the clock selector")

The problem with MOTU M Series mentioned in commit message was fixed in
a different way by checking control capabilities of clock selectors.
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20240128132338.819273-1-alexander@tsoy.meSigned-off-by: Takashi Iwai <tiwai@suse.de>

This HP Laptop uses ALC236 codec with COEF 0x07 controlling the
mute LED. Enable existing quirk for this device.
Signed-off-by: Luka Guzenko <l.guzenko@web.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240128155704.2333812-1-l.guzenko@web.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

If you connect an external headset/microphone to the 3.5mm jack on the
Acer Swift 1 SF114-32 it does not recognize the microphone. This fixes
that and gives the user the ability to choose between internal and
headset mic.
Signed-off-by: David Senoner <seda18@rolmail.net>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240126155626.2304465-1-seda18@rolmail.netSigned-off-by: Takashi Iwai <tiwai@suse.de>

Clock selector control might be read-only. Add corresponding checks
to prevent sending control requests that would fail.
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20240125205457.28258-1-alexander@tsoy.meSigned-off-by: Takashi Iwai <tiwai@suse.de>

The quirk table entries should be put in the USB ID order, but some
entries have been put in random places.  Re-sort them.

Fixes: bf990c10 ("ALSA: usb-audio: add quirk to fix Hamedal C20 disconnect issue")
Fixes: fd28941c ("ALSA: usb-audio: Add new quirk FIXED_RATE for JBL Quantum810 Wireless")
Fixes: dfd5fe19 ("ALSA: usb-audio: Add FIXED_RATE quirk for JBL Quantum610 Wireless")
Fixes: 4a63e68a ("ALSA: usb-audio: Fix microphone sound on Nexigo webcam.")
Fixes: 7822baa8 ("ALSA: usb-audio: add quirk for RODE NT-USB+")
Fixes: 4fb7c24f ("ALSA: usb-audio: Add quirk for Fiero SC-01")
Fixes: 2307a0e1 ("ALSA: usb-audio: Add quirk for Fiero SC-01 (fw v1.0.0)")
Link: https://lore.kernel.org/r/20240124155307.16996-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The RODE NT-USB+ is marketed as a professional usb microphone, however the
usb audio interface is a mess:

[    1.130977] usb 1-5: new full-speed USB device number 2 using xhci_hcd
[    1.503906] usb 1-5: config 1 has an invalid interface number: 5 but max is 4
[    1.503912] usb 1-5: config 1 has no interface number 4
[    1.519689] usb 1-5: New USB device found, idVendor=19f7, idProduct=0035, bcdDevice= 1.09
[    1.519695] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.519697] usb 1-5: Product: RØDE NT-USB+
[    1.519699] usb 1-5: Manufacturer: RØDE
[    1.519700] usb 1-5: SerialNumber: 1D773A1A
[    8.327495] usb 1-5: 1:1: cannot get freq at ep 0x82
[    8.344500] usb 1-5: 1:2: cannot get freq at ep 0x82
[    8.365499] usb 1-5: 2:1: cannot get freq at ep 0x2

Add QUIRK_FLAG_GET_SAMPLE_RATE to work around the broken sample rate get.
I have asked Rode support to fix it, but they show no interest.
Signed-off-by: Sean Young <sean@mess.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240124151524.23314-1-sean@mess.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

Audio control requests that sets sampling frequency sometimes fail on
this card. Adding delay between control messages eliminates that problem.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217601
Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20240124130239.358298-1-alexander@tsoy.meSigned-off-by: Takashi Iwai <tiwai@suse.de>

virtqueue_enable_cb() will call virtqueue_poll() which will check if
queue is broken at beginning, so remove the virtqueue_is_broken() call
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20240124120834.49410-1-lirongqing@baidu.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

fix typo in midi fallback log.
Signed-off-by: Jacob Siverskog <jacob@teenage.engineering>
Fixes: ff49d1df ("ALSA: usb-audio: USB MIDI 2.0 UMP support")
Link: https://lore.kernel.org/r/20240124101827.35433-1-jacob@teenage.engineeringSigned-off-by: Takashi Iwai <tiwai@suse.de>

SSID 0x0c0d platform. It can't mute speaker when HP plugged.
This patch add quirk to fill speaker pin verbtable.
And disable speaker passthrough.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/38b82976a875451d833d514cee34ff6a@realtek.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Since commit 086b957c ("ALSA: usb-audio: Skip the clock selector
inquiry for single connections") we are already skipping clock selector
inquiry if only one clock source is connected, but we are still sending
a set request. Lets skip that too.

This should fix errors when setting a sample rate on devices that don't
have any controls present within the clock selector. An example of such
device is the new revision of MOTU M Series (07fd:000b):

      AudioControl Interface Descriptor:
        bLength                 8
        bDescriptorType        36
        bDescriptorSubtype     11 (CLOCK_SELECTOR)
        bClockID                1
        bNrInPins               1
        baCSourceID(0)          2
        bmControls           0x00
        iClockSelector          0

Perhaps we also should check if clock selectors are readable and writeable
like we already do for clock sources, but this is out of scope of this
patch.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217601Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20240123134635.54026-1-alexander@tsoy.meSigned-off-by: Takashi Iwai <tiwai@suse.de>

The device fails to initialize otherwise, giving the following error:
[ 3676.671641] usb 2-1.1: 1:1: cannot get freq at ep 0x1
Signed-off-by: Julian Sikorski <belegdol+github@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240123084935.2745-1-belegdol+github@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Customer has reported an issue with specific desktop platform
where two CS42L42 codecs are connected to CS8409 HDA bridge.
If "Master Volume Control" is created then on Ubuntu OS UCM
left/right balance slider in UI audio settings has no effect.
This patch will fix this issue for a target paltform.

Fixes: 20e50772 ("ALSA: hda/cs8409: Add support for dolphin")
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240122184710.5802-1-vitalyr@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Apollo Lake seems to also suffer from IRQ timing issues. After being up for ~4
minutes, a Pentium N4200 system ends up falling back to workqueue-based IRQ
handling:

[  208.019906] snd_hda_intel 0000:00:0e.0: IRQ timing workaround is activated
for card #0. Suggest a bigger bdl_pos_adj.

Unfortunately, the Baytrail and Braswell workaround value of 32 samples isn't
enough to fix the issue here. Default to 64 samples.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240122114512.55808-3-rsalvaterra@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

We have self-explanatory constants for Intel HDA devices, let's use them instead
of magic numbers and code comments.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240122114512.55808-2-rsalvaterra@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge series from Johan Hovold <johan+linaro@kernel.org>:

To reduce the risk of speaker damage the PA gain needs to be limited on
machines like the Lenovo Thinkpad X13s until we have active speaker
protection in place.

Limit the gain to the current default setting provided by the UCM
configuration which most user have so far been using (due to a bug in
the configuration files which prevented hardware volume control [1]).

The wsa883x PA volume control also turned out to be broken, which meant
that the default setting used by UCM configuration is actually the
lowest level (-3 dB). With the codec driver fixed, hardware volume
control also works as expected.

Note that the new wsa884x driver most likely suffers from a similar bug,
I'll send a fix for that once I've got that confirmed.

Included is also a related fix for the LPASS WSA macro driver, which
was changing the digital gain setting behind the back of user space and
which can result in excessive (or too low) digital gain.

There are further Qualcomm codec drivers that similarly appear to
manipulate various gain settings, but on closer inspection it turns out
that they only write back the current settings. Tests reveal that these
writes are indeed needed for any prior updates to take effect (at least
for the WSA and RX macros).

[1] https://github.com/alsa-project/alsa-ucm-conf/pull/382

Merge series from Zhu Ning <zhuning0077@gmail.com>:

    We get some issues regarding crosstalk, THD+N performance and pop
    noise from customer's project.

The UCM configuration for the Lenovo ThinkPad X13s has up until now
been setting the speaker PA volume to the minimum -3 dB when enabling
the speakers, but this does not prevent the user from increasing the
volume further.

Limit the digital gain and PA volumes to a combined -3 dB in the machine
driver to reduce the risk of speaker damage until we have active speaker
protection in place (or higher safe levels have been established).

Note that the PA volume limit cannot be set lower than 0 dB or
PulseAudio gets confused when the first 16 levels all map to -3 dB.

Also note that this will probably need to be generalised using
machine-specific limits, but a common limit should do for now.

Cc:  <stable@vger.kernel.org>	# 6.5
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://msgid.link/r/20240122181819.4038-3-johan+linaro@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Remove the executable bit that was unintentionally turned on.

Fixes: ee09084f ("ASoC: codecs: ES8326: Add chip version flag")
Signed-off-by: Fei Shao <fshao@chromium.org>
Link: https://msgid.link/r/20240122062055.1673597-1-fshao@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Sound card on Qualcomm X1E80100 CRD board will use eight DAIs in one DAI
link, so increase the limit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240117160144.1305127-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Driver does not use any regulator code, so drop redundant include of
regulator/consumer.h header.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240117151208.1219755-3-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Probe calls wcd938x_populate_dt_data() which already prints all the
error cases with dev_err_probe(), so skip the additional dev_err().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240117151208.1219755-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

WCD938x sound codec driver ignores return status of getting regulators
and returns EINVAL instead of EPROBE_DEFER.  If regulator provider
probes after the codec, system is left without probed audio:

  wcd938x_codec audio-codec: wcd938x_probe: Fail to obtain platform data
  wcd938x_codec: probe of audio-codec failed with error -22

Fixes: 16572522 ("ASoC: codecs: wcd938x-sdw: add SoundWire driver")
Cc:  <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240117151208.1219755-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add condition check for cpu dai link initialization for amplifier
codec path, as same pcm id uses for both headset and speaker path
for RENOIR platforms.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://msgid.link/r/20240118143023.1903984-3-venkataprasad.potturu@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Update platform name for various boards based on rembrandt
and renoir platforms.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://msgid.link/r/20240118143023.1903984-2-venkataprasad.potturu@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Set and enable rt5682s codec bclk and lrclk rates when
acp is in slave mode.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://msgid.link/r/20240118143023.1903984-1-venkataprasad.potturu@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

The lowest headphones volume setting does not mute so the leave the TLV
mute flag unset.

This is specifically needed to let the sound server use the lowest gain
setting.

Fixes: c03226ba ("ASoC: codecs: wcd938x: fix dB range for HPHL and HPHR")
Cc:  <stable@vger.kernel.org>      # 6.5
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://msgid.link/r/20240122091130.27463-1-johan+linaro@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>