- 18 Jul, 2014 35 commits
-
-
Aaron Lu authored
commit e8db5d67 upstream. On 05/21/2014 04:22 PM, Aaron Lu wrote: > On 05/21/2014 01:57 PM, Kui Zhang wrote: >> Hello, >> >> I get following error when rmmod thermal. >> >> rmmod thermal >> Killed While dealing with this problem, I found another problem that also results in a kernel crash on thermal module removal: From: Aaron Lu <aaron.lu@intel.com> Date: Wed, 21 May 2014 16:05:38 +0800 Subject: thermal: hwmon: Make the check for critical temp valid consistent We used the tz->ops->get_crit_temp && !tz->ops->get_crit_temp(tz, temp) to decide if we need to create the temp_crit attribute file but we just check if tz->ops->get_crit_temp exists to decide if we need to remove that attribute file. Some ACPI thermal zone doesn't have a valid critical trip point and that would result in removing a non-existent device file on thermal module unload. Signed-off-by:
Aaron Lu <aaron.lu@intel.com> Signed-off-by:
Zhang Rui <rui.zhang@intel.com> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Yasuaki Ishimatsu authored
commit 5a6024f1 upstream. When hot-adding and onlining CPU, kernel panic occurs, showing following call trace. BUG: unable to handle kernel paging request at 0000000000001d08 IP: [<ffffffff8114acfd>] __alloc_pages_nodemask+0x9d/0xb10 PGD 0 Oops: 0000 [#1] SMP ... Call Trace: [<ffffffff812b8745>] ? cpumask_next_and+0x35/0x50 [<ffffffff810a3283>] ? find_busiest_group+0x113/0x8f0 [<ffffffff81193bc9>] ? deactivate_slab+0x349/0x3c0 [<ffffffff811926f1>] new_slab+0x91/0x300 [<ffffffff815de95a>] __slab_alloc+0x2bb/0x482 [<ffffffff8105bc1c>] ? copy_process.part.25+0xfc/0x14c0 [<ffffffff810a3c78>] ? load_balance+0x218/0x890 [<ffffffff8101a679>] ? sched_clock+0x9/0x10 [<ffffffff81105ba9>] ? trace_clock_local+0x9/0x10 [<ffffffff81193d1c>] kmem_cache_alloc_node+0x8c/0x200 [<ffffffff8105bc1c>] copy_process.part.25+0xfc/0x14c0 [<ffffffff81114d0d>] ? trace_buffer_unlock_commit+0x4d/0x60 [<ffffffff81085a80>] ? kthread_create_on_node+0x140/0x140 [<ffffffff8105d0ec>] do_fork+0xbc/0x360 [<ffffffff8105d3b6>] kernel_thread+0x26/0x30 [<ffffffff81086652>] kthreadd+0x2c2/0x300 [<ffffffff81086390>] ? kthread_create_on_cpu+0x60/0x60 [<ffffffff815f20ec>] ret_from_fork+0x7c/0xb0 [<ffffffff81086390>] ? kthread_create_on_cpu+0x60/0x60 In my investigation, I found the root cause is wq_numa_possible_cpumask. All entries of wq_numa_possible_cpumask is allocated by alloc_cpumask_var_node(). And these entries are used without initializing. So these entries have wrong value. When hot-adding and onlining CPU, wq_update_unbound_numa() is called. wq_update_unbound_numa() calls alloc_unbound_pwq(). And alloc_unbound_pwq() calls get_unbound_pool(). In get_unbound_pool(), worker_pool->node is set as follow: 3592 /* if cpumask is contained inside a NUMA node, we belong to that node */ 3593 if (wq_numa_enabled) { 3594 for_each_node(node) { 3595 if (cpumask_subset(pool->attrs->cpumask, 3596 wq_numa_possible_cpumask[node])) { 3597 pool->node = node; 3598 break; 3599 } 3600 } 3601 } But wq_numa_possible_cpumask[node] does not have correct cpumask. So, wrong node is selected. As a result, kernel panic occurs. By this patch, all entries of wq_numa_possible_cpumask are allocated by zalloc_cpumask_var_node to initialize them. And the panic disappeared. Signed-off-by:
Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Reviewed-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Fixes: bce90380 ("workqueue: add wq_numa_tbl_len and wq_numa_possible_cpumask[]") Signed-off-by:
-
Gu Zheng authored
commit 391acf97 upstream. When runing with the kernel(3.15-rc7+), the follow bug occurs: [ 9969.258987] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:586 [ 9969.359906] in_atomic(): 1, irqs_disabled(): 0, pid: 160655, name: python [ 9969.441175] INFO: lockdep is turned off. [ 9969.488184] CPU: 26 PID: 160655 Comm: python Tainted: G A 3.15.0-rc7+ #85 [ 9969.581032] Hardware name: FUJITSU-SV PRIMEQUEST 1800E/SB, BIOS PRIMEQUEST 1000 Series BIOS Version 1.39 11/16/2012 [ 9969.706052] ffffffff81a20e60 ffff8803e941fbd0 ffffffff8162f523 ffff8803e941fd18 [ 9969.795323] ffff8803e941fbe0 ffffffff8109995a ffff8803e941fc58 ffffffff81633e6c [ 9969.884710] ffffffff811ba5dc ffff880405c6b480 ffff88041fdd90a0 0000000000002000 [ 9969.974071] Call Trace: [ 9970.003403] [<ffffffff8162f523>] dump_stack+0x4d/0x66 [ 9970.065074] [<ffffffff8109995a>] __might_sleep+0xfa/0x130 [ 9970.130743] [<ffffffff81633e6c>] mutex_lock_nested+0x3c/0x4f0 [ 9970.200638] [<ffffffff811ba5dc>] ? kmem_cache_alloc+0x1bc/0x210 [ 9970.272610] [<ffffffff81105807>] cpuset_mems_allowed+0x27/0x140 [ 9970.344584] [<ffffffff811b1303>] ? __mpol_dup+0x63/0x150 [ 9970.409282] [<ffffffff811b1385>] __mpol_dup+0xe5/0x150 [ 9970.471897] [<ffffffff811b1303>] ? __mpol_dup+0x63/0x150 [ 9970.536585] [<ffffffff81068c86>] ? copy_process.part.23+0x606/0x1d40 [ 9970.613763] [<ffffffff810bf28d>] ? trace_hardirqs_on+0xd/0x10 [ 9970.683660] [<ffffffff810ddddf>] ? monotonic_to_bootbased+0x2f/0x50 [ 9970.759795] [<ffffffff81068cf0>] copy_process.part.23+0x670/0x1d40 [ 9970.834885] [<ffffffff8106a598>] do_fork+0xd8/0x380 [ 9970.894375] [<ffffffff81110e4c>] ? __audit_syscall_entry+0x9c/0xf0 [ 9970.969470] [<ffffffff8106a8c6>] SyS_clone+0x16/0x20 [ 9971.030011] [<ffffffff81642009>] stub_clone+0x69/0x90 [ 9971.091573] [<ffffffff81641c29>] ? system_call_fastpath+0x16/0x1b The cause is that cpuset_mems_allowed() try to take mutex_lock(&callback_mutex) under the rcu_read_lock(which was hold in __mpol_dup()). And in cpuset_mems_allowed(), the access to cpuset is under rcu_read_lock, so in __mpol_dup, we can reduce the rcu_read_lock protection region to protect the access to cpuset only in current_cpuset_is_being_rebound(). So that we can avoid this bug. This patch is a temporary solution that just addresses the bug mentioned above, can not fix the long-standing issue about cpuset.mems rebinding on fork(): "When the forker's task_struct is duplicated (which includes ->mems_allowed) and it races with an update to cpuset_being_rebound in update_tasks_nodemask() then the task's mems_allowed doesn't get updated. And the child task's mems_allowed can be wrong if the cpuset's nodemask changes before the child has been added to the cgroup's tasklist." Signed-off-by:
Gu Zheng <guz.fnst@cn.fujitsu.com> Acked-by:
Li Zefan <lizefan@huawei.com> Signed-off-by:
-
Maxime Bizon authored
commit bddbceb6 upstream. Uevents are suppressed during attributes registration, but never restored, so kobject_uevent() does nothing. Signed-off-by:
Maxime Bizon <mbizon@freebox.fr> Signed-off-by:
-
Jan Kardell authored
commit baa3c652 upstream. Since AI lines could be selected at will (linux-3.11) the sending and receiving ends of the FIFO does not agree about what step is used for a line. It only works if the last lines are used, like 5,6,7, and fails if ie 2,4,6 is selected in DT. Signed-off-by:
Jan Kardell <jan.kardell@telliq.com> Tested-by:
Zubair Lutfullah <zubair.lutfullah@gmail.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Michal Sojka authored
commit d8279a40 upstream. This adds support for Infineon TriBoard TC1798 [1]. Only interface 1 is used as serial line (see [2], Figure 8-6). [1] http://www.infineon.com/cms/de/product/microcontroller/development-tools-software-and-kits/tricore-tm-development-tools-software-and-kits/starterkits-and-evaluation-boards/starter-kit-tc1798/channel.html?channel=db3a304333b8a7ca0133cfa3d73e4268 [2] http://www.infineon.com/dgdl/TriBoardManual-TC1798-V10.pdf?folderId=db3a304412b407950112b409ae7c0343&fileId=db3a304333b8a7ca0133cfae99fe426aSigned-off-by:
Michal Sojka <sojkam1@fel.cvut.cz> Cc: Johan Hovold <johan@kernel.org> Signed-off-by:
-
Bert Vermeulen authored
commit 5a7fbe7e upstream. This patch adds PID 0x0003 to the VID 0x128d (Testo). At least the Testo 435-4 uses this, likely other gear as well. Signed-off-by:
Bert Vermeulen <bert@biot.com> Cc: Johan Hovold <johan@kernel.org> Signed-off-by:
-
Andras Kovacs authored
commit b9326057 upstream. Corsair USB Dongles are shipped with Corsair AXi series PSUs. These are cp210x serial usb devices, so make driver detect these. I have a program, that can get information from these PSUs. Tested with 2 different dongles shipped with Corsair AX860i and AX1200i units. Signed-off-by:
Andras Kovacs <andras@sth.sze.hu> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Bernd Wachter authored
commit 3d28bd84 upstream. Add ID of the Telewell 4G v2 hardware to option driver to get legacy serial interface working Signed-off-by:
Bernd Wachter <bernd.wachter@jolla.com> Signed-off-by:
-
Hugh Dickins authored
commit d05f0cdc upstream. In v2.6.34 commit 9d8cebd4 ("mm: fix mbind vma merge problem") introduced vma merging to mbind(), but it should have also changed the convention of passing start vma from queue_pages_range() (formerly check_range()) to new_vma_page(): vma merging may have already freed that structure, resulting in BUG at mm/mempolicy.c:1738 and probably worse crashes. Fixes: 9d8cebd4 ("mm: fix mbind vma merge problem") Reported-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Tested-by:
Hugh Dickins <hughd@google.com> Acked-by:
Christoph Lameter <cl@linux.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Mikulas Patocka authored
commit fd1232b2 upstream. This patch fixes I/O errors with the sym53c8xx_2 driver when the disk returns QUEUE FULL status. When the controller encounters an error (including QUEUE FULL or BUSY status), it aborts all not yet submitted requests in the function sym_dequeue_from_squeue. This function aborts them with DID_SOFT_ERROR. If the disk has full tag queue, the request that caused the overflow is aborted with QUEUE FULL status (and the scsi midlayer properly retries it until it is accepted by the disk), but the sym53c8xx_2 driver aborts the following requests with DID_SOFT_ERROR --- for them, the midlayer does just a few retries and then signals the error up to sd. The result is that disk returning QUEUE FULL causes request failures. The error was reproduced on 53c895 with COMPAQ BD03685A24 disk (rebranded ST336607LC) with command queue 48 or 64 tags. The disk has 64 tags, but under some access patterns it return QUEUE FULL when there are less than 64 pending tags. The SCSI specification allows returning QUEUE FULL anytime and it is up to the host to retry. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: Matthew Wilcox <matthew@wil.cx> Cc: James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Sander Eikelenboom authored
commit b7a77235 upstream. This (widely used) construction: if(printk_ratelimit()) dev_dbg() Causes the ratelimiting to spam the kernel log with the "callbacks suppressed" message below, even while the dev_dbg it is supposed to rate limit wouldn't print anything because DEBUG is not defined for this device. [ 533.803964] retire_playback_urb: 852 callbacks suppressed [ 538.807930] retire_playback_urb: 852 callbacks suppressed [ 543.811897] retire_playback_urb: 852 callbacks suppressed [ 548.815745] retire_playback_urb: 852 callbacks suppressed [ 553.819826] retire_playback_urb: 852 callbacks suppressed So use dev_dbg_ratelimited() instead of this construction. Signed-off-by:
Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Tim Gardner authored
commit a5065eb6 upstream. BugLink: http://bugs.launchpad.net/bugs/1305133 Malfunctioning or slow devices can cause a flood of dmesg SPAM. I've ignored checkpatch.pl complaints about the use of printk_ratelimit() in favour of prior art in sound/usb/pcm.c. WARNING: Prefer printk_ratelimited or pr_<level>_ratelimited to printk_ratelimit + if (printk_ratelimit() && Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Eldad Zack <eldad@fogrefinery.com> Cc: Daniel Mack <zonque@gmail.com> Cc: Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Signed-off-by:
-
Micky Ching authored
commit 5027251e upstream. a27fbf2f ("mmc: add ignorance case for CMD13 CRC error") produced a cmd.flags unhandled in realtek pci host driver. This will make MMC card fail to initialize, this patch is used to handle the new cmd.flags condition and MMC card can be used. Signed-off-by:
Micky Ching <micky_ching@realsil.com.cn> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Chris Ball <chris@printf.net> Signed-off-by:
-
Peter Hurley authored
commit 66528f90 upstream. If INPCK is not set, input parity detection should be disabled. This means parity errors should not be received from the tty driver, and the data received should be treated normally. SUS v3, 11.2.2, General Terminal Interface - Input Modes, states: "If INPCK is set, input parity checking shall be enabled. If INPCK is not set, input parity checking shall be disabled, allowing output parity generation without input parity errors. Note that whether input parity checking is enabled or disabled is independent of whether parity detection is enabled or disabled (see Control Modes). If parity detection is enabled but input parity checking is disabled, the hardware to which the terminal is connected shall recognize the parity bit, but the terminal special file shall not check whether or not this bit is correctly set." Ignore parity errors reported by the tty driver when INPCK is not set, and handle the received data normally. Fixes: Bugzilla #71681, 'Improvement of n_tty_receive_parity_error from n_tty.c' Reported-by:
Ivan <athlon_@mail.ru> Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
-
Peter Hurley authored
commit ef8b9ddc upstream. If IGNBRK is set without either BRKINT or PARMRK set, some uart drivers send a 0x00 byte for BREAK without the TTYBREAK flag to the line discipline, when it should send either nothing or the TTYBREAK flag set. This happens because the read_status_mask masks out the BI condition, which uart_insert_char() then interprets as a normal 0x00 byte. SUS v3 is clear regarding the meaning of IGNBRK; Section 11.2.2, General Terminal Interface - Input Modes, states: "If IGNBRK is set, a break condition detected on input shall be ignored; that is, not put on the input queue and therefore not read by any process." Fix read_status_mask to include the BI bit if IGNBRK is set; the lsr status retains the BI bit if a BREAK is recv'd, which is subsequently ignored in uart_insert_char() when masked with the ignore_status_mask. Affected drivers: 8250 - all serial_txx9 mfd amba-pl010 amba-pl011 atmel_serial bfin_uart dz ip22zilog max310x mxs-auart netx-serial pnx8xxx_uart pxa sb1250-duart sccnxp serial_ks8695 sirfsoc_uart st-asc vr41xx_siu zs sunzilog fsl_lpuart sunsab ucc_uart bcm63xx_uart sunsu efm32-uart pmac_zilog mpsc msm_serial m32r_sio Unaffected drivers: omap-serial rp2 sa1100 imx icom Annotated for fixes: altera_uart mcf Drivers without break detection: 21285 xilinx-uartps altera_jtaguart apbuart arc-uart clps711x max3100 uartlite msm_serial_hs nwpserial lantiq vt8500_serial Unknown: samsung mpc52xx_uart bfin_sport_uart cpm_uart/core Fixes: Bugzilla #71651, '8250_core.c incorrectly handles IGNBRK flag' Reported-by:
-
Michal Nazarewicz authored
commit dc78327c upstream. With a kernel configured with ARM64_64K_PAGES && !TRANSPARENT_HUGEPAGE, the following is triggered at early boot: SMP: Total of 8 processors activated. devtmpfs: initialized Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = fffffe0000050000 [00000008] *pgd=00000043fba00003, *pmd=00000043fba00003, *pte=00e0000078010407 Internal error: Oops: 96000006 [#1] SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-rc864k+ #44 task: fffffe03bc040000 ti: fffffe03bc080000 task.ti: fffffe03bc080000 PC is at __list_add+0x10/0xd4 LR is at free_one_page+0x270/0x638 ... Call trace: __list_add+0x10/0xd4 free_one_page+0x26c/0x638 __free_pages_ok.part.52+0x84/0xbc __free_pages+0x74/0xbc init_cma_reserved_pageblock+0xe8/0x104 cma_init_reserved_areas+0x190/0x1e4 do_one_initcall+0xc4/0x154 kernel_init_freeable+0x204/0x2a8 kernel_init+0xc/0xd4 This happens because init_cma_reserved_pageblock() calls __free_one_page() with pageblock_order as page order but it is bigger than MAX_ORDER. This in turn causes accesses past zone->free_list[]. Fix the problem by changing init_cma_reserved_pageblock() such that it splits pageblock into individual MAX_ORDER pages if pageblock is bigger than a MAX_ORDER page. In cases where !CONFIG_HUGETLB_PAGE_SIZE_VARIABLE, which is all architectures expect for ia64, powerpc and tile at the moment, the âpageblock_order > MAX_ORDERâ condition will be optimised out since both sides of the operator are constants. In cases where pageblock size is variable, the performance degradation should not be significant anyway since init_cma_reserved_pageblock() is called only at boot time at most MAX_CMA_AREAS times which by default is eight. Signed-off-by:
Michal Nazarewicz <mina86@mina86.com> Reported-by:
Mark Salter <msalter@redhat.com> Tested-by:
Christopher Covington <cov@codeaurora.org> Cc: Mel Gorman <mgorman@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Thomas Gleixner authored
commit 4f436603 upstream. The ras3 block on spear320 claims to have 3 interrupts. In fact it has one and 6 reserved interrupts. Account the 6 reserved to this block so it has 7 interrupts total. That matches the datasheet and the device tree entries. Broken since commit 80515a5a(ARM: SPEAr3xx: shirq: simplify and move the shared irq multiplexor to DT). Testing is overrated.... Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20140619212712.872379208@linutronix.de Fixes: 80515a5a ('ARM: SPEAr3xx: shirq: simplify and move the shared irq multiplexor to DT') Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Jason Cooper <jason@lakedaemon.net> Signed-off-by:
-
NeilBrown authored
commit 133d4527 upstream. When we write to a degraded array which has a bitmap, we make sure the relevant bit in the bitmap remains set when the write completes (so a 're-add' can quickly rebuilt a temporarily-missing device). If, immediately after such a write starts, we incorporate a spare, commence recovery, and skip over the region where the write is happening (because the 'needs recovery' flag isn't set yet), then that write will not get to the new device. Once the recovery finishes the new device will be trusted, but will have incorrect data, leading to possible corruption. We cannot set the 'needs recovery' flag when we start the write as we do not know easily if the write will be "degraded" or not. That depends on details of the particular raid level and particular write request. This patch fixes a corruption issue of long standing and so it suitable for any -stable kernel. It applied correctly to 3.0 at least and will minor editing to earlier kernels. Reported-by:
Bill <billstuff2001@sbcglobal.net> Tested-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 099ed151 upstream. Disabling reading and writing to the trace file should not be able to disable all function tracing callbacks. There's other users today (like kprobes and perf). Reading a trace file should not stop those from happening. Reviewed-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Michal Nazarewicz authored
commit f35f7124 upstream. It appears that no one ever run ffs-test on a big-endian machine, since it used cpu-endianess for fs_count and hs_count fields which should be in little-endian format. Fix by wrapping the numbers in cpu_to_le32. Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
J. Bruce Fields authored
commit 76f47128 upstream. An NFS operation that creates a new symlink includes the symlink data, which is xdr-encoded as a length followed by the data plus 0 to 3 bytes of zero-padding as required to reach a 4-byte boundary. The vfs, on the other hand, wants null-terminated data. The simple way to handle this would be by copying the data into a newly allocated buffer with space for the final null. The current nfsd_symlink code tries to be more clever by skipping that step in the (likely) case where the byte following the string is already 0. But that assumes that the byte following the string is ours to look at. In fact, it might be the first byte of a page that we can't read, or of some object that another task might modify. Worse, the NFSv4 code tries to fix the problem by actually writing to that byte. In the NFSv2/v3 cases this actually appears to be safe: - nfs3svc_decode_symlinkargs explicitly null-terminates the data (after first checking its length and copying it to a new page). - NFSv2 limits symlinks to 1k. The buffer holding the rpc request is always at least a page, and the link data (and previous fields) have maximum lengths that prevent the request from reaching the end of a page. In the NFSv4 case the CREATE op is potentially just one part of a long compound so can end up on the end of a page if you're unlucky. The minimal fix here is to copy and null-terminate in the NFSv4 case. The nfsd_symlink() interface here seems too fragile, though. It should really either do the copy itself every time or just require a null-terminated string. Reported-by:
Jeff Layton <jlayton@primarydata.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Adam Thomson authored
commit a2c12493 upstream. Currently in the inkern.c code for IIO framework, the function of_iio_channel_get_by_name() will return a non-NULL pointer when it cannot find a channel using of_iio_channel_get() and when it tries to search for 'io-channel-ranges' property and fails. This is incorrect behaviour as the function which calls this expects a NULL pointer for failure. This patch rectifies the issue. Signed-off-by:
Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by:
-
Paolo Bonzini authored
commit 7cb060a9 upstream. KVM does not really do much with the PAT, so this went unnoticed for a long time. It is exposed however if you try to do rdmsr on the PAT register. Reported-by:
Valentine Sinitsyn <valentine.sinitsyn@gmail.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Nadav Amit authored
commit 682367c4 upstream. Recent Intel CPUs have 10 variable range MTRRs. Since operating systems sometime make assumptions on CPUs while they ignore capability MSRs, it is better for KVM to be consistent with recent CPUs. Reporting more MTRRs than actually supported has no functional implications. Signed-off-by:
Nadav Amit <namit@cs.technion.ac.il> Signed-off-by:
-
Jan Kara authored
commit a93cd4cf upstream. Hole punching code for files with indirect blocks wrongly computed number of blocks which need to be cleared when traversing the indirect block tree. That could result in punching more blocks than actually requested and thus effectively cause a data loss. For example: fallocate -n -p 10240000 4096 will punch the range 10240000 - 12632064 instead of the range 1024000 - 10244096. Fix the calculation. Fixes: 8bad6fc8Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Jan Kara authored
commit c5c7b8dd upstream. Error recovery in ext4_alloc_branch() calls ext4_forget() even for buffer corresponding to indirect block it did not allocate. This leads to brelse() being called twice for that buffer (once from ext4_forget() and once from cleanup in ext4_ind_map_blocks()) leading to buffer use count misaccounting. Eventually (but often much later because there are other users of the buffer) we will see messages like: VFS: brelse: Trying to free free buffer Another manifestation of this problem is an error: JBD2 unexpected failure: jbd2_journal_revoke: !buffer_revoked(bh); inconsistent data on disk The fix is easy - don't forget buffer we did not allocate. Also add an explanatory comment because the indexing at ext4_alloc_branch() is somewhat subtle. Signed-off-by:
-
Tejun Heo authored
commit a5049a8a upstream. Hello, So, this patch should do. Joe, Vivek, can one of you guys please verify that the oops goes away with this patch? Jens, the original thread can be read at http://thread.gmane.org/gmane.linux.kernel/1720729 The fix converts blkg->refcnt from int to atomic_t. It does some overhead but it should be minute compared to everything else which is going on and the involved cacheline bouncing, so I think it's highly unlikely to cause any noticeable difference. Also, the refcnt in question should be converted to a perpcu_ref for blk-mq anyway, so the atomic_t is likely to go away pretty soon anyway. Thanks. ------- 8< ------- __blkg_release_rcu() may be invoked after the associated request_queue is released with a RCU grace period inbetween. As such, the function and callbacks invoked from it must not dereference the associated request_queue. This is clearly indicated in the comment above the function. Unfortunately, while trying to fix a different issue, 2a4fd070 ("blkcg: move bulk of blkcg_gq release operations to the RCU callback") ignored this and added [un]locking of @blkg->q->queue_lock to __blkg_release_rcu(). This of course can cause oops as the request_queue may be long gone by the time this code gets executed. general protection fault: 0000 [#1] SMP CPU: 21 PID: 30 Comm: rcuos/21 Not tainted 3.15.0 #1 Hardware name: Stratus ftServer 6400/G7LAZ, BIOS BIOS Version 6.3:57 12/25/2013 task: ffff880854021de0 ti: ffff88085403c000 task.ti: ffff88085403c000 RIP: 0010:[<ffffffff8162e9e5>] [<ffffffff8162e9e5>] _raw_spin_lock_irq+0x15/0x60 RSP: 0018:ffff88085403fdf0 EFLAGS: 00010086 RAX: 0000000000020000 RBX: 0000000000000010 RCX: 0000000000000000 RDX: 000060ef80008248 RSI: 0000000000000286 RDI: 6b6b6b6b6b6b6b6b RBP: ffff88085403fdf0 R08: 0000000000000286 R09: 0000000000009f39 R10: 0000000000020001 R11: 0000000000020001 R12: ffff88103c17a130 R13: ffff88103c17a080 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88107fca0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000006e5ab8 CR3: 000000000193d000 CR4: 00000000000407e0 Stack: ffff88085403fe18 ffffffff812cbfc2 ffff88103c17a130 0000000000000000 ffff88103c17a130 ffff88085403fec0 ffffffff810d1d28 ffff880854021de0 ffff880854021de0 ffff88107fcaec58 ffff88085403fe80 ffff88107fcaec30 Call Trace: [<ffffffff812cbfc2>] __blkg_release_rcu+0x72/0x150 [<ffffffff810d1d28>] rcu_nocb_kthread+0x1e8/0x300 [<ffffffff81091d81>] kthread+0xe1/0x100 [<ffffffff8163813c>] ret_from_fork+0x7c/0xb0 Code: ff 47 04 48 8b 7d 08 be 00 02 00 00 e8 55 48 a4 ff 5d c3 0f 1f 00 66 66 66 66 90 55 48 89 e5 +fa 66 66 90 66 66 90 b8 00 00 02 00 <f0> 0f c1 07 89 c2 c1 ea 10 66 39 c2 75 02 5d c3 83 e2 fe 0f +b7 RIP [<ffffffff8162e9e5>] _raw_spin_lock_irq+0x15/0x60 RSP <ffff88085403fdf0> The request_queue locking was added because blkcg_gq->refcnt is an int protected with the queue lock and __blkg_release_rcu() needs to put the parent. Let's fix it by making blkcg_gq->refcnt an atomic_t and dropping queue locking in the function. Given the general heavy weight of the current request_queue and blkcg operations, this is unlikely to cause any noticeable overhead. Moreover, blkcg_gq->refcnt is likely to be converted to percpu_ref in the near future, so whatever (most likely negligible) overhead it may add is temporary. Signed-off-by:
Joe Lawrence <joe.lawrence@stratus.com> Acked-by:
Vivek Goyal <vgoyal@redhat.com> Link: http://lkml.kernel.org/g/alpine.DEB.2.02.1406081816540.17948@jlaw-desktop.mno.stratus.comSigned-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Steve French authored
commit ce36d9ab upstream. When we SMB3 mounted with mapchars (to allow reserved characters : \ / > < * ? via the Unicode Windows to POSIX remap range) empty paths (eg when we open "" to query the root of the SMB3 directory on mount) were not null terminated so we sent garbarge as a path name on empty paths which caused SMB2/SMB2.1/SMB3 mounts to fail when mapchars was specified. mapchars is particularly important since Unix Extensions for SMB3 are not supported (yet) Signed-off-by:
Steve French <smfrench@gmail.com> Reviewed-by:
David Disseldorp <ddiss@suse.de> Signed-off-by:
-
Rafał Miłecki authored
commit 2fc68eb1 upstream. Support for firmware rev 508+ was added years ago, but we never noticed it reports channel in a different way for G-PHY devices. Instead of offset from 2400 MHz it simply passes channel id (AKA hw_value). So far it was (most probably) affecting monitor mode users only, but the following recent commit made it noticeable for quite everybody: commit 3afc2167 Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Date: Tue Mar 4 16:50:13 2014 +0200 cfg80211/mac80211: ignore signal if the frame was heard on wrong channel Reported-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Tested-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Maxime Ripard authored
commit b9111328 upstream. If the mdio probe function fails in emac_open, the interrupt we just requested isn't freed. If emac_open is called again, for example because we try to set up the interface again, the kernel will oops because the interrupt wasn't properly released. Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
ChiaHao authored
commit 3906c2b5 upstream. The value of ESR has been stored into x1, and should be directly pass to do_sp_pc_abort function, "MOV x1, x25" is an extra operation and do_sp_pc_abort will get the wrong value of ESR. Signed-off-by:
ChiaHao <andy.jhshiu@gmail.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
David R. Piegdon authored
commit c021f241 upstream. Fix a parser-bug in the omap2 muxing code where muxtable-entries will be wrongly selected if the requested muxname is a *prefix* of their m0-entry and they have a matching mN-entry. Fix by additionally checking that the length of the m0_entry is equal. For example muxing of "dss_data2.dss_data2" on omap32xx will fail because the prefix "dss_data2" will match the mux-entries "dss_data2" as well as "dss_data20", with the suffix "dss_data2" matching m0 (for dss_data2) and m4 (for dss_data20). Thus both are recognized as signal path candidates: Relevant muxentries from mux34xx.c: _OMAP3_MUXENTRY(DSS_DATA20, 90, "dss_data20", NULL, "mcspi3_somi", "dss_data2", "gpio_90", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(DSS_DATA2, 72, "dss_data2", NULL, NULL, NULL, "gpio_72", NULL, NULL, "safe_mode"), This will result in a failure to mux the pin at all: _omap_mux_get_by_name: Multiple signal paths (2) for dss_data2.dss_data2 Patch should apply to linus' latest master down to rather old linux-2.6 trees. Signed-off-by:
David R. Piegdon <lkml@p23q.org> Cc: stable@vger.kernel.org [tony@atomide.com: updated description to include full description] Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Steve Capper authored
commit 923b8f50 upstream. The __sync_icache_dcache routine will only flush the dcache for the first page of a compound page, potentially leading to stale icache data residing further on in a hugetlb page. This patch addresses this issue by taking into consideration the order of the page when flushing the dcache. Reported-by:
Mark Brown <broonie@linaro.org> Tested-by:
Steve Capper <steve.capper@linaro.org> Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
David Rientjes authored
commit 7cd2b0a3 upstream. Oleg reports a division by zero error on zero-length write() to the percpu_pagelist_fraction sysctl: divide error: 0000 [#1] SMP DEBUG_PAGEALLOC CPU: 1 PID: 9142 Comm: badarea_io Not tainted 3.15.0-rc2-vm-nfs+ #19 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff8800d5aeb6e0 ti: ffff8800d87a2000 task.ti: ffff8800d87a2000 RIP: 0010: percpu_pagelist_fraction_sysctl_handler+0x84/0x120 RSP: 0018:ffff8800d87a3e78 EFLAGS: 00010246 RAX: 0000000000000f89 RBX: ffff88011f7fd000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000010 RBP: ffff8800d87a3e98 R08: ffffffff81d002c8 R09: ffff8800d87a3f50 R10: 000000000000000b R11: 0000000000000246 R12: 0000000000000060 R13: ffffffff81c3c3e0 R14: ffffffff81cfddf8 R15: ffff8801193b0800 FS: 00007f614f1e9740(0000) GS:ffff88011f440000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f614f1fa000 CR3: 00000000d9291000 CR4: 00000000000006e0 Call Trace: proc_sys_call_handler+0xb3/0xc0 proc_sys_write+0x14/0x20 vfs_write+0xba/0x1e0 SyS_write+0x46/0xb0 tracesys+0xe1/0xe6 However, if the percpu_pagelist_fraction sysctl is set by the user, it is also impossible to restore it to the kernel default since the user cannot write 0 to the sysctl. This patch allows the user to write 0 to restore the default behavior. It still requires a fraction equal to or larger than 8, however, as stated by the documentation for sanity. If a value in the range [1, 7] is written, the sysctl will return EINVAL. This successfully solves the divide by zero issue at the same time. Signed-off-by:
David Rientjes <rientjes@google.com> Reported-by:
Oleg Drokin <green@linuxhacker.ru> Signed-off-by:
-
- 17 Jul, 2014 5 commits
-
-
Emmanuel Grumbach authored
commit 501fd989 upstream. Some races with the hardware can happen when we take ownership of the device. Don't give up after the first try. Reviewed-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Felix Fietkau authored
commit 53d04525 upstream. If the rate control algorithm uses a selection table, it is leaked when the station is destroyed - fix that. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Reported-by:
Christophe Prévotaux <cprevotaux@nltinc.com> Fixes: 0d528d85 ("mac80211: improve the rate control API") [add commit log entry, remove pointless NULL check] Signed-off-by:
-
Arik Nemtsov authored
commit 923eaf36 upstream. Doing so will lead to an oops for a p2p-dev interface, since it has no netdev. Signed-off-by:
Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by:
-
Krzysztof Hałasa authored
commit c7d37a66 upstream. Without this fix, freshly rebooted Linux creates a new IBSS instead of joining an existing one. Only when jiffies counter overflows after 5 minutes the IBSS can be successfully joined. Signed-off-by:
Krzysztof Hałasa <khalasa@piap.pl> [edit commit message slightly] Signed-off-by:
-
Fabio Baltieri authored
commit c0214f98 upstream. All devices supported by ina2xx are bidirectional and report the measured shunt voltage and power values as a signed 16 bit, but the current driver implementation caches all registers as u16, leading to an incorrect sign extension when reporting to userspace in ina2xx_get_value(). This patch fixes the problem by casting the signed registers to s16. Tested on an INA219. Signed-off-by:
Fabio Baltieri <fabio.baltieri@gmail.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
