Pull networking fixes from David Miller:

 1) The bnx2x can hang if you give it a GSO packet with a segment size
    which is too big for the hardware, detect and drop in this case.
    From Daniel Axtens.

 2) Fix some overflows and pointer leaks in xtables, from Dmitry Vyukov.

 3) Missing RCU locking in igmp, from Eric Dumazet.

 4) Fix RX checksum handling on r8152, it can only checksum UDP and TCP
    packets. From Hayes Wang.

 5) Minor pacing tweak to TCP BBR congestion control, from Neal
    Cardwell.

 6) Missing RCU annotations in cls_u32, from Paolo Abeni.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (30 commits)
  Revert "defer call to mem_cgroup_sk_alloc()"
  soreuseport: fix mem leak in reuseport_add_sock()
  net: qlge: use memmove instead of skb_copy_to_linear_data
  net: qed: use correct strncpy() size
  net: cxgb4: avoid memcpy beyond end of source buffer
  cls_u32: add missing RCU annotation.
  r8152: set rx mode early when linking on
  r8152: fix wrong checksum status for received IPv4 packets
  nfp: fix TLV offset calculation
  net: pxa168_eth: add netconsole support
  net: igmp: add a missing rcu locking section
  ibmvnic: fix firmware version when no firmware level has been provided by the VIOS server
  vmxnet3: remove redundant initialization of pointer 'rq'
  lan78xx: remove redundant initialization of pointer 'phydev'
  net: jme: remove unused initialization of 'rxdesc'
  rtnetlink: remove check for IFLA_IF_NETNSID
  rocker: fix possible null pointer dereference in rocker_router_fib_event_work
  inet: Avoid unitialized variable warning in inet_unhash()
  net: bridge: Fix uninitialized error in br_fdb_sync_static()
  openvswitch: Remove padding from packet before L3+ conntrack processing
  ...

Pull GFS2 fixes from Bob Peterson:
 "Andreas Gruenbacher wrote two additional patches that we would like
  merged in this time. Both are regressions:

   - fix another kernel build dependency problem

   - fix a performance regression in glock dumps"

* tag 'gfs2-4.16.fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Glock dump performance regression fix
  gfs2: Fix the crc32c dependency

Pull second set of SCSI updates from James Bottomley:
 "This is a set of three patches that depended on mq and zone changes in
  the block tree (now upstream)"

* tag 'scsi-postmerge' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sd: Remove zone write locking
  scsi: sd_zbc: Initialize device request queue zoned data
  scsi: scsi-mq-debugfs: Show more information

Merge tag 'linux-kselftest-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest updates from Shuah Khan:
 "This update to Kselftest consists of fixes, cleanups, and SPDX license
  additions"

* tag 'linux-kselftest-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: vm: update .gitignore with missing generated file
  selftests/x86: Add <test_name>{,_32,_64} targets
  selftests: Fix loss of test output in run_kselftests.sh
  selftest: ftrace: Fix to add 256 kprobe events correctly
  selftest: ftrace: Fix to pick text symbols for kprobes
  selftests: media_tests: Add SPDX license identifier
  selftests: kselftest.h: Add SPDX license identifier
  selftests: kselftest_install.sh: Add SPDX license identifier
  selftests: gen_kselftest_tar.h: Add SPDX license identifier
  selftests: media_tests: Fix Makefile 'clean' target warning
  tools/testing: Fix trailing semicolon
  kselftest: fix OOM in memory compaction test
  selftests: seccomp: fix compile error seccomp_bpf

When pulling the recent pinctrl merge, I was surprised by how a
pinctrl-only pull request ended up rebuilding basically the whole
kernel.

The reason for that ended up being that <linux/device.h> included
<linux/pinctrl/devinfo.h>, so any change to that file ended up causing
pretty much every driver out there to be rebuilt.

The reason for that was because 'struct device' has this in it:

    #ifdef CONFIG_PINCTRL
        struct dev_pin_info     *pins;
    #endif

but we already avoid header includes for these kinds of things in that
header file, preferring to just use a forward-declaration of the
structure instead.  Exactly to avoid this kind of header dependency.

Since some drivers seem to expect that <linux/pinctrl/devinfo.h> header
to come in automatically, move the include to <linux/pinctrl/pinctrl.h>
instead.  It might be better to just make the includes more targeted,
but I'm not going to review every driver.

It would definitely be good to have a tool for finding and minimizing
header dependencies automatically - or at least help with them.  Right
now we almost certainly end up having way too many of these things, and
it's hard to test every single configuration.

FWIW, you can get a sense of the "hotness" of a header file with something
like this after doing a full build:

    find . -name '.*.o.cmd' -print0 |
        xargs -0 tail --lines=+2 |
        grep -v 'wildcard ' |
        tr ' \\' '\n' |
        sort | uniq -c | sort -n | less -S

which isn't exact (there are other things in those '*.o.cmd' than just
the dependencies, and the "--lines=+2" only removes the header), but
might a useful approximation.

With this patch, <linux/pinctrl/devinfo.h> drops to "only" having 833
users in the current x86-64 allmodconfig.  In contrast, <linux/device.h>
has 14857 build files including it directly or indirectly.

Of course, the headers that absolutely _everybody_ includes (things like
<linux/types.h> etc) get a score of 23000+.

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch effectively reverts commit 9f1c2674 ("net: memcontrol:
defer call to mem_cgroup_sk_alloc()").

Moving mem_cgroup_sk_alloc() to the inet_csk_accept() completely breaks
memcg socket memory accounting, as packets received before memcg
pointer initialization are not accounted and are causing refcounting
underflow on socket release.

Actually the free-after-use problem was fixed by
commit c0576e39 ("net: call cgroup_sk_alloc() earlier in
sk_clone_lock()") for the cgroup pointer.

So, let's revert it and call mem_cgroup_sk_alloc() just before
cgroup_sk_alloc(). This is safe, as we hold a reference to the socket
we're cloning, and it holds a reference to the memcg.

Also, let's drop BUG_ON(mem_cgroup_is_root()) check from
mem_cgroup_sk_alloc(). I see no reasons why bumping the root
memcg counter is a good reason to panic, and there are no realistic
ways to hit it.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

reuseport_add_sock() needs to deal with attaching a socket having
its own sk_reuseport_cb, after a prior
setsockopt(SO_ATTACH_REUSEPORT_?BPF)

Without this fix, not only a WARN_ONCE() was issued, but we were also
leaking memory.

Thanks to sysbot and Eric Biggers for providing us nice C repros.

------------[ cut here ]------------
socket already in reuseport group
WARNING: CPU: 0 PID: 3496 at net/core/sock_reuseport.c:119  
reuseport_add_sock+0x742/0x9b0 net/core/sock_reuseport.c:117
Kernel panic - not syncing: panic_on_warn set ...

CPU: 0 PID: 3496 Comm: syzkaller869503 Not tainted 4.15.0-rc6+ #245
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS  
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:17 [inline]
  dump_stack+0x194/0x257 lib/dump_stack.c:53
  panic+0x1e4/0x41c kernel/panic.c:183
  __warn+0x1dc/0x200 kernel/panic.c:547
  report_bug+0x211/0x2d0 lib/bug.c:184
  fixup_bug.part.11+0x37/0x80 arch/x86/kernel/traps.c:178
  fixup_bug arch/x86/kernel/traps.c:247 [inline]
  do_error_trap+0x2d7/0x3e0 arch/x86/kernel/traps.c:296
  do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315
  invalid_op+0x22/0x40 arch/x86/entry/entry_64.S:1079

Fixes: ef456144 ("soreuseport: define reuseport groups")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+c0ea2226f77a42936bf7@syzkaller.appspotmail.com
Acked-by: Craig Gallek <kraig@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

gcc-8 points out that the skb_copy_to_linear_data() argument points to
the skb itself, which makes it run into a problem with overlapping
memcpy arguments:

In file included from include/linux/ip.h:20,
                 from drivers/net/ethernet/qlogic/qlge/qlge_main.c:26:
drivers/net/ethernet/qlogic/qlge/qlge_main.c: In function 'ql_realign_skb':
include/linux/skbuff.h:3378:2: error: 'memcpy' source argument is the same as destination [-Werror=restrict]
  memcpy(skb->data, from, len);

It's unclear to me what the best solution is, maybe it ought to use a
different helper that adjusts the skb data in a safe way. Simply using
memmove() here seems like the easiest workaround.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

passing the strlen() of the source string as the destination
length is pointless, and gcc-8 now warns about it:

drivers/net/ethernet/qlogic/qed/qed_debug.c: In function 'qed_grc_dump':
include/linux/string.h:253: error: 'strncpy' specified bound depends on the length of the source argument [-Werror=stringop-overflow=]

This changes qed_grc_dump_big_ram() to instead uses the length of
the destination buffer, and use strscpy() to guarantee nul-termination.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Building with link-time-optimizations revealed that the cxgb4 driver does
a fixed-size memcpy() from a variable-length constant string into the
network interface name:

In function 'memcpy',
    inlined from 'cfg_queues_uld.constprop' at drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:335:2,
    inlined from 'cxgb4_register_uld.constprop' at drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:719:9:
include/linux/string.h:350:3: error: call to '__read_overflow2' declared with attribute error: detected read beyond size of object passed as 2nd parameter
   __read_overflow2();
   ^

I can see two equally workable solutions: either we use a strncpy() instead
of the memcpy() to stop at the end of the input, or we make the source buffer
fixed length as well. This implements the latter.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

In a couple of points of the control path, n->ht_down is currently
accessed without the required RCU annotation. The accesses are
safe, but sparse complaints. Since we already held the
rtnl lock, let use rtnl_dereference().

Fixes: a1b7c5fd ("net: sched: add cls_u32 offload hooks for netdevs")
Fixes: de5df632 ("net: sched: cls_u32 changes to knode must appear atomic to readers")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Hayes Wang says:

====================
r8152: fix rx issues

The two patched are used to fix rx issues.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Set rx mode before calling netif_wake_queue() when linking on to avoid
the device missing the receiving packets.

The transmission may start after calling netif_wake_queue(), and the
packets of resopnse may reach before calling rtl8152_set_rx_mode()
which let the device could receive packets. Then, the packets of
response would be missed.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The device could only check the checksum of TCP and UDP packets. Therefore,
for the IPv4 packets excluding TCP and UDP, the check of checksum is necessary,
even though the IP checksum is correct.

Take ICMP for example, The IP checksum may be correct, but the ICMP checksum
may be wrong.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The data pointer in the config space TLV parser already includes
NFP_NET_CFG_TLV_BASE, it should not be added again. Incorrect
offset values were only used in printed user output, rendering
the bug merely cosmetic.

Fixes: 73a0329b ("nfp: add TLV capabilities to the BAR")
Signed-off-by: Edwin Peer <edwin.peer@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull firewire updates from Stefan Richter

  - make JMicron JMB38x controllers work with IOMMU-equipped systems

  - IP-over-1394: allow user-configured MTU of up to 4096 bytes

* tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire-ohci: work around oversized DMA reads on JMicron controllers
  firewire: net: max MTU off by one

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v4.16 kernel cycle.
  Like with GPIO it is actually a bit calm this time.

  Core changes:

   - After lengthy discussions and partly due to my ignorance, we have
     merged a patch making pinctrl_force_default() and
     pinctrl_force_sleep() reprogram the states into the hardware of any
     hogged pins, even if they are already in the desired state.

     This only apply to hogged pins since groups of pins owned by
     drivers need to be managed by each driver, lest they could not do
     things like runtime PM and put pins to sleeping state even if the
     system as a whole is not in sleep.

  New drivers:

   - New driver for the Microsemi Ocelot SoC. This is used in ethernet
     switches.

   - The X-Powers AXP209 GPIO driver was extended to also deal with pin
     control and moved over from the GPIO subsystem. This circuit is a
     mixed-mode integrated circuit which is part of AllWinner designs.

   - New subdriver for the Qualcomm MSM8998 SoC, core of a high end
     mobile devices (phones) chipset.

   - New subdriver for the ST Microelectronics STM32MP157 MPU and
     STM32F769 MCU from the STM32 family.

   - New subdriver for the MediaTek MT7622 SoC. This is used for
     routers, repeater, gateways and such network infrastructure.

   - New subdriver for the NXP (former Freescale) i.MX 6ULL. This SoC
     has multimedia features and target "smart devices", I guess in-car
     entertainment, in-flight entertainment, industrial control panels
     etc.

  General improvements:

   - Incremental improvements on the SH-PFC subdrivers for things like
     the CAN bus.

   - Enable the glitch filter on Baytrail GPIOs used for interrupts.

   - Proper handling of pins to GPIO ranges on the Semtec SX150X

   - An IRQ setup ordering fix on MCP23S08.

   - A good set of janitorial coding style fixes"

* tag 'pinctrl-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (102 commits)
  pinctrl: mcp23s08: fix irq setup order
  pinctrl: Forward declare struct device
  pinctrl: sunxi: Use of_clk_get_parent_count() instead of open coding
  pinctrl: stm32: add STM32F769 MCU support
  pinctrl: sx150x: Add a static gpio/pinctrl pin range mapping
  pinctrl: sx150x: Register pinctrl before adding the gpiochip
  pinctrl: sx150x: Unregister the pinctrl on release
  pinctrl: ingenic: Remove redundant dev_err call in ingenic_pinctrl_probe()
  pinctrl: sprd: Use seq_putc() in sprd_pinconf_group_dbg_show()
  pinctrl: pinmux: Use seq_putc() in pinmux_pins_show()
  pinctrl: abx500: Use seq_putc() in abx500_gpio_dbg_show()
  pinctrl: mediatek: mt7622: align error handling of mtk_hw_get_value call
  pinctrl: mediatek: mt7622: fix potential uninitialized value being returned
  pinctrl: uniphier: refactor drive strength get/set functions
  pinctrl: imx7ulp: constify struct imx_cfg_params_decode
  pinctrl: imx: constify struct imx_pinctrl_soc_info
  pinctrl: imx7d: simplify imx7d_pinctrl_probe
  pinctrl: imx: use struct imx_pinctrl_soc_info as a const
  pinctrl: sunxi-pinctrl: fix pin funtion can not be match correctly.
  pinctrl: qcom: Add msm8998 pinctrl driver
  ...

Pull RTC updates from Alexandre Belloni:
 "Not much this cycle. I've pushed the at32ap700x removal late but it is
  unlikely to cause any issues.

  Summary:

  Subsystem:
   - Move ABI documentation to Documentation/ABI

  New driver:
   - NXP i.MX53 SRTC
   - Chrome OS EC RTC

  Drivers:
   - Remove at32ap700x
   - Many fixes in various error paths"

* tag 'rtc-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  rtc: remove rtc-at32ap700x
  Documentation: rtc: move iotcl interface documentation to ABI
  Documentation: rtc: add sysfs file permissions
  Documentation: rtc: move sysfs documentation to ABI
  rtc: mxc_v2: remove __exit annotation
  rtc: mxc_v2: Remove unnecessary platform_get_resource() error check
  rtc: add mxc driver for i.MX53 SRTC
  dt-bindings: rtc: add bindings for i.MX53 SRTC
  rtc: r7301: Fix a possible sleep-in-atomic bug in rtc7301_set_time
  rtc: r7301: Fix a possible sleep-in-atomic bug in rtc7301_read_time
  rtc: omap: fix unbalanced clk_prepare_enable/clk_disable_unprepare
  rtc: ac100: Fix multiple race conditions
  rtc: sun6i: ensure rtc is kfree'd on error
  rtc: cros-ec: add cros-ec-rtc driver.
  mfd: cros_ec: Introduce RTC commands and events definitions.
  rtc: stm32: Fix copyright
  rtc: Remove unused RTC_DEVICE_NAME_SIZE
  rtc: r9701: Remove r9701_remove function
  rtc: brcmstb-waketimer: fix error handling in brcmstb_waketmr_probe()

Pull alpha updates from Matt Turner:
 "A few small fixes and clean ups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
  alpha: fix crash if pthread_create races with signal delivery
  alpha: fix formating of stack content
  alpha: fix reboot on Avanti platform
  alpha: deprecate pci_get_bus_and_slot()
  alpha: Fix mixed up args in EXC macro in futex operations
  alpha: osf_sys.c: use timespec64 where appropriate
  alpha: osf_sys.c: fix put_tv32 regression
  alpha: make thread_saved_pc static
  alpha: make XTABS equivalent to TAB3

Pull powerpc updates from Michael Ellerman:
 "Highlights:

   - Enable support for memory protection keys aka "pkeys" on Power7/8/9
     when using the hash table MMU.

   - Extend our interrupt soft masking to support masking PMU interrupts
     as well as "normal" interrupts, and then use that to implement
     local_t for a ~4x speedup vs the current atomics-based
     implementation.

   - A new driver "ocxl" for "Open Coherent Accelerator Processor
     Interface (OpenCAPI)" devices.

   - Support for new device tree properties on PowerVM to describe
     hotpluggable memory and devices.

   - Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 64-bit
     VDSO.

   - Freescale updates from Scott: fixes for CPM GPIO and an FSL PCI
     erratum workaround, plus a minor cleanup patch.

  As well as quite a lot of other changes all over the place, and small
  fixes and cleanups as always.

  Thanks to: Alan Modra, Alastair D'Silva, Alexey Kardashevskiy,
  Alistair Popple, Andreas Schwab, Andrew Donnellan, Aneesh Kumar K.V,
  Anju T Sudhakar, Anshuman Khandual, Anton Blanchard, Arnd Bergmann,
  Balbir Singh, Benjamin Herrenschmidt, Bhaktipriya Shridhar, Bryant G.
  Ly, Cédric Le Goater, Christophe Leroy, Christophe Lombard, Cyril Bur,
  David Gibson, Desnes A. Nunes do Rosario, Dmitry Torokhov, Frederic
  Barrat, Geert Uytterhoeven, Guilherme G. Piccoli, Gustavo A. R. Silva,
  Gustavo Romero, Ivan Mikhaylov, Joakim Tjernlund, Joe Perches, Josh
  Poimboeuf, Juan J. Alvarez, Julia Cartwright, Kamalesh Babulal,
  Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu Malaterre, Michael
  Bringmann, Michael Hanselmann, Michael Neuling, Nathan Fontenot,
  Naveen N. Rao, Nicholas Piggin, Paul Mackerras, Philippe Bergheaud,
  Ram Pai, Russell Currey, Santosh Sivaraj, Scott Wood, Seth Forshee,
  Simon Guo, Stewart Smith, Sukadev Bhattiprolu, Thiago Jung Bauermann,
  Vaibhav Jain, Vasyl Gomonovych"

* tag 'powerpc-4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (199 commits)
  powerpc/mm/radix: Fix build error when RADIX_MMU=n
  macintosh/ams-input: Use true and false for boolean values
  macintosh: change some data types from int to bool
  powerpc/watchdog: Print the NIP in soft_nmi_interrupt()
  powerpc/watchdog: regs can't be null in soft_nmi_interrupt()
  powerpc/watchdog: Tweak watchdog printks
  powerpc/cell: Remove axonram driver
  rtc-opal: Fix handling of firmware error codes, prevent busy loops
  powerpc/mpc52xx_gpt: make use of raw_spinlock variants
  macintosh/adb: Properly mark continued kernel messages
  powerpc/pseries: Fix cpu hotplug crash with memoryless nodes
  powerpc/numa: Ensure nodes initialized for hotplug
  powerpc/numa: Use ibm,max-associativity-domains to discover possible nodes
  powerpc/kernel: Block interrupts when updating TIDR
  powerpc/powernv/idoa: Remove unnecessary pcidev from pci_dn
  powerpc/mm/nohash: do not flush the entire mm when range is a single page
  powerpc/pseries: Add Initialization of VF Bars
  powerpc/pseries/pci: Associate PEs to VFs in configure SR-IOV
  powerpc/eeh: Add EEH notify resume sysfs
  powerpc/eeh: Add EEH operations to notify resume
  ...

Pull ARM updates from Russell King:

 - StrongARM SA1111 updates to modernise and remove cruft

 - Add StrongARM gpio drivers for board GPIOs

 - Verify size of zImage is what we expect to avoid issues with
   appended DTB

 - nommu updates from Vladimir Murzin

 - page table read-write-execute checking from Jinbum Park

 - Broadcom Brahma-B15 cache updates from Florian Fainelli

 - Avoid failure with kprobes test caused by inappropriately
   placed kprobes

 - Remove __memzero optimisation (which was incorrectly being
   used directly by some drivers)

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (32 commits)
  ARM: 8745/1: get rid of __memzero()
  ARM: 8744/1: don't discard memblock for kexec
  ARM: 8743/1: bL_switcher: add MODULE_LICENSE tag
  ARM: 8742/1: Always use REFCOUNT_FULL
  ARM: 8741/1: B15: fix unused label warnings
  ARM: 8740/1: NOMMU: Make sure we do not hold stale data in mem[] array
  ARM: 8739/1: NOMMU: Setup VBAR/Hivecs for secondaries cores
  ARM: 8738/1: Disable CONFIG_DEBUG_VIRTUAL for NOMMU
  ARM: 8737/1: mm: dump: add checking for writable and executable
  ARM: 8736/1: mm: dump: make the page table dumping seq_file
  ARM: 8735/1: mm: dump: make page table dumping reusable
  ARM: sa1100/neponset: add GPIO drivers for control and modem registers
  ARM: sa1100/assabet: add BCR/BSR GPIO driver
  ARM: 8734/1: mm: idmap: Mark variables as ro_after_init
  ARM: 8733/1: hw_breakpoint: Mark variables as __ro_after_init
  ARM: 8732/1: NOMMU: Allow userspace to access background MPU region
  ARM: 8727/1: MAINTAINERS: Update brcmstb entries to cover B15 code
  ARM: 8728/1: B15: Register reboot notifier for KEXEC
  ARM: 8730/1: B15: Add suspend/resume hooks
  ARM: 8726/1: B15: Add CPU hotplug awareness
  ...

Pull microblaze updates from Michal Simek:

 - Fix endian handling and Kconfig dependency

 - Fix iounmap prototype

* tag 'microblaze-4.16-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Setup proper dependency for optimized lib functions
  microblaze: fix iounmap prototype
  microblaze: fix endian handling

Pull drm updates from Dave Airlie:
 "This seems to have been a comparatively quieter merge window, I assume
  due to holidays etc. The "biggest" change is AMD header cleanups, which
  merge/remove a bunch of them. The AMD gpu scheduler is now being made generic
  with the etnaviv driver wanting to reuse the code, hopefully other drivers
  can go in the same direction.

  Otherwise it's the usual lots of stuff in i915/amdgpu, not so much stuff
  elsewhere.

  Core:
   - Add .last_close and .output_poll_changed helpers to reduce driver footprints
   - Fix plane clipping
   - Improved debug printing support
   - Add panel orientation property
   - Update edid derived properties at edid setting
   - Reduction in fbdev driver footprint
   - Move amdgpu scheduler into core for other drivers to use.

  i915:
   - Selftest and IGT improvements
   - Fast boot prep work on IPS, pipe config
   - HW workarounds for Cannonlake, Geminilake
   - Cannonlake clock and HDMI2.0 fixes
   - GPU cache invalidation and context switch improvements
   - Display planes cleanup
   - New PMU interface for perf queries
   - New firmware support for KBL/SKL
   - Geminilake HW workaround for perforamce
   - Coffeelake stolen memory improvements
   - GPU reset robustness work
   - Cannonlake horizontal plane flipping
   - GVT work

  amdgpu/radeon:
   - RV and Vega header file cleanups (lots of lines gone!)
   - TTM operation context support
   - 48-bit GPUVM support for Vega/RV
   - ECC support for Vega
   - Resizeable BAR support
   - Multi-display sync support
   - Enable swapout for reserved BOs during allocation
   - S3 fixes on Raven
   - GPU reset cleanup and fixes
   - 2+1 level GPU page table

  amdkfd:
   - GFX7/8 SDMA user queues support
   - Hardware scheduling for multiple processes
   - dGPU prep work

  rcar:
   - Added R8A7743/5 support
   - System suspend/resume support

  sun4i:
   - Multi-plane support for YUV formats
   - A83T and LVDS support

  msm:
   - Devfreq support for GPU

  tegra:
   - Prep work for adding Tegra186 support
   - Tegra186 HDMI support
   - HDMI2.0 and zpos support by using generic helpers

  tilcdc:
   - Misc fixes

  omapdrm:
   - Support memory bandwidth limits
   - DSI command mode panel cleanups
   - DMM error handling

  exynos:
   - drop the old IPP subdriver.

  etnaviv:
   - Occlusion query fixes
   - Job handling fixes
   - Prep work for hooking in gpu scheduler

  armada:
   - Move closer to atomic modesetting
   - Allow disabling primary plane if overlay is full screen

  imx:
   - Format modifier support
   - Add tile prefetch to PRE
   - Runtime PM support for PRG

  ast:
   - fix LUT loading"

* tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linux: (1471 commits)
  drm/ast: Load lut in crtc_commit
  drm: Check for lessee in DROP_MASTER ioctl
  drm: fix gpu scheduler link order
  drm/amd/display: Demote error print to debug print when ATOM impl missing
  dma-buf: fix reservation_object_wait_timeout_rcu once more v2
  drm/amdgpu: Avoid leaking PM domain on driver unbind (v2)
  drm/amd/amdgpu: Add Polaris version check
  drm/amdgpu: Reenable manual GPU reset from sysfs
  drm/amdgpu: disable MMHUB power gating on raven
  drm/ttm: Don't unreserve swapped BOs that were previously reserved
  drm/ttm: Don't add swapped BOs to swap-LRU list
  drm/amdgpu: only check for ECC on Vega10
  drm/amd/powerplay: Fix smu_table_entry.handle type
  drm/ttm: add VADDR_FLAG_UPDATED_COUNT to correctly update dma_page global count
  drm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfig
  drm/radeon: fill in rb backend map on evergreen/ni.
  drm/amdgpu/gfx9: fix ngg enablement to clear gds reserved memory (v2)
  drm/ttm: only free pages rather than update global memory count together
  drm/amdgpu: fix CPU based VM updates
  drm/amdgpu: fix typo in amdgpu_vce_validate_bo
  ...

Pull clk updates from Stephen Boyd:
 "The core framework has a handful of patches this time around, mostly
  due to the clk rate protection support added by Jerome Brunet.

  This feature will allow consumers to lock in a certain rate on the
  output of a clk so that things like audio playback don't hear pops
  when the clk frequency changes due to shared parent clks changing
  rates. Currently the clk API doesn't guarantee the rate of a clk stays
  at the rate you request after clk_set_rate() is called, so this new
  API will allow drivers to express that requirement.

  Beyond this, the core got some debugfs pretty printing patches and a
  couple minor non-critical fixes.

  Looking outside of the core framework diff we have some new driver
  additions and the removal of a legacy TI clk driver. Both of these hit
  high in the dirstat. Also, the removal of the asm-generic/clkdev.h
  file causes small one-liners in all the architecture Kbuild files.

  Overall, the driver diff seems to be the normal stuff that comes all
  the time to fix little problems here and there and to support new
  hardware.

  Summary:

  Core:
   - Clk rate protection
   - Symbolic clk flags in debugfs output
   - Clk registration enabled clks while doing bookkeeping updates

  New Drivers:
   - Spreadtrum SC9860
   - HiSilicon hi3660 stub
   - Qualcomm A53 PLL, SPMI clkdiv, and MSM8916 APCS
   - Amlogic Meson-AXG
   - ASPEED BMC

  Removed Drivers:
   - TI OMAP 3xxx legacy clk (non-DT) support
   - asm*/clkdev.h got removed (not really a driver)

  Updates:
   - Renesas FDP1-0 module clock on R-Car M3-W
   - Renesas LVDS module clock on R-Car V3M
   - Misc fixes to pr_err() prints
   - Qualcomm MSM8916 audio fixes
   - Qualcomm IPQ8074 rounded out support for more peripherals
   - Qualcomm Alpha PLL variants
   - Divider code was using container_of() on bad pointers
   - Allwinner DE2 clks on H3
   - Amlogic minor data fixes and dropping of CLK_IGNORE_UNUSED
   - Mediatek clk driver compile test support
   - AT91 PMC clk suspend/resume restoration support
   - PLL issues fixed on si5351
   - Broadcom IProc PLL calculation updates
   - DVFS support for Armada mvebu CPU clks
   - Allwinner fixed post-divider support
   - TI clkctrl fixes and support for newer SoCs"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits)
  clk: aspeed: Handle inverse polarity of USB port 1 clock gate
  clk: aspeed: Fix return value check in aspeed_cc_init()
  clk: aspeed: Add reset controller
  clk: aspeed: Register gated clocks
  clk: aspeed: Add platform driver and register PLLs
  clk: aspeed: Register core clocks
  clk: Add clock driver for ASPEED BMC SoCs
  clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being built
  clk: fix reentrancy of clk_enable() on UP systems
  clk: meson-axg: fix potential NULL dereference in axg_clkc_probe()
  clk: Simplify debugfs registration
  clk: Fix debugfs_create_*() usage
  clk: Show symbolic clock flags in debugfs
  clk: renesas: r8a7796: Add FDP clock
  clk: Move __clk_{get,put}() into private clk.h API
  clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks
  clk: Improve flags doc for of_clk_detect_critical()
  arch: Remove clkdev.h asm-generic from Kbuild
  clk: sunxi-ng: a83t: Add M divider to TCON1 clock
  clk: Prepare to remove asm-generic/clkdev.h
  ...

Pull ARM SoC driver updates from Arnd Bergmann:
 "A number of new drivers get added this time, along with many
  low-priority bugfixes. The most interesting changes by subsystem are:

  bus drivers:
   - Updates to the Broadcom bus interface driver to support newer SoC
     types
   - The TI OMAP sysc driver now supports updated DT bindings

  memory controllers:
   - A new driver for Tegra186 gets added
   - A new driver for the ti-emif sram, to allow relocating
     suspend/resume handlers there

  SoC specific:
   - A new driver for Qualcomm QMI, the interface to the modem on MSM
     SoCs
   - A new driver for power domains on the actions S700 SoC
   - A driver for the Xilinx Zynq VCU logicoreIP

  reset controllers:
   - A new driver for Amlogic Meson-AGX
   - various bug fixes

  tee subsystem:
   - A new user interface got added to enable asynchronous communication
     with the TEE supplicant.
   - A new method of using user space memory for communication with the
     TEE is added"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (84 commits)
  of: platform: fix OF node refcount leak
  soc: fsl: guts: Add a NULL check for devm_kasprintf()
  bus: ti-sysc: Fix smartreflex sysc mask
  psci: add CPU_IDLE dependency
  soc: xilinx: Fix Kconfig alignment
  soc: xilinx: xlnx_vcu: Use bitwise & rather than logical && on clkoutdiv
  soc: xilinx: xlnx_vcu: Depends on HAS_IOMEM for xlnx_vcu
  soc: bcm: brcmstb: Be multi-platform compatible
  soc: brcmstb: biuctrl: exit without warning on non brcmstb platforms
  Revert "soc: brcmstb: Only register SoC device on STB platforms"
  bus: omap: add MODULE_LICENSE tags
  soc: brcmstb: Only register SoC device on STB platforms
  tee: shm: Potential NULL dereference calling tee_shm_register()
  soc: xilinx: xlnx_vcu: Add Xilinx ZYNQMP VCU logicoreIP init driver
  dt-bindings: soc: xilinx: Add DT bindings to xlnx_vcu driver
  soc: xilinx: Create folder structure for soc specific drivers
  of: platform: populate /firmware/ node from of_platform_default_populate_init()
  soc: samsung: Add SPDX license identifiers
  soc: qcom: smp2p: Use common error handling code in qcom_smp2p_probe()
  tee: shm: don't put_page on null shm->pages
  ...

Pull ARM SoC platform updates from Arnd Bergmann:
 "These are mostly minor bugfixes, cleanup and many defconfig updates to
  support added drivers. In particular OMAP and PXA keep cleaning up the
  legacy code base, as usual.

  Nvidia adds some more SoC support code for Tegra 186.

  For the first time on years, we are actually adding a non-DT platform
  for the EP93xx based Liebherr controller BK3.1. It's a minor variation
  of the EP93xx reference design and in active use, while EP93xx
  apparently doesn't have enough new development to have any device tree
  support"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits)
  ARM: omap: hwmod: fix section mismatch warnings
  ARM: pxa/tosa-bt: add MODULE_LICENSE tag
  arm64: defconfig: enable CONFIG_ACPI_APEI_EINJ
  arm64: defconfig: enable EDAC GHES option
  arm64: defconfig: enable CONFIG_ACPI_APEI_MEMORY_FAILURE
  ARM: imx_v6_v7_defconfig: enable CONFIG_CPU_FREQ_STAT
  Wind down ARM/TANGO port
  ARM: davinci: constify gpio_led
  ARM: davinci: drop unneeded newline
  soc: Add SoC driver for Gemini
  ARM: SAMSUNG: Add SPDX license identifiers
  ARM: S5PV210: Add SPDX license identifiers
  ARM: S3C64XX: Add SPDX license identifiers
  ARM: S3C24XX: Add SPDX license identifiers
  ARM: EXYNOS: Add SPDX license identifiers
  ARM: imx: remove unused imx3 pm definitions
  ARM: imx: don't abort MMDC probe if power saving status doesn't match
  ARM: imx_v6_v7_defconfig: enable RTC_DRV_MXC_V2
  ARM: imx_v6_v7_defconfig: Add missing config for DART-MX6 SoM
  ARM: davinci: Use PTR_ERR_OR_ZERO()
  ...

Pull ARM SoC device tree updates from Arnd Bergmann:
 "We get a moderate number of new machines this time, and only one new
  SoC variant (Actions S700):

  Actions:
   - S700 Soc and CubieBoard7 development board
   - Allo.com Sparky Single-board-computer

  Allwinner:
   - Orange Pi R1 development board
   - Libre Computer Board ALL-H3-CC H3 single-board computer

  ASpeed ast2x00:
   - Witherspoon: OpenPower Power9 server manufactured by IBM that uses the ASPEED ast2500
   - Zaius: OpenPower Power9 server manufactured by Invatech that uses the ASPEED ast2500
   - Q71L: Intel Xeon server manufactured by Qanta that uses the ASPEED ast2400

  AT91:
   - Axentia Nattis/Natte digital signage
   - sama5d2 PTC-ek Evaluation board

  Freescale/NXP i.MX:
   - SolidRun Humminboard2 development board
   - Variscite DART-MX6 SoM and Carrier-board
   - Technologic TS-4600 and TS-7970 development board
   - Toradex Colibri iMX7D SoM board
   - v1.5 variant of Solidrun Cubox-i and Hummingboard

  Freescale/NXP Layerscape:
   - Moxa UC-8410A Series industrial computer

  Gemini:
   - D-Link DNS-313 NAS enclosure

  OMAP:
   - LogicPD OMAP35xx SOM-LV devkit
   - LogicPD OMAP35xx Torpedo devkit

  Renesas:
   - r8a77970 (V3M) Starter Kit board
   - r8a7795 (M3-W) Salvator-XS board

  We finally managed to get the dtc warnings under control, with no more
  build-time warnings for bad device tree files. This includes fixes for
  the majority of platforms, including nomadik, samsung, lpc32xx, STi,
  spear, mediatek, freescale, qcom, realview, keystone, omap, kirkwood,
  renesas, hisilicon, and broadcom.

  Files get rearranged on a few platforms, in particular the Marvell
  Armada 7K/8K device tree files are changed in preparation for future
  SoC support, based on more than two of the same chips in one package,
  and some boards get renamed for oxnas for consistency.

  Finally, many existing SoCs gain descriptions for additional on-chip
  devices that we can now support with kernel drivers:

   - Allwinner A83t (drm, ethernet, i2c, ...), H3/H5 (USB-OTG)
   - Amlogic AXG family (clk, pinctrl, pwm, ...), and others (vpu, hdmi)
   - Aspeed clk controller support
   - Freescale LS1088A, LS1021A device support
   - Gemini Ethernet, PCI, TVE, panel
   - Keystone gpio, qspi, more uarts
   - Mediatek cpufreq, regulator, clock, reset
   - Marvell thermal, cpufreq, nand
   - Renesas SMP, thermal, timer, PWM, sound, phy, ipmmu
   - Rockchip Mipi, GPU, display
   - Samsung Exynos5433 PMU, power domain, nfc
   - Spreadtrum: sc9860 clocks
   - Tegra TX2 PSDI, HDMI, I2C,SMMU, display, fuse, ..."

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (690 commits)
  arm64: dts: stratix10: fix SPI settings
  ARM: dts: socfpga: add i2c reset signals
  arm64: dts: stratix10: add USB ECC reset bit
  arm64: dts: stratix10: enable USB on the devkit
  ARM: dts: socfpga: disable over-current for Arria10 USB devkit
  ARM: dts: Nokia N9: add support for up/down keys in the dts
  ARM: dts: nomadik: add interrupt-parent for clcd
  ARM: dts: Add ethernet to a bunch of platforms
  ARM: dts: Add ethernet to the Gemini SoC
  ARM: dts: rename oxnas dts files
  ARM: dts: s5pv210: add interrupt-parent for ohci
  ARM: lpc3250: fix uda1380 gpio numbers
  ARM: dts: STi: Add gpio polarity for "hdmi,hpd-gpio" property
  ARM: dts: dra7: Reduce shut down temperature of non-cpu thermal zones
  ARM: dts: n900: Add aliases for lcd and tvout displays
  ARM: dts: Update ti-sysc data for existing users
  ARM: dts: Fix smartreflex compatible for omap3 shared mpu-iva instance
  arm64: dts: marvell: armada-80x0: Fix pinctrl compatible string
  arm: spear13xx: Fix spics gpio controller's warning
  arm: spear13xx: Fix dmas cells
  ...

Pull printk updates from Petr Mladek:

 - Add a console_msg_format command line option:

     The value "default" keeps the old "[time stamp] text\n" format. The
     value "syslog" allows to see the syslog-like "<log
     level>[timestamp] text" format.

     This feature was requested by people doing regression tests, for
     example, 0day robot. They want to have both filtered and full logs
     at hands.

 - Reduce the risk of softlockup:

     Pass the console owner in a busy loop.

     This is a new approach to the old problem. It was first proposed by
     Steven Rostedt on Kernel Summit 2017. It marks a context in which
     the console_lock owner calls console drivers and could not sleep.
     On the other side, printk() callers could detect this state and use
     a busy wait instead of a simple console_trylock(). Finally, the
     console_lock owner checks if there is a busy waiter at the end of
     the special context and eventually passes the console_lock to the
     waiter.

     The hand-off works surprisingly well and helps in many situations.
     Well, there is still a possibility of the softlockup, for example,
     when the flood of messages stops and the last owner still has too
     much to flush.

     There is increasing number of people having problems with
     printk-related softlockups. We might eventually need to get better
     solution. Anyway, this looks like a good start and promising
     direction.

 - Do not allow to schedule in console_unlock() called from printk():

     This reverts an older controversial commit. The reschedule helped
     to avoid softlockups. But it also slowed down the console output.
     This patch is obsoleted by the new console waiter logic described
     above. In fact, the reschedule made the hand-off less effective.

 - Deprecate "%pf" and "%pF" format specifier:

     It was needed on ia64, ppc64 and parisc64 to dereference function
     descriptors and show the real function address. It is done
     transparently by "%ps" and "pS" format specifier now.

     Sergey Senozhatsky found that all the function descriptors were in
     a special elf section and could be easily detected.

 - Remove printk_symbol() API:

     It has been obsoleted by "%pS" format specifier, and this change
     helped to remove few continuous lines and a less intuitive old API.

 - Remove redundant memsets:

     Sergey removed unnecessary memset when processing printk.devkmsg
     command line option.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (27 commits)
  printk: drop redundant devkmsg_log_str memsets
  printk: Never set console_may_schedule in console_trylock()
  printk: Hide console waiter logic into helpers
  printk: Add console owner and waiter logic to load balance console writes
  kallsyms: remove print_symbol() function
  checkpatch: add pF/pf deprecation warning
  symbol lookup: introduce dereference_symbol_descriptor()
  parisc64: Add .opd based function descriptor dereference
  powerpc64: Add .opd based function descriptor dereference
  ia64: Add .opd based function descriptor dereference
  sections: split dereference_function_descriptor()
  openrisc: Fix conflicting types for _exext and _stext
  lib: do not use print_symbol()
  irq debug: do not use print_symbol()
  sysfs: do not use print_symbol()
  drivers: do not use print_symbol()
  x86: do not use print_symbol()
  unicore32: do not use print_symbol()
  sh: do not use print_symbol()
  mn10300: do not use print_symbol()
  ...

Pull VFIO updates from Alex Williamson:

 - Mask INTx from user if pdev->irq is zero (Alexey Kardashevskiy)

 - Capability helper cleanup (Alex Williamson)

 - Allow mmaps overlapping MSI-X vector table with region capability
   exposing this feature (Alexey Kardashevskiy)

 - mdev static cleanups (Xiongwei Song)

* tag 'vfio-v4.16-rc1' of git://github.com/awilliam/linux-vfio:
  vfio: mdev: make a couple of functions and structure vfio_mdev_driver static
  vfio-pci: Allow mapping MSIX BAR
  vfio: Simplify capability helper
  vfio-pci: Mask INTx if a device is not capabable of enabling it

Pull tracing updates from Steven Rostedt:
 "There's not much changes for the tracing system this release. Mostly
  small clean ups and fixes.

  The biggest change is to how bprintf works. bprintf is used by
  trace_printk() to just save the format and args of a printf call, and
  the formatting is done when the trace buffer is read. This is done to
  keep the formatting out of the fast path (this was recommended by
  you). The issue is when arguments are de-referenced.

  If a pointer is saved, and the format has something like "%*pbl", when
  the buffer is read, it will de-reference the argument then. The
  problem is if the data no longer exists. This can cause the kernel to
  oops.

  The fix for this was to make these de-reference pointes do the
  formatting at the time it is called (the fast path), as this
  guarantees that the data exists (and doesn't change later)"

* tag 'trace-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  vsprintf: Do not have bprintf dereference pointers
  ftrace: Mark function tracer test functions noinline/noclone
  trace_uprobe: Display correct offset in uprobe_events
  tracing: Make sure the parsed string always terminates with '\0'
  tracing: Clear parser->idx if only spaces are read
  tracing: Detect the string nul character when parsing user input string

Merge KASAN word-at-a-time fixups from Andrey Ryabinin.

The word-at-a-time optimizations have caused headaches for KASAN, since
the whole point is that we access byte streams in bigger chunks, and
KASAN can be unhappy about the potential extra access at the end of the
string.

We used to have a horrible hack in dcache, and then people got
complaints from the strscpy() case.  This fixes it all up properly, by
adding an explicit helper for the "access byte stream one word at a
time" case.

* emailed patches from Andrey Ryabinin <aryabinin@virtuozzo.com>:
  fs: dcache: Revert "manually unpoison dname after allocation to shut up kasan's reports"
  fs/dcache: Use read_word_at_a_time() in dentry_string_cmp()
  lib/strscpy: Shut up KASAN false-positives in strscpy()
  compiler.h: Add read_word_at_a_time() function.
  compiler.h, kasan: Avoid duplicating __read_once_size_nocheck()

This reverts commit df4c0e36.

It's no longer needed since dentry_string_cmp() now uses
read_word_at_a_time() to avoid kasan's reports.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dentry_string_cmp() performs the word-at-a-time reads from 'cs' and may
read slightly more than it was requested in kmallac().  Normally this
would make KASAN to report out-of-bounds access, but this was
workarounded by commit df4c0e36 ("fs: dcache: manually unpoison
dname after allocation to shut up kasan's reports").

This workaround is not perfect, since it allows out-of-bounds access to
dentry's name for all the code, not just in dentry_string_cmp().

So it would be better to use read_word_at_a_time() instead and revert
commit df4c0e36.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

strscpy() performs the word-at-a-time optimistic reads.  So it may may
access the memory past the end of the object, which is perfectly fine
since strscpy() doesn't use that (past-the-end) data and makes sure the
optimistic read won't cross a page boundary.

Use new read_word_at_a_time() to shut up the KASAN.

Note that this potentially could hide some bugs.  In example bellow,
stscpy() will copy more than we should (1-3 extra uninitialized bytes):

        char dst[8];
        char *src;

        src = kmalloc(5, GFP_KERNEL);
        memset(src, 0xff, 5);
        strscpy(dst, src, 8);
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Sometimes we know that it's safe to do potentially out-of-bounds access
because we know it won't cross a page boundary.  Still, KASAN will
report this as a bug.

Add read_word_at_a_time() function which is supposed to be used in such
cases.  In read_word_at_a_time() KASAN performs relaxed check - only the
first byte of access is validated.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Instead of having two identical __read_once_size_nocheck() functions
with different attributes, consolidate all the difference in new macro
__no_kasan_or_inline and use it. No functional changes.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This implements ndo_poll_controller callback which is necessary to
enable netconsole.
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Newly added igmpv3_get_srcaddr() needs to be called under rcu lock.

Timer callbacks do not ensure this locking.

=============================
WARNING: suspicious RCU usage
4.15.0+ #200 Not tainted
-----------------------------
./include/linux/inetdevice.h:216 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
3 locks held by syzkaller616973/4074:
 #0:  (&mm->mmap_sem){++++}, at: [<00000000bfce669e>] __do_page_fault+0x32d/0xc90 arch/x86/mm/fault.c:1355
 #1:  ((&im->timer)){+.-.}, at: [<00000000619d2f71>] lockdep_copy_map include/linux/lockdep.h:178 [inline]
 #1:  ((&im->timer)){+.-.}, at: [<00000000619d2f71>] call_timer_fn+0x1c6/0x820 kernel/time/timer.c:1316
 #2:  (&(&im->lock)->rlock){+.-.}, at: [<000000005f833c5c>] spin_lock_bh include/linux/spinlock.h:315 [inline]
 #2:  (&(&im->lock)->rlock){+.-.}, at: [<000000005f833c5c>] igmpv3_send_report+0x98/0x5b0 net/ipv4/igmp.c:600

stack backtrace:
CPU: 0 PID: 4074 Comm: syzkaller616973 Not tainted 4.15.0+ #200
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x194/0x257 lib/dump_stack.c:53
 lockdep_rcu_suspicious+0x123/0x170 kernel/locking/lockdep.c:4592
 __in_dev_get_rcu include/linux/inetdevice.h:216 [inline]
 igmpv3_get_srcaddr net/ipv4/igmp.c:329 [inline]
 igmpv3_newpack+0xeef/0x12e0 net/ipv4/igmp.c:389
 add_grhead.isra.27+0x235/0x300 net/ipv4/igmp.c:432
 add_grec+0xbd3/0x1170 net/ipv4/igmp.c:565
 igmpv3_send_report+0xd5/0x5b0 net/ipv4/igmp.c:605
 igmp_send_report+0xc43/0x1050 net/ipv4/igmp.c:722
 igmp_timer_expire+0x322/0x5c0 net/ipv4/igmp.c:831
 call_timer_fn+0x228/0x820 kernel/time/timer.c:1326
 expire_timers kernel/time/timer.c:1363 [inline]
 __run_timers+0x7ee/0xb70 kernel/time/timer.c:1666
 run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692
 __do_softirq+0x2d7/0xb85 kernel/softirq.c:285
 invoke_softirq kernel/softirq.c:365 [inline]
 irq_exit+0x1cc/0x200 kernel/softirq.c:405
 exiting_irq arch/x86/include/asm/apic.h:541 [inline]
 smp_apic_timer_interrupt+0x16b/0x700 arch/x86/kernel/apic/apic.c:1052
 apic_timer_interrupt+0xa9/0xb0 arch/x86/entry/entry_64.S:938

Fixes: a46182b0 ("net: igmp: Use correct source address on IGMPv3 reports")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Older versions of VIOS servers do not send the firmware level in the VPD
buffer for the ibmvnic driver. Thus, not only the current message is mis-
leading but the firmware version in the ethtool will be NULL. Therefore,
this patch fixes the firmware string and its warning.

Fixes: 4e6759be ("ibmvnic: Feature implementation of VPD for the ibmvnic driver")
Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pointer rq is being initialized but this value is never read, it
is being updated inside a for-loop. Remove the initialization and
move it into the scope of the for-loop.

Cleans up clang warning:
drivers/net/vmxnet3/vmxnet3_drv.c:2763:27: warning: Value stored
to 'rq' during its initialization is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Shrikrishna Khare <skhare@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>