All what these 'drivers' do is expose a single (non standard ABI) sysfs
attribute that when written to does a direct pass-through to spi_write(). This
is rather ugly and does not justify the existence of a driver as the same can
easily done by using the spidev interface.

The drivers will eventually be rewritten as proper IIO ABI compliant drivers
which do have the proper abstraction layers between userspace and the device.
But in the meantime these driver do not add any extra value and just clutter up
the staging area. So just remove them.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Add Michael and myself as the maintainer for the Analog Devices IIO drivers.
The entry matches on all files in drivers/staging/iio and drivers/iio/ starting
with the 'ad' prefix, except for 'adjd' as that one is used by Avago
Technologies.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Add those persons who generally tend to review new IIO patches to the list of
designated reviewers to make sure that they are Cc'ed on new patches.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Use devm_kzalloc for all calls to kzalloc and not just the first.  Use
devm functions for other allocations as well. The calls to free the
allocated memory in the probe and remove functions are done away with
and a label is removed in the probe function.

The semantic match that finds the inconsistency is as follows:

// <smpl>
@@
@@

*devm_kzalloc(...)
...
*kzalloc(...)
// </smpl>
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

The size of the allocation is currently set to the size of the pointer
rather than the structure we should actually be allocating.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reported-by: kbuild@01.org
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>

This patch add support for s3c2410/s3c2416/s3c2440/s3c2443 ADC. The s3c24xx
is alomost same as ADCv1. But, There are a little difference as following:
- ADCMUX register address
- ADCDAT mask (10 bit or 12 bit ADC resolution according to SoC version)
- s3c24xx/s3c64xx has not included ADC_PHY enable register
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

The ADC in s3c64xx is almost the same as exynosv1, but
has a different 'select' method. Adding this here will be
helpful to move over the existing s3c64xx platform from the
legacy plat-samsung/adc driver to the new exynos-adc.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

The ADC is a 3-channel signal-ended 10-bit Successive Approximation
Register (SAR) A/D Converter. It uses the supply and ground as its reference
and converts the analog input signal into 10-bit binary digital codes.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This patch introduces the use of devm_iio_device_register and does away
with the unregister in the remove function.
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This patch introduces the use of devm_iio_device_register and does away
with the unregister in the remove function. The remove function is no
longer required and is completely removed.
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This patch adds support for ADC128S052 from TI.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Added any-motion trigger documentation.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This change implements BMC150 accelerometer driver. A BMC150 package
consist of a compass and an accelerometer. This driver only implements
accelerometer part.
Spec downloaded from:
http://ae-bst.resource.bosch.com/media/products/dokumente/bmc150/BST-BMC150-DS000-03.pdf

This sensor chip supports many advanced features, but this driver
implements minimum feature set which is a must to be useful.
This driver can be enhanced incrementally.
If the sensor vendor wants to update full featured version, they
can substitute or enhance this driver when they get chance.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This chip can support 3 different ranges. Allowing range specification.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

In an effort to improve raw read performance and at the same time enter
low power state at every possible chance.
For raw reads, it will keep the system powered on for a default or user
specified time, via autosuspend_delay attribute of device power.
This will help read multiple samples without power on/off sequence.
For triggers it will keep the system on till, requested to be turned
off by trigger state by utilizing run time PM usage counters.

When runtime pm is not enabled, then it keeps the chip in operation
mode always.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This patch fixes a warning from checkpatch.pl script :
"WARNING: Missing a blank line after declarations"
Signed-off-by: Oussama Jabbari <oussama.jabbari@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Convert a zero return value on error to a negative one, as returned
elsewhere in the function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}

// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This patch adds missing blank lines between declarations and code and
fixes lines starting by spaces, satisfying checkpatch.pl.
Signed-off-by: Murilo Opsfelder Araujo <mopsfelder@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Signed-off-by: Murilo Opsfelder Araujo <mopsfelder@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Silence the following sparse warnings by changing cast from u16 to
__be16:

  CHECK   drivers/staging/iio/accel/adis16240_core.c
drivers/staging/iio/accel/adis16240_core.c:128:51: warning: incorrect
type in argument 3 (different signedness)
drivers/staging/iio/accel/adis16240_core.c:128:51:    expected unsigned
short [usertype] *val
drivers/staging/iio/accel/adis16240_core.c:128:51:    got signed short
*<noident>
drivers/staging/iio/accel/adis16240_core.c:142:51: warning: incorrect
type in argument 3 (different signedness)
drivers/staging/iio/accel/adis16240_core.c:142:51:    expected unsigned
short [usertype] *val
drivers/staging/iio/accel/adis16240_core.c:142:51:    got signed short
*<noident>
Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Fix the following sparse warning:

drivers/staging/iio/light/isl29018.c:508:50: warning: incorrect type in
argument 3 (different signedness)
drivers/staging/iio/light/isl29018.c:508:50:    expected unsigned int
*conf_adc_bit
drivers/staging/iio/light/isl29018.c:508:50:    got int *<noident>
Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Fix the following sparse warnings:

 CHECK   drivers/staging/iio/magnetometer/hmc5843_core.c
drivers/staging/iio/magnetometer/hmc5843_core.c:138:70: warning:
incorrect type in argument 3 (different signedness)
drivers/staging/iio/magnetometer/hmc5843_core.c:138:70:    expected
unsigned int *val
drivers/staging/iio/magnetometer/hmc5843_core.c:138:70:    got int
*<noident>
drivers/staging/iio/magnetometer/hmc5843_core.c:215:64: warning:
incorrect type in argument 3 (different signedness)
drivers/staging/iio/magnetometer/hmc5843_core.c:215:64:    expected
unsigned int *val
drivers/staging/iio/magnetometer/hmc5843_core.c:215:64:    got int
*<noident>
drivers/staging/iio/magnetometer/hmc5843_core.c:354:72: warning:
incorrect type in argument 3 (different signedness)
drivers/staging/iio/magnetometer/hmc5843_core.c:354:72:    expected
unsigned int *val
drivers/staging/iio/magnetometer/hmc5843_core.c:354:72:    got int
*<noident>
drivers/staging/iio/magnetometer/hmc5843_core.c:362:72: warning:
incorrect type in argument 3 (different signedness)
drivers/staging/iio/magnetometer/hmc5843_core.c:362:72:    expected
unsigned int *val
drivers/staging/iio/magnetometer/hmc5843_core.c:362:72:    got int
*<noident>
Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

When copying multiple multiple samples that are adjacent in both the source as
well as the destination buffer, instead of creating a new demux table entry for
each sample just increase the length of the previous entry by the size of the
new sample. This makes the demuxing process slightly more efficient.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Makes the code slightly shorter and a bit easier to understand.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Fix the following sparse warnings:

  CHECK   drivers/staging/iio/impedance-analyzer/ad5933.c
drivers/staging/iio/impedance-analyzer/ad5933.c:241:17: warning:
incorrect type in assignment (different base types)
drivers/staging/iio/impedance-analyzer/ad5933.c:241:17:    expected
unsigned int [unsigned] [usertype] d32
drivers/staging/iio/impedance-analyzer/ad5933.c:241:17:    got
restricted __be32 [usertype] <noident>
drivers/staging/iio/impedance-analyzer/ad5933.c:263:13: warning:
incorrect type in assignment (different base types)
drivers/staging/iio/impedance-analyzer/ad5933.c:263:13:    expected
unsigned short [unsigned] dat
drivers/staging/iio/impedance-analyzer/ad5933.c:263:13:    got
restricted __be16 [usertype] <noident>
drivers/staging/iio/impedance-analyzer/ad5933.c:271:13: warning:
incorrect type in assignment (different base types)
drivers/staging/iio/impedance-analyzer/ad5933.c:271:13:    expected
unsigned short [unsigned] [addressable] dat
drivers/staging/iio/impedance-analyzer/ad5933.c:271:13:    got
restricted __be16 [usertype] <noident>
drivers/staging/iio/impedance-analyzer/ad5933.c:310:19: warning: cast to
restricted __be32
drivers/staging/iio/impedance-analyzer/ad5933.c:310:19: warning: cast to
restricted __be32
drivers/staging/iio/impedance-analyzer/ad5933.c:310:19: warning: cast to
restricted __be32
drivers/staging/iio/impedance-analyzer/ad5933.c:310:19: warning: cast to
restricted __be32
drivers/staging/iio/impedance-analyzer/ad5933.c:310:19: warning: cast to
restricted __be32
drivers/staging/iio/impedance-analyzer/ad5933.c:310:19: warning: cast to
restricted __be32
drivers/staging/iio/impedance-analyzer/ad5933.c:446:21: warning:
incorrect type in assignment (different base types)
drivers/staging/iio/impedance-analyzer/ad5933.c:446:21:    expected
unsigned short [unsigned] dat
drivers/staging/iio/impedance-analyzer/ad5933.c:446:21:    got
restricted __be16 [usertype] <noident>
drivers/staging/iio/impedance-analyzer/ad5933.c:454:21: warning:
incorrect type in assignment (different base types)
drivers/staging/iio/impedance-analyzer/ad5933.c:454:21:    expected
unsigned short [unsigned] [addressable] dat
drivers/staging/iio/impedance-analyzer/ad5933.c:454:21:    got
restricted __be16 [usertype] <noident>
drivers/staging/iio/impedance-analyzer/ad5933.c:548:23: warning: cast to
restricted __be16
drivers/staging/iio/impedance-analyzer/ad5933.c:548:23: warning: cast to
restricted __be16
drivers/staging/iio/impedance-analyzer/ad5933.c:548:23: warning: cast to
restricted __be16
drivers/staging/iio/impedance-analyzer/ad5933.c:548:23: warning: cast to
restricted __be16
Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Fix build warning, sizeof() called on dynamically
sized pointer, by removing the call and the dependent
function parameter. It is not needed or used in this
driver, when pushing values to an iio buffer.

Changes from v1
- Fix mistake in varible name
Signed-off-by: Reyad Attiyat <reyad.attiyat@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This patch fixes the following checkpatch.pl issues in gdm_usb.c:
ERROR: that open brace { should be on the previous line
Signed-off-by: Cihangir Akturk <cakturk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix sparse warnings:
drivers/staging/rtl8188eu/core/rtw_cmd.c:52:5: warning:
  symbol '_rtw_enqueue_cmd' was not declared. Should it be static?
drivers/staging/rtl8188eu/core/rtw_wlan_util.c:1225:5: warning:
  symbol 'wifirate2_ratetbl_inx' was not declared. Should it be static?
drivers/staging/rtl8188eu/hal/HalPhyRf_8188e.c:25:4: warning:
  symbol 'ODM_GetRightChnlPlaceforIQK' was not declared. Should it be static?
drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:3109:5: warning:
  symbol 'rtw_ioctl' was not declared. Should it be static?
Signed-off-by: Jeff Oczek <jeffoczek@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replacing MP_CLEAR_FLAG
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replacing MP_SET_FLAG
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

merge u32 flag into unsigned long Flags

Replacing fMP_DISCONNECTED with DEVICE_FLAGS_DISCONNECTED
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Just test FLag and remove not.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MP_IS_READY(fMP_DISCONNECTED) is used to block thread in vnt_tx_context
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed redundant comments from bssdb.h header file.
Signed-off-by: Igor Bezukh <igbzkh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed redundant comments in baseband.h header file.
Signed-off-by: Igor Bezukh <igbzkh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds a documentation file for all of the interfaces that were moved
to sysfs by the other patches in this set.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>