- 24 Nov, 2020 40 commits
-
-
Yongqiang Sun authored
[Why & How] Get internal display info from vbios and pass it to dmub fw to determine if multiple display optmization is needed. Signed-off-by:
Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by:
Tony Cheng <Tony.Cheng@amd.com> Acked-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
Aric Cyr <Aric.Cyr@amd.com> Acked-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Jacky Liao authored
[Why] The BLNDGAM memory blocks should be powered down when they're not in use. This will reduce power consumption. [How] 1. Write to BLNDGAM_MEM_PWR_FORCE to put memory to shutdown when BLNDGAM is not used. 2. Added a debug option to allow this behaviour to be turned off Signed-off-by:
Jacky Liao <ziyu.liao@amd.com> Reviewed-by:
Eric Yang <eric.yang2@amd.com> Acked-by:
-
Wyatt Wood authored
[Why] Need to clear sticky error bits generated during hpd irq from receiver. [How] Clear sticky vsc sdp error bit. Signed-off-by:
Wyatt Wood <wyatt.wood@amd.com> Reviewed-by:
-
Sherry authored
[Why] t9 delay func is called twice after setting power off, the unexpected action results in a doubling of the added 140ms t9 delay [How] If the backlight has been turned off, does not turn it off again Signed-off-by:
Sherry <Yao.Wang1@amd.com> Reviewed-by:
-
Eric Yang authored
Signed-off-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by:
-
Tashfique Abdullah authored
[Why] The MPCC may change and request data when the pipes are switching from 2 to 1 or 1 to 2. During the switch there is a possibility of underflow and flicker/missing data. [How] During VBlank the MPCC won't request data. The trick is to delay and wait on VBlank, ONLY when pipes are either turning on or off, right before MPCC is reset for the pipes. Signed-off-by:
Tashfique Abdullah <tabdullah@amd.com> Reviewed-by:
-
Jacky Liao authored
[Why] On some platforms, DMCU is no longer used. In these cases, some DMCU memory should be completely powered off to save power. [How] 1. Set DMCU_ERAM_MEM_PWR_FORCE to shutdown memory when DMCU is not in use 2. Added a debug option to allow this behaviour to be turned off 3. Set all memory low power debug options to off first, to not immediately cause problems Signed-off-by:
-
Yongqiang Sun authored
[Why & How] Enable stutter for DCN3.01. Signed-off-by:
Harry Wentland <Harry.Wentland@amd.com> Acked-by:
-
Chris Park authored
[Why] Incorrect panel register settings are applied for power sequence because the register macro is not defined in resource. [How] Implement same register space to future resource files. Signed-off-by:
Chris Park <Chris.Park@amd.com> Reviewed-by:
Joshua Aberback <Joshua.Aberback@amd.com> Acked-by:
-
Ashley Thomas authored
[Why] Some sink devices wish to have access to the minimum HBlank supported by the ASIC. [How] Make the ASIC minimum HBlank available in Source Device information address 0x340. Signed-off-by:
Ashley Thomas <Ashley.Thomas2@amd.com> Reviewed-by:
Wenjing Liu <Wenjing.Liu@amd.com> Acked-by:
-
Charlene Liu authored
[why] HDCP 1.4 failed on SL8800 SW w/a test driver use. [how] slower down the HW i2c speed when used by HW i2c. this request: each acquired_i2c_engine setup the i2c speed needed. and set the I2c engine for HDCP use at release_engine. this covers SW using HW I2c engine and HDCP using HW I2c engine. for dmcu using HW I2c engine, needs add similar logic in dmcufw. Signed-off-by:
Charlene Liu <Charlene.Liu@amd.com> Reviewed-by:
-
Christian König authored
Same as gmc9, basically filter the fault, reroute or handle it. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Christian König authored
Felix pointed out that we need this for Navi as well. Signed-off-by:
-
Christian König authored
Looks like we can't enabled the IH1/IH2 feature for Vega20, make sure retry faults are handled on a separate ring anyway. Signed-off-by:
-
Christian König authored
Seems like we won't get the hardware IH1/2 rings on Vega20 working. Signed-off-by:
-
Christian König authored
Add a soft IH ring implementation similar to the hardware IH1/2. This can be used if the hardware delegation of interrupts to IH1/2 doesn't work for some reason. Signed-off-by:
-
Christian König authored
Return early in case of a ratelimit and don't print leading zeros for the address. Signed-off-by:
-
Christian König authored
The address space is only 48bit, not 64bit. And the VMHUBs work with sign extended addresses. Signed-off-by:
-
Nirmoy Das authored
Use generic DMA api instead of bus-specific API. Signed-off-by:
Nirmoy Das <nirmoy.das@amd.com> Reviewed-by:
-
Nirmoy Das authored
Use generic DMA api instead of bus-specific API. Signed-off-by:
-
Jiansong Chen authored
Update GC golden setting for navy_flounder. Signed-off-by:
Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by:
Tao Zhou <tao.zhou1@amd.com> Signed-off-by:
-
Likun Gao authored
Update golden setting for sienna_cichlid. Signed-off-by:
Likun Gao <Likun.Gao@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix a couple of warnings by explicitly adding a break statement instead of letting the code fall through to the next case, and a fallthrough pseudo-keyword as a replacement for a /* fall through */ comment, Notice that Clang doesn't recognize /* fall through */ comments as implicit fall-through markings. Link: https://github.com/KSPP/linux/issues/115Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple warnings by explicitly adding multiple break statements instead of just letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple warnings by explicitly adding multiple fallthrough pseudo-keyword macros, as replacement for /* fall through */ comments. Notice that Clang doesn't recognize /* fall through */ comments as implicit fall-through markings. Link: https://github.com/KSPP/linux/issues/115Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple warnings by explicitly adding multiple break statements instead of just letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115Signed-off-by:
-
Rodrigo Siqueira authored
The HDCP feature requires at least one connector attached to the device; however, some GPUs do not have a physical output, making the HDCP initialization irrelevant. This patch disables HDCP initialization when the graphic card does not have output. Acked-by:
-
Alex Deucher authored
We only need to arbitrate VGA access on VGA compatible devices. Reviewed-by:
Feifei Xu <Feifei.Xu@amd.com> Signed-off-by:
-
Bernard Zhao authored
Fix check_patch.pl warning: WARNING: Prefer kmalloc_array over kmalloc with multiply +bps = kmalloc(align_space * sizeof((*data)->bps), GFP_KERNEL); WARNING: Prefer kmalloc_array over kmalloc with multiply +bps_bo = kmalloc(align_space * sizeof((*data)->bps_bo), GFP_KERNEL); kmalloc_array has multiply overflow check, which will be safer. Reviewed-by:
Bernard Zhao <bernard@vivo.com> Signed-off-by:
-
Bernard Zhao authored
Fix check_patch.pl warning: kmalloc_array uses number as first arg, sizeof is generally wrong. +fences = kmalloc_array(sizeof(void *), id_mgr->num_ids, GFP_KERNEL); Reviewed-by:
-
James Zhu authored
Support software ring share memory with vcn firmware. Signed-off-by:
James Zhu <James.Zhu@amd.com> Reviewed-by:
Leo Liu <leo.liu@amd.com> Signed-off-by:
-
James Zhu authored
Add dec software ring vm functions to support. Signed-off-by:
-
James Zhu authored
Add vcn software ring decode ring test and decode ib test. Signed-off-by:
-
James Zhu authored
Add macro, structure and function prototype to support vcn dec software ring. Signed-off-by:
-
James Zhu authored
refactor dec message functions to add dec software ring support. Signed-off-by:
-
Likun Gao authored
Default runtime logic not changed. Provide an alternative runtime method. (set 1 to use BACO; 2 to use BAMACO) When set reset_method to 4, it will use BACO or BAMACO for gpu reset, according to runpm value. Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Signed-off-by:
-
Likun Gao authored
Some features are still disabled after runtime pm resume. This can take the hardware back. Unlike other projects, this doesn't need pptable retransfer. Signed-off-by:
-
Sonny Jiang authored
The UVD firmware is copied to cpu addr in uvd_resume, so it should be used after that. This is to fix a bug introduced by patch drm/amdgpu: fix SI UVD firmware validate resume fail. Signed-off-by:
Sonny Jiang <sonny.jiang@amd.com> Reviewed-by:
-
Jinzhou Su authored
Using KIQ to map GFX queues instead of MMIO for gfx async ring, add missing doorbell range setting. v2: fix typo Signed-off-by:
Jinzhou.Su <Jinzhou.Su@amd.com> Reviewed-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
-
Kenneth Feng authored
This has been confirmed that unload message is not needed from SIENNA_CICHLID in reset. Otherwise it will cause the fw wrong state after reset and no response for any messages. Signed-off-by:
-
