- 20 Jun, 2013 40 commits
-
-
Gavin Shan authored
We possiblly have multiple kthreads running for multiple EEH errors (events) and use one spinlock to make the process of handling those EEH events serialized. That's unnecessary and the patch creates only one kthread, which is started during EEH core initialization time in eeh_init(). A new semaphore introduced to count the number of existing EEH events in the queue and the kthread waiting on the semaphore. Signed-off-by:
Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Gavin Shan authored
While doing EEH recovery, the PCI devices of the problematic PE should be removed and then added to the system again. During the so-called hotplug event, the PCI devices of the problematic PE will be probed through early/late phase. We would delay EEH probe on late point for PowerNV platform since the PCI device isn't available in early phase. Signed-off-by:
-
Gavin Shan authored
We shouldn't check that the returned PE status is exactly equal to (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE) but instead only check that they are both set. [benh: changelog] Signed-off-by:
-
Gavin Shan authored
The patch adds new EEH operation post_init. It's used to notify the platform that EEH core has completed the EEH probe. By that, PowerNV platform starts to use the services supplied by EEH functionality. Signed-off-by:
-
Gavin Shan authored
For EEH on PowerNV platform, we will do EEH probe based on the real PCI devices. The PCI devices are available after PCI probe. So we have to call eeh_init() explicitly on PowerNV platform after PCI probe. The patch also does EEH probe for PowerNV platform in eeh_init(). Signed-off-by:
-
Gavin Shan authored
There're several types of PEs can be supported for now: PHB, Bus and Device dependent PE. For PCI bus dependent PE, tracing the corresponding PCI bus from PE (struct eeh_pe) would make the code more efficient. The patch also enables the retrieval of PCI bus based on the PCI bus dependent PE. Signed-off-by:
-
Gavin Shan authored
While processing EEH event interrupt from P7IOC, we need function to retrieve the PE according to the indicated EEH device. The patch makes function eeh_pe_get() public so that other source files can call it for that purpose. Also, the patch fixes referring to wrong BDF (Bus/Device/Function) address while searching PE in function __eeh_pe_get(). Signed-off-by:
-
Gavin Shan authored
One of the possible cases indicated by P7IOC interrupt is fenced PHB. For that case, we need fetch the PE corresponding to the PHB and disable the PHB and all subordinate PCI buses/devices, recover from the fenced state and eventually enable the whole PHB. We need one function to fetch the PHB PE outside eeh_pe.c and the patch is going to make eeh_phb_pe_get() public for that purpose. Signed-off-by:
-
Gavin Shan authored
The patch moves the common part of EEH core into arch/powerpc/kernel directory so that we needn't PPC_PSERIES while compiling POWERNV platform: * Move the EEH common part into arch/powerpc/kernel * Move the functions for PCI hotplug from pSeries platform to arch/powerpc/kernel/pci-hotplug.c * Move CONFIG_EEH from arch/powerpc/platforms/pseries/Kconfig to arch/powerpc/platforms/Kconfig * Adjust makefile accordingly Signed-off-by: -
Gavin Shan authored
Cleanup on EEH core to remove unnecessary whitespaces. Signed-off-by:
-
Michael Neuling authored
Currently we only restore signals which are transactionally suspended but it's possible that the transaction can be restored even when it's active. Most likely this will result in a transactional rollback by the hardware as the transaction will have been doomed by an earlier treclaim. The current code is a legacy of earlier kernel implementations which did software rollback of active transactions in the kernel. That code has now gone but we didn't correctly fix up this part of the signals code which still makes assumptions based on having software rollback. This changes the signal return code to always restore both contexts on 64 bit signal return. It also ensures that the MSR TM bits are properly restored from the signal context which they are not currently. Signed-off-by:
Michael Neuling <mikey@neuling.org> cc: stable@vger.kernel.org (v3.9+) Signed-off-by:
-
Michael Neuling authored
Currently we only restore signals which are transactionally suspended but it's possible that the transaction can be restored even when it's active. Most likely this will result in a transactional rollback by the hardware as the transaction will have been doomed by an earlier treclaim. The current code is a legacy of earlier kernel implementations which did software rollback of active transactions in the kernel. That code has now gone but we didn't correctly fix up this part of the signals code which still makes assumptions based on having software rollback. This changes the signal return code to always restore both contexts on 32 bit rt signal return. Signed-off-by:
-
Michael Neuling authored
Currently we clear out the MSR TM bits on signal return assuming that the signal should never return to an active transaction. This is bogus as the user may do this. It's most likely the transaction will be doomed due to a treclaim but that's a problem for the HW not the kernel. The current code is a legacy of earlier kernel implementations which did software rollback of active transactions in the kernel. That code has now gone but we didn't correctly fix up this part of the signals code which still makes the assumption that it must be returning to a suspended transaction. This pulls out both MSR TM bits from the user supplied context rather than just setting TM suspend. We pull out only the bits needed to ensure the user can't do anything dangerous to the MSR. Signed-off-by:
-
Michael Neuling authored
Currently sys_sigreturn() is TM unaware. Therefore, if we take a 32 bit signal without SIGINFO (non RT) inside a transaction, on signal return we don't restore the signal frame correctly. This checks if the signal frame being restoring is an active transaction, and if so, it copies the additional state to ptregs so it can be restored. Signed-off-by:
-
Michael Neuling authored
The MSR TM controls are in the top 32 bits of the MSR hence on 32 bit signals, we stick the top half of the MSR in the checkpointed signal context so that the user can access it. Unfortunately, we don't currently write anything to the checkpointed signal context when coming in a from a non transactional process and hence the top MSR bits can contain junk. This updates the 32 bit signal handling code to always write something to the top MSR bits so that users know if the process is transactional or not and the kernel can use it on signal return. Signed-off-by:
-
Benjamin Herrenschmidt authored
This is duplicated code from math-emu and implements such a small subset of the FPU (load/stores/fmr) that it's essentially pointless nowdays. Signed-off-by: -
Benjamin Herrenschmidt authored
(Including 64-bit ones) This allow SW emulation by the kernel of optional instructions such as fsqrt which aren't implemented on some processors, and thus fixes some Fedora 19 issues such as Anaconda since the compiler is set to generate those by default on 64-bit. Signed-off-by: -
Benjamin Herrenschmidt authored
The decoding of some instructions such as fsqrt{s} was incorrect, using the wrong registers, and thus could not work. This fixes it and also adds a couple of place holders for missing instructions. Signed-off-by: -
Aruna Balakrishnaiah authored
This patch exploits pstore subsystem to read details of common partition in NVRAM to a separate file in /dev/pstore. For instance, common partition details will be stored in a file named [common-nvram-6]. Signed-off-by:
Aruna Balakrishnaiah <aruna@linux.vnet.ibm.com> Reviewed-by:
Jim Keniston <jkenisto@us.ibm.com> Signed-off-by:
-
Aruna Balakrishnaiah authored
This patch set exploits the pstore subsystem to read details of of-config partition in NVRAM to a separate file in /dev/pstore. For instance, of-config partition details will be stored in a file named [of-nvram-5]. Signed-off-by:
-
Aruna Balakrishnaiah authored
Introduce os_partition member in nvram_os_partition structure to identify if the partition is an os partition or not. This will be useful to handle non-os partitions of-config and common. Signed-off-by:
-
Aruna Balakrishnaiah authored
This patch set exploits the pstore subsystem to read details of rtas partition in NVRAM to a separate file in /dev/pstore. For instance, rtas details will be stored in a file named [rtas-nvram-4]. Signed-off-by:
-
Aruna Balakrishnaiah authored
IBM's p series machines provide persistent storage for LPARs through NVRAM. NVRAM's lnx,oops-log partition is used to log oops messages. Currently the kernel provides the contents of p-series NVRAM only as a simple stream of bytes via /dev/nvram, which must be interpreted in user space by the nvram command in the powerpc-utils package. This patch set exploits the pstore subsystem to expose oops partition in NVRAM as a separate file in /dev/pstore. For instance, Oops messages will be stored in a file named [dmesg-nvram-2]. In case pstore registration fails it will fall back to kmsg_dump mechanism. This patch will read/write the oops messages from/to this partition via pstore. Signed-off-by:
-
Aruna Balakrishnaiah authored
Introduce generic read function to read nvram partitions other than rtas. nvram_read_error_log will be retained which is used to read rtas partition from rtasd. nvram_read_partition is the generic read function to read from any nvram partition. Signed-off-by:
-
Aruna Balakrishnaiah authored
Introduce version and timestamp information in the oops header. oops_log_info (oops header) holds version (to distinguish between old and new format oops header), length of the oops text (compressed or uncompressed) and timestamp. The version field will sit in the same place as the length in old headers. version is assigned 5000 (greater than oops partition size) so that existing tools will refuse to dump new style partitions as the length is too large. The updated tools will work with both old and new format headers. Signed-off-by:
-
Aruna Balakrishnaiah authored
Removal of syslog prefix in the uncompressed oops text will help in capturing more oops data. Signed-off-by:
-
Gavin Shan authored
Under some special circumstances, the EEH device doesn't have the associated device tree node or PCI device. The patch enhances those functions converting EEH device to device tree node or PCI device accordingly to avoid unnecessary system crash. Signed-off-by:
-
Gavin Shan authored
While running Linux as guest on top of phyp, we possiblly have PE that includes single PCI device. However, we didn't return its PCI bus correctly and it leads to failure on recovery from EEH errors for single-dev-PE. The patch fixes the issue. Cc: <stable@vger.kernel.org> # v3.7+ Cc: Steve Best <sbest@us.ibm.com> Signed-off-by:
-
Anton Blanchard authored
On newer CPUs we use VSX loads and stores to the thread->fpr array. For best performance we need to ensure 16 byte alignment. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
liguang authored
orderly_poweroff is expecting a bool parameter, so use 'true' instead '1' Signed-off-by:
liguang <lig.fnst@cn.fujitsu.com> Signed-off-by:
-
liguang authored
'system_state < SYSTEM_RUNNING' will have same effect with 'system_state == SYSTEM_BOOTING', but the later one is more clearer. Signed-off-by:
-
Bharat Bhushan authored
On BookE (Branch taken + Single Step) is as same as Branch Taken on BookS and in Linux we simulate BookS behavior for BookE as well. When doing so, in Branch taken handling we want to set DBCR0_IC but we update the current->thread->dbcr0 and not DBCR0. Now on 64bit the current->thread.dbcr0 (and other debug registers) is synchronized ONLY on context switch flow. But after handling Branch taken in debug exception if we return back to user space without context switch then single stepping change (DBCR0_ICMP) does not get written in h/w DBCR0 and Instruction Complete exception does not happen. This fixes using ptrace reliably on BookE-PowerPC lmbench latency test (lat_syscall) Results are (they varies a little on each run) 1) ./lat_syscall <action> /dev/shm/uImage action: Open read write stat fstat null Before: 3.8618 0.2017 0.2851 1.6789 0.2256 0.0856 After: 3.8580 0.2017 0.2851 1.6955 0.2255 0.0856 1) ./lat_syscall -P 2 -N 10 <action> /dev/shm/uImage action: Open read write stat fstat null Before: 4.1388 0.2238 0.3066 1.7106 0.2256 0.0856 After: 4.1413 0.2236 0.3062 1.7107 0.2256 0.0856 [ Slightly modified to avoid extra branch in the fast path on Book3S and fix build on all non-BookE 64-bit -- BenH ] Signed-off-by:
Bharat Bhushan <bharat.bhushan@freescale.com> Signed-off-by:
-
Bharat Bhushan authored
Signed-off-by:
-
Alexey Kardashevskiy authored
The enables VFIO on the pSeries platform, enabling user space programs to access PCI devices directly. Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
Paul Mackerras <paulus@samba.org> Acked-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Alexey Kardashevskiy authored
VFIO implements platform independent stuff such as a PCI driver, BAR access (via read/write on a file descriptor or direct mapping when possible) and IRQ signaling. The platform dependent part includes IOMMU initialization and handling. This implements an IOMMU driver for VFIO which does mapping/unmapping pages for the guest IO and provides information about DMA window (required by a POWER guest). Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
-
Alexey Kardashevskiy authored
This initializes IOMMU groups based on the IOMMU configuration discovered during the PCI scan on POWERNV (POWER non virtualized) platform. The IOMMU groups are to be used later by the VFIO driver, which is used for PCI pass through. It also implements an API for mapping/unmapping pages for guest PCI drivers and providing DMA window properties. This API is going to be used later by QEMU-VFIO to handle h_put_tce hypercalls from the KVM guest. The iommu_put_tce_user_mode() does only a single page mapping as an API for adding many mappings at once is going to be added later. Although this driver has been tested only on the POWERNV platform, it should work on any platform which supports TCE tables. As h_put_tce hypercall is received by the host kernel and processed by the QEMU (what involves calling the host kernel again), performance is not the best - circa 220MB/s on 10Gb ethernet network. To enable VFIO on POWER, enable SPAPR_TCE_IOMMU config option and configure VFIO as required. Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
-
Alistair Popple authored
The currituck board uses a different IRQ for the pci usb host controller depending on the board revision. This patch adds support for newer board revisions by retrieving the board revision from the FPGA and mapping the appropriate IRQ. Signed-off-by:
Alistair Popple <alistair@popple.id.au> Acked-by:
Tony Breeds <tony@bakeyournoodle.com> Signed-off-by:
-
Michael Neuling authored
Check truncate_if_32bit() on final write to nip. Signed-off-by:
-
Alistair Popple authored
Update default configurations for systems with CONFIG_BOOTX_TEXT selected so that they continue to print early debug messages as is currently the case. Signed-off-by:
-
Alistair Popple authored
Signed-off-by:
-
