- 09 Mar, 2007 40 commits
-
-
Kristian Høgsberg authored
The *Clear registers returns the masked value when read which is what we want. Signed-off-by:
Kristian Høgsberg <krh@redhat.com> Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de>
-
Kristian Høgsberg authored
Signed-off-by:
-
Kristian Høgsberg authored
Pointed out by Pete Zaitcev. Signed-off-by:
-
Kristian Høgsberg authored
Signed-off-by:
-
Kristian Høgsberg authored
Signed-off-by:
-
Kristian Høgsberg authored
Signed-off-by:
-
Kristian Høgsberg authored
This lets the SCSI stack retry the command when a SCSI command is interrupted by a FireWire bus reset. Signed-off-by:
-
Kristian Høgsberg authored
This prevents superfluous bus traffic as fw-sbp2 logs in only to get kicked off the device by another bus reset as the driver core does bus management. Scheduling it this way lets the driver core finish bus management before higher level drivers get the update callback. Signed-off-by:
-
Kristian Høgsberg authored
Sometimes we reconnect too soon, sometimes too late. Adding a retry mechanism make the reconnect step much more robust. Signed-off-by:
-
Kristian Høgsberg authored
When a management ORB times out, either because the fw_transaction times out or when we don't get the status write, we need to properly cancel the entire operation. Signed-off-by:
-
Kristian Høgsberg authored
Drivers such as fw-sbp2 had no way to properly cancel in-progress transactions, which could leave a pending transaction or an unset packet in the low-level queues after kfree'ing the containing structure. fw_cancel_transaction() lets drivers cancel a submitted transaction. Signed-off-by:
-
Kristian Høgsberg authored
Signed-off-by:
-
Kristian Høgsberg authored
The old DMA program for receiving async packets stops DMA while processing received packets and only expects one packet per interrupt. Stopping DMA can silently drop packets and we need to handle multiple received packets per interrupt. This new version keeps DMA running at all times and just append new pages as buffers fill up, and supports multiple packets per interrupt. Signed-off-by:
-
Stefan Richter authored
Signed-off-by: -
Kristian Høgsberg authored
Signed-off-by:
-
Kristian Høgsberg authored
Signed-off-by:
-
Kristian Høgsberg authored
Signed-off-by:
-
Kristian Høgsberg authored
Drop the negative errnos and use RCODEs for all error codes in the complete transaction callback. Signed-off-by:
-
Kristian Høgsberg authored
Signed-off-by:
-
Kristian Høgsberg authored
Signed-off-by:
-
Kristian Høgsberg authored
Signed-off-by:
-
Kristian Høgsberg authored
Signed-off-by:
-
Kristian Høgsberg authored
Signed-off-by:
-
Stefan Richter authored
drivers/firewire/fw-topology.c: In function `report_found_node': drivers/firewire/fw-topology.c:345: error: `typeof' applied to a bit-field drivers/firewire/fw-topology.c:345: error: `typeof' applied to a bit-field Signed-off-by: -
Kristian Høgsberg authored
Signed-off-by:
-
Stefan Richter authored
Copied from sbp2: - enable spin-up by START STOP UNIT for all devices - enable INQUIRY (36) workaround on demand - prefer READ/ WRITE (10) over (6) for all devices - prefer MODE SENSE (10) for MMC devices Signed-off-by: -
Stefan Richter authored
Definitions as per IEEE 1212 and IEEE 1394: Node ID: Concatenation of bus ID and local ID. 16 bits long. Bus ID: Identifies a particular bus within a group of buses interconnected by bus bridges. Local ID: Identifies a particular node on a bus. PHY ID: Local ID of IEEE 1394 nodes. 6 bits long. Never ever use a variable called node_id for anything else than a node ID. Signed-off-by: -
Stefan Richter authored
Cleans up after patch "Add PCI class ID for firewire OHCI controllers". Signed-off-by:
-
Stefan Richter authored
Signed-off-by:
-
Stefan Richter authored
There is no emulation going on here too. Signed-off-by:
-
Stefan Richter authored
"goto out" happens with the lock taken. Signed-off-by:
-
Stefan Richter authored
Signed-off-by:
-
Stefan Richter authored
Signed-off-by:
-
Adrian Bunk authored
This patch contains the following cleanups: - "extern inline" -> "static inline" - fw-topology.c: make struct fw_node_create static Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Stefan Richter authored
Instances of struct file_operations and struct fw_card_driver can be qualified as "const". Ditto with struct fw_descriptor.data, struct fw_device_id, and predefined instances of struct fw_address_region, at least in the current implementation. Data qualified as const is placed into the .rodata section which won't be mixed with dirty data. Signed-off-by: -
Stefan Richter authored
Signed-off-by: -
Stefan Richter authored
Screenshot from "make menuconfig": ... ?????????????????????? IEEE 1394 (FireWire) support ??????????????????????? ? Arrow keys navigate the menu. <Enter> selects submenus --->. ? ... ? ??????????????????????????????????????????????????????????????????????? ? ? ? <M> IEEE 1394 (FireWire) support (JUJU alternative stack, experim? ? ? ? <M> Support for OHCI firewire host controllers ? ? ? ? <M> Support for storage devices (SBP-2 protocol driver) ? ? ? ? <M> IEEE 1394 (FireWire) support ? ? ? ? --- Subsystem Options ? ? ? ? [ ] Excessive debugging output ? ? ... ? <Select> < Exit > < Help > ? ??????????????????????????????????????????????????????????????????????????? Signed-off-by: -
Stefan Richter authored
Replace __fw_core_h by __fw_transaction_h to match the file name. Add comments to the final #endif in header files. Signed-off-by: -
Stefan Richter authored
Correct a typo. Also spell FireWire consistently. Signed-off-by: -
Stefan Richter authored
The new stack is not yet stable WRT functionality and APIs. Signed-off-by:
-
